Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 135001, travel distance X-axis: 1,350 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time between September 21st and October 1st! TECHNICAL DETAILS Travel in X-axis: 1,350 mm Travel in Y-axis: 620 mm Travel in Z-axis: 810 mm Feed rate and rapid traverse Feed rate X/Y/Z-axis: 15 m/min Rapid traverse X/Y/Z-axis: 30 m/min Spindle Spindle speed: 12,000 rpm Fsdpfjzqunusx Akvegf Spindle drive power: 10 kW (100% ED) Spindle drive power: 12 kW (40% ED) Spindle mounting: ISO 40 Spindle bearing diameter (front): 70 mm Spindle bearing diameter (rear): 60 mm Spindle operating hours: 6,510 h Distance from spindle to table: 90 – 900 mm Distance from spindle center to machine frame: 655 mm Tool magazine Tool magazine capacity: 40 Max. tool length: 300 mm Max. tool diameter with occupied neighboring positions: 80 mm Max. tool diameter with free neighboring position: 125 mm Work table Table length: 1,550 mm Table width: 620 mm Number of table slots: 6 Control system Control system manufacturer: HEIDENHAIN Control system model: iTNC 530 MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 63 A Rated apparent power: 35 kVA Dimensions and weight Overall length: 7,000 mm Overall width: 2,700 mm Overall height: 2,900 mm Machine weight: 8,650 kg EQUIPMENT - Dividing head, 4th and 5th axis, manufacturer WALTER, type TANIH 200 - LANG 5-axis clamping system - RENISHAW measuring probe - Chip conveyor - Documentation and manuals External reference: Wahl - Lot 69 Note: without the machine vice located on the clamping surface.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: 640M, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of slots in tool magazine: 120, number of axes: 5, This 5-axis Mazak Variaxis 630-5X was manufactured in 2003. It features a maximum X-axis travel of 630 mm, Y-axis travel of 765 mm, and Z-axis travel of 510 mm. The machine is equipped with a tool magazine holding 120 positions and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Mazak Variaxis 630-5X vertical machining centre we have for sale. Contact us for further details. • Table size: 500 × 500 mm • Tool magazine capacity: 120 positionsCondition • Machine in working condition • Complete and fully operational • Sale due to reallocation of production assetsAvailability / Sale terms Fgedpfx Akey Ey N Nsvsf • EXW sale • Technical documentation available upon request • Available for commercial valuation • Possible technical inspection / site visit • Direct purchase negotiations possible Additional equipment • Pallet system: Palletech – 12 stations + 2 loading/unloading stations • Renishaw workpiece probe • Laser tool presetting • High-pressure coolant system: 18 bar • Belt-type chip conveyor

Condition: used, Year of construction: 2008, Control OKUMA OSP-P200M. Cooling threw spindle. Rotating axe A Tsudakoma 250. Chip conveyor RENISHAW OMP40 Tool probe Velikost upínací plochy 1000 x 460 mm Rozsah pojezdů os: Axe X 762 mm Axe Y 460 mm Axe Z 460 mm Spindle revolutions 50 - 8000 rpm DIN 40 Fgodozqtbgjpfx Akvef Number of tool positions 48 Machine dimensions 2805 x 2160 x 2746 mm Machine weight 7100 kg

Condition: excellent (used), Year of construction: 2023, Traverses X Y Z; 1050 x 570 x 510mm, Table size 1300 x 570mm, min-max height spindle to table 150-660mm, spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, Fsdpfx Akezqtb Hjvsgf spindle power 18.5 kW, Fanuc control, Through Spindle Coolant, swarf conveyor

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 4,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 750 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 4,000 mm, total width: 6,400 mm, overall weight: 27,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 28,000 W, product length (max.): 10,200 mm, number of axes: 3, This 3-axis STAMA MC 546/S was manufactured in 2001. It features a powerful main spindle motor with a maximum speed of 6,000 RPM and a torque of 840 Nm. The machine is equipped with Siemens control and motors for precise operation. If you are looking to get high-quality machining capabilities, consider the STAMA MC 546/S vertical machining centre we have for sale. Contact us for further details. - Throat Depth: 890 mm- Table to Spindle Nose Min.: 450 mm- Table to Spindle Nose Max.: 1200 mm- Max. Workpiece Weight: 15 kg- Table Clamping Surface Length: 4500 mm- Table Clamping Surface Width: 840 mm- T-Slots: 2 (22 DIN 650)- Slot Width: 22H12/H7- Slot Distance: 700 mm- Table Height Above Floor: 890 mm- Required Floor Area (L x W x H): 10.2 m x 6.4 m x 4.0 m- Total Weight: 27,400 kg- Connected Load: 50 kVA- Total Power Requirement: 50 kW- Voltage: 400 V (3~, 50 Hz)- Rated Current: 80 A- Spindle Bearing Diameter: 95 mm- Tool Taper / Holder: SK50- Max. Torque: 840 Nm with gear ratio i=4 (at 40% ED)- Spindle Speed Range: 36 - 6000 rpm- Tool Magazine Capacity: 60 tools- Tool Clamping Force: 20,000 N- Max. Tool Diameter: 180 mm- Max. Tool Length: 400 mm- Feed Rates (X, Y, Z): 1 - 10,000 mm/min- Rapid Traverse Rates (X / Y / Z): 30 m/min / 30 m/min / 22 m/min- Max. Feed Force (X / Y / Z): 12,000 N / 12,000 N / 18,000 N- Max. Milling Capacity: 1,000 cm³- Max. Drilling Diameter: 90 mm- Max. Tapping Diameter: M40- Included features: Weekend switch-off circuit; internal lighting- Not included: Clamping table; vices Technical Specification Fsdpfsy Nk T Tsx Akvogf Taper Size SK 50

Condition: used, Year of construction: 1996, Table size 1600 x 650 mm X/Y/Z - 1300/650/660 mm Fgsdjzr Drfepfx Akvjf Spindle taper BT 50 Spindle speeds 6000 rpm No. of pockets in tool changer 30 pcs. Control: Enshu/Fanuc Equipped with: Rotary table as 4th. axis 28 tool holders

Condition: used, Year of construction: 2009, x-travel 2.360/2x 930 mm y-travel 600 mm z-travel 600 mm table surface area 2.750 x 600 mm Control Siemens 840 D spindle tunring speed 30 - 6.000 U/min tool taper SK 50 number of tool places 26 Pos. Number of working hours ca. 50.884 h connected load 69 KVA weight of the machine ca. 20 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Handwheel, Heidenhain HR 410 - Chip conveyor Fgodpfjzqgh Hjx Akvsf - External belt filtration system Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,474 h, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 356 mm, controller manufacturer: HAAS, table load: 227 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis HAAS Mini Mill 2 was manufactured in 2012. It features an X-axis travel of 508 mm, Y-axis travel of 406 mm, and Z-axis travel of 356 mm. The machine includes a table size of 1,016 × 356 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill 2 vertical machining centre we have for sale. Contact us for further details. • Table: • Size: 1,016 × 356 mm • T-slots: 3 × 16 mm • T-slot spacing: approx. 110 mm • Feed rates: • Max cutting feed: 12.7 m/min • Rapid traverse: 15.2 m/min • Electrical: • Power supply: 360–480 V / 3 Ph / 50–60 Hz Technical Specification Fodpfxjzbh U Ds Akvogf Taper Size BT 40

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 4,100 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,100 mm, workpiece length (max.): 4,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 1,100 mm, table width: 2,100 mm, table height: 1,100 mm, table length: 4,000 mm, overall weight: 40,500 kg, spindle speed (max.): 6,000 rpm, distance table center to spindle nose: 1,100 mm, We offer this as new Kafo KMC-4127 vertical machining center, year of construction 2021. The machine only processed our parts. It did not do any contract manufacturing. If you have any questions or need more information, feel free to send us a message or give us a call. Fgsdozrzggopfx Akvsf

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Huron KX20 vertical machining centre was manufactured in 2002. It features an impressive X-axis travel of 1,200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. With a spindle speed of 18,000 RPM and a tool magazine with 30 positions, this machine is designed for high-speed performance in molds, dies, and aerospace components. If you are looking to get high-quality machining capabilities, consider the Huron KX20 machine we have for sale. Contact us for further details. • Quantity available: 2 units • Purchasing: Special bundle conditions available when buying both units Fgodpfx Akszqczcsvsf • Key highlights: • High-speed performance for molds, dies, and aerospace components with excellent surface finish • Siemens control and HSK40 taper for seamless integration into modern production Technical Specification Taper Size HSK 40

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller manufacturer: FANUC, controller model: 18i-MB5, spindle speed (max.): 12,000 rpm, spindle motor power: 21,000 W, number of axes: 3, This 3-axis STAMA MC 526 vertical machining center was manufactured in 2008. It features a Fanuc 18i-MB5 CNC, twin-spindle with double tool changer, and a high-pressure coolant system. The machine offers a spindle speed of 12,000 rpm, spindle power of 21 kW, and a tool capacity of 60. X/Y/Z travels are 1000/400/360 mm respectively. If you are looking to get high-quality milling capabilities consider the STAMA MC 526 machine we have for sale.Contact us for more information. Fedjx D E Rmspfx Akvegf • Number of tools (ATC): 60 • Twin-spindle with double tool changer: Yes • Rapid feed (X/Y/Z): 45 m/min • Guideways: Roller guideways Additional equipment • CNC rotary table with continuous rotation (4th axis) • High-pressure coolant • Chip conveyor: Belt-type Technical Specification Taper Size HSK 63

Condition: used, Table dimensions: 1,300 x 600 mm Travel range: X-axis 1,100 mm; Y-axis 650 mm; Z-axis 600 mm Feed rate: X-Y-Z axes 7,000 mm/min Rapid traverse: X-Y axes: 15 m/min Rapid traverse: Z-axis 15 m/min Tool holder: SK40 Fgsdpfszrwzmox Akvsf Tool turret: 24 positions Main spindle speed: max. 8,000 rpm Main spindle drive: 9 kW Control system: SIEMENS 810D Powerline Year of manufacture: 2006 Additional features: 4 and 5 axes Machine weight: approx. 7,500 kg

Condition: ready for operation (used), Year of construction: 2015, operating hours: 500 h, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, table load: 2,500 kg, overall weight: 20,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 36, number of axes: 3, This 3-axis Okuma Millac 852 VII was manufactured in 2015. It features a robust table size of 2,200 × 850 mm and a maximum table load of 2,500 kg. The machine is equipped with a high-torque spindle motor of 18.5 kW and a rapid traverse of 20,000 mm/min. If you are looking to get high-quality machining capabilities, consider the Okuma Millac 852 VII vertical machining centre we have for sale. Contact us for further details. • Condition: Excellent; approximately 500 cutting hours; near-new condition • Heavy-duty machining center for high material removal rates • Extremely rigid machine structure • Box guideways on all axes; quadruple box guideway system on Y-axis • Automatic oil lubrication for guideways with machine stop monitoring • Okuma OSP300 control with IGF conversational programming • Parameterized automatic tool collision prevention system • Automatic cutting force, tool load, and spindle torque monitoring • Tool life management and tool usage monitoring • Communication interfaces: USB, PCMCIA, RS-232 • Cutting force: 580 Nm • Chip removal capacity: 540 cm³/min • Spindle speed: 6,000 rpm • Spindle oil cooler • Table size: 2,200 × 850 mm • Rapid traverse: 20,000 mm/min • Tool change time: 0.5 s; chip-to-chip time: 5 s • Machine currently under production; can be inspected under power by an official Okuma technician • Includes documentation: spare parts list, electrical diagrams, programming manual, operation manual • Delivery: Immediate, subject to prior sale Additional equipment • Renishaw tool measuring system • Independent Knoll high-pressure coolant system (70 bar) • 30-micron coolant filtration system • LTA mist extraction system • Rear hinge-type chip conveyor • Large set of BT50 tool holders Fgjdpfx Aozqcr Iskvjf • Transformer Technical Specification Taper Size BT 50

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 420 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, torque: 90 Nm, controller manufacturer: FANUC, controller model: series 31i-B5, rotational speed (max.): 24,000 rpm, tool length: 200 mm, tool diameter: 60 mm, tool weight: 4,000 g, input voltage: 400 V, type of input current: three-phase, number of tool turrets: 1, number of tool stations in tool turret 1: 12, number of driven tool stations in tool turret 1: 12, Equipment: chip conveyor, CNC Machining Center CHIRON FZ12 MT TECHNICAL CHARACTERISTICS: Year of manufacturing: 2013 CNC control: FANUC series 31i-B5 Stroke X axis: 550 [mm] Stroke Y axis: 320 [mm] Stroke Z axis: 420 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] X/Y/Z axis acceleration: 10/12/15 [m/s] Max. bar diameter in turning spindle: 32 [mm] Main spindle max. speed: 8000 [rpm] Max. turning spindle torque: 90 [Nm] Max. counter spindle speed: 6500 [rpm] Counter spindle torque: 14.3 [Nm] Tool changer magazin number of stations: 24 Max. tool lenght: 200 [mm] Max. weight of single tool: 4 [Kg] Max. tool diameter: 60 [mm] Number of tool stations: 12 Number of tool stations driven: 12 Max. speed driven tools: 5000 [rpm] Milling head spindle attachment: HSK-A 50 Stroke B axis: -10 [°] / +100 Max. milling spindle speed: 24000 [rpm] Max. milling spindle power: 36 [kW] Max. milling spindle torque: 29 [Nm] Tool change time: 0.9 [sec] Chip to chip time: 2.4 [sec] Rated current: 125 [A] Total power required: 85 [kVA] Supply voltage: 400 [V] INCLUDED EQUIPMENT: 1 × High Speed Plus package 1 × LNS QUICK LOAD SERVO 80 S2 bar feeder 1 × KNOLL KF 150/500 paper band filtration unit 1 × 40 bar high-pressure coolant system 1 × Oil cooling unit 1 × KNOLL 600 K-1/200 chip conveyor 1 × RENISHAW workpiece probe 1 × RENISHAW TS27R tool setter 1 × ELBARON oil mist extraction unit Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Fjdpfx Aszqbdiskvegf Machine similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas and Alzmetall, as well as CNC milling, drilling and tapping machines, and CNC grinding machines.

Condition: ready for operation (used), Year of construction: 2005, Make: YAMAZAKI MAZAK U.K. LTD Type of machine: VTC-200C Fjdpfezru Rfjx Akvogf Year of manufacture: 2005 Control system: Mazatrol 640 M Machine's weight: 8.260 kg Tool holder: SK 40 x-travel: 1.660 mm y-travel: 510 mm z-travel: 510 mm Speed range: 12.000 U/min Table dimensions: 2.000 × 510 mm Number of tools in the magazine: 24 Plätze

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 68, Equipment: cooling unit, documentation/manual, MIKRON HSM 400 U vertical machining center, equipped with HEIDENHAIN TNC 530, manufactured in 2007. Fsdpfezru Idjx Akvegf Gantry structure. Table equipped with EROWA ITS 148 receiver. Travel: X 400, Y 240, Z 350, B +110°/-110°, C 360°. Feed rate: X, Y, Z 40 m/min. Table load: up to 25 kg. Electromandrel head, 42,000 rpm, 12/13 kW, HSK E40. X, Y, Z linear scales. Chip extractor. Head coolant unit. 68-tool changer. Machine weight: 7,000 kg.

Condition: used, Year of construction: 2007, operating hours: 5,200 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: Fanuc, controller model: 0i MC, total height: 2,600 mm, total length: 2,200 mm, total width: 2,100 mm, table width: 510 mm, table length: 810 mm, table load: 500 kg, overall weight: 5,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11 W, Equipment: chip conveyor, documentation/manual, 24 ATC Cooling through the spindle Manual paletchanger Chipconveyor Fjdpfx Aozrugyokvjgf

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, Work area Travel range X: 1,000 mm Fjdpfx Akszf Hupevogf Travel range Y: 550 mm Travel range Z: 500 mm Clamping area (L x W): 1,100 x 502 Table load: 700 kg Spindle Speed: 12,000 rpm Power: 20.9 kW (25% duty cycle) Torque: 178 Nm (25% duty cycle) Tool holder: BBT 40 (conversion to SK 40 possible) General Tool changer: 30-position (double gripper) Machine bed: High-strength Meehanite casting Rapid traverse rate: 36 / 36 / 30 m/min Equipment Chip management: Chip conveyor incl. chip flushing in the work area Coolant management: Internal coolant supply (IKZ 30 bar) Cooling air: Programmable external cooling Temperature management: Cooling unit for spindle oil Run-in assistance: Electronic handwheel Network connection: Ethernet interface 4th axis: PLC-side preparation Conversion kit to SK 40: Included

Condition: excellent (used), Year of construction: 2020, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: 1172799, spindle speed (min.): 15,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Haas UMC-750 5 Axis Vertical Machining Centre with Haas CNC Control, 630mm x 500mm Table, Travels X Axis 762mm, Y Axis 508mm, Z Axis 508mm, Through spindle coolant, C Axis 360deg Rotation, B Axis -35deg to + 100deg, High speed machining enabled Fsdpfsx Uznfjx Akvsgf Spindle Speed 12,000rpm, 40 Tool ATC 2020 machine , BT40 Spindle Taper, Swarf Conveyor, Coolant System. S/No. 1172799 Wireless probing.

Condition: ready for operation (used), Year of construction: 2001, Available immediately ex-works: Vertical machining center Deckel Maho Type DMC 63 V Year of manufacture 2001 Heidenhain control Table 800 x 500 mm SK 40 24-position tool changer Table load 500 kg Spindle speeds up to 8000 rpm Drive 13/9 kW Chip conveyor Weight 4 tons Fodpfjzrr Risx Akvsgf Price: EUR 6,750.00 plus VAT ex-works

Condition: excellent (used), Year of construction: 2011, operating hours: 2,450 h, travel distance X-axis: 6,000 mm, travel distance Y-axis: 12,001,400 mm, travel distance Z-axis: 18,001,790 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 3,000 kg, total height: 4,700 mm, total length: 12,700 mm, total width: 7,800 mm, rotary table diameter: 2,200 mm, rotational speed (max.): 200 rpm, overall weight: 57,000 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,450 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 460 mm, Equipment: chip conveyor, documentation/manual, CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 6000 Y-axis travel mm: 1200/1400 Z-axis travel mm: 1800 (H) / 1790 (V) C-axis degrees: 360º (0,001) A-axis degrees: ±180° B-axis degrees: ±180° Rapid traverse m/min: 30 Worktable Table dimensions mm: 6000x1235 Milling/turning table nc: Table dimensions mm: Ø2200 Max. workpiece weight kg: 3000 Table rotation speed rpm: 200 max. torque Nm: 4600 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 33/24 (40%ED/cont) Spindle torque Nm: 382/278 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Fsdjzb H Tfepfx Akvsgf Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 With free neighboring places mm: 200 With occupied neighboring places mm: 104 Max. Tool Length mm: 460 Max tool weight kg: 25 Chip-to-chip time s: 9.8 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Workarea light DXF import function Paper band filter Automatic door Indexing Head Set Up for Shaft Machining Axles can be hydraulically locked using the M function Machine running times Under power: 29447 Spindle Working: 2450 Basic machine dimensions / weight Length mm: 12700 Width mm: 7800 Height mm: 4700 Weight kg: 57000

Condition: excellent (used), Working travels 1600 x 900 x 800 mm Table size 1700 x 850 mm Spindle taper SK40 Spindle speeds -10'000 rpm Tool changer 30 Pos. Control: HEIDENHAIN iTNC530 3D Measuring taper Misc.accessories Fodon Hqa Tjpfx Akvjgf MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 1 kg, number of slots in tool magazine: 12, controller manufacturer: Fanuc, controller model: FANUC 21-iM, coolant supply: 1 bar, number of spindles: 1, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rotational speed (max.): 10,000 rpm, workpiece diameter (max.): 63 mm, Equipment: documentation/manual, rotational speed infinitely variable, 4 units of CHIRON FZ08S with 4th axis Peiseler AWU P100 Fjdpsvx Ugwefx Akvogf 1 unit of CHIRON FZ08S 3-axis 3 machines were overhauled by Chiron CMS in 2016, and 4 machines in 2018. Unit price approximately €30,000.

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, torque: 18,500 Nm, controller manufacturer: Heidenhain, controller model: iTnc530, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, coolant supply: 30 bar, distance table center to spindle nose: 680 mm, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 90 mm, tool weight: 6 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Additionally, the machine is equipped with: - Spindle change-over gearbox - Flat guideways - Centralized oil lubrication - Control cabinet cooler - Spindle oil cooler - Grundfos IKZ pump - Oil skimmer - Hand wheel - Renishaw 3D measuring probe - Signal lamp - Tool cabinet - Various tool holders Fjdpfx Ajyh Ri Iekvogf

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: chip conveyor, documentation/manual, For sale is an AWEA BM-1200 CNC-controlled vertical machining center, manufactured in 06/2008. The machine is equipped with a Heidenhain iTNC 530 CNC control system and features an automatic tool changer with 40 tool positions. In addition, the machine is equipped with internal coolant / cooling through the spindle, a high-pressure coolant system, and a chip conveyor. Technical data / equipment: Manufacturer: AWEA Mechatronic Co., Ltd. Model: BM-1200 Serial number: 8015 Date of manufacture: 06/2008 Control system: Heidenhain iTNC 530 15" TFT color display Tool holder: BT40 Spindle speed: 50 – 12,000 rpm Spindle power: 21 / 15 kW Direct drive spindle Travel X-axis: 1,200 mm Travel Y-axis: 600 mm Travel Z-axis: 600 mm Table size: 1,300 x 600 mm Rapid traverse X/Y: 30 m/min Rapid traverse Z: 24 m/min Tool magazine: 40 positions Tool change time: approx. 4 seconds Dual gripper Internal coolant / cooling through the spindle, Type A High-pressure coolant pump 20 bar Additional coolant tank Two switchable filter cartridges Chip conveyor parallel to the X-axis Heidenhain infrared probe system TS 640 Signal light 3-color Red/Yellow/Green Completely enclosed work area with work area lighting Machine documentation available Toolbox Fgjdszp Iz Eopfx Akvof Alignment screws and washers CE specification Weight according to nameplate: approx. 7,500 kg Voltage: 400 V Connected load: 25 kVA Frequency: 50/60 Hz 3 phases Condition: The machine is in used condition but is complete and well-maintained. Inspection and test run possible by arrangement.