Condition: excellent (used), Year of construction: 1997, Engel ES 2550/500 KG Clamping force: 500 tons Year of manufacture: 1997 Tie bar spacing: 84x84 cm Screw diameter: 80 mm Gusdpfx Ageyl S Ehefoa Injection weight: 1402 g Minimum-maximum mould height: 250 mm – 850 mm Machine weight: 25,500 kg

Condition: excellent (used), Year of construction: 1997, Engel ES 2550/500 KG Clamping force: 500 tons Year of manufacture: 1997 Distance between tie bars: 84x84 cm Screw diameter: 70 mm Shot weight: 1230 g Mould height (min-max): 250 mm – 850 mm Godpfx Ageyl S Enjfoua Machine weight: 25,500 kg

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Godpfjyym Saox Agfsua

Condition: good (used), 1x used Arburg 370U 500-170 Gjdpfeyym R Nex Agfoua With Multilift Immediately available!

Condition: good (used), Year of construction: 2002, Selling this machine, immediately available. For further details, see the pictures. Gusdpfx Agjyym Rpjfoa

Condition: like new (used), operating hours: 57,410 h, Plastic injection moulding machine - without robot. Clamping unit 35/320 Available KW 35 -2025 Year: 2008 Gjdpfxowxb Dbe Agfsua Operating hours: 125433 Pump operating hours: 57410 Clamping Force [kN]: 350/350 Max. mould opening stroke [mm]: 350 Mould height Min./WA211 [mm]: 180/230/280 Daylight between platens max./extended [mm]: 530/580/630 Mould platen size (HxV) [mm]: 460x450 Distance between tie bars (HxV) [mm]: 320x320 Min. permissible mould diameter (k) [mm]: 160 Max mould weight / moving platen [kg]: 440/330 Ejector stroke standard/extended [mm]: 100 Ejection / Retraction force [kN]: 33/13 Injection unit 35 Screw diameter [mm]: 22 L/D ratio: 20 Specific injection pressure (up to 400°C) [bar]: 1570 Cylinder head volume, max. [cm³]: 34 Max. shot weight (PS, PE*) [g]: 30 Net weight (without oil) [~kg]: 2620

Condition: good (used), Year of construction: 2004, VC330-80 plus Year: 2004 Clamping force : 800kn Injection Unit 330 Control unit CC200 A01 Screw D40 Working hours 91112 1x corepull 4x digital input 4x digital output 1x signe pahse socket Guedpfevdqbhsx Agfoa 1x trhee phase socket NEW PUMP

Condition: ready for operation (used), Year of construction: 1997, operating hours: 111,569 h, clamping force: 10,000 kN, This 6-axis Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. It features a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine includes an injection pressure limit of 185 bar and a metering stroke of approximately 465 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1000-8000 M machine we have for sale. Contact us for further details. • Injection unit • Screw speed: 92 rpm • Injection speed stages: • 25% → 23 mm/s • 50% → 46 mm/s • 75% → 69 mm/s • 100% → 92 mm/s • Injection measurement stroke: 200 mm forward movement actually used to inject the shot • Metering stroke: approx. 465 mm maximum screw travel during plasticizing • Injection pressure limit: 185 bar • Hydraulic system • Pump differential pressure: 10 bar • Pressure circuits: • Main pressure: 250 bar Godjywlvropfx Agfsua • Injection pressure: 185 bar • Hydraulic circuit: 150 bar • Secondary pressure: 120 bar • Auxiliary pressure: 50 bar • Closing pressure drop: approx. 4–6 bar/min • Proportional valve pressure ranges: • Minimum: 50 bar • Maximum: 150 bar • Spindle speed: 92 rpm • Heating system • Number of heating zones: 9 • Cylinder heater power examples: 9100 W, 8200 W, 6200 W, 5200 W, 2400 W, 650 W, 300 W • Operating voltages recorded: 230 V, 220 V, 380 V • Temperature accuracy deviation: approx. −1 K to +2 K • Condition / maintenance relevant data • Machine alignment tolerance:

Condition: good (used), Year of construction: 2000, Arburg 420C 1000-350 Clamping force: 100 tons Gjdjrthkuepfx Agfeua Distance between tie bars: 420 x 420 mm Mold plattens: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm3 Shot weight: 127 g New temperature control board ARB 777 (cost 2.750€)

Condition: used, Year of construction: 2003, operating hours: 67,092 h, functionality: fully functional, clamping force: 10,000 kN, screw diameter: 120 mm, displacement volume: 5,655 cm³, injection pressure: 1,632 bar, total length: 11,600 mm, total width: 2,900 mm, total height: 2,500 mm, overall weight: 76,500 kg, clamping force: 10000 kN distance between tie-bars h x v: 1120 x 1400 mm size of mould plates h x v: 1960 x 1690 mm min. mould height: 550 mm max. mould height: 1020 mm max. open daylight: 2120 mm opening stroke: 1100 mm screw diameter: 120 mm swept volume: 5655 ccm injection pressure: 1632 bar Guedpfeywg N Tex Agfja equipment included screen text german complact flash drive core pulling hydraulically 4x Anti vibration mounts electric interface for handling units according to Euromap 12 interface for temperature control units increased oil cooler mould heating 16x measures of machine l x w x h: 11.6m x 2.9m x 2.5m total weight: 76500KG

Condition: good (used), Double piston screen changer, double piston screen changer for extruders, co-rotating twin screw extruder, twin screw extruders, plastic injection molding machine -Manufacturer: Anji, Continuous twin-piston screen changer -Type: AJ Guedpfx Aoywgbvegfja -Individual components: see photos -Submission/Price: complete -Dimensions: 1140/880/H495 mm -Weight: 313 kg

Condition: excellent (used), Year of construction: 2001, KraussMaffei KM 200-1400 CX Year of construction 2001 Control MC4 Operating hours: approx. 16,700h (pump) Screw diameter 70 mm Fuel weight: approx. 841gr./hp Spar distance 560 x 560mm Machine weight: 10500kg Gjdpfx Agoyyd Sqjfeua Extras: Core pulls Handling interface Machine is free! Subject to alterations, prior sale and errors excepted!

Condition: excellent (used), Year of construction: 2016, operating hours: 34,000 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 30 mm, clearance between the columns: 320 mm, displacement volume: 85 cm³, injection pressure: 2,000 bar, injection weight: 77 g, ejector force: 30,000 N, Arburg 320C 500-170 Year of manufacture: 2016 Control system: Selogica Operating hours: approx. 34,000h (pump) Screw diameter: 30 mm Shot weight: approx. 77 g/PS Tie bar spacing: 320 x 320 mm Extras: Core pull Color dosing interface Euromap 67 handling interface Air valve Guedpjyyd Skefx Agfja Machine weight: 2,200 kg Machines are available! Subject to changes, prior sale, and errors!

Condition: excellent (used), Year of construction: 2016, operating hours: 45,000 h, functionality: fully functional, clamping force: 600 kN, clearance between the columns: 310 mm, ejector stroke: 110 mm, opening stroke: 270 mm, total length: 3,980 mm, total width: 1,170 mm, total height: 1,870 mm, heating capacity: 6.25 kW (8.50 HP), Haitian MA600 II/130 eco Year of manufacture: 2016 Clamping force: 60 t Immediately ready for operation. Guedpfeyyd Sdox Agfja Machines are available! Subject to changes, prior sale, and errors!

Condition: used, Year of construction: 2011, USED PLASTIC INJECTION MOULDING MACHINE Manufacturer: ENGEL, Model: Insert 200H/70 Configuration: Rotary table Clamping force: 70 t Year of manufacture: 2011 - well maintained, serviced, no oil leakage. Commissioning date: 09.06.2011 Operating hours: 57,077 h Injection unit: 30 mm Control system: CC200 Weight: 6,200 kg Gjdoyx St Topfx Agfjua Special features: - Light curtain - Freely programmable inputs and outputs - 9 freely programmable inputs can be programmed station-dependent - 9 freely programmable outputs - Handling interface: Euromap 67 - Charge amplifier for pressure-dependent holding pressure switchover, including corresponding graphical pages - 3 potential-free monitoring inputs for monitoring of peripheral equipment such as temperature control units - Euromap 63 interface for integration into machine data acquisition systems - Hot runner control / shut-off nozzle control

Year of construction: 1998, condition: ready for operation (used), Product material: LSR, ejector stroke: 150mm, operating pressure: 250bar, clamping force: 750kN, min. tool installation height: 250mm, opening stroke: 375mm, tie bar spacing X/Y: 320mm/320mm, max. platen dimensions X/Y: 490mm/490mm, max. injection volume: 187.5cm³, injection force: 145kN, max. injection pressure: 1150bar, screw diameter: 40mm. Machine dimensions X/Y/Z: approx. 4000mm/1850mm/2000mm, weight: approx. 3100kg. Including two dosing units. An on-site inspection is possible. Guodpfx Aeyx H Hhegfja

Condition: excellent (used), Injection moulding technology module: TX DIAS RX DIAS PLUS..... Guodpfxsqxdnlo Agfoa 2 pcs control cards Demag

Year of construction: 1992, condition: good (used), keyboard-Klöckner formetk year 1992 Gsdpjyx Diyjfx Agfsua

Condition: like new (used), Year of construction: 2015, clamping force: 1,200 kN, Engel E-Victory 170H/50V/120 combi (2015) 2k machine CC300 controll Clamping force: 1200 kN Mould min-max: 300mm Total tool max height: 800 mm plate size : 740 x 680mm Opening stroke: 505 mm Ejector stroke: 130 mm Ejector force: 39.8 kN Pump drive power: 15 kW Injection unit 1 Screw diameter: 25 mm Godpfx Aoxyi Rvjgfsua Max. swept volume: 59 cm³ Screw speed max: 400 r/min Screw speed max (current): 400 r/min Injection rate: 109 cm³/s Injection rate (increased): 109 cm³/s Specific injection pressure: 2400 bar Specific injection pressure (increased): 2400 bar Injection unit 2 Screw diameter: 20 mm Max. swept volume: 25 cm³ Screw speed max: 450 r/min Injection rate: 104 cm³/s Specific injection pressure: 2400 bar Machine with conveyor. Working hours : 41.427 h Possible to buy robot Engel VIPER 20 Linear (Z=3320mm)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 91,708 h, clamping force: 8,000 kN, screw diameter: 135 mm, displacement volume: 8,870 cm³, total length: 11,810 mm, total width: 3,200 mm, total height: 2,900 mm, Clamping force: 8000 kN Tie bar spacing h x v: 1170 x 1000 mm Platen size h x v: 1550 x 1520 mm Min. mold height: 500 mm Max. mold height: 1100 mm Gjdsyv E Hbjpfx Agfeua Max. daylight: 2100 mm Opening stroke: 1600 mm Screw diameter: 135 mm Shot volume: 8870 ccm Injection pressure: 1640 bar Equipment Screen text in German Screen text in English CEE socket 16A CEE socket 16A CEE socket 16A Compact Flash drive Hydraulic core pull 1x Machine including handling Machine including safety enclosure Machine with water manifold EUROMAP 12 interface Handling interface USB interface Mold heater 16x Handling Technical Data Type of handling: Linear Brand: ENGEL Model: ERC 64/1-F Handling weight: 25 kg X-axis: 1300 mm Y-axis: 2200 mm Z-axis: 4760 mm Machine dimensions LxWxH: 11.81 m x 3.2 m x 2.9 m Total weight: 56,000 kg

Condition: used, Year of construction: 2004, operating hours: 76,000 h, total height: 2,480 mm, total width: 2,330 mm, total length: 9,830 mm, screw diameter: 70 mm, clamping force: 4,200 kN, displacement volume: 1,047 cm³, 2. Unit 55 with ø 22 Injection pressure: 1674 bar Volume: 30cm³Distance between injection unit 1 and 2: 300 mm (piggy / Multinject) clamping force: 4200 kN distance between tie-bars h x v: 800 x 800 mm size of mould plates h x v: 1270 x 1200 mm min. mould height: 380 mm max. open daylight: 1400 mm opening stroke: 1020 mm screw diameter: 70 mm swept volume: 1047 ccm injection pressure: 1778 bar equipment included screen text german Gedjyv E Ewjpfx Agfsua core pulling hydraulically 6x Machine without Handling machine without material hopper Anti vibration mounts mould heating 16x Injection moulding machine for two components measures of machine l x w x h: 9.83m x 2.33m x 2.48m total weight: 23090KG

Condition: ready for operation (used), Year of construction: 2005, operating hours: 59,000 h, clamping force: 4,200 kN, screw diameter: 60 mm, displacement volume: 769 cm³, injection pressure: 2,200 bar, total length: 6,830 mm, total width: 2,330 mm, total height: 2,480 mm, overall weight: 23,090 kg, Clamping force: 4200 kN Tie bar spacing (H x V): 800 x 800 mm Platen size (H x V): 1270 x 1200 mm Min. installation height: 580 mm Max. platen distance: 1300 mm Opening stroke: 720 mm Screw diameter: 60 mm Gujdeyv E Daspfx Agfea Shot volume: 769 ccm Injection pressure: 2200 bar Equipment Display language: German Hydraulic core pull 4x Machine without handling Machine without material hopper Levelling elements Mould heating 12x Machine dimensions (LxWxH): 6.83m x 2.33m x 2.48m Total weight: 23090 kg

Condition: refurbished (used), Year of construction: 2008, operating hours: 26,033 h, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 75 mm, displacement volume: 1,657 cm³, injection pressure: 2,022 bar, total length: 7,200 mm, total width: 1,750 mm, total height: 2,420 mm, overall weight: 16,400 kg, clamping force: 4000 kN distance between tie-bars h x v: 710 x 710 mm size of mould plates h x v: 1010 x 1010 mm min. mould height: 300 mm max. mould height: 710 mm max. open daylight: 1380 mm opening stroke: 670 mm screw diameter: 75 mm swept volume: 1657 ccm injection pressure: 2022 bar measures of machine l x w x h: 7.2m x 1.75m x 2.42m Guodpfxsyv Ez Ej Agfja total weight: 16400KG

Condition: good (used), Year of construction: 2005, Krauss Maffei 500-2700 C1 (2005) MC4 controll Clamping force: 500 t Screw diameter: 80 mm Type: Horizontal Drive: Hydraulic Clamping unit: Clamping force: 500 t Opening stroke: 1260 mm Tie bar spacing (H×V): 900×800 mm Platen size (H×V): 1270×1200 mm Injection unit: Screw Ø: 80 mm Max. inj. press.: 1829 bar Inj. vol.: 1433 cm³ Shot weight (PS): 1304 g Gsdpfxjx H Au Re Agfsua Electrical equipment: Voltage: 400 V / 50 Hz Sepro Linear robot available Accumulator English, French, Czech language available. Hours: 61000

Condition: ready for operation (used), Year of construction: 2004, operating hours: 69,000 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, injection pressure: 1,441 bar, total length: 7,980 mm, total width: 2,200 mm, total height: 2,570 mm, overall weight: 30,750 kg, Clamping force: 3500 kN Gedpeyv Embofx Agfjua Platen size (h x v): 1050 x 980 mm Minimum mould height: 350 mm Maximum platen distance: 1300 mm Opening stroke: 950 mm Screw diameter: 70 mm Shot volume: 1039 ccm Injection pressure: 1441 bar Equipment Screen text in German Hydraulic core pull 2x Machine including conveyor belt Machine including handling unit Machine including safety enclosure Machine without material hopper Leveling elements Handling Data Manufacturer: ENGEL Control: ER-HLI 81 Year of manufacture: 2004 Machine dimensions (LxWxH): 7.98m x 2.22m x 2.57m Total weight: 30750KG