DMG MORI CMX 1100 V

DMG MORI CMX 1100 V

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620 (3D), spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis DMG MORI CMX 1100 V was manufactured in 2017. It features impressive axis travels of 1100 mm in X, 560 mm in Y, and 510 mm in Z. The machine is equipped with a 30-position tool magazine and a HEIDENHAIN TNC 620 control system. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 1100 V vertical machining centre we have for sale. Contact us for further details. • Operating hours: Dedpeylkl Tefx Aayeuw • Spindle hours after replacement: 2,900 h • Spindle hours (machine counter): 32,420 h • Power-on hours (counter): 60,300 h • Condition: Powered on and running in production; inspection possible (operation, geometry, overall condition) • Worktable size: 1400 × 560 mm • Axis dynamics: Rapid traverse 30 m/min (linear axes) • Spindle: • Tool clamping: DIN 69872 • Tool magazine: 30-position chain-type magazine with double gripper • Cooling/media: Coolant–air switching via M-function (external), chip tray • CNC control: HEIDENHAIN TNC 620 (3D) with ASCII keyboard and 15" monitor • Measuring systems: Direct measuring systems (linear scales) on X/Y/Z; air purge for measuring system • Additional machine options: • Safe voltage package: X and Y axis motors with brake, overvoltage limiter, undervoltage monitoring with emergency stop trigger • Software options – HEIDENHAIN: • Option 3 (#21): M120 tool radius compensation for contouring, LOOK AHEAD up to 99 blocks, 3D machining, M118 handwheel positioning during program execution Additional equipment • Scraper-type chip conveyor (left side) • Coolant tank, 250 l • Manual wash gun for machining area • 4-color signal tower • HEIDENHAIN probing package: Wireless workpiece measuring probe and probe calibration ring • Manual handwheel (portable control panel) Additional information • A brand-new original DMG spindle was installed by DMG Service in November 2024 • The service report includes both the spindle measurements and the machine geometry measurements taken after the replacement Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111254, MACHINE SPECIFICATION Table size 660mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102-610mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 20 tools Approximate weight 3220Kg MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control Swarf auger Filtermist extraction system 10 off assorted BT40 toolholders Duodjyrrx Uepfx Aayjw Programmable coolant nozzle Automatic lubrication system Lighting Enclosed guarding

Condition: good (used), Year of construction: 2016, operating hours: 6,400 h, DMG MORI EcoMill 1100V CNC Milling Machine In well-maintained condition, DMG MORI Ecoline milling machine. Year of manufacture: 2016. Technical data: Spindle speed: 20–12,000 rpm, continuously adjustable 14 kW main motor Spindle mounting: SK40 Travel ranges: X: 1100 mm, rapid traverse: 36 m/min Y: 560 mm, rapid traverse: 36 m/min Z: 510 mm, rapid traverse: 30 m/min Table dimensions: 1400 × 560 mm Maximum table load: 1000 kg Control system: Siemens SLIMline 3D Multi Touch 19" Weight: approx. 5830 kg Dodpfx Aajy Ulb Njyjuw External dimensions: 4898 × 2770 × 2935 mm Equipped with: IKZ (internal cooling through the spindle) Large tool magazine and tool changer with 30 positions Renishaw Power Probe 3D probing system Chip conveyor Documentation and maintenance history Tool cart with various holders and Renishaw OMP40-2.

Condition: ready for operation (used), Year of construction: 2018, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1100 mm Y-AXIS TRAVEL: 560 mm Z-AXIS TRAVEL: 510 mm DISTANCE SPINDLE NOSE-TABLE: 120-630 mm RAPID FEEDS X-Y-Z: 30 m/min SPINDLE: 20 - 12000 rpm; 9 - 13 kW; ISO 40 - DIN TABLE SIZE: 1400 x 560 mm MAX ADMITTED LOAD: 1000 Kg HIGH PRESSURE COOLANT: 12 Bar TOOL MAGAZINE: CHAIN-TYPE ; 30 POS CONTROL UNIT: HEIDENHAIN TNC 620 WEIGHT: 5830 Kg OVERALL DIMENSIONS: 4028 x 2750 x 2950 mm Dodpfxowh Dg Ro Aayjuw ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL NOTE: WITH No 30 TOOLS-HOLDERS ISO 40

Condition: ready for operation (used), Year of construction: 2016, number of axes: 3, This 3-axis DMG MORI CMX 600 V was manufactured in 2016, featuring a 4th axis rotary table preparation, Siemens 840D control, and SK40 spindle. It includes advanced probing systems for both workpiece and tools, ensuring precision. Ideal for those looking to enhance their machining capabilities with reliable equipment. Contact us for more information about this machine. • Basic machine with main‑drive options • Preparation for rotary table (4th axis), EA 510L (rotary table itself not included) • Safety measuring system for X/Y/Z axes • Signal lamp, 4‑colour standard • PROGRESSLine & Planolight • Signs language: Hungarian • Screen text: German/Hungarian • Documentation: Doc 1 & Doc 2 (HU); Electrical circuit diagram (DE) Dujdpfx Aaex D Di Uoyew • Misc.: Preparation for machine handover; internal rebuild unit ID 34; inspection & preparation noted Additional equipment • Chip conveyor with ICS (internal coolant) + chip tank (Production Package 1) • Workpiece probing system TS 649 (on table) • Tool probing system TT140 • Lamp inside tool magazine • Tool loading through magazine door • Platform/foil machine base • NetService remote service (ID 2632226)

Condition: used, Year of construction: 2017, operating hours: 60,300 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, feed length X-axis: 1,100 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, table width: 560 mm, table length: 1,400 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 5,830 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 32,000 h, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, DMG MORI CMX 1100 V / 2017 / HEIDENHAIN TNC 620 / spindle replaced by DMG For sale: a used DMG MORI CMX 1100 V vertical machining center, manufactured in 2017. The machine is located at our facility in Bydgoszcz, Poland. The planned production run on this machine has just been completed, and the machine is ready for sale. The machine is still connected to power, so it is possible to start it up, inspect it, and view it on-site after arranging an appointment in advance. The main spindle was replaced by DMG service in November 2024. Since the replacement, the spindle has operated for approximately 3,700 hours. A DMG service report confirming the spindle replacement is available. Key specifications: Manufacturer: DMG MORI Model: CMX 1100 V Year of manufacture: 2017 Control: HEIDENHAIN TNC 620 3D Travel in X/Y/Z: 1100 / 560 / 510 mm Table: 1400 × 560 mm Spindle speed: 20–12,000 rpm Spindle taper: SK40 DIN 69871 Tool magazine: 30 positions Linear scales in X/Y/Z axes Wireless HEIDENHAIN measuring probe Chip conveyor Electronic handwheel Coolant tank: 250 l Machine weight: approx. 5830 kg Operating hours: Approximately 3,700 hours since spindle replacement Spindle hours according to the counter: approx. 33,000 hours Machine on-time hours: approx. 61,800 hours Duodpfxoy I A Duo Aayow Current meter readings are available in the documentation dated May 12, 2026.

Year of construction: 2019, condition: ready for operation (used), Travel X/Y/Z: 1100mm/560mm/510mm, rapid traverse X/Y/Z: 36m/36m/30m/min, table-spindle distance: 120mm-630mm, table dimensions X/Y: 1400mm/560mm, max. table load: 1000kg. Speed: 12000rpm, spindle power: 15kW, spindle mount: CAT40, tool positions: 30, machine dimensions X/Y/Z: approx. 3200mm/2750mm/2950mm, weight: approx. 5500kg, operating hours: 2049h, spindle hours: 716h, control: DMG Mori SLIMline with Siemens 840D SL. Including chip conveyor, oil mist separator preparation, direct path measuring systems X/Y/Z, measuring probe kit for Siemens control. Documentation available. On-site inspection is possible. Duedjuk I Eyepfx Aayow

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, We offer you: CNC bed milling machine Manufacturer: DMG MORI Type: CMX 70 U Year of manufacture: 2022 Control system: Celos with Siemens 840D sl Operate Technical data: Travel distances: X-axis: 750 mm Y-axis: 600 mm Z-axis: 520 mm B-axis: -10 to +95° C-axis: 360° Main spindle: Tool interface: SK 40 Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (40/100%): 20 / 14.5 kW Torque - main spindle (40/100%): 121 / 84 Nm Work table: Table size: D 800 x 620 mm Tool changer: Number of tool positions: 30 Max. tool diameter: 80 / 130 mm Max. tool length: 300 mm Max. tool weight: 8 kg Max. magazine load: 120 kg Feed rates: Rapid traverse (x/y/z): 30 m/min Operating hours: approx. 5,300 h Spindle hours: approx. 3,010 h Technical features & accessories: - Direct linear measuring system in x, y, and z, incl. air purging - Compressed air switching via M function - Chip disposal package, includes: - Chip conveyor, tank 300 l - Spray gun - Signal light, 4-color - Tropical package, includes: - Active control cabinet cooling - Additional cooler on the control panel - Hydraulic oil temperature sensor - Cooling unit 3.3 kW for the main drive - Preparation for oil mist separator - Measuring probe kit, manufacturer Heidenhain, includes: - TS460 workpiece measuring probe Dusdpjzcy I Sofx Aayjw - Measuring cycles - Tool length/diameter kit, manufacturer Heidenhain, includes: - TT160 for tool measurement - Measuring cycles, incl. tool breakage monitoring - Automation package, includes: - Loading and unloading via automatic magazine door - Automatic closing of the tool magazine - Cabin roof - Electronic handwheel - ATC (Application Tuning Cycle) - Preparation for 3D quickSET Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 6500 kg Control Unit Brand FANUC Main Drive Number of axis 3 Movement X-Axis Movement 1020 mm Y-Axis Movement 540 mm Z-Axis Movement 510 mm Additional Equipment Through-spindle cooling Djdpfx Aasx D Igdoyjuw Preparation for 4th axis External cooling unit This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a robust table size of 1200 × 540 mm and axis travels of 1020 × 540 × 510 mm. Equipped with through-spindle cooling and preparation for a 4th axis, it offers enhanced machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500 vertical machining centre. Contact us for more information. Application Types Milling

Condition: excellent (used), Boring bar Bar diameter: 180 mm Overall length: 2500 mm Weight: 920 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Dujdpfx Aajum Uzgsysw DE - 44143 Dortmund - Wambel