Condition: good (used), Year of construction: 2004, travel distance Z-axis: 1,800 mm, controller manufacturer: Siemens, Max. turning length: 2000 mm Max. turning diameter: 600 mm Max. turning diameter over bed: 370 mm CNC type: Siemens 810D X axis: 310 mm Z axis: 2000 mm Number of tools in turret: 8 Spindle speed: 1800 rpm ----- Length x width x height: 1950.0 × 4500.0 × 1620.0 mm Weight: 4540 kg Status: available for inspection Iedpfeyvf Drex Ahvjtd Technical specification: Chevalier FCL-2480

Condition: refurbished (used), Year of construction: 2005, operating hours: 14,923 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 305 mm, feed length X-axis: 762 mm, feed length Y-axis: 406 mm, feed length Z-axis: 305 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 - Serial number: 41246 - Manufacturing date: 04/05 - Spindle speed: 6000 rpm - X-axis travel: 762 mm - Y-axis travel: 406 mm - Z-axis travel: 305 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 507 mm - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 - Voltage: 366/425 V - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system - Spindle assembly - Spindle motor - Encoder - Vector drive - Servo amplifiers - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system Isdpfx Asyanlaohvjtd - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Condition: used, Year of construction: 2006, x-travel 1.100 mm y-travel 600 mm z-travel 560 mm Control Heidenhain iTNC 530 spindle tunring speed 12.000 U/min tool taper SK 40 number of tool places 40 Pos. weight of the machine ca. 7,4 t Ijdpfx Asytybyjhvstd In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - 4th axis preparation - Internal coolant supply Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, MIKRON HSM 800 ProdMod is a Vertical machining center engineered for precision, high accuracy and reliability. Working capacities: table 900×600 mm, max table load 800 kg; travels X800 × Y600 × Z500 mm. Main specs: spindle motor 12.5/22 kW, total power 26 kW, 3x 400 V 50 Hz, noise 75 dB(A), machine weight ≈8300 kg, dimensions L4000×W3700×H2500 mm. Equipment: 50‑position tool magazine (tool Ø max 75 mm, length 210 mm, max tool weight 2.5 kg). Delivers tight tolerances; typical applications: automotive, aerospace, medical, machine tools and watchmaking. Itjdpfx Ahoytu Hksvod

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,000 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, table load: 700 kg, overall weight: 12,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of axes: 4, This 4-axis WEMAS VZ 1000 vertical machining center was manufactured in 2007. It features an X-axis travel of 1000 mm, Y-axis travel of 610 mm, and Z-axis travel of 660 mm. The machine includes a robust table size of 1300 x 600 mm and a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 1000 machine we have for sale. Contact us for further details. • Axes: 3 linear axes (X/Y/Z); 4th axis available via rotary table — see Additional equipment • Electrical data: 35 kVA, 400 V, 3 + PE • Table size: 1300 × 600 mm • Tool changer: Swing-arm ATC, 20 tools Additional equipment Itodpeyttutjfx Ahvjd • 4th-axis rotary table (mounted on the table) • Through-spindle coolant (CTS) • Tool measurement probe: Renishaw TS27R • Chip conveyor Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 950 mm, controller manufacturer: FANUC, controller model: Series 31i, table width: 1,050 mm, table length: 4,100 mm, overall weight: 22,500 kg, spindle speed (max.): 3,500 rpm, number of slots in tool magazine: 24, number of axes: 3, This EUMACH FBE-4000 Vertical Machining center was manufactured in the year 2013 in Taiwan. It is equipped with a Fanuc Series 31i control unit and has 3 axis. The machine has a spindle speed of 3500 rpm. Machine Benefits Qualitative Machine Benefits • Very good condition! Itsdoyttffspfx Ahvjd Technical Machine Benefits • Spindle motor power 22/26kw

Condition: excellent (used), Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, controller model: FANUC 21iMB, overall weight: 7,500 kg, spindle speed (max.): 12,000 rpm, spindle nose: BT-40, number of slots in tool magazine: 30, Equipment: documentation/manual, rotational speed infinitely variable, The used VICTOR A110 vertical machining center is a small/medium-sized 3-axis continuous CNC machining center; table size 1350×600 mm, X travel 1,100 mm, Y 600 mm, Z 560 mm, year of manufacture 2011 (installed in 2013), CE-compliant, equipped with FANUC 21i-MB CNC with Manual Guide i, rapid feed of 42 m/min, axis acceleration of 0.75G, working feed of 12 m/min, weight 7,400 kg. It is equipped with a BT-40 milling spindle, 12,000 rpm, 15 kW, cooled by dedicated chiller, belt-type chip conveyor, double internal auger, tank washing system, high-pressure through-spindle coolant, 32-position random tool changer, door, memory card slot, Ethernet RJ 45 port, and RS 232 serial port. Only just over 13,000 power-on hours and 7,000 spindle hours (original). PERFECT WORKING CONDITION! Iodpfx Ahsx Hap Ejvotd

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, number of slots in tool magazine: 20, controller manufacturer: Heidenhain, total height: 2,665 mm, total length: 3,250 mm, total width: 2,779 mm, overall weight: 4,100 kg, table length: 1,200 mm, table width: 560 mm, controller model: Heidenhain TNC 620, torque: 83 Nm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 17 kVA, number of spindles: 1, rapid traverse Z-axis: 25 m/min, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, spindle speed (max.): 9,000 rpm, spindle speed (min.): 20 rpm, table load: 720 kg, tool diameter: 80 mm, tool length: 300 mm, tool weight: 6,000 g, Equipment: documentation/manual, rotational speed infinitely variable, Used DMC 1035 V eco for sale – High-performance vertical machining center Upgrade your manufacturing processes with this robust and powerful DMC 1035 V eco from DMG MORI! This vertical machining center is ideal for a wide range of milling tasks and offers outstanding performance when machining a wide variety of materials. Key Features: High rigidity and stability: Ensures precise machining results and a long service life. Large work area: Provides sufficient space for machining large workpieces. High spindle speed: Enables fast and efficient machining processes. Robust construction: Guarantees a long service life and reliable performance. CNC control: Equipped with a user-friendly CNC control for easy programming and operation. Additional Information: Year of Manufacture: 2010 Condition: Good, Used Control: Heidenhain TNC 620 Travel Range: 1,035 x 560 x 510 mm Speeds: 20 - 9,000 rpm Ideal for: General Machining Tool and Mold Making Single-Part and Small-Batch Production Mechanical Engineering Why this DMC 1035 V eco? Ijdpfx Aeytryzehvetd This machine has been regularly serviced and is in good used condition. It offers a cost-effective way to expand your manufacturing capacity and increase your productivity.

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 750 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: HAAS, total height: 2,700 mm, total width: 2,400 mm, table load: 700 kg, overall weight: 5,000 kg, spindle speed (max.): 7,500 rpm, product length (max.): 2,400 mm, number of axes: 4, This 4-axis HAAS VCE 750 was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 400 mm, and Z-axis travel of 500 mm. The machine includes a table size of approximately 900 x 350 mm and a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VCE 750 vertical machining centre we have for sale. Contact us for further details. Isdpfx Ajytqvhjhvotd • Table size: approx. 900 × 350 mm • Tool magazine: 20 positions (carousel) • Included options: 4th axis; through-spindle cooling Technical Specification Taper Size ISO 40

Condition: used, 1 unit 5-axis universal machining center MIKRON HBM 1350 with chip conveyor BÜRENER KFE 63/40-900 Z60, spindle and guideways worn in, self-dismantling required. Color: as shown, according to pictures and inspection. Condition: used. Storage location: production hall. Payment method: advance payment by bank transfer. Shipping: collection only from location in Regensburg. Isdsytqaaspfx Ahvotd

Condition: good (used), Year of construction: 1999, functionality: fully functional, Yang Eagle SMV 1000 Year of manufacture: 1999 Control system: Iedjytp Rwepfx Ahvstd - Fanuc OM Main spindle: - max. 6000 rpm Tool changer: - 20 magazine stations Travel paths: - X-1020, Y-510, Z-510 mm Table: - Clamping surface 1070 x 500 mm Availability: - Immediately or by arrangement

Condition: excellent (used), Year of construction: 2010, Syntak MBV 10 including 4th axis rotary table Year of manufacture: 2010 Iodpfeytp Naox Ahvetd Control system: - Fanuc Oi-MD Main spindle: - max. 10,000 rpm Travel distances: - X-1040, Y-600, Z-620 mm Tool changer: - 30 magazine positions Table design: - Clamping surface 1200 x 600 mm Coolant system: - Belt filter system - Chip conveyor Availability: - Immediate or by arrangement

Condition: good (used), Year of construction: 2004, operating hours: 6,679 h, functionality: fully functional, machine/vehicle number: H-30459, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, total height: 2,800 mm, total length: 3,200 mm, total width: 2,200 mm, table width: 510 mm, table length: 1,020 mm, table load: 1,000 kg, overall weight: 4,700 kg, spindle speed (max.): 10,000 rpm, Equipment: documentation/manual, HURCO VMX 30 Vertical Machining Center Isdpfx Asytny Djhvjtd - Spindle nose to clamping table: 152 – 762 mm - Table T-slots (DIN 650): 5 - For further technical data, see photos - With technical documentation - Important note: The machine vices visible on the work table are not included in the scope of supply! - A tool holder package is included in the delivery. Attention: The item must be collected bindingly between 27.04. and 30.04.2026 on a date to be agreed. FCA D-39126 Magdeburg – loaded onto truck

Condition: used, TECHNICAL DETAILS Ijdpjyu U E Ajfx Ahvjtd - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 20 [kW] - Spindle speeds : 24000 [rpm] - Number of spindle hours : 4877 [h] LINEAR AXES - Travels on X/Y/Z axes : 700/420/380 [mm] - Rapid traverses rates (X/Y/Z) : 60 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 25 - Tool exchange time : 0.9 [sec] TABLE - Table dimensions : 840/420 [mm] - Maximum weight upon table : 400 [kg] - Distance table / spindle nose (min./max.) : 200-580 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 16 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1650/2950 [mm] - Machine height : 2550 [mm] - Machine weight : 3400 [kg] MACHINE HOURS - Number of hours under power : 18761 [h] - Number of working hours : 7667 [h] EQUIPMENT - CNC : Siemens 840D SL - Interface : Ethernet / RS232 / USB / PCMCIA - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump * with paper filtering unit - Coolant through spindle - Chips conveyor - Tool probe - Workpiece probe - Electric transformer

Condition: ready for operation (used), The machine is ready for operation. Please refer to the video: The machine can be dismantled, loaded, and transported to your location for an additional charge. Basic Specifications Iedpfxoyu Tlze Ahvotd Travel paths: X 710 / Y 520 / Z 520 mm Weight: approx. 5,500 kg Tool holder: SK40 or HSK-E50 Tool magazine: 24 positions (optionally 60) Spindle Standard: 12,000 rpm Option: 30,000 rpm Power: 10–15 kW (standard) / 15–20 kW (option) Axes & Feed Rapid traverse: 30 m/min Feed rate: up to 10,000 mm/min Resolution: 0.001 mm Positioning accuracy: 0.010 mm Tool Data Max. tool length: 315 mm (SK) Max. tool weight: 6 kg Magazine total weight: 80 kg (optionally 180 kg) If you have further questions, please feel free to send a message here, or contact us via WhatsApp or phone. The price is net, no warranty or returns, liability for defects is excluded, subject to prior sale and errors.

Condition: used, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, overall weight: 6,500 kg, Fanuc 21IM BT40 spindle maximum speed 10,000 rpm 24-position tool changer Isdpfoyu Tkqsx Ahvotd

Condition: used, Vertical Machining Center Machine type: DMG DMC 635 V Control: Sinumerik 840 D Year of manufacture: 2008 TECHNICAL DATA: Travel: X-axis: 635 mm Y-axis: 510 mm Z-axis: 460 mm Rapid traverse (X/Y/Z): 30 m/min Iedeyu S T Depfx Ahvstd Spindle speed range: 20 – 10,000 rpm Spindle motor: 9 / 13 kW Tool holder: SK 40 Tool changer Tool pockets: 20 Table size: 790 x 560 mm Machine weight: 4,000 kg Features: No chip conveyor – chip tray Electronic handwheel Glass scales

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,000 mm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 20,000 m/min, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, table width: 3,000 mm, table length: 2,000 mm, table load: 12,000 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, spindle nose: BT50, number of spindles: 32, Equipment: chip conveyor, documentation/manual, Vertical machining center Gantry Double column WELE LB-321 Year: 2020 C.N.C: HEIDENHAIN ITNC 530 Specifications Rigid tapping and helical interpolation, Gear-driven spindle head, High-pressure system: 20 bar, Column extension: 200 mm, Full enclosure, optical scales on X, Y, Z axes, Belt-type chip conveyor, Air through the spindle. 90° orthogonal head for 5-face machining, Automatic tool change in vertical position, Horizontal speed: 2400 rpm, Automatic indexing every 5°, With high-pressure coolant through the head, 3D software Table dimensions: 3000x2000 mm T-slot/pitch size: 28x200x10 mm Max weight allowed: 12000 kg Capacity Longitudinal X-travel: 3060 mm Cross Y-travel: 2150 mm Vertical Z-travel: 800 mm Spindle nose: BT50 ISO Spindle speed: 10-6000 rpm. Motor power: 22-26 Kw Rapid X,Y,Z axis: 24000/24000/20000 mm/min Isdeyu S Dispfx Ahvetd Tool Stations: 32 no. Specific properties Distance between table surface and spindle nose: 400 – 1200 mm Distance between columns: 2300 mm Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Machine dimensions: 8365 × 4550 × 4350 mm Machine weight: 33,000 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 4,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 12,000 m/min, rapid traverse Z-axis: 12,000 m/min, controller manufacturer: FANUC, controller model: 0IMD, table width: 4,200 mm, table length: 1,650 mm, table load: 9,000 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 4,500 rpm, spindle nose: BT50, number of spindles: 1, number of slots in tool magazine: 32, Vertical machining center gantry type. KENT BKV20-42 Year of manufacture 2015 CNC FANUC 0iMD Table Table dimensions: 4200x1650 mm T-slot/pitch size: 22x9x170 mm Max weight allowed: 9000 kg Capacity Longitudinal X-travel: 4200 mm Cross Y-travel: 2000 mm Iedpfxjyu Svfe Ahvjtd Vertical Z-travel: 900 mm Spindle nose: BT50 ISO Spindle speed: 30-4500 rpm. Motor power: 18.5-22 Kw Rapids X,Y,Z axis: 10000/12000/12000 mm/min Tool magazine 32 Specific properties Distance between colums: 2000 mm Distance from spindle nose to table: 40-940 +200 mm Increased heigth: 200 mm Machine dimension: 10.443x4330x4518 mm Machine weigth: 42.500 kg

Condition: excellent (used), Year of construction: 2008, Johnford SV-41 (2008) – Technical Specifications Type: Vertical CNC Machining Center Control Unit: Fanuc CNC Control Year: 2008 Travels (X / Y / Z): approx. 1,020 / 510 / 610 mm Table Size: approx. 1,100 x 500 mm Max Table Load: approx. 600–800 kg Spindle Taper: BT40 Spindle Speed: up to 8,000 rpm Spindle Motor: approx. 11–15 kW Tool Magazine: 24 ATC (Automatic Tool Changer) Rapid Traverse: approx. 24–30 m/min Coolant System: Yes Isdpfx Ahsyu R N Rovotd Chip Conveyor Machine is equipped with Fanuc control and is in good working condition.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 10,000 m/min, controller manufacturer: Heidenhain, controller model: ITNC530, table width: 3,000 mm, table length: 1,500 mm, table load: 10,000 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, spindle nose: bt50, number of spindles: 1, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, Vertical machining center double column WELE SB-316 Year: 2016 C.N.C: HEIDENHAIN ITNC530 Iodpfx Ahjyu R Hvovstd Rigid tapping and helical interpolation, Gear-driven spindle head, High-pressure system: 20 bar, Full enclosure, Optical scales on X, Y, Z axes, Belt-type chip conveyor. Table dimensions: 3000x1500 mm T-slot/pitch size: 22x170x9 mm Max weight allowed: 10000 kg CAPACITY Longitudinal X-travel: 3060 mm Cross Y-travel: 1600 mm Vertical Z-travel: 800 mm SPINDLE Spindle nose: BT50 ISO Spindle speed: 10-6000 rpm. Motor power: 22-26 Kw Rapid X,Y,Z axis: 24000/24000/10000 mm/min Tool Stations: 32 no. SPECIFIC PROPERTIES Distance between table surface and spindle nose: 200 – 1000 mm Distance between columns: 1700 mm Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Machine dimensions: 8310 × 3790 × 4350 mm Machine weight: 27,000 kg

Condition: used, Year of construction: 2003, machine/vehicle number: 2885002273, functionality: fully functional, operating hours: 18,782 h, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 480 mm, Deckel Maho DMC 63V milling machine for sale. The machine was manufactured in 2003. Heidenhain iTNC 530 control system. Magazine for 24 SK40 tool holders. Isdpfx Aev R U Ulshvetd 10,000 rpm belt-driven spindle, significantly cheaper to maintain than an electric spindle. Tool measuring probe. Material measuring probe readout system installed. Port for connecting to a computer network for file transfer. The machine was imported from a tool shop in Germany. It was used here for manufacturing individual components. The machine has a new spindle with a one-year warranty. Adjustable gripper clamping force. The Heidenhain control power supply has been replaced with a new one. The monitor starts up without delay. After import, the X-axis guides, roller, and X-axis belt were replaced. The coolant pump was replaced with a new one two years ago. Y-axis cover wipers were replaced as well. The tool turret does not get stuck. We are selling a machine ready for immediate production; we need space for a 5-axis milling machine.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, controller manufacturer: Heidenhain, For sale: Used DMC 635 – Powerful Vertical Machining Center Upgrade your production processes with this robust and high-performance DMC 635 from DMG MORI! This vertical machining center is ideal for a wide range of milling applications, offering excellent performance when machining various materials. Itodpfx Ahoytfzlsvsd Key Features: • High rigidity and stability: Ensures precise machining results and long service life. • Large working area: Provides ample space for processing large workpieces. • High spindle speed: Enables fast and efficient machining operations. • Sturdy construction: Guarantees longevity and reliable performance. • CNC control: Equipped with a user-friendly CNC controller for easy programming and operation. Additional Information: • Year of manufacture: 2006 • Condition: good, used • Control: Heidenhain iTNC530 • Travel paths: 635 x 460 x 510 mm • Spindle speeds: 20 – 10,000 rpm Ideal for: • General machining • Tool and mold making • Single-part and small-batch production • Mechanical engineering Why choose this DMC 635? This machine has been regularly serviced and is in good used condition. It offers a cost-effective way to expand your machining capabilities and increase your productivity.

Condition: repair required (used), Year of construction: 2014, functionality: limited functionality, Initial commissioning: 2014 Control: Fidia C40 Vision Working Areas X-axis approx. 850 mm Y-axis approx. 950 mm Z-axis approx. 600 mm Rotary Swivel Table RT A-axis ±125° C-axis 360° continuous Clamping Table Diameter: 800 mm T-slots: 4+1 (H7)x18mm T-slot spacing: 160 mm Max. table load: 1,200 kg Max. turning diameter: 1,000 mm Milling Head Spindle power: 30 kW Max. spindle speed: 24,000 rpm Torque: 105 Nm Tool interface: HSK 63A Tool clamping: hydraulic Linear Axis Drives Ijdeytfy Iepfx Ahvjtd Feed rate X, Y, Z axes: approx. 45 m/min Dimensions, Weights Machine footprint without control cabinet: approx. 4,000 x 4,700 mm Required height: approx. 3,700 mm Total weight: approx. 17,000 kg Additional Equipment - 42-position tool changer - Wet machining with belt filter system - Chip conveyor Machine Condition The table has been completely overhauled, but there are still issues with the Fidia control system. An additional investment of around €25,000 is required for new Fidia control cards.

Condition: used, Year of construction: 2010, Technical details: x-travel: 800 mm y-travel: 685 mm Itedpfsytcf Usx Ahvsd z-travel: 630 mm c-axis: 360° (Planscheibe-Tisch) control: Siemens 840D Power Line spindle speed:: 10.500 - 20.000 U/min max. torque on the spindle: 180 Nm tool taper: HSK -A63 DIN 69893 tool changer with: 40 places no. of tables: 2 table swivelabel +/-: je 120 (a-Achse) ° table surface area: 280 x 275 mm table load capacity: 320 kg interface: RS232 spindle hours: 38.700 h Total power requirement: 37 kW dimension machine xH: 4,0 x 4,4 x 3,0 m dimensions LxWxH: Späneförderer: 2,1 x 1,05 x 1,5 m dimensions L x W x H: Kühlschmieranlage: 1,3 x 1.6 x 1,95 m 5 - axis machining center CNC machining center Clamping table for 4th and 5th axis (swivel 120° right/left/speed 50 rpm and turn with faceplate Ø 280mm/200 rpm) max. workpiece size 940 x 650mm for/on table with chip conveyor make Knoll, 750 K-1/150; year of manufacture 2009 Bürener coolant system with paper belt filter belt width 700mm; year of manufacture 2009 for both control cabinets with cooler Rittal Accessories exclusive i.D. *