Boring machine for sale
Your location was not identified (Edit)
2014
ready for operation (used)
Manufacturer Fermat Czech republic
Regular service, machine is running, under power
Continuously controlled horizontal boring machine
T - bed arrangement, 4 linear axes + rotary table
Extensible working spindle
Ysxr2k
Control system: Heidenhain iTNC530
Spindle taper: ISO50
Working spindle diameter: 130mm
Spindle speed: 10 - 3000 rpm
Travel: X-axis: 4000mm, Y-axis: 2500mm, Z-axis: 1500mm
Spindle extension W: 730mm
Table size: 1 800 x 2600mm
Maximum workpiece weight: 15t
Tool change: KUKA robot, 1... more
ready for operation (used)
Additional information Draw Bars - 75mm x 9250mm, 75mm x 4750mm (can be joined to make 14000mm), 95mm x 5950mm , 50mm x 5260mm. Various Boring Sleeve sets -
Boring depth 32' / 9753mm from chuck
Workpiece diameter up to 18" / 457mm
Spindle speeds 11.5 - 350 rpm
Hollow spindle 15" / 381mm
Centre height 21" / 533mm
Feed rate 0.5 - 10" per min / 13mm - 254mm
Chuck 30" / 762mm
Nnjh7
Input 400/3/50 75 kW
Equipment 4 x 3 point steadies, 2 x boring bar steadies, 4 x boring bars, 2 x sealing units,
Feat... more
Spindle quill: Ø 130mm optional Ø 150 mm
Spindle speed: 3.500 rpm optional 4.000 rpm
Main drive power S1: 40 / 46 kW
Spindle torque S1: 1.650 / 2.050 Nm
Hydrostatic machining table: 1.600 x 1.600 / 1.600 x 2.000 / 2.000 x 2.000 / 2.000 x 2.500
Table load, max.: 20.000 kg
X axis: 2.000 / 3.000 / 4.000 / 5.000 mm
Glwhb3t
Y-axis: 2.000 / 2.500 / 3.000mm
Z axis: 1.500 / 2.000 / 2.500 / 3.000 mm
W-axis (Spindle quill): 800 mm
Control: SIEMENS Sinumerik 840D sl / HEIDENHAI... more
1984
ready for operation (used)
The single-column turning-boring lathe model 1512 is a universal machine designed for processing a variety of products from ferrous and non-ferrous metals in conditions of small-scale and serial production.
Model 1512 is the most widespread among boring lathes in the territory of the former USSR. The machine allows turning parts up to 1250 mm in diameter, up to 1 meter in height and up to 3200 kg in weight. The machine has been exported to many countries around the world.
The following operatio... more
2006
good condition (used)
Table surface 1000 x 280 mm; x- approx 500 mm; y- approx 240 mm; z- approx 500 mm;
feeds and rapid traverse on X and Y; n vertical head= 90-2000 1/min; ISO 40 holder; quill travel 120 mm; motor 400 Volt; 2,2 KW; weight= approx. 1150 kg.
Upper beam horizontally adjustable and rotatable; vertical head swivels, 2 sides
G7bfuc3nu
Chip protection and safety cover, halogen lamp, central lubrication; chip tray;
Combination milling cutter holders; Drill chuck holders; Cutter head with holder; Clamping
G... more
Diameter of working spindle : 200 mm
Travel X-axis : 4000 mm
Travel Y-axis : 3150 mm
Spindle speed : 0 - 1120 /min.
Gvvff0
Spindle travel - W axis : 1600 mm
Ram travel (V) : 3150 mm
Spindle taper : ISO 50
Travel Z-axis : mm
Clamping area of rotary table : 2000x2000 mm
Max. load of table : 20000 kg
The machine is in good condition, possible to test it.
Rotary table E20.
2 pcs of floor plates 1870 x 6400 mm.
Milling heads.
Contact me for price and more information. more
2015
ready for operation (used)
Type: MCU 1100 VT-5X Power Plus
Manufacturer: KOVOSVIT MAS in 2015, warranty 6 months
Heidenhain TNC 640
X-axis travel: 1100 mm
Y-axis travel: 1550 mm
Z-axis travel: 1000 mm
Table clamping surface: diam. 1000 mm
Table load: 1700 kg
Rotary axis C: 360
Tilting axis A: +45 -130
Itzixylmw
Travel range in X, Y, Z axes: 1- 50 000 mm.min-1
Rapid traverse in X, Y, Z axes: 50 000 mm.min-1
Continuously variable spindle speed range: 20 - 10,000 rpm
Spindle taper: ISO 50
Dimensions of the machine ground pl... more
ready for operation (used)
Serial No. 6675
Table size 1800mm x 1500mm
Table Longitudinal traverse (Y) 1500mm
Cross traverse 2400mm
Swivels 360 degrees
Head stock vertical traverse 1350mm
Tpyhica9
Input 420/3/50 ac 30 hp
Spindle & facing speeds 1.2-250 rpm
Spindle speeds 1.2-1000 rpm
Feed rate 1.5-3820mm per minute
Facing head diameter 900mm
Facing head slide cross traverse 320mm
Spindle traverse 750mm
Spindle diameter 125mm
Bores 50 int
Table load 12,000 kgs
Fitted with Outrigger supports, pendant control and power drawba... more
Diameter of working spindle : 160 mm
Travel X-axis : 7000 mm
Travel Y-axis : 2500 mm
Spindle speed : 1 - 1600 /min.
Spindle travel - W axis : 1250 mm
Spindle taper : M100
Main motor power : 75 kW
Machine weight : 46000 kg
The machine is in good condition, still under power.
Bex0rndozx
Including 4 floor plates 1870 x 5580 mm.
Rich accessories: milling heads and rotary table E20.
Contact me for price and more information. more
2020
as good as new (ex-display)
21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations.
Vzbvw2n7 more
Year of construction: Apporoximately 2000-2003.
Nuo9zx7r
Number of spindles: 23.
Motor: 2 kw. 400W, 50 hz.
With pnuematic clamps. more
CATALOG NUMBER M0261
TECHNICAL DATA
number of spindles 21
distance between the first and last drill 640mm
the distance between centers of individual spindles 32mm
max. workpiece size 50 x 915 x 3000mm
max. drilling depth 65mm
number of pneumatic clamps 2
height of the working table of the 860mm drill
max. height of the clamps over the table 70mm
working pressure 6-7bar
air consumption 10l / cycle
engine power 1.5kW
noise level 76.1dB
revolutions 2800 / min
dimensions dł / szer / wys 1030/1030 ... more
2020
as good as new (ex-display)
Aluminium fence with 2 stops (composed by 1 right fence 1500 mm and 1 left fence 1500 mm)
N. 5 Bushes
N. 2 Patented safety clamps
Fitted to install dust collection system according to EC STANDARDS
Quick changes chucks
Cast iron made boring head
Cast iron made working table
Patented Spiral System
Pneumatic head rotation, lock and
stop from 0° to 90° at any angle
Adjustable fences on table, accurate
positioning with a ruler and magnify
glass
Digital counter for regulation of drills
height from th... more
CATALOG NUMBER M0252
PRODUCT FEATURES
The main features of the machine:
- Single-head drilling machine for drilling in the range of 0 - 90 °
- Pivoting angle of the head adjusted pneumatically
- Possibility to set lateral supports with an accuracy of 0.1 mm
- Safety holders allow quick adjustment of panels without adjustment
- Spindles adapted for quick couplers
- Patented pneumatic clamps of the material
- MDF work table
- Quick and accurate adjustment
- Precise drilling
- Italian production
... more
MAIN FEATURES
• Cast iron made boring head
• MDF and cast iron made working table
• Patented Spiral System - device for
quick boring depth adjustment
• NEW - Boring-head rotation by an electric device
(instead of pneumatic rotation) frontal drives with digital
read-out display. Lock and stop reference
from 0° to 90° at any angle.
• Adjustable fences on the table with
digital counter for decimal shifting adjustment
• Digital counter for regulation of drills height from the table
• Rear fence max ... more
2020
new
MAIN FEATURES
• Quick changes chucks
Jsvmb3
• Cast iron made boring head
• MDF and cast iron made working table
• Patented Spiral System - device for
quick boring depth adjustment
• Pneumatic head rotation with lock and stop reference
from 0° to 90° at any angle
• Adjustable fences on the table with
digital counter for decimal shifting adjustment
• Digital counter for regulation of drills height from the table more
Boring and milling machine make UNION type BFT 90/3-1
Make # 1930424 Year of construction 1986
Technical data:
X-axis travel 1600 mm
Y-axis travel 1250 mm
Z-axis travel 1600 mm
quill travel 750 mm
Spindle holder MK 5
max. workpiece weight 3,5 t
drilling spindle 90 / 102 mm
Spindle speeds 8 - 1600 rpm.
driving power 16,5 kW
Bnctqeceta
Weight approx. 9.7 t
with
- 3-axis digital display Heidenhain
used, in good condition more
Semi-automatic boring machine 35 spindlesBrand: VITAPTyp: ALFA 35 TNew machine Technical data: - One boring head 35 spindles; - Quick change spindles; - Pneumatic cylinder for horizontal/vertical positioning of the boring group (45 degrees and any intermediate angles); - Frontal/top aliper to obtain the same boring measure between horizontal and vertical position; - Tilting side stops adjustable by metric scale and nonius and magnifying lens on each stop; - 2 safety clamps inclined 4 degrees; -... more
Special frame dowel boring machine
360 ° rotatable multi-spindle drilling head
cleaned, function tested, Probelauf
Manometer exchanged
Table ground
Pneumatics sealed
Customized
used, top condition
Manufacturer Götzinger
Type RB-T
Year of construction 2005
Mach.-No.. 1655
CE type-tested
Cfrdehj
Number of drill holes 1
Drilling head 1 piece
Drilling head rotatable 360 ° infinitely variable
Number of spindle 5
Spindle pitch / pitch:
32-32-32- + 22-22-22
-0 ° - 90 ° - 180 ° - 360 °
Drilling horizon... more
Bore diameter variabel mm
Number of heads horizontal 1 St.
Number of heads vertical 0 St.
1 Götzinger Dübelleim- und Einpressmaschine BLE
Nlmn9
Grundgestell in stabiler Schweisskonstruktion, mit Blech verkleidet
Tischauflage ca. 200 x 1160 mm
Pos. 1
*****
1 Leimstation
Vollstrahlventil
Leimmenge exakt einstellbar
Leimpistole für Gegenlochbeleimung
Pos. 2
*****
1 Leimpumpe aus Edelstahl, Hochdruckpumpe und Leimschlauch
Pos. 3
*****
1 Einpressstation mit Dübelvereinzelung und Einpressz... more
core drilling diameter max.:60 mm
Xojys30xn
bore depth:320 mm
number of spindles:1
bore spindle turning speed range:335 + 616 U/min
feed speeds:20 - 640 mm/min
rapid speed:5,4 m/min
total power requirement:24 kW
weight of the machine ca.:12 t
dimensions of the machine ca.:5,6 x 6,1 x 2,1 m
Deep hole drilling machine ( ejector type ) in good condition with centrifuge and cutting oil device. more
spindle diameter 125 mm
x-travel 1120 mm
y-travel 710 mm
w-axis 630 mm
z-axis 315 mm
table surface area 900 x 1400 mm
table load 2000 kp
feed range - boring 0,025-2,24 mm/U
turning speed range n:20 36-2240 U/min
rapid travel z-direction 2500 mm/min
rapid travel w-direction 1400 mm/min
electrics - voltage/frequency 380/50 V/Hz
spindle taper SK 45
total power requirement 11 kW
weight of the machine ca. 9 t
Nlpnt
dimensions of the machine ca. 3,9 x 2,6 x 2,9 m
- 2-axis DRO
- exhauster
- variou... more
Control system: Heidenhain iTNC 530
Total hours: 33829 h
Hours on: 26417 h
Bgehwpx8
Length of the working table: 2600 mm
Width of the working table: 1800 mm
Maximum table load (evenly distributed): 15 t
Number of synchronous axles: 4 pcs
Minimum rotary speed of the spindle: 10 1/min
Maximum rotary speed of the spindle: 3000 1/min
Travel length X-axis (mechanical feed): 4000 mm
Travel length Y-axis (mechanical feed): 2500 mm
Travel length Z-axis (mechanical feed): 1500 mm
W-axis: 730 ... more
Troughfeed boring machineMake: VITAPType: ACOUSTICfor creation of acoustic panels for noise reduction Boring machine with through feed panel, boring from the bottom and automatic panel return to the operator. Technical data: N.1 drilling head 55 spindles x32 mm. system n. 55 adaptors for quick chucks The heads rotate at 2800 rpm Lubrication: seals with grease Max. thickness of the panel 50mm Max weight of the panel: Kg 50 Max panel size : X no limit, Y 1250 mm, Z 50 mm Min panel size: X 400 m... more
used
manufactured by Scheer
type DB 5
built in 1991
Masch.-No. 508812
number of spindles 21 piece
number of drilling beams 1
drilling from bottom
tiltable manual
hydraulic feeder brake
fences 3 piece
drill chuck M 10 internal thread
Cpt9bsvrs
guide fences 2450 mm
clamp 2 piece pneumatic
grid 32 mm
moveable
required space ca. l x w x h mm
900 x 1500 x 1400 without lineal
weight ca. 350 kg
located in 97447 Gerolzhofen
sale in current condition as seen
- free on truck - more
Technical details
spindle diameter 105 mm
x-travel 1800 mm
y-travel 1100 mm
z-travel 1250 mm
spindle stroke 700 mm
tool taper ISO 50
spindle turning speed range (21) 9 - 1000 U/min
table surface area 1400 x 1100 mm
table rotation 360° deg.
table load capacity - central/maximum 4000 kg
main drive motor 9 kW
weight of the machine ca. 11,5 t
dimensions of the machine ca. 4650 x 3900 x 3000 mm
Additional information
* 3-axis Heidenhain D.R.O.
* motorized tool-clamping
* angular milling head
* coolan... more
The machine is fully functional and in good technical condition.
Guaranteed accuracy of adjustment: 0.005 mm
Work table clamping surface: 700 x 600 mm
Bfeb3br3w0
Working table longitudinal adjustment: 600 mm
Transverse headstock adjustment: 500 mm
Largest bore diameter: 230 mm
Drilling spindle stroke: 180 mm
Machine weight: 3775 kg more
spindle diameter 150 mm
Jvbtay
x-travel 2000 mm
y-travel 1600 mm
Control SIEMENS 840C
z-travel 1000 mm
w-axis 850 mm
table-size 1600 x 1250 mm
table load 8 t
total power requirement 80 kW
weight of the machine ca. - t
dimensions of the machine ca. - m more
GO 2015
Maximum boring diameter: 115 mm
Length of the working table: 1250 mm
Width of the working table: 800 mm
Cone: ISO 40
Machine weight: 7.5 t
Equipment:
Turntable
Folding table
Preparation for grinding
Ntwht
Knife heads more
used
Dowel drilling machine Brand: Ayen 21 spindle, grid 32 mmdrilling head swivable 90°workpiece clamping with 3 pneumatic cylinderstriggering clamps and drilling head through foot pedalclamps are moveablesupport table with integrated measuring scale as well as two-sided straightedge extension each one incl. a stopdrilling motor: 2,2 kW Note:The specifications and descriptions are a copy of the order confirmation at that time. Datas are for information and are not binding.
Bdola3ccpk more
1980
used
used
manufactured by Scheer
type DB 5
built in 1980
Masch.-No. 508054
number of spindles 21 piece
number of drilling beams 1
drilling from bottom
tiltable manual
guide fences 2 piece
working width 800 mm
drilling depth 80 mm
pendulum fence 4 piece
clamp 2 piece
grid 32 mm
drilling unit
required space ca. l x w x h mm
1200 x 800 x 1300
weight ca. 300 kg
total connected power 2,2 kW
located in 97447 Gerolzhofen
sale in current condition as seen
B03zkoau
- free on truck - more
spindle diameter:130 mm
x-travel:2780 mm
y-travel:2520 mm
z-axis:2500 mm
w-axis:1000 mm
B-axis (table):360.000 x 0,001 °
U-axis:320 mm
spindle taper: ISO:50
spindle turning speed range:5 - 1000 U/min
N2blv
spindle motor:45 kW
feed range:5 - 2500 mm/min
Table area:2000 x 1800 mm
weight of the machine ca.:36 t
rapid traverse::5000 mm/min
total power requirement:70 kW
dimensions of the machine ca.:6,0 x 6,0 x 4,9 m
Machine with Heidenhain TNC 355 CNC control for 5 axis
- universal milling head
- ... more
.
Travel distance in X = 400 mm
Travel in Y = 500 mm
Table surface 520 x 380 mm
Clrqevf
.
8 speeds from 75 - 2000 rpm
6 drill feeds from 0.02 - 0.18 mm/rev
.
WxDxH approx. 1.6 x 1.7 x 1.9 m
Weight estimated 2 to
.
..... more
spindle diameter: 63 mm
x-travel: 800 mm
y-travel: Höhe: 690 mm
z-travel: längs:1400 mm
b-axis: 90 °
w-axis: Bohrspindelvorschub:560 mm
U-axis: Planschiebervorschub:150 mm
tool taper: SK 40
clamping surface area: 1040x850 mm
table rotating: 90 li/re °
feed: Tisch: 0,002 - 0,68 mm/min
drill depth: 540 mm
M3j8j
revolution per minute: 4 - 1400 U/min
total power requirement: 4,0 kW
weight of the machine ca.: 5,3 t
dimension machine xH: 3,90 x 1,90 x 2,20 m
Horizontal Table Type Boring and Milling Ma... more
Ref. -No.: 10075
Brand: FERMAT
Type of control: CNC
Control: Heidenhain iTNC 530
Storage location: Mülheim an der Ruhr
Country of origin: Deutschland
Installation: 2014
X-Travel: 9800 mm
Y-Travel: 3500 mm
Z-Travel: 600 mm
W-Axis: 730 mm
Spindle Diameter: 130 mm
Bj8xwsfz
Spindle Taper: SK 50
Rotary Table (Lxw): 2000 x 2400 mm
Table Load: 20000 kg
Support bearing: 250 mm
Main Drive: 37 kW
Numbers Of Pallets: 2
Size Of Pallet: 4000 x 1885 mm
Servo drive: 2 Pcs
pinion: 2 Pcs
Internal cooling: 30 ... more
Dowel hole drilling machine Brand: VITAPType: ALFA 27 T - One Boring Unit 27 spindles;- QUICK CHANGE SPINDLES;- Pneumatic cylinder for horizontal/vertical positioning of the boring group(45 degrees and any intermediate angles);- Frontal/top aliper to obtain the same boring measure between horizontal and vertical position;- Tilting side stops adjustable by metric scale and nonius and magnifying lens on each stop;- 2 safety clamps inclined 4 degrees;- Height regulation of the boring group by mecha... more
used
manufactured by Ayen
type DB 1000 K2
built in 1977
Mach.-No. 751212
number of spindles 23 piece
number of drilling beams 1
drilling from top
tiltable pneumatic
comb lowering pneumatic
drill chuck D 10 mm
clamp 3 piece
grid 32 mm
required space ca. l x w x h mm
1200 x 800 x 1600
weight ca. 370 kg
total connected power 2,2 kW
located in 97447 Gerolzhofen
sale in current condition as seen
- free on truck -
E98ue82x more
spindle diameter 80 mm
x-travel 1600 mm
y-travel 1000 mm
z-travel 1500 mm
table-size 1150 x 1000 mm
spindle taper MT 5
Boring depth max. 600 mm
turning speed range 12 - 1000 U/min
feeds 0,04 - 1,38 mm/U
total power requirement 5,5 kW
Beoh8za7ja
weight of the machine ca. 7,8 t
range L-W-H 5,30 x 2,90 x 2,54 m
acc.: DRO on X- and Y-axis more
Second-hand machineBuilt: 1995 Condition: workshop checkedFor handicraft production or as stand-by machine in CNC-operation,universal machine for drilling of carcass parts and for processing of corner joints, frame joints flat side drillings, drillings for cabinet fittings, hnical data (under reserve):- drilling unit kW 1,84 Volt 230 / 300 Hz 50 speed rpm 2840 - number of spindles: 21 - spindle pitch mm 32 / 32 - max. spindle distance mm 640 - spindle rotation direction 11 x right / 10 x left - ... more
boring spindle diameter: 100 mm
x-axis: 1250 mm
y-axis: 1100 mm
z-axis: 950 mm
quill stroke: 630 mm
control: Heidenhain TNC 135 (Strecke)
number of spindle speeds: min./max.: 8 - 1250 / 9 step U/min U/min.
feed speeds: 4 - 2500 mm/min mm/min
tool taper: ISO 50
table surface area: 1120 x 1000 mm
table rotating: 360 Grad
table load: 3,0 t
total power requirement: 50,0 kVA kW
weight of the machine ca.: 13,4 t
dimension machine xH: 4,9 x 3,4 x 3 ,6 m
dimensions electric cabinet LxWxH: 2,0 x 0,65 ... more
core drilling diameter max. 1 - 30 mm
bore depth 250 mm
swing diameter 300 mm
total power requirement kW
Nlzzz
weight of the machine ca. 2,5 t
dimensions of the machine ca. 3,2 x 2,1 x 1,6 m more
spindle diameter:105 mm
x-travel:1760 mm
y-travel:1265 mm
z-travel:1170 mm
Table size:1250 x 1400 mm
table load:2,5 t
tool taper:ISO 50
Bfrojnknil
Year:Retrofit 2005
weight of the machine ca.:13,9 t
total power requirement:47 kW
speeds:4 - 2500 U/min
table positioning:360 Grad je 1 Grad ° more
spindle diameter 70 mm
x-travel 450 mm
y-travel 300 mm
z-travel 350 mm
surface area 700 x 300 mm
hydr. movements of the speed movement 2500 m/min.
outer clamping tapper SIP 2e
turning speeds 3000 U/min
weight 2,5 t
Mtzbmg
With 2 axes - Digital
Tools more
spindle diameter 96 mm
x-travel 1200 mm
y-travel 800 mm
z-travel 935 mm
table-size 950 x 1150 mm
spindle taper ISO 50
table load max. 3 t
turning speed range - facing chuck 11 - 800 U/min
spindle drive 11 kW
feeds longditudinal/cross/vertical 2 - 1200 mm/min
rapid traverse 4,5 m/min
total power requirement kW
weight of the machine ca. t
W3urc
dimensions of the machine ca. m
Accessories: facing chuck more
1985
used
Used machine
Year of construction: 1985
condition: well preserved
machine table 920 x 440 mm
Three-phase motor 1.5 kW (2.0 PS); 3000 rpm, 400 V, 50 Hz
Main switch
EMERGENCY STOP as operating switch
Travel distance in the width 230 mm with stops
Travel path in the depth 150 mm with stop
Bmn2f0skb7
Travel distance in height 150 mm with position indicator
Clamping width of the drill chuck 1 - 20 mm
Two-lever operation
Dowel drilling device pitch 16, 22, 25 and 32 mm
Eccentric clamp with cross piec... more
Technical details
Bnct3utq3k
spindle diameter 160 mm
x-travel 8000 mm
y-travel 3000 mm
Control Siemens 850 M
tool taper ISO 50
dimension of the ram 450 x 450 mm
ram stroke 1250 mm
spindle stroke 1600 mm
spindle turning speed range 1000 U/min
max. torque on the spindle 8000 Nm
main drive 52 kW
dimensions of the machine ca. 15,5 x 11,5 x 5,0 m
Additional information
Equipment:
NC-controlled rotary table
Clamping surface 3150 x 3150 mm
Table load max. 35 tons
1 piece floor plate 6400 x 1850 mm
... more
SIEMENS control system.
year of manufacture 2006
cone spindle diameter / 150 / ISO 50
table clamping surface 2000/2500
maximum unloaded spindle quill 800
headstock 900
total unloading 1700
vertical movement of the spindle above the table 2000
above the motherboards 2400
adjusting the table 2500 longitudinally
Eqc9fgd
total travel 8000
accessories IFVW 206 cross head more
CNC universal milling & drilling machine DECKEL MAHO DMU 60 monoBlock
With Heidenhain iTNC 530 contouring control
Year of construction: 2007
Travels: X 730 Y 560 Z 560
Speed range: 0 - 12,000 rpm infinitely variable ( SK 40 )
With the following accessories:
Rigid angle table 1000 mm x 600 mm Clamping surface
NC - rotary table integrated in rigid table 0 600 mm
Controlled swivel milling head ( B axis )
3 D measuring probe Heidenhain TS 640
Vertical tool changer with 24 magazine places ( SK 40 )... more