Used Earth Boring Machine for sale (65,191)

Condition: good (used), Slot Mortising Machine L2 - Year of manufacture: 1977 - Weight approx. 220 kg Lsdpfx Asywnuwjhvjhd - Overall dimensions approx. 1,120 x 880 x 1,120 mm (W x D x H) - Table height approx. 980 mm - Table size approx. 820 x 350 mm - Power consumption 3.2 A / 3-phase power connection - Drilling depth approx. 150 mm - Drilling length approx. 200 mm - Max. drilling height approx. 120 mm - Drill chuck approx. 3–20 mm

Condition: good (used), Year of construction: 1999, Slot mortising machine CM104 - Year of manufacture: 1999 - 400 Volt - with dowel boring unit featuring locating pin and remote control Lsdpfxsywnqlj Ahvehd - robust construction - single-lever operation - 2-jaw Westcott drill chuck - extraction unit

Year of construction: 1981, condition: used, machine/vehicle number: 3328781, Stop adjustment in x-axis up to approx.: 1150 mm Stop adjustment in y-axis up to: 150 mm Ledpebnpcwofx Ahvehd for material thickness theoretically up to: 190 mm electrical connection: 380 V space requirement: 2050 x 850 x 1200 mm Weight: 138 kg

Year of construction: 1985, condition: used, machine/vehicle number: 16085001, Table size: 480 x 1200 mm Procedures x 650 mm y: 420 mm w: 210 mm w (drill head height adjustment): 540 mm smallest/largest distance between table and spindle nose: 0/720 mm Throat depth: 450 mm Spindle retainer: System SF 32 Infinitely variable spindle speeds: 25-5600 RPM Spindle drive: 380 V, 6 kVA Ledpfx Ahsb H D Idsvehd Approximate weight: 3 tons Space: 2000 x 2200 x 2300 mm

Condition: used, Lot consists of: (1) universal milling machine Ljdpfx Aeylacbehvshd

Condition: used, spindle diameter 90 mm x-travel 700 mm y-travel 500 mm Control Heidenhain bore capacity in steel 40 mm spindle taper MK 4 bore spindle stroke 170 mm spindle turning speed - stepless 10-2.000 U/min ll diameter 230 mm table dimensions 900 x 770 mm vertical travel of crossrail-slide 630 mm boring spindle 6 Stück/ 0.02-0.20 U/min distance between columns 900 mm Passage between spindle and table 815 mm spindle drive 4 PS Lsdpfx Ahoxwzg Rjvohd total power requirement 380 V weight of the machine ca. 3,9 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, throat 215 mm thread M2 - M10 thread depth max. 60 mm spindle MK 2 bore depth 90 mm 150 bis 450 mm 220 x 285 mm column diameter 75 mm mm Total height 950 mm motor speeds: 700 / 1400 1/min weight of the machine ca. 95 kg Lhjdpfx Aheyv N Ddevjd

Condition: excellent (used), Year of construction: 2001, Felder slot mortising machine FD-250 Motor power: 2.2 kW Year of manufacture: 2001 Height adjustment via handwheel Lever operation 2 manual clamps Includes several slot mortising cutters Ljdpfx Aeyvv Ngehvshd Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2007, Gebr. Hess LLB 300 slot mortising machine – school model – Drilling width: 240 mm Drilling depth: 180 mm Lhedjx Nrgujpfx Ahved Drilling stroke: 160 mm 2-speed motor 1400/2800 rpm instead of 1.5 – 1.9 kW Motor speed: 2800 rpm Chuck mount: 20 mm Table size: 600 mm x 320 mm Pressing system: 2 eccentric levers Weight: 246 kg 1 piece 2-speed motor 1400/2800 rpm 1 piece stop gauge 90° 1 piece horizontal drilling grid system with 4 rows of holes: 16, 20, 22, 25 mm; with Bowden cable control 2 pieces eccentric pressers with column Single-lever operation Location: ex stock 54634 Bitburg – immediately available –

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Ledeqa Txqopfx Ahvshd Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: excellent (used), Numerical Control Type NC 500 (Software Tooling System) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) Lhjdpfeyvrrqex Ahvod No. 8 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 4 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 72,2 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (X axe) of the conveyor belts The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: excellent (used), Motor power 1.2 HP, 400 V, 50 Hz Speed 2800 rpm Drilling table size 650 x 330 mm Cross adjustment 300 mm Lhjdpfxovzrame Ahvjd Depth adjustment 150 mm Height adjustment 170 mm Table height 880 mm Weight approx. 280 kg

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Lhsdpew Nmw Hsfx Ahvod Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: - Tools + accessories - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement.

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1985 Features and technical data: - For construction drilling horizontally and vertically - For vertical row drilling with 32 mm spacing - Vertical drilling unit with freely positionable double spindle drill heads on index shaft - 1.5 kW motor with 1400 rpm - 1.5 kW motor with 2800 rpm - Drill heads with pneumatic stroke Lhjdpswka Hfefx Ahvsd - Pneumatic material clamps - Pass-through width approx. 850 mm - Includes various stops and drill bits Availability: short notice Location: Röllbach

Condition: used, Used machine Used row drilling machine of the company Ganner type RB 107 serial no.: 121627 Motor power: 1,5 kW Motor speed: 2800 rpm 1 drill beam with 26 spindles, center distance 32 mm 3 hold-down devices 1 foot switch Lsdpfx Aew I Unwshvjhd Availability: short term Location: Röllbach

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1985 Universal dowel drilling machine with swiveling drilling unit Lhsdpsyvl Hzofx Ahvsd with fully automatic control with 2 safety pneumatic clamps Drill motor 2.2 kW with 21 spindles Spindle pitch: 32 mm with attached oil damper Height adjustment: 80 mm Drilling depth: 80 mm Weight: 420 kg Availability: short notice Location: Röllbach

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Multi-spindle universal dowel drilling machine with 3 CNC axes (+/- 0.1 mm) with horizontal and vertical drilling capability electronic adjustment of height, depth, and drilling angle (0-90°) with 7" color touchscreen with memory for up to 1000 programs with parallel fences with numerical adjustment with 21 drilling spindles (10 left, 11 right) Spindle spacing: 32 mm Maximum drilling distance: 640 mm Maximum tool diameter: 40 mm Maximum drilling depth: 65 mm Maximum horizontal drilling height: 35 mm Working height: 860 mm Maximum panel thickness: 60 mm Maximum panel size: 900 x 3000 mm Lhjdpfx Aslk R Epshvod Motor: 1.5 kW - 2800 rpm Pneumatic connection: 6/8 bar Compressed air consumption per work cycle: 5 NL Extraction port: 80 mm Machine footprint: 1580 x 950 x 1400 mm Net weight: 340 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: well-maintained Lodpfx Aexwz Ihehvehd Equipment and technical data: - Number of drilling spindles: 21 pcs, 32 mm pitch - Drilling direction: from below and end-face - Swivel: 0–90 degrees via handwheel - Pneumatic material clamps: 3 pcs - Passage: max. 100 mm height and max. 640 mm width - Motor: 1.5 kW - Extraction connection diameter: 120 mm - Includes a variety of stops (see pictures) Availability: approx. mid-April 2026 Storage location: Hesse

Condition: used, Used machine Used Ganner Compact 30 line boring machine Equipment and technical data: 2 drilling beams with 15 spindles each Pitch 32 mm Position adjustment drilling unit 0 - 650 mm Distance between the rows of drill holes at least 190 mm Spindle speed 2800 rpm Motor power 2 x 0.75 kW Clamping height of the workpieces max. 70 mm Working height 850 mm Compressed air connection 6 bar Lhedpfx Aswhuh Sehved Availability: by arrangement Location: Solingen

Condition: excellent (used), Number of agregats 1 St. Motor output 0,37 kW connected load frequency 230 V Lock width 6x6 mm Rectangular drilling machine or mortising machine Scheppach type St 12 for drilling or mortising rectangular holes for doors, windows or similar applications. Lsdpfxeyvkt Te Ahvjhd

Condition: new, Year of construction: 2024, Hoku Houfek long hole drilling machine LLB VD 20 R Top condition - Top machine - Motor 1,5/1,9 kW, Transverse displacement in Y-axis 250 mm, Longitudinal displacement X 340 mm, Vertical displacement z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel drilling device with pitch 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, manual digital display for drill bit height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, table rotatable +/- 45°, weight approx. 345 kg immediately ex stock 54634 Bitburg Subject to prior sale, Lhodpfxsu Agzxj Ahvsd

Condition: good (used), Year of construction: 2001, Deep hole boring machine with many additional equipement. Ledpfoyuykdox Ahvohd

Condition: excellent (used), Year of construction: 1998, Used cnc horizontal milling boring machine Brand: AYCE Model: AC100-k4 Serial number: 740 Year: 1998 Power: 16kw Weight: 12,700kg AC100-K4 MODEL WITH CONTINUOUS ADVANCE VARIATION Numerical control: Heidenhain TNC124 with 4 axes (X, Y, Z, B) Number of bench supports: 4 (K4) OPTIONALS: - Cnc Heidenhain - Automatic positioning of the table rotation 4 x 90º. - Vertical course 1200mm (Instead of 1000mm that the standard model has) - Refrigeration equipment - Face plate and clamping arm - Universal vertical apparatus, Huron type with hydraulic tool clamping - Rest for vertical course of 1200mm - Table rotation display 4th AXIS (B) Principal axis: - Shaft diameter: 100mm - Inner cone: ISO 50 with quick tool clamping (Instead of Morse 5) - Drill mounting diameter: 171.45mm - Horizontal course of the main axis: 700mm - Vertical course of the main axis: 1200mm - Number of turning speeds: 18 - Speed range: 12-1200 rpm Lsdoizxbiopfx Ahvjhd - Maximum distance between plate and steady rest: 2250mm Advances: - Number of work advances in all directions: INFINITE - Min/max value of work progress: 2 - 1500 mm/min. - Rapid advances in carriages and head: 3000 mm/min. - Rapid advance main axis: 1500 mm/min. - Rapid table rotation advance: 600 degrees/min. Rotary table: - Turntable dimensions: 1100x1200mm - Table longitudinal course without steady rest: 1500mm - Curos longitudinal table with lunette: 1200mm - Cross course: 1700mm - Distance between axis/maximum table center without steady rest: 1975mm - Distance between axis/maximum table center with steady rest: 1600mm Automatic centralized greasing. Hardened and rectified guide. Telescopic guide protectors. Ball screws in the 3 axes. Automatic hydraulic locks in all movements.

Condition: good (used), used boring machine Brand: Juaristi Model: MDR 75 Weight: 5600kg Motor power: 10KW 2-axis digital FAGOR. Lhedpfx Ahoh Ryc Hovsd Shank diameter: 75mm Longitudinal course (X axis): 1,150mm Vertical course (Y axis): 700mm Column transversal course (Axis W): 800mm Cane exit course (Z axis): 500mm Table surface: 900x700mm Speeds: 22-1055rpm Number of advances: 9 of 0.04-3 mm/rev.

Condition: used, Year of construction: 1984, Dowel boring machine Year of manufacture: 1984 Suitable for: Row drilling Cabinets Fittings Frames Standard swiveling device Max. passage: 820 mm Working width: 704 mm 23 drilling spindles; 32 mm spacing; drill attachment with M 10 thread, left and right Max. drill diameter: 40 mm Drilling depth horizontal: 120 mm Lodpfxeyulfto Ahvohd Vertical: 80 mm Max. clamping height: 92 mm Motor power: 2.2 kW Air consumption at 6 bar approx. 6 l per cycle Weight approx. 340 kg Availability: short-term Location: Flörsheim