Used Deckel Feinbohrkopf for sale (694)

Condition: good (used), Drilling and milling head for lid milling machine Guedpfxsv U A S Ho Afijh

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,797 h, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, swivel angle B-axis (min.): -30 °, swivel angle B-axis (max.): 90 °, TECHNICAL DETAILS Control: MillPlus iT Heidenhain X travel: 880 mm Y travel: 630 mm Z travel: 630 mm B axis: -30° / +90° C axis: available Spindle and Drive Spindle speed: 20 - 12,000 rpm Spindle taper: SK 40 DIN 69871 Torque at 40 % / 100 % duty cycle: 28 / 19 kW Table and Workpiece Table size: 1,250 x 700 mm Table load capacity: 650 kg NC rotary table: Ø 800 mm Tool Magazine Tool change system: 2 × 16 positions MACHINE DETAILS Operating hours: 43,802 h Spindle hours: 17,797 h Total power requirement: 44 kW Machine weight: 9.5 t Space requirements: 3.50 × 3.20 × 2.60 m Gjdpfxexf A E Re Afisuh Coolant system standard volume: 250 liters EQUIPMENT - Renishaw OMP60 probe - Rotoclear - Rinse gun - High-pressure pump - Chip conveyor - Air filtration system - ICS (internal coolant supply)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,510 h, functionality: fully functional, machine/vehicle number: 11670000823, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 180, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Drive: Variable-speed asynchronous motor with liquid cooling Control: Sinumerik 840D powerline Work spindle Tool holder: HSK-A63, hydraulic-mechanical tool clamping Spindle speed: 0 – 10,000 rpm, continuously programmable Feed Drive: AC brake motors on the X, Y, Z, and B axes Feed range on the X, Y, and Z axes: 0 – 60,000 mm/min Rapid traverse on the X, Y, and Z axes: 80 m/min Measuring system Resolution on the X, Y, and Z axes: 0.001 mm Position tolerance on the X, Y, and Z-axis: 0.008 mm Pallet Number: 2 Size: 630 × 630 mm Hole pattern: 108 × bushing Ø 16.02 H6 Centering bushing: Ø 16.02 H6, 38.5 mm deep NC rotary table Max. tabletop rotation: 30 rpm Tabletop holding torque at 40% duty cycle: 5,000 Nm Tabletop holding torque at 100% duty cycle: 3,250 Nm Workpiece weight Per pallet: max. 800 kg Difference with different loads: max. 800 kg Tool magazine Type: Vertical chain magazine HSK-A63 Positions: 180 Tool changing system: Double gripper Max. tool diameter standard: 80 mm Max. tool diameter with free adjacent positions: 160 mm Max. Tool length from spindle nose: 550 mm Max. tool weight: 12 kg Max. magazine load: 630 kg MACHINE DETAILS Space requirement: 6.0 x 6.0 m Height: 3.2 m Weight: 18 t Power requirement: 71 kVA Machine dimensions: approx. 4.7 x 5.6 x 3.2 m Gsdpfx Afsxf Htxjiouh EQUIPMENT - Internal coolant supply - Chip conveyor - Belt filter system - Cooling unit - Rotoclear - Tool breakage detection (laser) - Mist separator - Measuring probe - Handheld control unit - Flushing gun - Blow-air cooling system - 4-color signal lamp - Dynamic package

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,421 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 18000 Tool taper BT40 Number of axis 5 Movement X-Axis Movement 2500 mm Y-Axis Movement 920 mm Z-Axis Movement 820 mm Gujdexfcqyepfx Afioh This 5-axis DECKEL MAHO DMF 250 linear was manufactured in 2006. It features a Heidenhain iTNC530 control, extensive travel capabilities with X2,500mm, Y920mm, Z820mm, and a high-speed spindle at 18,000rpm. The machine includes a BT40 spindle taper, ATC 30 magazine, and full NC rotary capabilities on A, B, and C axes. Consider the opportunity to buy this DECKEL MAHO DMF 250 linear universal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 1988, DECKEL S11 tool grinding machine - good condition - Scope of offer according to photos - EXW CH-4528 Zuchwil Technical data Clamping surface of the tool slide: 500 x 180mm Max. Tool diameter between the tips: 130mm Max. Tool diameter with flying clamping in the universal dividing head: 620mm Max. Tool lengths between centers: 270mm T-slot machine stand: 12mm T-slot grinding head, tool slide and accessories: 8mm Sanding stroke: 190mm Sanding stroke for twist sanding: 190mm Cross adjustment of tool slide: 100mm Vertical adjustment of sanding head: 325mm Longitudinal adjustment of grinding spindle: 5mm Tool carrier: 220mm Grinding head support: 800mm Universal dividing head on tool slide: 330mm Sanding head support: 360 degrees Sanding head: 360 degrees Tool carrier: 360 degrees Three-phase drive motor: 1.1KW at 2800 rpm Spindle speeds: Infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter: 125mm Max. Cutting wheel diameter: 200mm Guedpjr Elwkefx Afioh Weight: approx. 800 kg Dimensions: 800 x 1100 x 1760mm Space requirement: 2.5 x 2.3 m No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: reconditioned (used), Universal tool milling machine Make: harich (DECKEL) Model: B (FP 2) reconditioned with CE geometric acceptance with test report with guarantee Accessories: - 3-axis digital display FAGOR Innova 30i-M - fixed table or universal table - vertical milling head SK 40 - coolant system - operating instructions CE and safety equipment: Godpfx Aedvdczofijuh - new machine electronics with control cabinet - cover cap on the vertical milling head with electrical protection - chuck protection hood with electrical protection - drive motor with braking function - control panel with emergency stop, release, start and stop buttons - new documentation for machine and control cabinet - CE declaration of conformity

Condition: good (used), functionality: fully functional, DECKEL FP1 Active milling machine Manufacturer: Deckel Type: FP1 Active Condition: very good Control type conventional Control active HEIDENHAIN TNC X-path 300 mm Y-path 160 mm Z-path 340 mm Tool holder SK40 Speed 40-2000 rpm. Control Active HEIDENHAIN TNC Total power requirement 2 kW Machine weight approx. 0.73 t Gedpfxoxnniao Afieuh Space requirement approx. TBH 1200x1100x1600 mm

Condition: used, Year of construction: 2012, x-travel 500 mm y-travel 450 mm z-travel 400 mm control SIN840D SL B - axis -5 / +110 x 0,001 ° C-axis 360 x 0,001 ° feed X/Y/Z/-axis 1 - 24.000 mm/min rapid traverse X/Y/Z 24,00 m/min spindle turning speed - stepless 20 - 10.000 U/min power capacity at 40 % load 13,00 KW power capacity at 100 % load 9,00 kW tool taper SK40 toolpiece magazine: chain magazine 30 Stück diameter of tools max. 80 mm tool diameter with 2 vacant positions 130 mm tool length - max. 300 mm weight of tools max. 6,00 kg table surface area 630 x 500 mm Gedpew Tm R Ujfx Afijuh workpiece weight 200 kg total power requirement 17,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 4,50 x 4,00 x H2,90 m 5-axis machining center with SIEMENS Sinumerik 840D SL control, swivel rotary table, tool magazine 30-positions, HEIDENHAIN touch probe, linear scales X/Y/Z, chip conveyor, electronical handwheel, 2nd work-area-door. Machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: Heidenhain Mill Plus, table width: 500 mm, table length: 500 mm, rotary table diameter: 500 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,618 h, coolant supply: 40 bar, spindle nose: SK40 (DIN69871), number of slots in tool magazine: 60, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The 5-axis DMU50 eVolution has been removed from production in working order and can also be seen in operation in our showroom (by appointment). The machine is equipped with 40 bar internal spindle cooling, chip conveyor, 60-tool changer, Renishaw tool setter, Heidenhain 3D probe, 18,000 RPM spindle, Visiport, and original factory extraction system. Gjdpexnixisfx Afisuh

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,339 h, Main Drive Number of axis 3 Gedpfx Afexa H R Tjiouh Media Chip conveyor Yes Internal cooling Yes This 3-axis DMG DECKEL MAHO DMU 60 monoBlock was manufactured in 2005. It features a chip conveyor and a coolant system, ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 60 monoBlock machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2006, TECHNICAL DATA Main drive Speed: Infinitely programmable: 18`000 rpm In set-up mode: 20 - 800 rpm Work spindle: Hollow shank taper: HSK-A63 Tool clamping: Hydraulic Feed drive Gjdou Hkb Rjpfx Afieuh Linear motor: X-axis AC servomotors: C, B, Y, Z Feed speed X, Y, Z: Up to 20`000 mm/min Rapid traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Position measuring system Resolution: C, B, X, Y, Z: 0.001 mm Position tolerance: C, B, X, Y, Z: 0.010 mm Working range X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955 ° C-axis: n x 360 ° Tool changer with double gripper Magazine slots: 120 Max. Tool diameter without free spaces: 80 Max. Tool diameter with free spaces: 130 Max. Tool length from spindle nose: 300 mm Max. Tool weight: 6 kg NC rotary table with swivel axis C-axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance of T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. Torque: 1491 Nm Max. Rotation of the table top: 50 rpm B-axis: Max. Swivel torque: 1864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955 ° Input and display precision: 0.001 ° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6800 kg Installation weight: Approx. 7500 kg Dimensions: 4170 x 3133 x 2560 mm SCOPE OF OFFER U.A: (list not exhaustive): Deckel Maho DMU 50 Evo CNC machining center Heidenhain iTNC 530 Tool breakage control Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 10915551234, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, total height: 2,900 mm, total length: 4,000 mm, total width: 3,000 mm, overall weight: 9,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, mount diameter: 40 mm, TECHNICAL DATA & EQUIPMENT: Operating voltage: 400 V Frequency: 50 Hz Rated current: 100 A Connection: 48 kVA Rapid traverse in B-axis: 40 m/min Rapid traverse in C-axis: 50 m/min Measuring system: Resolution in C, B, X, Y, and Z axes: 0.001 mm Position tolerance in C, B, X, Y, and Z axes: 0.010 (with direct measuring system) Travel range B-axis: 0-161.955° Travel range C-axis: 360° Max. tool diameter without free adjacent positions: 80 mm Max. tool diameter with adjacent free positions: 130 mm Max. tool length from spindle nose: 300 mm Max. tool weight for automatic tool change: 6 kg NC rotary table with swivel axis (C-axis) Clamping surface (rotary axis): 500 x 380 mm T-slot pitch: 63 mm/14h7 Centering bore: 30 mm diameter h6 Max. torque rotary axis: 1491 Nm Max. table plate speed: 50 rpm B-axis: Max. swiveling torque: 1864 Nm Swiveling speed: 40 rpm Swivel range: 0-161.955° Load capacity: approx. 420 kg Max. load positioned in table center: 200 kg Including zero-point clamping system by SCHUNK and clamping rail Gedpfxjxninqo Afijuh Rail length: 490 mm Jaw width: 90 mm Including chip conveyor, extraction filter by SARA PICK-UP INFORMATION: Pick-up must be scheduled firmly between December 10th and 12th FCA Winterlingen, loaded onto truck

Condition: used, x-travel 800 mm y-travel 600 mm z-travel 550 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope Gjdpfx Aoxndb Sjfisuh of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2004, x-travel 600 mm y-travel 700 mm z-travel 600 mm Control HEIDENHAIN TNC 530 Tool taper SK- 40 Tools changer 120 fach number of spindle speeds 12.000 U/min/rpm Machine on 32.224 Spindle hours 10.850 h weight of the machine ca. 9,5 t dimensions of the machine ca. 5,45 X 3,53 X 2,63 m Guedpfew Rrcqjx Afish

Condition: excellent (used), Year of construction: 2005, CNC machining center DECKEL MAHO DMF 220 Year: 2005 Control: Siemens 840 D Technical data: Guodsxm Umpepfx Afish Travel (axes): X: 2200 mm Y: 560 mm Z: 720 mm Speed range: 20–12,000 rpm Table size: 2600 x 600 mm 30 tool magazine positions SK 40

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,265 h, General Data Measurements width 2530 mm Measurements depth 2050 mm Measurements height 2650 mm Machine weight 5500 kg Control Unit Brand Siemens Model Sinumerik 810D Powerline Main Drive Spindle speed range 10000 rpm Number of axis 3 Movement X-Axis Movement 635 mm X-Axis Rapid Traverse 25–30 m/min Y-Axis Movement 510 mm Y-Axis Rapid Traverse 25–30 m/min Z-Axis Movement 460 mm Z-Axis Rapid Traverse 25–30 m/min Table Table load 600 kg Tools Max tool diameter 80 mm Max tool length 300 mm Type of tool holder SK40 This 3-axis DMG DECKEL MAHO DMC 635V eco was manufactured in 2011. It features a Siemens Sinumerik 810D Powerline control system, a tool holder SK 40, and a tool magazine with 20 positions. The machine offers a spindle speed of up to 10,000 rpm and a rapid traverse speed of 25 to 30 m/min in X/Y/Z axes. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V eco vertical machining centre. Contact us for more information about this machine. Gjdoxnr Hiopfx Afisuh Application Types Milling

Year of construction: 1996, condition: good (used), A used machining center of the company DECKEL MAHO equipped with: - MillPlus CNC control - Rigid angular table - coolant system - lighting system - tool changer 25-fold - documentation traverse X/ Y/ Z 800/ 650/ 550mm Gsdpfxjhzt Thj Afisuh spindle speed 20- 6300rpm tool holder SK 40 Further tech. Data: see pdf. document Tech. Data and dimensions: Errors excepted.

Condition: good (used), functionality: fully functional, machine/vehicle number: 71.708181, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, controller manufacturer: SIEMENS, total height: 2,200 mm, total length: 3,000 mm, total width: 2,000 mm, table width: 500 mm, table length: 700 mm, table load: 200 kg, overall weight: 2,500 kg, spindle speed (max.): 9,000 rpm, number of slots in tool magazine: 16, mount diameter: 40 mm, TECHNICAL DATA & EQUIPMENT: Operating voltage: 400 V Frequency: 50 Hz Rated current: 35 A Connection: 17 kVA Position measuring system X, Y and Z-axis: 0.001 mm Position tolerance X, Y and Z-axis: 0.010 mm with direct measuring system Max. tool length from spindle nose: 290 mm Max. tool weight for automatic tool change: 6 kg Max. total tool weight in magazine: 50 kg Rotary table with swivel axis Guedpfx Asxm Uacofieh Rotation range: 360° Table plate clamping: mechanical Swivel range: +95/-10° COLLECTION INFORMATION: Collection must take place, without exception, between December 10 and 12. FCA Winterlingen, loaded onto truck

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 650 mm z-travel 550 mm Control Mill Plus auto power on hours ca. 45.000 h turning speed range - main spindle 30.000 min/-1 tool taper HSK 50 E In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale! Gjdpfx Afjvdufdjijuh

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,729 h, General Data Measurements width 2530 mm Measurements depth 2050 mm Measurements height 2650 mm Machine weight 5500 kg Main Drive Spindle speed range 10000 Number of axis 3 Movement X-Axis Movement 635 mm X-Axis Rapid Traverse 25–30 m/min Y-Axis Movement 510 mm Y-Axis Rapid Traverse 25–30 m/min Z-Axis Movement 460 mm Z-Axis Rapid Traverse 25–30 m/min Table Table load 600 kg Tools Max tool diameter 80 mm Number of station 20 Max tool length 300 mm Type of tool holder SK40 This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It's a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine. Gjdpfx Afsxnd I Sjieuh Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 11035534144, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, spindle speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! Payment is due one week after purchase of the machine! Bidding is binding and requires timely collection between 17.11.2025 and 21.11.2025! TECHNICAL DETAILS Travel path X-axis: 500 mm Travel path Y-axis: 400 mm Travel path Z-axis: 400 mm Rapid traverse X-axis: 12 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Feed rate in X, Y, and Z axes: 10,000 mm/min Spindle speed (max.): 9,000 rpm Tool holder: SK 40 Max. tool length from spindle face: 290 mm Max. tool weight for automatic tool change: 6 kg Gedpfx Afoxm T I Esieuh Max. total tool weight in magazine: 50 kg Clamping area: 700 x 500 mm Swivel range: 360° Tilting range: +95/-10° Permissible table load: 200 kg MACHINE DETAILS Control model: SIEMENS SINUMERIK 810 D Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,300 mm Total weight: 5,000 kg EQUIPMENT 16-position tool changer Rotary table with swivel axis Mechanical table clamping

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 2881-0191, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS DIALOG 112, spindle speed (max.): 8,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment term is one week after purchase of the machine! Placing a bid obligates punctual collection between 17/11/2025 and 21/11/2025! TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 550 mm Travel Z-axis: 500 mm Feed rate X, Y, Z: 1 – 10,000 mm/min Rapid traverse X, Y: 30 m/min Rapid traverse Z: 20 m/min Setup mode feed rate X, Y, Z: 1 – 2,000 mm/min Table width: 550 mm Table length: 900 mm Table load capacity: 800 kg Maximum setup height: 600 mm Distance spindle nose to table: 150 – 650 mm Maximum spindle speed: 8,000 rpm Number of tool magazine slots: 40 Mounting diameter: 40 mm Tool holder: SK 40 Max. tool diameter, standard tools: 80 mm Max. tool diameter, special tools with free adjacent slots: 140 mm Max. tool diameter, boring bars with free adjacent slots: 200 mm Max. tool length from spindle nose: 300 mm Max. tool weight: 12 kg Control model: SIEMENS DIALOG 112 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,300 x 2,900 mm Total weight: 8,000 kg EQUIPMENT Documentation/manual Gusdpsxm Ty Isfx Afish Chip conveyor

Condition: ready for operation (used), operating hours: 28,461 h, functionality: fully functional, machine/vehicle number: 28850008692, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS SINUMERIK 810 D, table load: 500 kg, No minimum price – guaranteed sale to the highest bidder! The payment deadline is one week after purchase of the machine! Placing a bid obligates you to collect the machine on time between 17/11/2025 and 21/11/2025! TECHNICAL DETAILS Travel X-axis: 630 mm Travel Y-axis: 500 mm Travel Z-axis: 500 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Feed rate X-axis: 0–30,000 mm/min Feed rate Y-axis: 0–30,000 mm/min Feed rate Z-axis: 0–30,000 mm/min Tool holder: SK 40 Number of tool positions: 24 Table width: 500 mm Table length: 800 mm Max. table load: 500 kg Loading height: 850 mm MACHINE DETAILS Gusdpfoxm Tu Esx Afioh Control model: SIEMENS SINUMERIK 810 D Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,400 x 2,400 mm Total weight: 8,000 kg Operating hours: 28,461 h

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: R0101, travel distance X-axis: 800 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 2,000 rpm, table length: 1,000 mm, table width: 520 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bidding obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Travel distances X-axis travel: 800 mm Y-axis travel: 300 mm Z-axis travel: 300 mm Gujdpfx Aexm Scuefioh Spindle Maximum spindle speed: 2,000 rpm Minimum spindle speed: 25 rpm Chuck diameter: 40 mm Work table Table width: 520 mm Table length: 1,000 mm MACHINE DETAILS Dimensions (L x W x H): 2,500 x 2,000 x 1,800 mm EQUIPMENT Collets Additional milling table (table dimensions: 700 x 240 mm) Large machine vice (jaw width: 200 mm)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 278, workpiece weight (max.): 50 kg, grinding wheel diameter: 150 mm, grinding length: 340 mm, rotational speed (max.): 8,000 rpm, workpiece diameter (max.): 250 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bids are binding and require collection within the period 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Godpfx Afjxm Rnvsiouh Max. grinding wheel diameter: 150 mm Speed range: 1,000 – 8,000 rpm Workpiece spindle taper: SK 50 Max. workpiece weight: 50 kg Max. diameter: approx. 250 mm With tailstock: max. 125 mm Max. length: approx. 500 mm With tailstock: max. 250 mm Max. grinding length: 340 mm X-axis grinding stroke: 340 mm Y-axis traverse: 240 mm Z-axis traverse: 240 mm A-axis speed: 120 rpm A-axis swivel range: 360° C-axis speed: 20 rpm C-axis swivel range: 197° MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,000 x 2,400 mm Total weight: 2,500 kg EQUIPMENT Coolant filtration system Oil mist extraction Documentation