Vertical machining center

MIKRON VCE 1600

Condition: ready for operation (used), Year of construction: 2015, operating hours: 10,615 h, functionality: fully functional, machine/vehicle number: 108.007.00.0065, travel distance X-axis: 1,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 800 mm, table load: 2,000 kg, spindle speed (max.): 10,000 rpm, The payment deadline for the machine is November 20, 2025! Placing a bid obligates you to collect the machine on time, between December 1, 2025 and December 5, 2025! Transport dimensions of the machine body (L x W x H): 4,500 x 2,900 x 3,200 mm TECHNICAL DETAILS Work Areas Travel X-axis: 1,600 mm Travel Y-axis: 900 mm Travel Z-axis: 800 mm Feed Drive Feed rate X-axis: 14 m/min Feed rate Y-axis: 14 m/min Feed rate Z-axis: 12 m/min Rapid traverse X-axis: 24 m/min Rapid traverse Y-axis: 24 m/min Rapid traverse Z-axis: 20 m/min Work Table Table dimensions: 1,700 x 850 mm Maximum table load: 2,000 kg Number of T-slots: 7 T-slot spacing: 100 mm Distance spindle nose–work table: min. 100 mm / max. 900 mm Spindle speed: max. 10,000 rpm Tool holder: ISO 40 Number of magazine slots: 30 Max. tool diameter without adjacent free spaces: 85 mm Max. tool diameter with adjacent free spaces: 150 mm Max. tool length: 305 mm Max. tool weight: 6 kg MACHINE DETAILS Control: HEIDENHAIN TNC 620 Dimensions & Weight Dimensions (L x W x H): 4,600 x 3,900 x 3,300 mm Weight: 16,000 kg Transport dimensions of the machine body (L x W x H): 4,500 x 2,900 x 3,200 mm However, the height can be reduced to 2,900 mm. Coolant system Capacity: 540 l Operating Hours Spindle hours: 10,615 h Isdpfexnkqajx Ah Nsal Power-on hours: 30,204 h EQUIPMENT 3D probe Technical documentation

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1000rpm spindle, Spindle bore 275mm, 10 station turret 45kW spindle motor, Iedpfx Ahowwtrbe Noal FANUC Series 32i control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: like new (used), Year of construction: 2012, operating hours: 2,500 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 24 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 16 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 18,600 kg, spindle speed (max.): 10,000 rpm, spindle nose: ISO B40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, Machine in good condition and maintained by the manufacturer. Iaedpfx Ahevxk Tgs Nol Available quickly. Equipped with Renishaw, Option: 4th Axis. Digital integration and 4th axis cabling. A second machine is available. Possibility of delivery and installation by us.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Milling Machining Center - Vertical / Brand: DECKEL MAHO / Type: DMC 63V / Year of construction: 1999 The machine can be inspected by appointment under power. Well-maintained and very good functional condition. Spindle replacement: 18.03.2022 Spindle hours (03/13/2025): 51.206 h The machine has a Lehmann A-axis and counter bearing (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed/axis drives: - Advancing force X, Y, Z (100 % ED): 6.000 N - Feed rate: 0 - 30.000 mm/min - Rapid feed X, Y, Z: 30 m/min - Diameter ball screw/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z-axis to VDI/DGQ 3441: 0,015/0,010 mm (indirect/direct measuring system) Distance measuring system: - Input unit: 0,001 mm Working spindle: - Drive power (40/100 % ED): 13/9 kW - Torque (40/100 % ED): 83/57 Nm - Speed range: 1 - 10.000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12.000 N Tool magazine: - Tool changing system: Pick-up - Number of magazine positions: 24 - max. Tool-Ø with vacant neighboring spaces: 80/140 mm - max. Tool length: 300 mm - max. Tool weight: 7 kg - Chip-to-chip time: 6,5 sec - Rotational speed/tool magazine: 47 rpm - max. Maximum loading weight of the tool magazine (24 x 3 kg): 72 kg Machine/Working table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (set-up weight): 500 kg - Loading height: 850 mm - max. Workpiece height (at max. tool length): 240 mm EQUIPMENT: - CNC-Control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) Iaodov Nxbyopfx Ah Nol - Direct measuring system - Internal cooling through the spindle, 15 bar - Coolant system (emulsion) - Electronic hand wheel - Chip conveyor - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 400 mm z-travel 400 mm control MSX 501 Mori Seiki table surface area 700 x 450 mm max. table load 350 kg number of T-slots 4 T-slot - width 18 mm T-slot - distance 100 mm Number of revolutions 12.000 U/min power capacity - main spindel 18,5 / 15 / 11 kW tool taper BT 40 max. Torque 110,5 Nm diameter of forward milling spindle bearing 70 rapid travel x/y/z 20.000 mm/min feed speeds 1 - 20.000 mm/min Tipp feed 15 Steps / 0 - 1.260 mm/min Number of Toolpositions in magazine 40 Pos. Max. mould width 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm Isdpfx Ahsv Az Uco Noal max. tool weight 8 kg change-time chip to chip 2,8 sec change-time tool to tool 1,0 sec total power requirement 34 kVA weight of the machine ca. 7,2 t dimensions of the machine ca. 2,8 x 3,0 x 2,9 m Machining Center Vertical MORI SEIKI - NV 4000 DCG - ca. 14.000 Operating-Hours

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 610 mm, nominal power (apparent): 37 kVA, torque: 236 Nm, controller manufacturer: Heidenhain iTNC530, controller model: iTNC530, table width: 700 mm, table length: 1,700 mm, table load: 700 kg, rotational speed (max.): 12,000 rpm, overall weight: 9,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 16,580 h, spindle motor power: 37 W, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, Heidenhain iTNC530 3-axis CNC machining center Stroke x 1500 mm Stroke Y 700 mm Stroke Z 610 mm Table dimensions: 1700x700mm SK40 tool holder Magazine 48 tools Rapid feed 36m/min Table load: 700 kg Spindle center coolant 20 bar Iasdpfxjvz Tyus Ah Nsl Chip conveyor Crank

Condition: new, Year of construction: 2024, functionality: fully functional, Drive spindle Speed: 3,000 rpm Power: 11 kW Torque: 320 Nm Chuck diameter: 260 mm Spindle bore: 65 mm Spindle nose: A2-6" Working area Iaodpfx Ahoup Slbs Nel Center distance: 1,500 mm Center height: 290 mm Diameter over bed: 570 mm Diameter over slide: 510 mm Tool system Turret: PARAT 4-station turret head RD 3 Tailstock Technology: Manual Center: MK-4 (flying) Equipment Chip management: Chip tray Coolant supply: Coolant pump 7 bar

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1091950, SPECIFICATION Travel X axis stroke 1626mm Y axis stroke 813mm Z axis stroke 762mm Spindle nose to table (max) 889mm Spindle nose to table (min) 127mm Table Length 1626mm Width 711mm T Slot width 16mm T Slot centre distance 125mm Number of Std T slots 5 Max. Weight on table 1814kg Spindle Maximum rating 22.4kW Maximum speed 7500rpm Maximum torque 610Nm at 500rpm Drive system 2 speed geared head Taper BT50 Bearing lubrication Air/Oil injection Cooling Liquid cooled Feedrate Rapids on X 13.7m/min Rapids Y 15.2m/min Rapids on Z 15.2m/min Max. Cutting feedrate 12.7m/min Axis Motor Max. thrust X 24910N Max. thrust Y 24910N Max. thrust Z 24910N Toolchanger Capacity 30 Maximum tool diameter (adjacent empty) 254mm Maximum tool diameter (full) 102mm Maximum tool length (from gage line 406mm Maximum tool weight 13.6kg Tool to tool (avg) 4.2 sec Chip-to-chip (avg) 6.3 sec General Air required 113l/min, 6.9 bar Weight 10,206Kg MACHINE EQUIPPED WITH:- Ijdpfx Aot Dmmvjh Noal Through spindle coolant Swarf auger Rigid tapping Hard drive Lighting Enclosed Guarding

Condition: good (used), Year of construction: 1992, Automatic band saw JAESPA Type:W400 AZ Control Minipos 807 year 1992 Iajdpfxsgf H Sao Ah Nsl Cutting diameter round material max. 400mm Sägebandlänge:5500X32X1,1mm Feed automatic cut length min.20mm Chip conveyor Total power requirement 4 Kw Weight approx.2500kg Accessories 2X saw blades, roller table 6m motor drive, machine documentation available. Footprint : 2,8X2,8X2m

Condition: excellent (used), Year of construction: 2001, center height: 525 mm, workpiece weight (max.): 5,000 kg, grinding length: 4,000 mm, grinding wheel diameter: 1,060 mm, The machine underwent a retrofit in 2024. Control: Siemens Sinumerik 840D. Iasdpfxew Ngm Us Ah Nol