Condition: used, Year of construction: 2018, Serial No. 221920, Control system: Engel, Type CC300, Clamping force: 800 t, 2 injection units, rotary table, minimum/maximum mold height: 500 - 1,100 mm, platen spacing: 2,100 mm, clear opening horizontal/vertical: 1,170 / 1,000 mm, 8 cascades, 48 hot runner zones, core pulls hydraulic: 2 (moving platen) / 4 (fixed platen), screw diameter: 80 / 60 mm, shot weight: 1,800 / 250 g, operating hours: 28,236, machine weight: 30,000 kg, mold temperature control unit: Oni, Type Rhytemper FlexControl 30, 3x 8-circuit block modules at 125 °C, 6-circuit block module at 125 °C, visualization unit, handling system: Engel, Type Viper 20 (X, Y, Z, B axes), nozzle distance: 300 mm, year of manufacture: 2018, Serial No. 221937, parts enclosure with conveyor belt: Engel, Type BGR FB100 KMAT, year of manufacture: 2018, 2102958, length/width approx. 3,500 x 800 mm, external temperature control unit and material dosing not included in the scope of supply. Iodoy I R Inepfx Abxotg

Condition: used, Year of construction: 2018, Ser. No. 221903, Control system, Manufacturer: Engel, Type: CC300, Clamping force: 400 t, Installation height: 450 - 950 mm, Plate distance: 1,450 mm, 8 cascades, 24 hot runner zones, hydraulic core pulls: 2 (DS) / 4 (AS), screw diameter: 60 mm, shot weight: 750 g, operating hours: 30,738, machine weight: 24,100 kg, mold temperature control, Manufacturer: Oni, Type: Rhytemper FlexControl 8, 2x 4-fold block modules 125 °C, visualization unit, extraction handling unit, Manufacturer: Engel, Type: Viper 20 EP8, 5 axes (X,Y,Z,C,B axis), nozzle distance not applicable for single-component, Year: 2018, Ser. No. 221917, part enclosure, belt discharge conveyor, Manufacturer: Engel, Type: FL4600 B600HLI, Year: 2018, Ser. No. 2101471, external temperature control unit and material dosing not included in this position. Itedpfxsy I Rxmj Abxeg

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 44731, clamping force: 500 kN, screw diameter: 25 mm, clearance between the columns: 320 mm, injection weight: 47 g, mold height (min.): 200 mm, opening stroke: 550 mm, total length: 4,000 mm, total width: 1,163 mm, total height: 1,787 mm, overall weight: 2,300 kg, input frequency: 50 Hz, input voltage: 400 V, input current: 58 A, Please refer to the photos and video for the condition and contents of the offer. The equipment is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. A net invoice can be issued for foreign customers, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our website to view our additional offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the article description may occur and are reserved. Isdpfx Aox Srggjbxstg

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 7143-1001, clamping force: 500 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection pressure: 1,995 bar, injection weight: 94 g, opening stroke: 400 mm, installation height: 210 mm, total length: 4,000 mm, total width: 1,400 mm, total height: 2,100 mm, overall weight: 3,400 kg, pump power: 15 W, Please refer to the photos and video for the condition and contents of the offer. The equipment is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. Iedpfxsx Spw Ao Abxetg You will receive a proper invoice. A net invoice can be issued for foreign customers, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our website to view our additional offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the article description may occur and are reserved.

Condition: used, Year of construction: 2012, Engel ES4550/750K-V (2000) Injection Moulding Machine – Technical Data • Screw diameter: 90 mm • Shot volume (max.): 2480 cm³ • Injection rate (theoretical): 530 cm³/s • Specific injection pressure: 1910 bar • Increased injection pressure: 2180 bar • Plasticising capacity (standard screw): 70 g/s • Plasticising capacity (barrier screw): 118 g/s • Screw L/D ratio: 20 (standard) / 24 (barrier) • Screw speed: 140 rpm • Heating power: 67 kW • Number of heating zones (incl. nozzle): 7 Clamping Unit Itodpfey I Anmsx Abxjg • Clamping force: 7500 kN • Holding force: 8250 kN • Opening stroke: 900 mm • Mould height min./max.: 400 – 1120 mm • Max. daylight: 2020 mm • Platen size (H × V): 1500 × 1390 mm • Tie bar spacing (H × V): 1025 × 925 mm • Tie bar diameter: 170 mm • Ejector stroke / force: 250 mm / 110 kN Weights & Power • Drive power (hydraulic pump): 75 kW • Oil volume: 1000 l • Injection unit weight: 10 t • Clamping unit weight: 30 t • Net machine weight (without oil): 40 t

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,905 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 2,221 bar, opening stroke: 335 mm, total length: 2,420 mm, total width: 1,700 mm, total height: 3,100 mm, overall weight: 6,700 kg, Equipment: documentation/manual, For sale: Well-maintained injection moulding machine ENGEL INSERT 200V/60 with only 23,905 operating hours. The machine was used exclusively for sampling purposes. Inspection under power possible at any time! Technical specifications as per the pictures! Machine is immediately available! Itsdpfxey Iwlaj Abxsg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, clamping force: 70 kN, screw diameter: 32 mm, injection weight: 109 g, type of input current: AC, The Negri Bossi 70T in very good condition comes with hopper loader distance between tie bars 360x315 Ijdpjy Rvfkjfx Abxetg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, clamping force: 55 kN, screw diameter: 32 mm, injection weight: 109 g, The Negri Bossi 55T in very good condition the screw size 32mm distance between tie bars 315x280mm year of manufacture 2002 Iedpfx Aboy Rvcvjxjtg

Condition: refurbished (used), Arburg, Thermonic heating controller, Arburg Allrounder 4 units, as new condition. Stored as spare parts in maintenance. Iodpfeyvp Upex Abxstg Price per unit: €99

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, ENGEL eMotion 160 from a cleanroom injection molding production, with only 11,300 operating hours and in like-new condition. Enclosed you will find: Iodswb Dl Tepfx Abxstg • Current photos of the machine • The order confirmation from ENGEL to NYPRO The original new price was approximately €330,000. The sales price is €79,500 including crane. The technical data can be provided upon request and are also listed below in the documents. Included in the price: Dismantling the crane onto two Euro pallets, as well as moving the machine out of the cleanroom and loading onto your truck using a 15-ton forklift. If you are interested or have any questions, please feel free to contact me at any time. The machine is located near Karlsruhe and can be inspected there. Delivery possible within a few days.

Condition: used, Year of construction: 2023, operating hours: 22 h, functionality: fully functional, machine/vehicle number: 61035145, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 393 cm³, injection pressure: 2,429 bar, injection weight: 140 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 120 mm, opening stroke: 950 mm, installation height: 450 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 6,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you here our certified and highly flexible stock machines: The base model injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, user-friendly operation, and short lead times. It is suitable for a wide range of applications, including packaging, electrical and electronics industries, medical technology, and automotive manufacturing. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Meeting demanding delivery schedules with a base machine concept offering a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) Itedoy Rmwdepfx Abxeg CONTROL SYSTEM ▪ MC P1 with 15" TFT colour screen and multitouch functionality CLAMPING UNIT ▪ Clamping force: 1,200 kN ▪ Maximum mould opening force: 180 kN ▪ Clear space (h x v): 520 x 470 mm ▪ Mounting platen (h x v): 690 x 640 mm ▪ Mould installation height min. - max.: 180 - 450 mm ▪ Maximum opening stroke: 850 mm ▪ Maximum mould opening path: 450 mm ▪ Ejector drive: electric ▪ Ejector stroke: 120 mm ▪ Ejector force forward/backward: 27 / 33 kN ▪ Ejector speed forward/backward: 300 / 300 mm/s ▪ Maximum mould weight: 850 kg INJECTION UNIT ▪ Screw diameter / type: 35 mm / standard ▪ Effective L/D ratio: 22.9 ▪ Injection pressure: 2,429 bar ▪ Stroke volume: 154 cm³ ▪ Shot weight at max. stroke (for PS): 140 g ▪ Injection speed: 200 mm/s ▪ Injection flow rate: 192 cm³/s ▪ Screw drive / rotation speed: 374 rpm ▪ Plasticising rate (standard screw): 18.9 g/s ▪ Nozzle contact force: 34 kN ELECTRICAL PARAMETERS ▪ Connected load: 22.7 kW ▪ Installed heating power: 11.5 kW ▪ Power supply: 200 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS ▪ Net weight with control cabinet: 6.7 t ▪ Length x width x height: 5.18 x 1.76 x 1.90 m ADDITIONAL EQUIPMENT ▪ Wear-resistant plasticising unit ▪ BluePower full insulation for plasticising cylinder ▪ Open nozzle ▪ Air valve, single (BWAP) ▪ Pneumatic hot runner shut-off control, single ▪ Electrical interface for pneumatic cascade, 4-fold ▪ Euromap interface for handling: E18 + E67 ▪ Euromap central computer interface: E67, E77 ▪ Water manifold, 4-fold ▪ Electrical provisions for hydraulic auxiliary unit ▪ Automatic central lubrication ▪ Adaptive Process Control (APC) ▪ Injection-compression moulding mode ▪ Graphic analysis package ▪ Swivelling injection unit The machine is located at our Parsdorf facility and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, displacement volume: 41 cm³, injection pressure: 2,800 bar, injection weight: 37 g, mold height (min.): 210 mm, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Itedpeyz Sd Dsfx Abxsg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: used, Year of construction: 2013, clamping force: 2,400 kN, screw diameter: 55 mm, displacement volume: 653 cm³, injection pressure: 2,041 bar, ejector force: 59 N, Clamping force: 240 t Year of manufacture: 2013 Injection unit .../1330 Screw diameter: 55 mm Specific injection pressure: 2041 bar Injection volume: 653 ccm Screw L/D ratio: 22 Tool clamping system 240/... Clamping force: 240 t Mould platen dimensions: 910 x 930 mm Clearance between tie bars: 630 x 570 mm Ejector force: 59 kN Itsdsyvtu Hopfx Abxeg Mold height: 350 mm Opening stroke: 725 mm Max. platen distance: 1075 mm Ejector stroke: 200 mm Weight: 10,000 kg Dimensions (m) L x W x H: 5.5 x 1.8 x 2.4 m Year of manufacture: 2013 Control: Unilog B6

Condition: good (used), Year of construction: 2011, clamping force: 240 kN, screw diameter: 50 mm, displacement volume: 540 cm³, injection pressure: 2,470 bar, injection weight: 491 g, mold height (min.): 350 mm, Battenfeld HM 500/3400 Injection Moulding Machine General Specifications Clamping force: 240 t Year of manufacture: 2011 Control system: Unilog B6 Injection Unit Itsdpfxoyzzkgj Abxjg Unit designation: ... / 1330 Screw diameter: 50 mm Injection pressure: 2470 bar Injection volume: 540 cm³ Screw L/D ratio: 22 Clamping Unit Clamping system: 240 / ... Clamping force: 240 t Platen dimensions: 910 x 930 mm Clearance between tie bars: 630 x 570 mm Ejector force: 59 kN Ejector stroke: 200 mm Mould height: 350 mm Opening stroke: 725 mm Max. daylight (max. platen distance): 1075 mm Dimensions and Weight Weight: 10,000 kg Dimensions (L x W x H): 5.5 x 1.8 x 2.4 m

Condition: used, Year of construction: 2006, operating hours: 1,609 h, functionality: fully functional, machine/vehicle number: 61008195, clamping force: 800 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 201 cm³, injection pressure: 2,500 bar, injection weight: 183 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 750 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The fully hydraulic CX series features particularly compact, efficient, and flexible two-platen machines. The very compact two-platen concept with cantilevered clamping provides generous space for peripheral equipment and optimal accessibility. Efficient and intelligent energy management with BluePower servo drive provides a powerful foundation to meet the highest demands and delivers the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G01 (Order 38648713) CONTROL SYSTEM • MC6 with TFT colour touchscreen with multitouch functionality CLAMPING UNIT • Clamping force: 800 kN • Max. mould opening force: 55 kN • Clear space (h x v): 470 x 420 mm • Mounting plate (h x v): 670 x 670 mm • Minimum - maximum mould installation height: mm (specify values if known) • Maximum daylight: 750 mm • Maximum mould opening stroke: 500 mm • Ejector drive: hydraulic • Ejector stroke: 150 mm • Ejector force forward/backward: 23/10 kN • Ejector speed forward/backward: 760 / 800 mm/s • Maximum mould weight: 1000 kg INJECTION UNIT • Screw diameter/type: 40 mm / Standard (adaptable) • Effective L/D ratio: 20 • Injection pressure: 1860 bar • Stroke volume: 201 cm³ • Shot weight at max. stroke for PS: 183 g • Injection speed: 100 mm/s • Injection flow rate: 126 cm³/s • Screw drive/speed: 295 rpm • Plasticizing rate (standard): 12.3 g/s • Nozzle contact force: 50 kN ELECTRICAL PARAMETERS • Connected load: 15.0 kW • Installed heating capacity: 10.9 kW • Power supply: 400 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: 3.55 t • Length x width x height: 3.96 x 1.48 x 2.02 m ADDITIONAL FEATURES • Wear-resistant plasticizing • BluePower full insulation for plasticization cylinder • Open nozzle • 1 additional heating circuit for nozzle heating • Air valve, single (BWAP) • Pneumatic control for hot runner shut-off, single • Hydraulic core pull, single (BWAP) • Euromap interface for handling: E18, E63 • Euromap interface (central computer): E67, E77 • Adaptive Process Control (APC) • Injection-compression mode • Graphical analysis package The machine is located at our factory in Parsdorf and is available at short notice. Additional options can be offered upon request. Itodpey Rlmwjfx Abxog We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2011, operating hours: 57,077 h, functionality: fully functional, machine/vehicle number: 179742, clamping force: 700 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,451 bar, injection weight: 89 g, Here, as a specialist dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of injection moulding machines for more than 25 years. Vertical rotary table injection moulding machine – complete service history (annual documentation) Manufacturer: Engel Type: Insert 200H/70 Serial number: 179742 Year of manufacture: 2011 Operating hours: 57,077 h Control unit: CC 200 Language: German/English Fully functional Very well maintained condition Machine comes from the original German owner xxxxx without illustrated peripheral equipment xxxxx Extras: - Light curtain / light barrier - Freely programmable inputs and outputs - 9 freely programmable inputs, programmable by station - 9 freely programmable outputs - Handling interface Euromap 67 - Charge amplifier for cavity pressure-dependent post-pressure switching, including corresponding graphic pages - 3 volt-free monitoring inputs for monitoring peripheral equipment, such as temperature controllers - Euromap 63 interface for connecting to machine data acquisition system - Hot runner and shut-off nozzle control - Complete maintenance booklet - Language: German / English Injection unit: - Screw diameter: 30 mm - Shot weight: 89 g PS - Injection pressure: 1,451 bar / boosted 2,205 - Injection volume: 99 cm³ Clamping unit: - Clamping force: 70 tons / 700 kN - Rotary table diameter: 1,200 mm - Opening stroke: 305 mm - Ejector stroke / force: 105 mm / 20.1 kN - Fully electric clamping unit Itodpfx Abjy Ir Nyexsg Warranty: - Warranty until initial commissioning Loading/Shipping: - Free loaded onto buyer's truck, or free delivery (FOB) against reimbursement of shipping costs - Available ex-stock Hannover, Germany

Condition: used, Year of construction: 2013, operating hours: 29,000 h, clamping force: 50 kN, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 3,700 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Krauss Maffei Type: KM50-180AX Condition: aus laufender Produktion Itjdpfsppigdox Abxog Operating hours: ca. 26.000 CLAMPING UNIT: - Clamping force: 50 t Öffnungsweg: 300 mm Mould installation height min.: 150 mm Mould installation height max.: 470 mm Tie bar distance (h x v): 410 x 360 mm Plate dimension (h x v): 510 x 460 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Injection weight in polystyrol: 54 g Stroke volume: 59 cm³ Einspritzdruck: 2.500 bar CONTROL: MC5 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 x (Hydr. Kernzug-Aggregat) Air valves: 2 Hot runner control devices: 6 Robot interface: Euromap 67 Other equipment: Qualitätsüberwachungspacket GENERAL DATA: - Installed heating capacity: 8,1 kW Pump drive power: entfällt Total installed power: Motor + Heizung Total weight: 3.700 kg Total size L x B x H: 4,4 x 1,6 x 1,9 m

Condition: used, Year of construction: 2008, operating hours: 37,200 h, clamping force: 160 kN, displacement volume: 251 cm³, injection pressure: 2,500 bar, overall weight: 8,200 kg, screw conveyor diameter: 40 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Iedpfx Ajwd Udlobxetg

Condition: excellent (used), Year of construction: 2018, operating hours: 20,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit SECHS ACHS Roboter Hersteller: ARBURG Typ: 570S2200-400/170 Baujahr: 2018 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 40 mm Ijdpeu E Id Tofx Abxstg Max. Hubvolumen: 201 cm³ Spritzteilgewicht: 184 g/PS Schnecken DN 2: 25 mm Hubvolumen: 59 cm³ Spritzteilgewicht: 54 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Verlängerte Holme Vorverlegter Zylinder 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2018 Förderband Schutzzaun

Condition: ready for operation (used), Year of construction: 2019, operating hours: 21,000 h, clamping force: 1,270 kN, total width: 1,500 mm, total height: 1,700 mm, overall weight: 5,300 kg, product length (max.): 5,100 mm, This 3-axis SHIBAURA EC130SXIII-4A was manufactured in 2019. It features a clamping force of 1270 kN and a mold opening stroke of 400 mm. The machine has a maximum distance between platens of 950 mm and platen dimensions of 720 x 670 mm. If you are looking to get high-quality injection molding capabilities, consider the SHIBAURA EC130SXIII-4A electrical injection moulding machine we have for sale. Contact us for further details. • Distance between tie bars (H x V): 510 x 460 mm • Platen dimensions (H x V): 720 x 670 mm • Mold opening stroke: 400 mm • Max. distance between platens: 950 mm • Mold height (min–max): 180–550 mm • Ejection force: 30 kN (3.0 tf) • Ejection stroke: 90 mm • Injection unit code: 14 • Nozzle touch force: 17.7 kN (1.8 tf) • Injection speed (standard): 300 mm/s • Injection speed (high torque): 200 mm/s • Injection speed (high speed): 400 mm/s Iedpey Iffnefx Abxotg • Main breaker capacity (standard/high torque): 100 A • Main breaker capacity (high speed): 125 A • Transformer (standard): 75 kVA

Condition: ready for operation (used), Year of construction: 2020, operating hours: 20,000 h, clamping force: 2,250 kN, screw diameter: 55 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 9,900 kg, product length (max.): 6,400 mm, This 3-axis SHIBAURA EC230SXIII-8A was manufactured in 2020. It features a clamping force of 2250 kN and a mold opening stroke of 550 mm. The machine has a maximum distance between platens of 1230 mm and a screw diameter of 45 / 50 / 55 mm. If you are looking to get high-quality injection molding capabilities, consider the SHIBAURA EC230SXIII-8A electrical injection moulding machine we have for sale. Contact us for further details. • Distance between tie bars (H x V): 610 x 560 mm • Platen dimensions (H x V): 880 x 830 mm • Mold opening stroke: 550 mm Iedsy Ifctepfx Abxetg • Max. distance between platens: 1230 mm • Mold height (min–max): 250–680 mm • Ejection force: 49 kN (5.0 tf) • Ejection stroke: 130 mm • Injection unit code: 18 • Screw diameter: 45 / 50 / 55 mm • Max. injection capacity: 318 / 392 / 475 cm³ • Injection weight (PS): 292 / 361 / 437 g • Injection weight (PE): 232 / 286 / 346 g • Max. injection pressure: 247 / 200 / 165 MPa • Max. holding pressure: 247 / 200 / 165 MPa • Nozzle support force: 29.4 kN (3.0 tf) • Main breaker capacity (STD/High Torque): 125 A • Main breaker capacity (High Speed): 175 A • Transformer (STD): 75 kVA • Heating power: 15.2 / 16 kW

Condition: ready for operation (used), Year of construction: 2006, operating hours: 40,737 h, clamping force: 2,700 kN, overall weight: 8,800 kg, Vertical injection moulding machine manufactured in 2006. This Kloeckner Desma 968.250 ZO features a clamping force of 2700 kN and an injection volume of 2000 cm³. It includes additional equipment such as 2 ejectors and a vacuum pump. If you are looking to get high-quality injection moulding capabilities, consider the Kloeckner Desma 968.250 ZO machine we have for sale. Contact us for further details. • EUROMAP Size: 2700–3500 • Injection Volume: 2000 cm³ • Injection Pressure: 1730 bar • Nozzle Force: 75 kN • Operating: DRC 1210 • Electrical connections: 3 x 400V / 50Hz Iedpfxey Icw Uo Abxetg Additional equipment • 2 ejectors • vacuum pump

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper Itsdpfewugczsx Abxsg 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: ready for operation (used), Year of construction: 2001, clamping force: 3,000 kN, overall weight: 13,900 kg, This 5-axis DEMAG ERGOTECH CONCEPT 3000-1450 was manufactured in 2001. It features a clamping force of 3000 kN and a machine weight of 13.9 tonnes. With a maximum hydraulic pressure of 190 bar and a flow rate of 164 l/min, this machine is designed for efficient operation. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH CONCEPT 3000-1450 hydraulic injection moulding machine we have for sale. Contact us for further details. • Max. Hydraulic Pressure: 190 bar • Max. Flow Rate: 164 l/min • Total Amperage: 181 A Itodey Icikjpfx Abxjg • Heating Amperage: 102 A • Drive Amperage: 79 A • Control Amperage: 67 A • Operation Voltage: 400 V • Frequency: 50 Hz • Certification: CE

Condition: ready for operation (used), Year of construction: 2019, clamping force: 1,200 kN, total width: 2,200 mm, total height: 2,065 mm, overall weight: 8,450 kg, product length (max.): 5,259 mm, Hydraulic injection moulding machine manufactured in 2019. This Engel Victory 120 BMG features a clamping force of 120 t and a tie-bar-less design, ensuring efficient operation. It includes a high-speed injection unit and an advanced CC300 control system with a 21.5" full HD touchscreen. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 120 BMG machine we have for sale. Contact us for further details regarding this machine. • Tie-bar-less design • Machine hours: on-time 2,767 h; estimated operating time ~200 h (never used for regular series production) • Oil filling: 300 L • Power supply: 3x400 V + N + PE / 50 Hz • Control system: CC300, 21.5" full HD touchscreen • Hydraulic system: ecodrive SHV3-HSI servo-hydraulic • High-speed injection with accumulator • Oil cooler: standard • Injection unit size: hydraulic 200 • Platen size: standard Euromap • Mould height: increased +200 mm • Opening stroke: extended +200 mm • Ejector system: platen ejector • Core pull: hydraulic and pneumatic • Cooling water connections: machine and mould separate • Flow regulator: 0–10 l/min • e-flomo temperature control system: 4 and 6 circuits • Remote service: e-connect.24 (2 years) Additional equipment • Robot: ENGEL viper 12 RC300 • Max payload: 12 kg • Strokes: Z 1,160 mm; X 600 mm; Y 900 mm Itedpfxjy Ib Aij Abxog • C axis: pneumatic 0–90°, 30 Nm • Max system height: 3,600 mm • Min deposit height: 1,000 mm • Integrated conveyor belt • Belt width: 350 mm • Belt temperature resistance: up to 300 °C • Temperature control unit: HB-Therm Thermo-5 HB-160Z1 • Max temperature: 160 °C • Heating power: 8.0 kW • Pump: 0.50 kW, 30 L/min, 52 m • Cooling capacity: 30 kW @ 60 K • Vacuum pump: Pfeiffer DUO 35, 32 m³/h • Induction heating system: 50 kW, 50–200 kHz • Melting chamber: max ingot weight 100 gNo plastic extruder included!