Used Multi Boring Machine for sale (68,358)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Machine type: Tool milling machine Manufacturer: Knuth Model: UFM 2 Year of manufacture: 2008 Serial number: 143516 WORK TABLE Bdsdpfx Ae Ad Acqeknei Table dimensions: 1,330 x 320 mm Number of T-slots: 5 TRAVEL RANGES Travel range X-axis: approx. 500 mm Travel range Y-axis: approx. 400 mm Travel range Z-axis: approx. 400 mm ELECTRICAL DATA Operating voltage: 400 V Frequency: 50 Hz Connected power: 5.3 kW MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 1,800 mm Height: 2,000 mm Weight: 2,000 kg

Condition: excellent (used), functionality: fully functional, 21 spindles Bodozz N Tmepfx Aknsdi spindles right/left table dimensions 840x440mm 2 pneumatic clamps spindles span 32mm pedal control pneumatic setting vertical/horizontal

Condition: excellent (used), functionality: fully functional, number of spindles: 35 pneumatic head inclination Bedpow U Aiisfx Aknsdi

Year of construction: 2004, condition: good (used), I sell the multiple boring machine SCM TOP 35, Year 2004. Number of spindles 35 Offset 32mm 6 positions for pre-set drilling depths Bjdjiu Urpspfx Aknedi 2 Aluminium fences 2 x 1500mm 4 stoppers for Aluminium fences 4 material pressures pneumatic 2 electromotors 2 x 2,2KW Tilting 0-90° full servomotorical Two-step drilling with pneumatic active piston / max. Drilling depth140mm ! Max. Element width over the drilling head 1280mm. Total weight 693kg. Very good condition. Available immediately.

Condition: good (used), Year of construction: 2015, I sell the multiple boring machine Detel M-21, year 2015. Available immediately. Bdjdpfxetmwnij Aknoi

Condition: excellent (used), functionality: fully functional, 29 spindles left/right spindles spindles span 32mm horizontal or vertical drilling Bsdszz N S Aspfx Aknsdi setting of depth of drilling pneumtatic movement of drilling head

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, HENRI HAUSER OP3 High-precision drilling machine / Coordinate drilling machine / Jig boring machine (Made in Bienne/Biel, Switzerland). Excellent condition! Only available online until November 16, 2026! The offer has been updated and now includes even more accessories! Tool package with a value of approximately 12,500 EUR. A unique opportunity for connoisseurs of these machines at a special price. Hauser coordinate drilling machines in this condition are now mostly only available from specialized dealers in Switzerland, but at significantly higher prices, up to three times my asking price. Please compare for yourself! Due to the large number of inquiries: please only serious interested parties with a genuine intention to purchase, installment payments are not accepted! As long as the ad is online, the machine is still available. An inspection while the machine is powered on is expressly possible. Only to be sold to appreciative users, such as watchmakers, precision engineering workshops, or testing workshops/prototype construction, not to profit-oriented dealers. The coordinate drilling machine has been with its original owner for 41 years and features the rare option of a motorized table drive/rapid traverse in the X and Y axes, as well as potentiometers. The stepless feed in the X axis also allows for light milling and surfacing operations. This eliminates the need for laborious manual cranking, as is the case with all other Hauser coordinate drilling machines. Bdjdszuvwljpfx Aknoi The machine features thermal stabilization and expansion compensation. To this end, 2 heaters are provided, which are switched on separately before starting work and to maintain high accuracy and dimensional accuracy. This explains the factory-high positional accuracy of 0.002 mm. It is worth mentioning that the machine has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a great advantage for precise drilling and surfacing in depth with Wohlhaupter, spindle tools, etc. With the options mentioned and in this first-class condition, it is very rare and most likely no longer available in this form. These machines are primarily used in the watch industry, gunsmithing, precision engineering, materials testing and the optical industry, where the highest precision is required. Also ideally suited for engine construction/overhaul, special machine construction, etc. All documents, manuals, electrical wiring diagrams, etc. are available in their original form! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X axis = 400 mm, transverse travel Y axis = 250 mm, Vertical travel Z axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle connection MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds stepless from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 stages from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 HP Machine dimensions: Length = 1400 mm, Width = 1250 mm, Height = 1750 mm, Machine weight approx. 1500 kg. Payment for the machine will be made, as is customary with used machines, in full net before loading, no partial or installment payments! I prefer the machine to be collected by the buyer by means of a transport company or their own truck. Loading onto a truck is free of charge for the buyer. Shipping (direct transport without reloading) within the EU is still possib

Condition: good (used), Year of construction: 1974, TOYOSK 01BB Fixed 12 Multi Spindle Machine Manufacturer: TOYOSK Type: 01BB Bedpevbcydofx Aknsdi Year of manufacture: 1974 Spindle: 12 Bore: 6mm, 12 points simultaneously Feed: 100mm Speed: 2-speed (2500 / 2850rpm) Spindle diameter: 19-23 mm Table size: 350 x 450 mm Spindle speed: 2200-450 mm Power: 1.5 kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Manufacturer: Knuth Model: VH F1 Machine type: Milling machine Machining process: Shank milling MACHINE DETAILS Length: 1,500 mm Width: 1,000 mm Bdjdpj Ad Iuxjfx Aknoi Height: 2,000 mm Weight: 700 kg

Condition: used, Year of construction: 2000, 1 Coordinate drilling machine HARTKÄMPER KB50-600 Manufacturer: HARTKÄMPER, Type: KB50-600, Year of manufacture: 2000 Dimensions (W x H x D): approx. 100 x 220 x 250 cm, moving carriage above the spindle, 2-hand operation, Bsdpfx As Ahna Heknjdi operator terminal, and roller conveyors on both sides approx. 60 x 600/700 cm with supports and table frame.

Condition: used, Year of construction: 1988, machine/vehicle number: 13.088.094, travel distance X-axis: 420 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 120 mm, spindle speed (max.): 9,000 rpm, controller model: HEIDENHAIN TNC 155, drilling depth: 120 mm, No minimum price – guaranteed sale to the highest bidder! Bdedpfx Akoz Ilu Rsnji Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range, X-axis: 420 mm Travel range, Y-axis: 240 mm Travel range, Z-axis: 120 mm Travel range, A-axis: ± 30,000 ° Table clamping surface: 780 × 230 mm Drill head adjustment range: 450 mm Spindle speed: 50–9,000 rpm Spindle motor drive power: 3.7 kW Drilling capacity in steel: 20 mm Drilling depth: up to 120 mm Rapid traverse, X-axis: 7 m/min Feed rate, X-axis: 7,000 mm/min Rapid traverse, Y-axis: 7 m/min Feed rate, Y-axis: 1–7,000 mm/min Feed rate, Z-axis: 0.02–0.30 mm/rev Rapid traverse, A-axis: 10,800 °/min Feed rate, A-axis: 1–10,800 °/min MACHINE DETAILS Control system: HEIDENHAIN TNC 155 Operating voltage: 380 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,200 x 2,000 x 2,400 mm Weight: 2,000 kg EQUIPMENT Built-in workshop drawer cabinet Hand tools Milling cutters Matching tool holders Collets External Reference: C.O. - Lot 23

Condition: used, Year of construction: 1933, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,259 mm, travel distance Z-axis: 1,500 mm, table length: 1,250 mm, table width: 1,400 mm, overall weight: 10,500 kg, x-travel 1600 mm y-travel 1259 mm z-travel 1500 mm tool adaptor SK 50 weight 10,5 t output 49 kw feed 6000 m/min control Heidenhein 151 1600 min Bdjdpfoz Aun Sox Aknoi table: 1250-1400 mm serial number 1933 weight of the machine ca. 10,5 t

Condition: excellent (used), functionality: fully functional, two bottom heads one side - right head heads with 21 spindles spindles span 32mm motors 3x1,1kW 2 pneumatic pressure regulation of span between heads Bedpfsz D Acwsx Aknsdi right/left spindles

Condition: excellent (used), functionality: fully functional, mileage: 18,491 km, gearing type: hydrostat, fuel type: diesel, color: red, overall weight: 28,000 kg, empty load weight: 28,000 kg, tire condition: 80 %, drive condition: 80 %, axle configuration: 4x4, number of seats: 1, mast type: telescopic, suspension: parabolic leaf (spring), Year of construction: 2008, operating hours: 18,491 h, Equipment: additional headlights, adjustable chassis, air conditioning, all wheel drive, cabin, hammer hydraulics, hydraulics, onboard computer, parking heater, For sale: a 2008 JAMA SBU 8000, a specialized, self-propelled rock breaker designed for use in mines and tunnels. The machine is equipped with a boom and an Epiroc hydraulic hammer, used for removing loose rock fragments from the roof and walls and preparing the excavation for further work. A significant advantage is the ability to operate using an internal combustion engine or external electrical power. When connected to a suitable electrical grid, the working unit can operate with the diesel engine turned off. This allows for rock breaking without emissions from the machine's engine in the workplace, a particularly beneficial solution in tunnels and enclosed underground excavations. Additionally, the machine has a compressor mounted in the rear. MACHINE SPECIFICATIONS • Make and model: JAMA SBU 8000 • Year of manufacture: 2008 • Serial number: 8018 • Weight according to nameplate: 28,000 kg • Working equipment: Epiroc hydraulic hammer • External electrical power: 1000 V • CE marking INTERNAL COMBUSTION ENGINE – DEUTZ The machine is equipped with a Deutz TCD 2013 L06 2V six-cylinder industrial engine. This is a turbocharged diesel engine with liquid cooling and intercooling, designed for use in heavy-duty construction machinery. Bsdpfx Aks Afihijnjdi • Model: Deutz TCD 2013 L06 2V • Type: four-stroke diesel engine • Cylinder arrangement: inline, 6-cylinder • Displacement: 7146 cm³ / approximately 7.15 l • Rated power according to the engine nameplate: 200 kW / approximately 272 hp • Rated speed: 2300 rpm • Turbocharging: turbocharger with intercooling • Fuel injection system: Common Rail • Cooling: liquid • Number of valves: 2 per cylinder • Cylinder bore × piston stroke: 108 × 130 mm • Electronic engine management • Unit labeled with Deutz Xchange – manufacturer's engine exchange program OPERATION WITH ELECTRICAL POWER • Possibility of powering the working unit from an external electrical grid • Operation of the equipment with the internal combustion engine turned off • No emissions from the diesel engine during electrical operation • Cavotec cable reel • A solution particularly useful during long-term work in tunnels and underground excavations EQUIPMENT • Working boom with Epiroc hydraulic hammer • Compressor in the rear of the machine • Hydraulic stabilizing supports • Hydraulically controlled front blade • Enclosed operator cab • Control panels with emergency stop buttons • Presto fire suppression system • Hydraulic system for operating the boom and equipment The JAMA SBU 8000 is a machine for companies involved in tunnel construction, underground mining, and rock breaking. The combination of the Deutz engine, the ability to electrically power the working unit, and the Epiroc hammer allows you to adapt the method of operation to the conditions prevailing in the excavation. Please contact us for detailed information and to arrange a viewing.

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, drilling depth: 1,500 mm, feed length X-axis: 2,030 mm, feed length Y-axis: 1,800 mm, feed length Z-axis: 1,700 mm, table length: 2,200 mm, table width: 1,800 mm, table load: 12,000 kg, Deep hole drilling machine Ixion (drilling depth 1500mm, X 2030mm, Y 1800mm, Z 1700mm) The base machine is a PEGARD drilling machine AF 13 (year of manufacture 1976, machine weight approx. 32 t) 1996: Retrofit and conversion to a deep hole boring machine (the conversion was carried out by ROTTLER Maschinenbau GmbH - Mudersbach) 2024: Overhaul (spindle bearings renewed, drill bushing holder/coolant supply disassembled and cleaned, hydraulics for tool clamping repaired, coolant system and hydraulic unit cleaned and inspected, etc.) Working ranges: - X-axis (longitudinal) 2030mm - Y-axis (drilling unit vertical) 1800mm - Z-axis 1700mm - Drilling depth in one operation 1500mm - B-axis (rotary table) 0-360° Drilling unit: - Main spindle ISO40 - Spindle speed 60-6000 rpm - Drive power at 100% ED 7.5kW NC rotary table (B-axis) - Table surface 2200x1800mm - Rotary axis 0-360° - Max. table load 12,000kg - Positioning accuracy +/-15 sec Coolant system/chip conveyor Bdsdpfjy Rhzwox Aknsi - Tank size approx. 1000l - Coolant pressure max. 80 bar - Flow rate max. 46 l/min - Paper band filter - Scraper conveyor/chip conveyor CNC control - Mitsubishi M325 with 14" color screen - Integrated tool breakage monitoring by querying the torque of the main spindle - Real-time process variable visualization of torque - Deep hole drilling technology programs - Portable electronic handwheel

Condition: used, Year of construction: 1996, functionality: fully functional, SECOND-HAND MULTIPLE BORING MACHINE CAMAM MOD. FMV/4U - 4 BORING UNITS - N. 4 independent boring units Bdedpox N S Tbefx Aknsi - Control panel - Year 1996 - CE rules

Condition: excellent (used), functionality: fully functional, 23 spindles Bdsdpfx Aszz N S Nsknsi left/right spindles 3 pneumatic clamps spindles span 32mm pedal control CE

Condition: ready for operation (used), Year of construction: 1978, travel distance X-axis: 8,300 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 500 mm, Floor boring machine WMW Union BFP 130/5 X-axis: 8300mm Y-axis: 2500mm Bdodpfxjzt Iqbo Aknji Z-axis: 500mm W-axis: 900mm Spindle diameter: 130mm Spindle taper: ISO 50 Rotary table: 2000x1800 2 x floor plates: 3500x1750 Year of manufacture: 1978 Milling head Tailstock DRO Heidenhain Spindle stabilizer Boring bar Many accessories ✅ Excellent working condition Total weight: 53 tones

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a Bdodpfx Aksz Df Txjnji higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: used, Year of construction: 1973, functionality: fully functional, machine/vehicle number: 246, drilling depth: 145 mm, drill chuck size: 20 mm, overall weight: 220 kg, power: 2 kW (2.72 HP), Panhans long-hole drilling machine, type no. 116. Bdjdpfxozkqg Hj Aknji

Condition: ready for operation (used), Kölsch / Beichle Uni1-Uni4 / Universal milling machine - Universal rotary table - Coordinated milling paths X / Y / Z - Suitable for general milling operations and partial and full circular milling - Additional three-jaw chuck Dimensions: L x W x H 1.7 x 1 x 1.9 meters / Weight 950 kg Bedpfxoz Eyyio Aknodi Errors and omissions excepted.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10621 Manufacturer: PAMA Type: Speedmat 3/TR16 Year of construction: 2008 Type of control: CNC-Steuerung Bdjdpfs Ahkxvjx Aknei Control: SIEMENS SINUMERIK 840 D PL Storage location: Halberstadt Country of origin: Italy X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 2200 mm W-Axis: 800 mm Bore Spindle Diameter: 160 mm Table Load: 12000 kg Tool Taper: ISO 50 BIG PLUS Turning Speeds: 3500 RPM Max. Torque: 2.765 Nm Rapid Travel X/Y/Z: 25000 mm / min Drive Capacity - Spindle Motor: 46 kW Internal cooling: 15 / 45 bar External cooling: 50 / 4 bar Table surface: 1600 x 2000 mm Spindle speed gear stage 1: 2.120 1 / min Spindle speed gear stage 2: 2.765 1 / min Further information: Automatic tool changer SK50 DIN 69871, 80 positions. Automatic angle milling head TS 35 with 360 positions, speed 2,000 rpm and torque 2,000 Nm. Automatic universal milling head TU25C (2-axis), speed 3,000 rpm and torque 800 Nm. Automatic accessory changer, 2+1 units. Touch probe (Renishaw). The machine can be inspected under power.

Condition: used, Year of construction: 2004, Tornos MultiDeco 20/8 Number of spindles: 8 Maximum bar diameter: 20 mm Spindle speed: 5000 rpm Main spindle power: 15 kW / 18.5 kW Maximum part length: 100 mm without backworking; 75 - 80 mm with backworking Number of backworking spindles: 1 Backworking spindle axial travel: 160 mm Backworking spindle motor power: 1.1 kW CNC control unit: Fanuc Programming system: TB-DECO software platform Bdedpfx Akszy Spusnsi IEMCA integrated automatic bar feeder High-pressure coolant pump and fine filtration system Automatic chip conveyor The machine is in working condition and can be inspected upon request.

Condition: good (used), Year of construction: 2014, Knuth Sinus 330 x 1500 Bdsdpfx Asz Irwfsknsi Knuth Sinus 330 x 1500 lathe, manufactured in 2014, in very good original condition. The machine comes from a special production run by a renowned German machine tool company. CE compliant!! Technical data: Year of manufacture: 2014 Knuth Sinus 330 x 1500 Working area: Workpiece length: 1,500 mm Turning diameter over bed: 660 mm Turning diameter over cross slide: 440 mm Turning diameter without bridge: 900 mm Bridge length: 320 mm Bed width: 400 mm Travel distances: Travel X-axis: 368 mm Travel Z1-axis: 230 mm Swivel range of top slide: 45° Main spindle: Spindle speed: 25 rpm - 1,600 rpm Spindle bore: 105 mm Spindle mounting: D1-8 Spindle taper: ø 113 mm / 1:20 Rapid traverse: Rapid traverse X-axis: 2,000 mm/min Rapid traverse Z-axis: 4,000 mm/min Tailstock: Tailstock spindle diameter: 90 mm Tailstock taper: 5 MK Tailstock quill stroke: 235 mm Tailstock cross slide: ± 12.5 mm Drive power: Motor power, main drive: 7.5 kW Dimensions and weights: Dimensions (L x W x H): 3.21 m x 1.23 m x 1.6 m Weight: 2,800 kg About the machine: The Sinus D is the largest series in the universal lathe segment. Conventional lathes like this are characterized by their robust design and high versatility. The design follows a classic design, but is based on a heavy, one-piece cast machine bed. As with heavy-duty lathes, the power transmission between motor and spindle is also achieved here via a manual lamellar clutch. With integrated functions such as the removable bed bridge, rapid traverse, and a taper turning device, this series offers optional solutions for machining long workpieces or large flanges. One-piece heavy cast bed with high stability Massive headstock with large spindle bearings Rapid traverse in 2 axes for fast positioning Taper turning attachment for additional applications Well-designed safety features You can find more lathes from well-known manufacturers on our website.

Condition: good (used), Year of construction: 2006, Number of working spindles: 6 pieces Bar spindle diameter capacity: 32 mm Working spindle maximum speed: 6000 rpm Spindle chuck diameter: 40 mm Maximum number of tool carriers: 12 pieces Tool carrier travel distances: X = 72 mm, Z = 100 mm Part catcher receiver available in 6.1 position KNOLL chip conveyor In-machine air intake filtration system available (ventilation) Bedpfsrqzzpex Aknodi Weight: 7,200 kg Magazine: IEMCA 3300 mm capacity bar feeder