Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 133404-100, clamping force: 3,000 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, injection weight: 600 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar spacing (H x W): 710 x 610 mm Minimum mould height: 375 mm Maximum mould height: 375 mm Maximum opening stroke: 1,150 mm Injection Unit Screw diameter: 55 mm Shot volume: 653 cm³ Shot weight: 600 g Injection pressure: 2,040 bar MACHINE DETAILS Godpfex A Df Tsx Ag Douk Weight: 12,200 kg

Condition: ready for operation (used), functionality: fully functional, clamping force: 800 kN, clearance between the columns: 1,200 mm, ARBURG 1200 T 800-150 MACHINE DETAILS Operating Hours Machine Cycles: 2,426,431 Pump Operating Hours: 38,226 h Automatic Operation Hours: 30,517 h Gsdpfxjx Af S Uo Ag Deuk FTP ATR-25 Q MACHINE DETAILS Weight: 1,400 kg Note: Further information regarding the machine configuration can be found in the attached document.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 3,188 kN, injection weight: 6,935 g, screw conveyor diameter: 130 mm, production capacity: 17,000 unit/h, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 320 t Shot weight: 6,935 g Screw diameter: 130 mm Performance: 17,000 preforms/h MACHINE DETAILS Configuration: 72-cavity, 4-stage EQUIPMENT Gjdsx A Efhspfx Ag Dsuk Take-out unit Conveyor belt LT/h 1825 TPS robot TRT-M4-72-E

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 130 mm, displacement volume: 6,172 cm³, injection pressure: 1.296 bar, plate width: 1,700 mm, plate height: 1,704 mm, TECHNICAL DETAILS Clamping force: 6,500 kN Tool opening force, max.: 346 kN Gjdpfx Agex Dbtwe Dsuk Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate (h x v): 1,704 x 1,700 mm Clear width (h x v): 930 x 930 mm Tool opening stroke: 1,150 mm Tool installation height, min.: 600 mm Opening width: 1,750 mm Ejector stroke: 250 mm Ejector force forward/backward: 226 kN Injection unit Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Displacement: 6,172 cc Shot weight (PS): 5,617 g Injection flow: 1,540 cc/s Screw speed: 138 rpm Plasticizing flow: 238 g/s Nozzle contact force: 246 kN Electrohydraulic equipment Nominal pump motor power: 132 kW Installed heating power: 70 kW Cylinder heating control zones: 7 MACHINE DETAILS Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg EQUIPMENT - Oscillating elements - 1 x air valve - 2 x hydraulic core pull on BFAP - 2 x hydraulic core pull on FFAP - 8 x hot runner control points - Robot interface according to Euromap 67

Year of construction: 2017, condition: ready for operation (used), Additional Equipment Gjdpjx D Scvsfx Ag Dsuk Mold temperature control Automatic activation lamp Automatic last rotating Automatic mold slider closing Measurement & quality control tools This Kloeckner Desma PU D522/12-LDI was manufactured in 2017. Designed for PU injection and shoe production, featuring a 12-station setup with a clamping force of 70 kN. It includes a reaction injection molding unit, automatic mold slider, and motor capacity of 23.16 kW. Heating capacity stands at 45.50 kW. Contact us for more information about this machine. Application Types Injection Moulding

Condition: like new (used), Year of construction: 2017, Machine: ENGEL VICTORY 500T / 7050 (Year 2017) Year of manufacture: 2017 Control unit: CC300 Operating hours: 565 h Availability: Immediate Clamping Unit: Clamping force: 500 tons Opening stroke: 1100 mm Distance between tie bars: 1500 × 1285 mm Platen size: 1500 × 1285 mm Minimum mould height: 500 mm Maximum daylight (open distance): 1600 mm Injection Unit: Screw diameter: 120 mm Screw length (L/D): 22 D Injection volume: 5430 cm³ Maximum injection pressure: 1600 bar General Data: Motor power: 98 kW Heating power: 30 kW Clamping unit weight: 31 tons Injection unit weight: 15 tons Machine dimensions (L × W × H): 10.50 m × 2.30 m × 2.30 m Options: Core pullers: 3 Robot interface: No Guedpfx Aoxvingsg Dek Bi-metallic screw/barrel: Yes Other equipment: STAUBLI magnetic platens, 24 hot runner heating zones Note: The machine has very low operating hours (565 h) and belongs to the modern ENGEL Victory tie-bar-less series, ideal for large moulds and high-precision production.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 112,163 h, functionality: fully functional, clamping force: 2,700 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, ejector stroke: 200 mm, TECHNICAL DETAILS Clamping unit Clamping force: 2,700 kN Platen size (H x W): 1,030 x 1,020 mm Tie bar spacing (H x W): 710 x 630 mm Min./max. mould height: 350 mm Max. opening stroke: 1,150 mm Locating ring diameter: 160 mm Ejector stroke: 200 mm Injection unit Screw diameter: 55 mm Shot volume: 650 cm³ Shot weight: 565 g Injection pressure: 2,040 bar Max. injection speed: 144 mm/s Gusdpfx Aox A Dbbeg Djk MACHINE DETAILS Operating hours: 112,163 h EQUIPMENT Pneumatic valve Core pulls (3 pcs.)

Condition: used, Year of construction: 2004, This Sumitomo DEMAG injection moulding machine "Ergotech concept 200/560-840" is being offered in our online industrial auction / machinery auction for warehouse clearance of injection moulding machines. You can find this and many other listings on our platform. Gusdpfxsx Hvt He Ag Dsk

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 184686, clamping force: 1,000 kN, screw diameter: 25 mm, clearance between the columns: 420 mm, displacement volume: 54 cm³, injection weight: 45 g, For sale is an injection moulding machine from the brand Arburg, model 420 C 1000-150/60. The machine is in excellent technical condition and has been very well maintained. The machine is offered without peripherals. The rotary table, material feed, temperature control units, and other accessories are not included. Technical data: Year of manufacture: 2001 Clamping force: Clearance between tie bars: 420 x 420 mm Opening stroke: 500 mm Mould installation height: 250 mm Mould mounting plate: 570 x 570 mm Ejector stroke: 175 mm Screw diameter: 25 mm Theoretical shot volume: 54 cm³ Shot weight: 45 g/PS Transport and loading can be organised on request, at an additional cost, Europe-wide. Gujdpfx Ajx E U Eleg Dsk All prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 70 mm, displacement volume: 1,155 cm³, injection pressure: 1,482 bar, ejector stroke: 250 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 4,000 kN Mounting platen (h x v): 1,400 x 1,080 mm Minimum mold height: 350 mm Opening stroke: 950 mm Ejector stroke: 250 mm Ejector force (forward): 83 kN Injection Unit Screw diameter: 70 mm Injection pressure: 1,482 bar Shot volume: 1,155 cm³ Shot weight (PS): 1,040 g Injection flow: 419 cm³/s Screw speed: 183 rpm Nozzle contact force: 110 kN MACHINE DETAILS Gujdox Dbp Sspfx Ag Djk Dimensions & Weight Space requirement approx.: 8.30 x 2.35 x 2.48 m Total weight: 31,200 kg Rated power pump motor: 45 kW EQUIPMENT Oscillating elements 2 x 24-way water manifold Material hopper Degassing screw Robot interface 4 x hydraulic core pulls

Year of construction: 2016, condition: ready for operation (used), General Data Machine weight 9500 kg This Engel Insert 90 was manufactured in 2016. A vertical injection moulding machine with a total run time of only 54 hours and a weight of 9,500 KG. Consider the opportunity to buy this Engel Insert 90 vertical injection moulding machine. Contact us for more information. Application Types Injection Moulding Gedpfxex D Hp Rj Ag Douk

Year of construction: 2015, condition: excellent (used), Moretto XD20 (2015) Dehumidifier XD20 Godpfjx E Ur Eox Ag Djuk Dryer OTX60VP

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 134022-100, clamping force: 3,000 kN, screw diameter: 60 mm, injection pressure: 2,040 bar, injection weight: 840 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar distance (H x W): 710 x 630 mm Minimum/maximum mold height: 375 mm Maximum opening stroke: 1,175 mm Injection Unit Screw diameter: 60 mm Shot volume: 913 cm³ Shot weight: 840 g Injection pressure: 2,040 bar MACHINE DETAILS Net weight with control cabinet: 12.2 t Godpfxsx A A S Ej Ag Dsuk EQUIPMENT The machine can be inspected and tested under power. Additional photos and videos available upon request. Loading and transport can be arranged.

Condition: used, Year of construction: 2005, This Sumitomo DEMAG injection moulding machine "System 200/560-320" is being offered for online auction as part of our industrial auction / warehouse clearance for injection moulding machines. Gsdsx Hvttspfx Ag Douk

Condition: used, Year of construction: 2010, clamping force: 320 kN, displacement volume: 891 cm³, injection pressure: 2,420 bar, overall weight: 17,300 kg, load hours: 47,000 h, screw conveyor diameter: 60 mm, terms of delivery: EXW (ex Works) Gedpjx E A Twefx Ag Douk delivery time: on request terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 2010, operating hours: 72,154 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 25 mm, warehouse no.: 503576 manufacturer: ARBURG type: Allrounder 900 T 800-150 controller: year of construction: 2010 operation hours: 72154 h clamping force: 800 kN Gjdpfxjx Eyz Eo Ag Djuk distance between tie-bars h x v: 900 x 900 mm min. mould height: 250 mm max. open daylight: 550 mm opening stroke: 300 mm round table diameter: 900 mm screw diameter: 25 mm swept volume: 54 ccm injection pressure: 2500 bar equipment included: screen text german air valve 1x machine with rotary index table machine incl. water flow regulator Anti vibration mounts Operation Data Acquisition measures of machine l x w x h: 3.8m x 1.85m x 2.15m total weight: 5000KG

Year of construction: 2017, condition: excellent (used), Tool temp TT-142N/ MP-988 (2017) TOOL-TEMP TT-142 N – Full Equipment & Technical Specification (English) Application: Model N – water up to 140°C Pump with axial mechanical seal Robust high-performance pressurized water temperature control unit Heating capacity: 12 kW Standard Equipment: 1. Temperature controller with self-optimization and digital display of set and actual temperature (°C/°F selectable) 2. Automatic temperature monitoring; alarm on deviation 3. Pump pressure gauge and system pressure gauge 4. Pressure reduction, venting, automatic water filling 5. Scale-resistant heat exchanger 6. Standard pump with axial mechanical seal 7. All water-contact components made from stainless steel or bronze 8. Heating elements switchable in stages 9. Safety features: automatic level control preventing dry running; mechanical safety thermostat; electronic maximum temperature limiter; main switch; isolation transformer; overload relay for pump protection; acoustic alarm 10. Visual fault indication 11. Unit on castor wheels Special Features: 1. Digital flow indicator with minimum-flow monitoring 2. Optional MP-988 controller with digital interface Technical Data: Temperature range: water up to 140°C Temperature regulation: microprocessor-controlled controller MP-888 with self- optimization; digital display of set and actual temperature; automatic Gsdex E Uqbspfx Ag Deuk temperature monitoring Flow monitoring: electronic, digital display, automatic minimum-flow alarm Heating capacity: 12 kW (6/6 kW switching stages) Cooling capacity: indirect approx. 60 kW at 140°C Pump performance: motor 1.8 kW; pressure mode max. 5 bar / 110 l/min; suction mode vacuum up to 8 m water column; no booster pump External temperature measurement: no Pressure reduction: yes Leak-stop / mold emptying: no Filling: automatic Connections: Medium: ¾” BSP female Cooling water: ⅜” BSP male (inlet with filter), ⅜” BSP female (outlet) Dimensions and weight: 870 × 360 × 915 mm (incl. wheels) Approx. 107 kg empty Color: zinc grey RAL 7001 Electrical versions: Available for all voltages from 3×200 V to 3×600 V, 50/60 Hz UL/CSA compliant For US market: NPT connections, controller display in °F Electronic Controllers: MP-888 (standard): °C/°F display; analog interfaces 0–5 V, 0–10 V, 4–20 mA; high-precision control via self-optimization; flow indication in l/min or gal/min; minimum-flow alarm MP-988 (optional): digital interfaces RS-485, RS-232, 20 mA loop, CAN-bus, Profibus; supports common communication protocols; temperature difference monitoring; display of up to three temperatures

Condition: ready for operation (used), Year of construction: 2014, operating hours: 47,000 h, functionality: fully functional, machine/vehicle number: 135541-100, clamping force: 3,500 kN, screw diameter: 65 mm, injection pressure: 2,070 bar, ejector stroke: 200 mm, controller model: B6P, TECHNICAL DETAILS Clamping Unit Clamping force: 3,500 kN Platen size (H × W): 1,030 × 1,140 mm Tie bar spacing (H × W): 710 × 710 mm Min. / Max. mould height: 300 / 710 mm Max. opening stroke: 1,380 mm Centring ring diameter: 160 mm Ejector stroke: 200 mm Injection Unit Screw diameter: 65 mm Shot volume: 1,171 cm³ Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Max. injection speed: 600 mm/s MACHINE DETAILS Gsdpfex A A E Ejx Ag Dsuk Control: B6P Operating hours: 47,000 h EQUIPMENT 4 pneumatic valves 1 core puller

Condition: used, Year of construction: 2017, clamping force: 550 kN, displacement volume: 1,239 cm³, injection pressure: 1,990 bar, overall weight: 21,000 kg, load hours: 21,636 h, screw conveyor diameter: 70 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Gjdpfox E A Tqex Ag Deuk

Condition: good (used), Year of construction: 2007, operating hours: 47,791 h, functionality: fully functional, clamping force: 900 kN, warehouse no.: 503504 manufacturer: ENGEL type: VICTORY 330H-80V-90 combi controller: CC200 year of construction: 2007 operation hours: 47791 h The rotary unit is 6-way R3/8 inch for a maximum of 3 media circuits, medium max. 120 degrees C with 2 water circuits and 1 hydraulic circuit: 2W1H. The 2nd vertical injection unit 80V is equipped with a 22 mm plastification. The injection volume is 38 ccm with 1590 bar injection pressure. clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 243 mm max. open daylight: 743 mm opening stroke: 500 mm round table diameter: 700 mm horizontal injection unit screw diameter: 35 mm swept volume: 154 ccm injection pressure: 1600 bar vertical injection unit screw diameter: 22 mm swept volume: 38 ccm injection pressure: 1590 bar Gjdpfex Eyy Ujx Ag Deuk equipment included screen text german screen text english core pulling hydraulically 1x machine with rotary index table machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for ejector plates safety Schuko-socket 10A mould heating 8x Injection moulding machine for two components measures of machine l x w x h: 4.5m x 1.45m x 2.7m total weight: 9300KG

Condition: ready for operation (used), Year of construction: 2014, operating hours: 49,462 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 65 mm, injection pressure: 2,070 bar, ejector stroke: 200 mm, controller model: B6P, The toggle lever mechanism has been completely overhauled! TECHNICAL DETAILS Clamping Unit Clamping force: 3,500 kN Platen dimensions (H x W): 1,030 x 1,140 mm Tie bar spacing (H x W): 710 x 710 mm Minimum mould height: 300 mm Maximum mould height: 710 mm Maximum opening stroke: 1,380 mm Centerring diameter: 160 mm Ejector stroke: 200 mm Injection Unit Screw diameter: 65 mm Shot volume: 1,171 cm³ Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Maximum injection speed: 600 mm/s MACHINE DETAILS Control system: B6P Operating hours: 49,462 h Gedpjx A A Akefx Ag Douk EQUIPMENT Pneumatic valves: 4 units Cores: 2 units Toggle lever mechanism completely overhauled

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X66609, clamping force: 6,600 kN, screw diameter: 84 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, TECHNICAL DETAILS Clamping unit Clamping force: 6,600 kN Platen size (H x W): 1,370 x 1,370 mm Tie bar spacing (H x W): 900 x 900 mm Minimum/maximum mold height: 300 - 900 mm Maximum opening stroke: 1,840 mm Centering ring diameter: 200 mm Ejector stroke: 300 mm Injection unit Screw diameter: 84 mm Shot volume: 2,575 cm³ Guedpfxjx A Awzo Ag Djk Shot weight (PS): 2,369 g Injection pressure: 1,650 bar Maximum injection speed: 500 mm/s MACHINE DETAILS Control system: CDS700 Clamping unit weight: 25,400 kg Injection unit weight: 7,000 kg EQUIPMENT Pneumatic valves (6 pcs.) Core pull (1 pcs.)

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: X88628, clamping force: 6,600 kN, screw diameter: 84 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, The cylinder, screw, and screw tip of the injection system were replaced a year ago! TECHNICAL DETAILS Clamping Unit Clamping force: 6,600 kN Platen size (H x W): 1,370 x 1,370 mm Tie bar spacing (H x W): 900 x 900 mm Minimum mold height: 400 mm Maximum mold height: 1,125 mm Maximum opening stroke: 2,065 mm Centering ring diameter: 200 mm Ejector stroke: 300 mm Guedpfex A Avqex Ag Dok Injection Unit Screw diameter: 84 mm Injection volume: 2,575 cm³ Shot weight (PS): 2,369 g Injection pressure: 1,650 bar Maximum injection speed: 500 mm/s MACHINE DETAILS Control system: CDS700 Weight of clamping unit: 29,300 kg Weight of injection unit: 7,700 kg EQUIPMENT Pneumatic valves (4 pcs) Cores: (1 pc)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X81559, clamping force: 9,000 kN, screw diameter: 115 mm, injection pressure: 1,740 bar, ejector stroke: 300 mm, controller model: CDS700, TECHNICAL DETAILS Clamping Unit Clamping force: 9,000 kN Platen size (H x W): 1,570 x 1,560 mm Tie bar spacing (H x W): 1,010 x 1,010 mm Min. mold height: 300 mm Max. mold height: 1,190 mm Max. opening stroke: 2,290 mm Centerring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 115 mm Shot volume: 6,232 cm³ Shot weight (PS): 5,733 g Injection pressure: 1,740 bar Max. injection speed: 300 mm/s MACHINE DETAILS Guedpfx Agex A At Ns Djk Control system: CDS700 Weight of clamping unit: 44,500 kg Weight of injection unit: 20,000 kg EQUIPMENT Pneumatic valves (6 pcs.) Core pulls (1 pc.)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: X81456, clamping force: 9,000 kN, screw diameter: 98 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, Injection molding machine including Sytrama robot! TECHNICAL DETAILS Clamping Unit Clamping force: 9,000 kN Platen size (H × W): 1,570 × 1,560 mm Tie bar spacing (H × W): 1,010 × 1,010 mm Min. mold height: 300 mm Max. mold height: 1,190 mm Max. daylight: 2,290 mm Locating ring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 98 mm Shot volume: 4,010 cm³ Godpfxox A Ar Ee Ag Dsuk Shot weight (PS): 3,690 g Injection pressure: 1,650 bar Max. injection speed: 400 mm/s MACHINE DETAILS Control system: CDS700 Clamping unit weight: 44,500 kg Injection unit weight: 12,500 kg EQUIPMENT Pneumatic valves: 4 units Core pulls: 1 fixed / 1 movable Sytrama 101 GL robot