Used Vertical Panels for sale (17,336)

Condition: as good as new (ex-display), Year of construction: 2023, The scope of delivery includes: 01x chipboard/ floor covering for storage platforms, new Manufacturer: UNILIN Division Panels Year of construction: March 2023 (new) Dimensions: approx. 2,600 x 1,020 mm (WxD) Chipboard thickness: approx. 38 mm Design: P4, grooved all round Weight / unit: approx. 65.50 kg Panel size: approx. 2.65 m² Color top side: raw Ksdpfxsrc Di Ej Affsnf Color underside: white Remark: - The chipboard panels are as good as new. Due to the storage, dust deposits may be present. - The chipboards do not have a spring. These are picked separately. General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: ready for operation (used), Year of construction: 2011, Feeler QMP-23A 5 Axis Vertical Machining Centre Model: QMP-23A Fanuc Series Oi-MD Control Remote Electronic Handwheels 5 Axis Trunnion Table Travels: X: 580mm (48m/min) Y: 420mm (48m/min) Z: 510mm (48m/min) Spindle Nose to Table Surface: 80 – 590mm Spindle Centre to Column Surface: 510mm Table Surface to Floor 820mm Knsdpsxxbzwefx Affsf Table Centre to Column Surface: 245 – 665mm GANRO TR-150S (TRS Range) Y Axis Tilting Rotary Table 150mm Capacity YOM: 2015 *For sale with Jet Machinery Ltd* Stock No: 79001 Serial No: VKC064 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE VSI Vertical shaft impact crushers are used to obtain fine sand and fine gravel from the hardest with a high degree of abrasive materials such as basalt, granite, gabbro, riverstone etc. This type of crushers acting as tertiary crushers in facilities with it’s high cubic ratio and fine product. These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and time, and to increase their crushing performance with their low investment costs. General Specifitions and Features: - Fine product, low wear cost, cubic shape, application flexibility and maintainability. - Rotor and crushing chute with stress relieved welding - Inner surfaces of the crusher is coated with wear resistant lining plates - Hydraulic opening cap -Automatic Lubrication system • Model: FABO VSI-900 • Type: Vertical Shaft Impact Crusher Closed rotor • Capacity: 100-300 tph • Max Feeding: 45 mm • Rotor Size: Ø 900 mm • Speed: 50-70 m/s Knsdpfxjxryafj Affjf • Motor: Heavy duty GAMAK, 2 X 160-200 kW Bearings: Heavy duty SKF-FAG • Weight: 14000 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions Kedpfx Aexpqm Rsffjnf 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

Condition: new, Year of construction: 2025, table width: 450 mm, table length: 900 mm, table load: 500 kg, spindle speed (min.): 8,000 rpm, number of spindles: 1, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Kjdsxc I Dgspfx Affenf Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm

Condition: used, Vertical insulated tank 100m³ Diameter 3.85m Height 11.25m The tank is insulated with mineral wool It is lined with trapezoidal sheet metal It has space for a side agitator Knsdpfx Aexl Th Neffof The tanks are dismantled, ready for loading.

Condition: new, functionality: fully functional, power: 400 kW (543.85 HP), fuel type: electric, color: dark red, overall weight: 38,000 kg, axle configuration: 2 axles, brakes: other, Year of construction: 2025, Mobile vertical shaft crusher is a specially designed mobile stone crushing screening plant on a portable double axle chassis, consisting of feeder bunker, VSI 900 Vertical shaft impact crusher, vibrating screen and conveyor belts. It can be fed directly with the material in stream areas or it can produce sand and gravel from the sieve material in the crushing plants. Knjdownp Akopfx Affef The GNR - MVSI 900 Vertical Shaft Crusher that gives this facility its name; - Maximum feeding size 50-55 mm - Rotor size 900 mm - Engine power 2x200 kW - The capacity 80-210 tons per hour. For more information please call us.

Year of construction: 1997, condition: repair required (used), Mortising machines Maka Db-6 v Second hand 1977 Make: Maka Model: Kjdpfx Afjfd Rxqjfsnf Db-6 v Description: VERTICAL MORTISER MAKA DB-6 V Year of construction: 1977 Machine condition: very good afer repairs capital Offertype: used machine offer Location: Poland Technical data: AFTER REPARIRS VERY IMPORTENT VERTICAL Year: 1977

Condition: new, functionality: fully functional, color: yellow, overall weight: 19,000 kg, Year of construction: 2025, These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and times, and to increase their crushing performance with their low investment costs. Kedpfsxckf Hox Affjnf VSI-1000 technical specifications: Model: VSI-1000 OR Capacity: 150-400 T/H Rotor Size: Ø 1000mm Maximum Feeding: 100mm Motor Power: 2 x 200-250 kW Speed: 50 – 70 ms Weight: 19000 kg General Specifications and Features: – Fine product, low wear cost, cubic shape, application flexibility and maintainability. – Rotor and crushing chute with stress relieved welding – Inner surfaces of the crusher is coated with wear resistant lining plates – Hydraulic opening cap – Automatic lubrication system

Condition: used, functionality: fully functional, A homogenizer is the machine that enables the size reduction of globules and fat particles of food products. In other words, it reduces variations in two heterogeneous substances, makes them uniformly consistent and reduces separation after mixing. As a result, we obtain particles of micrometer and nanometer size. This size will always depend on the characteristics of the product in question and the results we seek to achieve. Kjdpownx H Ejfx Affsnf Homogenizers stabilize fat emulsions and disperse solids in aqueous solutions. In this way, we avoid that with the difference in density, some parts of the mixture remain on the surface and others precipitate to the bottom.

Condition: like new (used), 30m3 insulated stainless steel tank Dim. 3.40x 6.80. Ksdpfx Afehr Rp Ssfjnf 12 cm insulation, insulated with wool and metal sheet lower bottom insulated with polyurethane foam. We offer transport with our own semi-trailer.

Condition: good (used), Vertical steel tank 60,000l diameter 2.82 m total height 11 m a hatch at the top of the upper floor and at the bottom on the side of the cylinder. Each tank can be painted with epoxy resin coat, or sold sandblasted (no coat). 12 units available Kodpfx Aetwwv Noffonf

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total height: 28,000 mm, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, Excellent condition vertical conveyor, 2800 cm height, year 2019, with documentation and manuals, lightly used. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Kjdpfxjxu Iuvj Affjnf

Condition: ready for operation (used), Year of construction: 2015, The StyleShoots Vertical is a product photography rig with built-in lighting, tablet-based control, and a Canon EOS 5D Mark III. Length: 4100mm, width: 2050mm, height: 4100mm, very little documentation available, an inspection is possible. Kodpsqpgg Tofx Affonf

Condition: excellent (used), Year of construction: 2001, Type: Horizontal / Vertical Serial number: 61937 / 61938 Year of construction: 2001 Diameter: 250 mm Pitch: 190 mm Infeed height: 1000 mm Outfeed height: 2150 mm Power: 3 x 400V, 50Hz, 15kW Dimensions: 3800 x 1200 x 3200 mm Screw conveyor with turnable outfeed shute Kedpfxjttzfcs Affsnf

Condition: ready for operation (used), Year of construction: 2005, operating hours: 11,148 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, table length: 2,500 mm, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 2,000 mm Y-axis travel: 620 mm Z-axis travel: 520 mm Number of axes: 3 Table length: 2,500 mm Table width: 600 mm Tool holder: SK40 Main spindle power: 20 kW Max. spindle speed: 12,000 rpm Tool magazine: 30 MACHINE DETAILS Dimensions (L x W x H): 5,000 x 2,500 x 3,000 mm Net weight: 10,500 kg Power: 20 kW Operating hours: 11,148 h EQUIPMENT - Tool magazine - Chip conveyor - External cooling Knsdpfx Asx Hzn Aeffsf - without machine vices.

Year of construction: 2017, condition: ready for operation (used), Additional Equipment Mold temperature control Automatic activation lamp Automatic last rotating Automatic mold slider closing Measurement & quality control tools This Kloeckner Desma PU D522/12-LDI was manufactured in 2017. Designed for PU injection and shoe production, featuring a 12-station setup with a clamping force of 70 kN. It includes a reaction injection molding unit, automatic mold slider, and motor capacity of 23.16 kW. Heating capacity stands at 45.50 kW. Contact us for more information about this machine. Knodex D Scvjpfx Affef Application Types Injection Moulding

Condition: good (used), Year of construction: 2001, Machine is in good condition. Machine vice not come. Tool holders will come withouth cutting tools. Knjdpfx Afsx Nddfsfjf

Condition: excellent (used), Year of construction: 2020, Willemin Macodel 408MT Machine never in production! Mfd. 2020 505 Hours SN: 538 Schema: 408 MT-538 Premium Upgrades Included: High-Speed Spindle Package 42,000 RPM Motor Spindle (upgraded from standard 30,000 RPM) Air/oil lubrication system for maximum speed capability 10 kW / 13 hp power HSK-E40 interface Control: Fanuc 31i-B5 with advanced software package Total Axes: 7 (X, Y, Z, A, B, U, W) Work Envelope: 250mm x 200mm x 300mm (X/Y/Z) Positioning Accuracy: 0.0001mm resolution via Heidenhain scales Tool Capacity: 48 tools HSK-E40 with dual-disc magazine Willemin-Macodel 408MT 7-Axis Mill/Turn Center Premium Swiss Precision Configuration with Extensive Upgrades Advanced Machining Systems Automatic Back-Working Device (U-axis) with hydraulic vice Bar Feed System for 500mm / 20" bar stock Collet Chuck System (F35) for bar work up to 27mm diameter Angular positioning W-axis (± 0.02°) for turning tools Thermal & Environmental Controls DTS Dynamic Thermal Stabilization for machine base DTS Spindle Thermal Management Elbaron Oil Vapor Extraction System with dual filtration Complete thermal compensation package Measurement & Monitoring Renishaw TS-27R Touch Probe for tool measurement Renishaw OMP 400 Spindle Probe for in-process measurement Renishaw AXISET HD-TB for rotary axis calibration Broken Tool Detection System (0.2mm minimum diameter) Advanced CNC Features High-Speed Machining Package (HPCC with 1,000 block look-ahead) Timer Start Function for automated warm-up Integrated Data Server with Ethernet and 1GB flash storage Extended Program Memory (3,900 KB) TCPC/TRC for advanced tool compensation Medical device manufacturing Aerospace components High-precision contract manufacturing Complex parts requiring minimal setups Knjdpfx Afox H Tl Tofef Configuration Highlights: Complete 7-axis simultaneous capability Mill/turn operations up to 6,000 RPM Bar feeding with automatic back-working Ultra-high speed finishing (42,000 RPM) Comprehensive thermal management Full probing and tool monitoring Network-ready with data server

Condition: new, total length: 2,500 mm, total width: 625 mm, total height: 22 mm, We offer OSB boards as grade II (second choice) in this listing. (Sales are package-only. Single boards cannot be purchased.) Scope of delivery: - OSB boards, grade II - Total length: 2,500 mm - Total width: 625 mm - Thickness: 22 mm - Board size in m²: approx. 1.56 m² - Total m² per package: approx. 50 m² - Version: Tongue and groove - Quantity per package: 32 pieces - Base price per m²: €9.24 Note: This is a special lot of grade II boards, which may contain damaged OSB panels. Your contacts at our company: Mr. Falk Deutsch Mr. Mario Klöver Ksdpoxxrv Eefx Affonf Mr. Andre Evering General information about the item: This item is only offered for collection. If transport or shipping is required, additional costs will apply, which can be requested individually based on the delivery location and quantity.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 409081, saw blade diameter: 300 mm, cutting length (max.): 8,000 mm, cutting height (max.): 3,000 mm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting height (vertical): 3,000 mm Max. cutting width: 8,000 mm Max. saw blade diameter: 300 mm MACHINE DETAILS Voltage: 400 V Power consumption: 8 A Fuse: 16 A Power output: 3.0 kW Knsdpfx Afjx Hg Uhsfsf EQUIPMENT CE marking Horizontal cutting Vertical cutting

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 12020 kg Control Unit Brand MAZATROL Movement X-Axis Movement 203.2 mm Y-Axis Movement 70.10 mm Z-Axis Movement 71.8 mm Additional Equipment Tool Taper: CAT#40 / Automatic Tool Changer (ATC): 48 tools This 3-axis Mazak VCN 700E/40-II vertical machining center was manufactured in 2013. Ideal for precision engineering, it offers robust construction and reliable performance. Consider the opportunity to buy this Mazak VCN 700E/40-II vertical machining center. Contact us for more information. Application Types Milling Knedpfox H U Amsx Affof

Condition: new, total length: 2,440 mm, total width: 590 mm, total height: 18 mm, We offer OSB boards here as Grade II (seconds). (The boards are only sold by the package. Individual boards cannot be purchased.) Scope of delivery: - OSB boards, Grade II - Total length: 2,440 mm - Total width: 590 mm - Thickness: 18 mm - Board size in m²: approx. 1.44 m² - Total m² per package: approx. 144 m² - Design: Tongue and groove - Quantity per package: 100 pieces - Base price per m²: €7.56 Notes: This is a special lot in Grade II, damage to the OSB boards may be present. Your contacts at our company: Mr. Falk Deutsch Knedsxxrn Ujpfx Affof Mr. Mario Klöver Mr. Andre Evering General information on the item: This item is only available for collection. Delivery or shipping is subject to additional costs, which can be provided upon request depending on the location and volume of delivery.

Condition: new, total length: 2,440 mm, total width: 590 mm, total height: 12 mm, We offer you OSB boards as Grade II selection. (The boards are only sold in packages. Individual boards cannot be purchased.) Scope of delivery includes: - OSB boards, Grade II - Article number: OSB10 - Total length: 2,440 mm - Total width: 590 mm - Thickness: 12 mm - Board size in m²: approx. 1.44 m² - Total m² per package: approx. 216 m² - Design: with tongue and groove - Quantity per package: 150 pieces - Base price per m²: €5.04 Kjdpfx Aoxxrhnjffsnf Note: This is a special lot of Grade II boards; the OSB boards may show damages. Your contacts in our company: Mr. Falk Deutsch Mr. Mario Klöver Mr. Andre Evering General information about this item: This item is available for collection only. If transport or shipping of this item is required, it will incur additional costs, which can be requested from us individually depending on the place of delivery and the required quantity.

Condition: good (used), The scope of delivery includes: 6x steel panels, used Manufacturer: SSI Schäfer Total depth: approx. 960 mm Inner depth: approx. 955 mm for stud depth: 950 mm Total width: approx. 300 mm Material thickness: approx. 2.50 mm Knedpfxjv R T Eps Affef Material color: Sendzimir galvanized Frame profile: approx. 300 x 40 x 20 mm Weight per piece: approx. 7.940 kg Your contact persons: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.