Condition: good (used), Year of construction: 2021, operating hours: 2,109 h, Functionality: limited functionality, 160t clamp tonnage, 35mm main barrel with 150ccm shot volume, 15mm secondary barrel with 15ccm shot volume, 16 hot runner zones, 4+4 shut off nozzle valves, servo driven swivel unit on moving half. Comes with Eunil Magazine Loader and Viper 12-RC300 robot Notes - 1. Two machines available for sale Dsb Eyevmulis Hkbskl 2. Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Year of construction: 2006, Condition: ready for operation (used), Additional Equipment Dkjb Eyjwiad Ij Hkbsl Robot: Yes This Arburg Allrounder 1200T 800-150 was manufactured in 2006. A vertical injection moulding machine, it offers robust functionality for specialized plastic processing tasks. Consider the opportunity to buy this Arburg Allrounder 1200T 800-150 vertical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 2005, Model: EL-EXIS S 100/420-310 DEMAG ERGOTECH- EL-EXIS E 1000/420-310 (130) Year of production: 2005 Controll: NC4 TECHNICAL DATA Screw Dia [mm]: 35 Shot Weight [g]: 150 Injection Pressure [bar]: 1865 Clamping Force [kN]: 1000 Dkeb Eetrzuqey Hkbsl Tie Bar Distance [mm]: 420 x 420 Platen Size [mm]: 600 x 600 Mould Height min. [mm]: 200 Machine tested

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, This Dr Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 2007 and has relatively few working hours for its age. - Brand: Dr Boy - Model: 55M - Year of construction: 2007 - Screw diameter: 32mm - Shot volume: 96.5 cm³ - Clamping force: 55T Dksbotpf N Uj Ey Hkbsl - Working hours: 24,210

Condition: excellent (used), Year of construction: 1999, Clamping force: 250 ton Screw diameter: 60 mm Metering stroke: 260 mm Screw speed: 228 rpm Opening stroke: 850 mm Ejector force: 82 kN Ejector stroke: 200 mm Max. platen clearance: 1,200 mm Djb Ey Hswhx T Ejkbokl Minimum mold height: 350 mm Mold clamping platens: 1,050 x 650 mm (enlarged: 1,050 x 900 mm) Pump drive power: 37 kW Weight: 20,000 kg

Condition: used, Year of construction: 2016, operating hours: 63,000 h, clamping force: 750 kN, screw diameter: 90 mm, displacement volume: 2,863 cm³, injection pressure: 1,780 bar, overall weight: 30,000 kg, Freight basis: ex-site Delivery time: by arrangement Djb Ey Hkewhrfbobjkl Payment terms: 100% before taking delivery of the machine, net

Condition: good (used), Year of construction: 2003, operating hours: 48,000 h, Functionality: fully functional, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 182 cm³, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 650 mm, plate width: 650 mm, total length: 4,470 mm, total width: 1,670 mm, total height: 2,180 mm, overall weight: 4,410 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 750 mm, Equipment: documentation/manual, injection moulding machine ARBURG Allrounder 470 C 1500-350 warehouse no.: 503292 manufacturer: ARBURG type: Allrounder 470 C 1500-350 controller: Selogica year of construction: 2003 operation hours: 48000 h technical data clamping unit clamping force: 1500 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 650 x 650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm ejector stroke: 225 mm ejector force: 66 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm technical data injection unit screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2120 bar screw length: 20 l/d screw stroke: 145 mm nozzle stroke: 400 mm measures & weight measures of machine l x w x h: 4.47m x 1.67m x 2.18m total weight: 4410KG Dkob Eysvbgtns Hkbjl equipment included screen text german core pulling hydraulically 2x machine without material hopper Anti vibration mounts mould heating 6x

Year of construction: 2016, Condition: ready for operation (used), This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information. Dobswiaf Ss Ey Hkbjkl Application Types Injection Moulding

Condition: used, Year of construction: 2002, Clamping force: 650 t Screw diameter: 80 mm Dkjb Ey Hkewhx Nyobol Shot weight: 1764 g Shot volume: 1960 cm3 Mold height: 550 mm Injection pressure: 2030 bar Type: Horizontal Drive: Hydraulic

Condition: good (used), Year of construction: 2006, Demag Ergotech Extra 200-600 plastic injection molding machine Plastic injection Plastic Type: Extra 200-600 Model: 2006 Djb Ey Hksvcm S Tsbekl The machine is in a well-kept original condition. The complete detailed documentation is available. Viewing can take place at short notice. For further questions please do not hesitate to contact us. Price, ex stock here plus VAT. Condition: good - ready for demonstration Delivery: ex stock - as viewed Payment: strictly net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Further machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: excellent (used), Year of construction: 2012, operating hours: 40,226 h, Functionality: fully functional, machine/vehicle number: 221240, clamping force: 700 kN, screw diameter: 40 mm, clearance between the columns: 370 mm, displacement volume: 188 cm³, injection pressure: 1,530 bar, injection weight: 172 g, Equipment: documentation/manual, As an injection molding machine dealer, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines, models from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 370S 700-290 with vertical injection equipment Serial number: 221240 Year of manufacture: 2012 Operating hours: 40,226 h Control system: Selogica Dimensions (L/W/H): 3.92 x 1.45 x 2.02 m Weight: 3,300 kg Fully functional Condition very well maintained Extras Device for vertical injection 1 core pull circuit Additional heating band connection 5 free, manually controlled cooling circuits Air valve connection controlled via Selogica Equipment packages: Quality assurance, documentation, advanced monitoring, production control, etc. Flexible part chute. - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) German language - From first owner - Made in Germany Constant maintenance by the manufacturer and previous owner Injection unit Screw diameter 40 mm Injection weight 172 g/hp Injection pressure 1530 bar Injection volume 188 cc Clamping unit Clamping force 70 t/700 kN Tiebar spacing 370 x 370 mm Dobowg Tt Rj Ey Hkbokl Clamping platens 510 x 510 mm Mold height 200 mm Maximum spacing between platens 600 mm Ejector stroke/force 125 mm/30 kN Hydraulic clamping unit Motor power 15 KW Heating power 7.7 KW - 5 zones Total power 23 KW Warranty Warranty until the first Commissioning Loading/Shipping Free loading onto the buyer's truck or free delivery against freight reimbursement Available from our Hanover/Germany warehouse More pictures to follow Information about the machines we offer and our company - We only sell our own machines purchased from ongoing production from our Hanover warehouse - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - We are NOT an agent dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course - All machines offered can be viewed in our warehouse

Condition: ready for operation (used), Year of construction: 2014, operating hours: 38,567 h, Clamping Unit Clamping force 180 tons Additional Equipment Machine including Robot + Safety Cage (without conveyor belt) This Engel Victory 200H/60W/180 combi + Viper 40 was manufactured in 2014. It's a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this Engel Victory 200H/60W/180 combi + Viper 40 hydraulic injection moulding machine. Contact us for more information. Application Types Djb Ey Hkswiahajbjkl Injection Moulding

Condition: ready for operation (used), Year of construction: 2013, Injection Unit Screw diameter 35 mm, 40 mm, 45 mm Injection pressure 1703 bar, 1297 bar, 1030 bar Screw speed 400 r/min, 320 r/min (current) Nozzle pressure 51.9 kN Clamping Unit Clamping force 800 kN Opening stroke 458 mm Dkebswiaffs Ey Hkbsl Ejector stroke 100 mm Ejector force for / back 39.8 kN This Engel Insert 200V/60 rotary was manufactured in 2013. A vertical injection moulding machine, it represents a reliable option for precision moulding tasks. Consider the opportunity to buy this Engel Insert 200V/60 rotary vertical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, operating hours: 84,224 h, Clamping Unit Dkjb Ey Hewiag Aokbjl Clamping force 250 tons Opening stroke 820 mm Ejector stroke 200 mm Additional Equipment Core Pullers: Ejector Side: 2x (on the moving clamping plate) Connector - Core Pull Feedback (Ejector Side): Yes (counter-operating side) Connector - Ejector Plate Safety: Yes (counter-operating side) Tool Needle Shut-Off: Yes (single pneumatic or hydraulic) This Krauss Maffei 250-1900 C2 was manufactured in 2004. A robust hydraulic injection moulding machine, it features a clamping force of 250 tons and a maximum opening stroke of 820 mm. The tie bar spacing is 630 mm both horizontally and vertically. With over 84,224 operating hours, this machine has proven reliability and performance. If you are looking to get high-quality moulding capabilities, consider the Krauss Maffei 250-1900 C2 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Year of construction: 2004, Condition: ready for operation (used), General Data Machine weight 10500 Control Unit Brand ENGEL Model n/a This 3-axis Engel Elast 1500/250V was manufactured in 2004. It's a vertical injection moulding machine designed for precision and efficiency in plastic processing. Consider the opportunity to buy this Engel Elast 1500/250V vertical injection moulding machine. Contact us for more information. Application Types Injection Moulding Dksb Eewiadzoy Hkbsl

Year of construction: 2016, operating hours: 24,000 h, Condition: ready for operation (used), This Arburg Allrounder 920S 4600-2100 was manufactured in 2016. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this Arburg Allrounder 920S 4600-2100 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Djb Ejwhr E Isy Hkbjkl

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,674 h, Control Unit Model CC300 microcomputer Brand ENGEL Injection Unit Dkjb Eyewhr I No Hkbel Screw diameter 45mm Clamping Unit Clamping force 500 tons Additional Equipment Tool heating: 32 control circuits, max. heating output 60 kW Vacuum compressed air circuits: With Venturi nozzle and pressure switch Solenoid air valves: 2/2-way, R1/2 inch Autoprotect injection monitoring: Self-learning system for mold protection Advanced material package: For thermoplastics up to 350°C, max. reinforcement level 30% This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5" full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2015, operating hours: 25,000 h, Clamping Unit Clamping force 550 This Arburg Allrounder 920S 5000-3200 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine. Contact us for more information. Djb Eowhgqrey Hkbokl Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2015, operating hours: 22,050 h, Clamping Unit Clamping force 800 Additional Equipment Robot Conveyor belt Dsbswhgq Ej Ey Hkbskl This SUMITOMO SHI DEMAG Systec 800/1120-6400 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec 800/1120-6400 hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2003, Control Unit Brand NETSTAL Injection Unit Injection pressure 279 kN Clamping Unit Clamping force 1500 kN Opening stroke 0-450 mm Mould height min 400 mm Mould height max 700 mm Additional Equipment Equipment: PLastification D 45-22D LP A / Mould heaters: 4 x 3.3 KW/ 32 x 0.75 KW / Robot interface 12+ / Paint conveyor interface Europe interface 15 1-1 / 4 air valves 890L / 1 core puller Hydr Cooling water in the outlet opening and 2 distributors on each of 8 cooling circuits The machine was partially overhauled in 2018 This Netstal SynErgy 1500-460 Injection moulding machine was manufactured in the year 2003 in Switzerland. It is controlled by a Netstal control unit. The machine has a clamping force of 1500 kN. Dkeb Ey Hkjwhgqfebjl Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 1998, Injection Unit Screw diameter 50 mm Clamping Unit Clamping force 5000 KN Additional Equipment Removal Handling + Conveyor Belt: WITTMANN Material Conveyor: MOTAN Metal Separator: S+S This DEMAG Ergotech 5000-1450 was manufactured in 1998. It's a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech 5000-1450 hydraulic injection moulding machine. Contact us for more information. Dob Ey Hewhgttokbjkl Application Types Injection Moulding

Year of construction: 2006, Condition: ready for operation (used), This Arburg 320 C 500-100 was manufactured in 2006. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg 320 C 500-100 hydraulic injection moulding machine. Contact us for more information. Deb Eewhgrcjy Hkbjkl Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2001, Control Unit Model Ergo control Injection Unit Screw diameter 70 mm Clamping Unit Clamping force 5000 KN Opening stroke 810 mm Additional Equipment Dkjb Ey Hswhgtmokbsl Removal handling + conveyor belt WITTMANN Material conveyor MOTAN Metal separator S+S This DEMAG Ergotech 5000-2300 was manufactured in 2001. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech 5000-2300 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2010, General Data Machine weight 2500 kg Control Unit Brand KRAUSS MAFFEI Injection Unit Screw diameter 50 mm Clamping Unit Clamping force 200 N This Krauss Maffei 200-750 CX was manufactured in 2010. A hydraulic injection moulding machine, it represents a solid choice for your production needs. Consider the opportunity to buy this Krauss Maffei 200-750 CX hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Dksbjwg Iafe Ey Hkbsl

Condition: ready for operation (used), Year of construction: 2017, operating hours: 16,793 h, General Data Machine weight 6700 kg Control Unit Brand KRAUSS MAFFEI Clamping Unit Clamping force 420 Additional Equipment Includes a Kuka Robot KR 30-3 Djb Ey Hswg H U Iekbokl This Krauss Maffei 420-2000 CX was manufactured in 2017, designed for precision in hydraulic injection moulding. Ideal for complex production needs, it offers robust performance and reliability. Consider the opportunity to buy this Krauss Maffei 420-2000 CX hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding