Used Milling machines - univ.conv. 0-399mm X-axis travel for sale (67)

Condition: as good as new (ex-display), Universal milling machine Make: OPTImill Model: MZ 4 SV Item No.: 3346245 Year of manufacture: 2019 - Demonstration machine Serial No.: 1910591 Travel distances: - X-axis: 600 mm (automatic: 560 mm) - Y-axis: 480 mm (automatic: 440 mm) - Z-axis: 390 mm (automatic: 350 mm) Standard equipment includes: - 3-axis digital readout - Automatic feed on all 3 axes stepless from 10 to 600 mm/min - Fixed table 900 x 500 mm (T-slot 14 mm) - Vertical milling head SK 40 with drawbar thread M16 - Splash guard enclosure - Machine lamp - Centralized lubrication, electric - Support with counter-bearing for horizontal milling - Coolant system - Operating tools - Operating manual Godpsw I Efyofx Afiekc Including the option: pneumatic tool clamping Including the option: Vario conversion with Siemens inverter drive Sinamics G 110M Stepless speed from 48 to 3,045 rpm via 2 x 6 gear stages

Condition: good (used), Year of construction: 1996, x-travel: 380 mm y-travel: 140 mm quill stroke: 40 mm table-size: 630 x 150 mm Gkjdpfxsua E Nas Afiec spindle taper MT: 2 voltage: 380/400 V

Condition: good (used), Manufacturer: WMW VEB Tip: FW 200×630 Gkjdpfx Ajik Hcuefisc x-y-z: 380 - 140 - 230 mm. Table size: 200x630mm

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine no.: 52185 Year of manufacture: 1968 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 250 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.4 kW, pole-switchable Mains connection: 380 Volt, 50 Hz - Feed on X and Z axes - Two motor speeds and 8 gearbox speeds - Quill stroke on vertical milling head: 60 mm Gkodpedzqb Sefx Afioc - Fixed angle table - Coolant system in the machine base - Free-standing control cabinet - Counter support with counter bearing for horizontal milling SK 40 Required space (L x W x H): 1200 x 1100 x 1600 mm Weight: approx. 1000 kg Very good condition

Condition: used, Macmon M100 Universal Milling Machine - Feed range in steps: 9–450 mm/min - Horizontal spindle speed: 40–2000 rpm - 21 vertical spindle speeds: 50–2500 rpm - Spindle taper: SK40 - Quill overhang: approx. 100–320 mm - Clearance under spindle: 350 mm - Vertical head quill diameter: 70 mm - Vertical head swivels 360° - Fixed angle table: 215 x 600 mm - Cross travel (manual): 170 mm - Vertical travel motor/manual: 310/340 mm - Longitudinal travel motor/manual: 290/310 mm - X-axis travel: 310 mm - Y-axis travel: 340 mm - Z-axis travel: 170 mm - Automatic feed and rapid traverse on all 3 axes Gedpfx Ajw Rn Ipsfijkc - Total power requirement: 2.5 kW - Spindle drive: 2.2 kW - Total drive: 2.5 kW, 380V, 50Hz - 3-axis digital readout - Dimensions (LxWxH): 1.5 x 0.7 x 1.5 m - Weight: 900 kg

Year of construction: 1969, condition: good (used), Univ. tool milling machine DECKEL type FP 1 Machine No. 37101 Year of construction approx. 1969 travel X: 300 mm Y: 150 mm Z: 340 mm table size 600 x 200 mm spindle mounting MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 1,0 and 1,5 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - pinol shift at vertical milling head 60 mm - adjacent control cabinet space requirement L x W x H 1000 x 900 x 1750 mm weight 690 kg good condition Gkjdpfsl Dx I Sox Afijc accessories: - collets - rotary table - vice - Counterholder H. Milling

Condition: used, Year of construction: 1990, Year ca 1990 fabric-no. 42965 Gkedpsvu Hi Aofx Afiec x-travel 500 mm y-travel 400 mm quill stroke 300 mm weight 3,8 t

Condition: like new (used), Year of construction: 2021, Optimum OPTImill MZ 2S tool milling machine Ideal for training workshops!!! Available now With digital 3-axis position display DP 700 from NEWALL. With inverter drive of the feed axes controllable via the control panel. Versatile range of applications Excellent damping properties and stability of the machine frame All guides are hardened and precision-ground and can be adjusted using wedge strips Automatic feed in X-, Y- and Z-axis, infinitely adjustable via an electronic joystick on the control panel Electric feed limit stop Ball screw in all axes Central and clearly arranged control panel with integrated digital position and speed display Massive cross table, generously dimensioned and precisely surface-machined with 5 T-slots Coolant device Large handwheels with scale Machine lamp Smooth running Manual central lubrication TECHNICAL DATA Dimensions and weights Length (product) approx. 1239mm Width/depth (product) approx. 1168mm Height (product) approx. 1900mm Weight (net) approx. 1400kg Drilling/milling head Milling head swivel range ± 90 Drilling/milling capacity Cutter head size max. 100mm Drilling capacity steel (S235JR) 30mm Continuous drilling capacity steel (S235JR) 26mm End mill size max. 25mm Electrical data Drive motor power 2.2kW Supply voltage 400V Mains frequency 50Hz Horizontal milling table Horizontal milling table length 750mm Horizontal milling table width 320mm Distance vertical spindle - horizontal milling table min. 75mm Distance vertical spindle - horizontal milling table max. 410mm Horizontal milling table T-slots size 14mm Horizontal milling table T-slots quantity 5 Horizontal milling table T-slots distance 63mm Distance horizontal spindle - horizontal milling table min. 70mm Gkjdpfjuqix Ujx Afisc Distance horizontal spindle - horizontal milling table max. 400mm Horizontal milling table max. load 285kg Vertical milling table Vertical milling table length 830mm Vertical milling table width 250mm Vertical milling table T-slots size 14mm Vertical milling table T-slots quantity 2 Vertical milling table T-slots distance 63mm Coolant system Coolant pump(s) Drive power 95W Travel distance Manual X-axis travel 400mm Manual Y-axis travel 200mm Manual Z-axis travel 335mm Travel path X-axis automatic approx. 310mm Travel path Y-axis automatic approx. 160mm Travel Z-axis automatic 295mm Vertical spindle Vertical spindle throat depth 100mm Vertical spindle Spindle holder ISO 40 DIN 2080 Vertical spindle Speed range 50 - 1890min¯¹ Vertical spindle Number of speed ranges 12 steps Vertical spindle Tightening bar M 16 Vertical spindle Quill stroke 120mm Vertical spindle Load max. 1100Nm Feed speed Bjpvld3Hbf Feed speed X-axis 10 - 600mm/min Feed speed Y-axis 10 - 600mm/min Feed speed Z-axis 10 - 600mm/min Electrical connection Total connected load 4kW Motor(s) Rapid traverse X-axis power drive motor 0.375kW Rapid traverse Y-axis power drive motor 0.375kW Rapid traverse Z-axis power drive motor 0.375kW

Condition: used, Year of construction: 1972, x-travel 300 mm y-travel 350 mm z-travel 150 mm total power requirement 2,5 kW Gsdpfxot Hw Ipo Afijkc weight of the machine ca. 700 kg dimensions of the machine ca. m

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 28317 Year of construction approx. 1960 travel X: 245 mm Y: 150 mm Z: 340 mm table size 600 x 210 mm spindle admission horizontal MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 0,8 and 1,1 kW pole-changing Gkedpfoiy Ekvsx Afijc Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - Pinol shift at vertical milling head 60 mm - vertical milling head +/- 90° tiltable - Metal base made of angle iron with machine feet space requirement L x W x H 1100 x 900 x 1650 mm weight 650 kg good condition

Condition: refurbished (used), Digital display: 3-axis Spindle mount: SK40 Gksdjwx Nqcepfx Afiec Spindle speed: 40-2000 rpm Travel: X 300 mm, Y 160 mm, Z 340 mm

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed very good CONDITION Technical data: >> Year of construction 1990 Machine no. 2102-5046 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electrical central lubrication Gkodpfxou Um Ero Afijc >> Coolant device >> Operating instructions, spare parts plan Gojs3G About the machine : Universal milling machine Deckel FP1 built in 1990 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: used, Year of construction: 1994, weight je 6 t 2 ja Gsdpfeu T Sfhjx Afijkc ja control Siemens

Condition: good (used), For sale: Optimum OPTImill MF 2 Vario universal milling machine from training workshop – very well maintained, with low operating hours Gedow A Rg Tjpfx Afiekc Manufacturer: Optimum Model: Universal Milling Machine OPTImill MF 2 Vario Year of manufacture: 2007 Condition: used, good Technical specifications: - Motor: 1.5 kW, 400V ~50Hz - Drilling capacity in steel (St.37): Ø 24 mm - Continuous drilling capacity in steel (St.37): Ø 20 mm - Spindle taper: ISO 40 (DIN 2080, DIN 69871) - Cutter head size: Ø 76 mm - End mill size: Ø 18 mm - Quill travel: 127 mm - Throat: 213–533 mm - Spindle head tilting range: 45° - Variable speed range: 10 – 5100 rpm - Spindle speed: 6 steps, infinitely variable - Automatic quill feed: 0.04 / 0.08 / 0.15 mm/rev - Table size (LxW): 1244 x 230 mm - Manual Z-axis travel: 406 mm - Manual Y-axis travel: 305 mm - Automatic X-axis travel: 800 mm - Table load capacity: 230 kg - T-slot size/spacing: 16 mm / 63 mm - Spindle – table distance: 57 – 463 mm - Dimensions (L x W x H): 1400 x 1450 x 2150 mm - Total weight: 950 kg Included in delivery: – Coolant system – Chip tray – Automatic table feed, X-axis – Operating tools – Machine vice

Condition: good (used), functionality: fully functional, DECKEL FP1 Active milling machine Manufacturer: Deckel Type: FP1 Active Condition: very good Control type conventional Control active HEIDENHAIN TNC X-path 300 mm Y-path 160 mm Gsdpfjwp Hikex Afiokc Z-path 340 mm Tool holder SK40 Speed 40-2000 rpm. Control Active HEIDENHAIN TNC Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. TBH 1200x1100x1600 mm

Condition: used, Universal tool milling machine, milling machine MAHO type MH 400 P Mach. No. 41364, year of manufacture 1981 Control Heidenhain TNC 125 (active digital) Travel paths with feed X: 360 mm, Y: 200 mm, Z: 375 mm Travel paths with handwheel X: 400 mm, Y: 250 mm, Z: 375 mm Table size 690 x 270 mm Spindle mount ISO 40 Tool clamp hydraulic Spindle speed 40 - 2500 rpm, continuously variable Gkedpfx Asf A Srzefijc Feed X and Z axis 5 - 1000 mm/min, continuously variable Feed Y axis 5 - 670 mm/min, continuously variable Rapid traverse X + Z = 1.2 m/min., Z = 0.8 m/min. Spindle displacement vertical 50 mm Spindle drive 2.2 kW Power supply 380 volts, 50 Hz - conventional handwheels for X, Y, Z - electrical control cabinet fixed to the machine - coolant system in the machine base - vertical milling head with drilling spindle - counter bearing for horizontal milling - operating instructions Space requirement L x W x H 1700 x 1100 x 1820 mm Weight approx. 900 kg good condition

Condition: reconditioned (used), Year of construction: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1984 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2101-1067 Milling head type: 2171 Milling head number: 1086 with guarantee geometric acceptance with test report Accessories: Gksdpfx Ajchfyfofiec - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X and Z axis - Fixed table 600 x 200 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions - used as seen -

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1983 Machine no. 2102-2444 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Gksdpfx Afjtwlwzjisc Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1983 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this little gem under power on site.

Condition: used, Year of construction: 1977, x-travel 700 mm Gkedpfx Ajqh Ehtofiec

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of construction: approx. 1967 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 2100 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.6 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed adjustment via 2 motor speeds and 8 gearbox steps - Quill travel on vertical milling head 60 mm Gkjdpfx Aoghtvasfijc - Fixed angle table - Separate control cabinet beside the machine Required space (L x W x H): 1100 x 1100 x 1600 mm Weight: 650 kg Good condition

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP2 in special paint finish light gray with 3-axis digital display K+C NEW Technical data: >> Machine no. 5983 Year of construction approx. 1975 >> Rigid angular table (newly revised) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2,2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital display K+C Newly assembled with manufacturer's warranty. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Operating instructions for digital display >> Coolant device Gksdpju I Rm Njfx Afisc To the machine : We offer a universal milling machine Deckel FP2 in good condition. The Deckel has very little crank play and all spindles can be moved easily. The machine has been completely dismantled and repainted. An oil change has been carried out. Mechanically and electrically tested. The digital display from K+C makes work easier and even more accurate. You also have a 1 year guarantee on the new digital display. Take the opportunity to inspect and try out the lids on site under power. The machine is available immediately.

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Weight 5500 kg Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm Gkodpfxswm Rqao Afiec travel -z axis 510 mm

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine No. 33064 Year of manufacture approx. 1960, overhauled in 2012 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: MK 4 - S20 x 2 Godpedzp T Ejfx Afiokc Vertical spindle speed: 95–1900 rpm, 12 steps Horizontal spindle speed: 60–1200 rpm, 12 steps Motor power: 1.1 and 1.4 kW Power supply: 380 Volt, 50 Hz - Feed on X and Y axes - Quill adjustment on the vertical milling head - Fixed angle table - Coolant system with mechanical pump in the machine base - Separate control cabinet with cable connector Space requirement L x W x H: 1100 x 900 x 1600 mm Weight: approx. 900 kg Good condition Machine was overhauled in 2012

Condition: used, Year of construction: 1973, Weight 3 t x-travel 1000 mm Gsdpfxewzyt Ts Afiokc 110 milling-head swivable +/- ja

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine no. No. 34338 Year of construction approx. 1965 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Gjdpfx Afoic R I Reiekc Spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm 12 steps Motor power 1.0 and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout HEIDENHAIN, type VRZ 753 B - Spindle speed via 2 motor speeds and 6 gear stages - Feed in the X- and Z-axis - Coolant device with mechanical pump in the machine base - Pinol displacement on the vertical milling head 60 mm - Pivoting, rotating and tilting angled table - Adjacent control cabinet Space requirement L x W x H 1000 x 900 x 1750 mm weight 690 kg good condition