Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Injection volume: 891 cm3 Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Min Mould installation height: 450 mm Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) Hot Runners 1. 24-zone integrated hot runner controller (ZE 273) 2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10) 3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276) 4. Hot runner connector upgrade for 24 zones (SO 01) 5. Total: 60 zones across two controllers Equipment Highlights Injection 1. Electric screw drive, frequency-controlled (WA 313) 2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12) 3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08) Quality & Process Monitoring 1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04) 2. Holding pressure switchover with peak value capture and recording (ZE 350) 3. 100% process data recording (PDE) with statistics and graphics (ZE 420) Mold & Core Pulls 1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237) 2. Electric pressure relief for core pulls (SO 27) 3. Separate pneumatic hot runner needle (SO 04x) Quick Mold Clamping 1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d) Connectivity & Automation 1. OPC/UA interface for host systems (SO 5631) 2. WC5 World Connect — remote access and service (ZE 571) 3. Integrated BDE/PDE production data management (ZE 471 + ZE 420) Nedpfxjyzylvj Af Sodb 4. Demag robot interface via CAN bus (ZE 752) Energy & Infrastructure 1. Integrated energy monitoring with per-part cost calculation (ZE 4921) 2. Elastic machine mounting / vibration isolation (WA 180) \+ 2x Magnetic platten

Condition: good (used), Year of construction: 2001, Demag Ergotech 250/560-840 Euromap size: 2500-840 Ndsdpfx Aez D Ttgsf Sjb CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN INJECTION UNIT (840) Screw diameter: 45 mm L/D ratio: 20 Injection pressure: 2402 bar Stroke volume: 358 cm³ Shot weight (PS): 320 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 80 kN Barrel heating power: 13.0 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 43 kW (50 kW with electric screw drive) Dry cycle time (EUROMAP 6): System: 2.35 s – 392 mm / 2.25 s – 392 mm; Concept: 2.25 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 10700 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.1 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: ready for operation (used), Year of construction: 2002, clamping force: 2,000 kN, screw diameter: 50 mm, Hydraulic injection moulding machine manufactured in 2002. This Arburg Allrounder 570 C 2000-675 features a clamping force of 2,000 kN and a maximum mold height of 950 mm. It includes a screw diameter of 50 mm and a maximum injection volume of 353 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 570 C 2000-675 machine we have for sale. Contact us for further details. • Space between columns: 570 x 570 mm • Maximum mold height: 950 mm • Minimum mold height: 300 mm • Maximum injection volume: 353 cm³ • Maximum injection pressure: 2,080 bar • Centering ring: 125 mm • Hot runners in the machine: 9 Ndedsz D T Dlspfx Af Seb • Core pullers: 1 • Pneumatic valves: 1 Additional equipment • Wittmann W821 robot (year 2018)

Condition: used, Year of construction: 2006, Demag Modular 250/560-1450 Euromap size: 2500-1450 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Nedpfxsz D Tnqs Af Sjdb Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN INJECTION UNIT (1450) Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1400 bar Stroke volume: 1039 cm³ Shot weight (PS): 940 g Max. dosing stroke: 270 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 110 kN Barrel heating power: 27.0 kW Electric screw drive (WA): 30 kW Hopper capacity: 110 l GENERAL Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 57 kW (64 kW with electric screw drive) Dry cycle time (EUROMAP 6): 2.35 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 11200 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.2 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: good (used), Year of construction: 2016, clamping force: 13,000 kN, Equipment: documentation/manual, KraussMaffei KM 1300 MX – SP 8100 / Screw Ø105 mm Clamping Unit 1. Clamping force: 13,000 kN / 1,300 t 2. Mold opening force: 910 kN Ndsdpfx Asztpkpjf Seb 3. Moving platen force, opening/closing: 159 / 153 kN 4. Platen dimensions: 2,150 × 1,910 mm 5. Distance between tie bars (H × V): 1,550 × 1,250 mm 6. Opening stroke: 2,350 mm 7. Mold height min./max.: 700 / 1,400 mm 8. Maximum daylight: 3,050 mm 9. Ejector stroke: 350 mm 10. Ejector force forward/backward: 250 / 125 kN 11. Optional increased mold height min./max.: 950 / 1,650 mm 12. Daylight with increased mold height: 3,300 mm Injection Unit – SP 8100 Screw diameter: 105 mm 1. L/D ratio: 23 2. Maximum injection pressure: 1,778 bar 3. Stroke volume: 4,546 cm³ 4. Shot weight PS: 4,137 g 5. Injection flow rate: 805 cm³/s 6. Screw speed nominal/max.: 126 / 159 rpm 7. Plasticizing rate PS at nominal speed: 147 g/s 8. Plasticizing rate PE at nominal speed: 116 g/s 9. Plasticizing rate PS at maximum speed: 187 g/s 10. Plasticizing rate PE at maximum speed: 147 g/s 11. Nozzle contact force: 166 kN Electro-Hydraulic Equipment 1. Pump motor rated power: 110 kW 2. Installed heating capacity: 59 kW 3. Barrel heating/control zones: 7 4. Dry cycle rate according to Euromap 6: 761 cycles/h 5. Dry cycle time according to Euromap 6: 4.7 s 6. Oil tank capacity: 1,500 l Dimensions & Weight 1. Net weight incl. control cabinet: 77 t 2. Dimensions (L × W × H): 12.09 × 3.66 × 2.67 m 3. Maximum mold weight: 29,000 kg With Electric Screw Drive 1. Screw drive power: 117 kW 2. Screw speed nominal/max.: 123 / 193 rpm 3. Plasticizing rate PS nominal: 144 g/s 4. Plasticizing rate PE nominal: 114 g/s 5. Plasticizing rate PS maximum: 226 g/s 6. Plasticizing rate PE maximum: 178 g/s With Accumulator (ZE) 1. Injection flow rate: 1,732 cm³/s Equipment: 1. Removable tie bar (rectable tie bar) 2. Euromap 67 for robot 3. 48 Hotrunner controllers 4. 8 pneumatic cascades 5. 6 hydraulic cascades 6. 2+2 cores 7. MC 6 controll panel Material used: PP, PC

Condition: used, Year of construction: 2017, For Sale: Negri Bossi M70-V90 Injection Moulding Machine Manufacturer: Negri Bossi Model: M70-V90 EUROMAP Class: 900 H - 210 Year of Manufacture: 2017 Operating Hours: 10,792 hours Condition: Good working condition, available for inspection Machine Highlights - Reliable and energy-efficient injection moulding machine - Well maintained and ready for immediate operation - Suitable for a wide range of plastic injection moulding applications - Low operating hours for its age - Equipped according to EUROMAP Class 900 H - 210 specifications Technical Specifications - Manufacturer: Negri Bossi - Model: M70-V90 - Year: 2017 - Operating Hours: 10,792 - EUROMAP Class: 900 H - 210 Additional Information The machine can be inspected under power by appointment. Maintenance records and further technical details can be provided upon request. Available for immediate sale. For pricing, additional specifications, photos, or a video demonstration, please contact us. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. Nedpfx Afoz Dwn Io Sedb We advise you to check any vital details! Manufacturer: Negri Bossi Model: M70-V90 EUROMAP Class: 900 H - 210 Year of Manufacture: 2017 Operating Hours: 10,792 hours

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, clamping force: 700 kN, Equipment: documentation/manual, Seologica controll Clamping force: 70 t Screw diameter: 40 mm (highly resistant) Distance between tie bars V: 370 mm Distance between tie bars H: 370 mm Tie bar distance: 370x370 mm HxV plates: 510x510 mm Mould tickness min-max: 200 Njdoygtquopfx Af Sedb Stroke: 400mm Shot volume: 188 cm3 Type: Uni Drive: Hydraulic Air valve: 1 Hours: 23000 2 servo pumps 4 free cooling circuits 6 electric heating zones for mould

Condition: excellent (used), Year of construction: 2010, clamping force: 600 kN, Equipment: documentation/manual, Clamping force: 60 t Screw diameter: 20 mm Distance between tie bars V: 370 mm Distance between tie bars H: 370 mm Type: Horizontal Drive: Hydraulic Ndodpfx Afjzn I H Ej Seb Engine hours : 60,700 h Hydraulic circuits : 1 x Hot runners : 6 x Robot interface : NO

Condition: ready for operation (used), Year of construction: 2004, clamping force: 1,600 kN, screw diameter: 45 mm, Hydraulic injection moulding machine manufactured in 2004. This Engel Victory 750/180 Power features a clamping force of 1,600 kN and a maximum injection volume of 259 cm³. It includes a screw diameter of 45 mm and a maximum injection pressure of 1,600 Bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 750/180 Power machine we have for sale. Contact us for further details regarding this machine. • Space between columns: 520 x 520 mm • Maximum mold height: 585 mm • Minimum mold height: 275 mm • Maximum injection volume: 259 cm³ • Maximum injection pressure: 1,600 bar • Centering ring: 160 mm • Hot runners in the machine: 8 • Core puller: 1 • Pneumatic valves: 2 Nodpfxjz Dvd Io Af Sjdb • Programmable inputs: 2 Additional equipment • Robot: Wittmann W818 (MY: 2015)

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, Technical Data Year of manufacture: 2007 Clamping side Clamping force: 1300 t Opening stroke/installation height max.: 2300 mm Distance between clamping plates max.: 4000 mm Tool installation height min./max.: 1000 - 1700 mm Clamping plate max. height: 1910 mm Tool size min.: 1000 - 1700 mm Ndjdpfjz Dux Rsx Af Seb Distance between tie bars: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Injection side Screw diameter: 135 mm Injection volume: 8588 cm³ Injection pressure: 1390 bar Injection weight: 7729 g/shot Core pulls AWS/DS: 1/1 Needle gate pneumatic: 1 The machine is supplied with a Kuka robot and can be inspected during production.

Condition: good (used), Year of construction: 2002, overall weight: 3,200 kg, Krauss Maffei 80-220 C1 injection molding machine 80 tons Year 2002 Nsdpfx Afsz Dquzo Sodb

Condition: excellent (used), Year of construction: 2000, Engel ES 500/110 HL Clamping force: 110 tons Screw diameter: 35 mm Ndedjxvnhlopfx Af Sjb Year of manufacture: 2000

Condition: used, Year of construction: 2005, operating hours: 130,948 h, functionality: fully functional, machine/vehicle number: 155136, clamping force: 1,500 kN, total length: 5,196 mm, total width: 1,704 mm, total height: 2,189 mm, overall weight: 9,500 kg, Equipment: documentation/manual, Technical condition: operational, used until the end of its production cycle. Regularly serviced and maintained. Nedpez Enu Iefx Af Sedb This machine is ideally suited for the production of plastic components. It is a robust design from a reputable manufacturer, ensuring reliable and precise operation. The machine can be inspected by prior arrangement. Technical documentation is available. Assistance with organizing loading is provided.

Condition: ready for operation (used), Year of construction: 2022, clamping force: 900 kN, screw diameter: 36 mm, Hydraulic injection moulding machine manufactured in 2022. This HAITIAN Mars III MA 900/280 A ECO features a clamping force of 900 kN and a maximum injection pressure of 2,340 Bar. It includes a screw diameter of 36 mm and a maximum injection volume of 121 cm³. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN Mars III MA 900/280 A ECO machine we have for sale. Contact us for further details. • Space between columns (tie-bar spacing): 360 x 360 mm • Maximum mold height: 390 mm • Minimum mold height: 150 mm • Maximum injection volume: 121 cm3 • Maximum injection pressure: 2,340 bar • Centering ring: 125 mm Ndodpfx Afoz Dk Tqe Sob • Hot runners in the machine: 6 • Core puller: 2 • Pneumatic valve: 2

Condition: ready for operation (used), Year of construction: 2002, clamping force: 1,000 kN, screw diameter: 25 mm, Hydraulic injection moulding machine manufactured in 2002. This Arburg 420 C 1000-150/60 features a clamping force of 1,000 kN and a maximum mold height of 750 mm. It includes a screw diameter of 25/22 mm and a maximum injection volume of 54/30 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 420 C 1000-150/60 machine we have for sale. Contact us for further details. Ndodpfez Dk Sgjx Af Ssb • Space between columns: 420 x 420 mm • Maximum mold height: 750 mm • Minimum mold height: 350 mm • Screw diameter: 25/22 mm • Maximum injection volume: 54/30 cm3 • Maximum injection pressure: 2500/2340 Bar • Centering ring: 125 mm • Hot runners in the machine: 2 • Core puller: 1

Condition: ready for operation (used), Year of construction: 2016, clamping force: 1,100 kN, screw diameter: 22 mm, Hydraulic injection moulding machine manufactured in 2016. This Krauss Maffei 110-180-180 CX V features a clamping force of 1,100 kN and a minimum mold height of 377 mm. It includes a screw diameter of 22 mm and a centering ring of 125 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 110-180-180 CX V machine we have for sale. Contact us for further details. • Space between columns: 530 x 470 mm • Minimum mold height: 377 mm • Centering ring: 125 mm Ndedpfoz Dk Rvex Af Ssb • Core pullers: 3 • Pneumatic valves: 2 • Programmable inputs: 3

Condition: reconditioned (used), Year of construction: 2002, operating hours: 45,992 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 28 mm, injection pressure: 1,069 bar, injection weight: 9 g, total length: 2,050 mm, total width: 1,030 mm, total height: 2,780 mm, overall weight: 900 kg, warranty duration: 6 months, Equipment: documentation/manual, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this Boy 22AVV injection moulding machine. Vertical clamp with vertical injection is ideally suited for insert moulding, the operator can load parts for over moulding easily. The pneumatic gate ensures safe operation. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Ndjdpfeywx Hqsx Af Seb

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, clamping force: 550 kN, screw diameter: 32 mm, injection pressure: 2,127 bar, injection weight: 87 g, total length: 4,220 mm, total width: 1,105 mm, total height: 2,040 mm, warranty duration: 6 months, Equipment: documentation/manual, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this high precision BOY 55A injection moulding machine. Compact yet versatile, the BOY 55A features generous tie-bar spacing and a space-saving footprint. Fitted with a Procan CT controller and a 32 mm screw, it delivers a shot weight of 68 g (PS). Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Ndedpjypcltofx Af Sjb Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. *The video shown in this listing is of a previously refurbished BOY 55A which is very similar to the BOY 55A machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: ready for operation (used), Year of construction: 2008, 1,0 piece injection molding machine with robot Manufacturer: DEMAG Type: IntElect 150/520-410 Year of manufacture: 2008 Nsdpjz Dibmofx Af Ssdb Clamping force: 150 tons Tie bar spacing: 520 x 520 mm Screw diameter: 35 mm Injection volume: 166 cm³ Shot weight: 146 g/shot Equipment: Part removal robot, manufacturer: Wittmann, type: W721, year of manufacture: 2006 Travel distances: Y = 550 mm, Y = 1,200 mm, Z = 2,000 mm 2 x core pull Safety fence

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,265 h, clamping force: 1,600 kN, screw diameter: 35 mm, overall weight: 8,700 kg, controller manufacturer: ENGEL, controller model: CC200, Hydraulic injection moulding machine manufactured in 2013. This Engel Victory 500/160 tech features a clamping force of 1600 kN and an injection unit of 500. It includes a patented tiebarless clamping system and a highly abrasion-resistant cylinder. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 500/160 tech machine we have for sale. Contact us for further details. • Injection unit: 500 • L/D ratio: 20 • Hydraulics: ECODRIVE SHV1 (high-dynamic servo pump) • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 102 kW • Clamping system: Patented tiebarless, fully hydraulic ENGEL clamping system • Centering: 160 mm Ndodpfx Aez Dgvzef Sjb • Ejector: Central ejector • Hydraulic core pulls: 2 on moving platen • Pneumatic mold valve control: 2-fold FESTO, up to 16 bar • Mold heating: 8 control zones • Cylinder/screw execution: M3 abrasion/corrosion-resistant cylinder (up to 350 °C), hardened screw S8 (Ø 35 mm, L/D 20), non-return valve R9b • Open nozzle: Flange thread M28 x 1.5, radius 15 mm, bore 4 mm • Mold temperature control: Flow regulator 0–10 l/min with 12 circuits (2 x 6 circuits) • Hydraulic tank capacity: Main approx. 330 l; suction approx. 130 l • Interfaces: Coloring device interface; RS-485 for temperature control units; Euromap 67 / AN-146 robot interface; interface for Priamus PDDI 8903D1 and 8903E2 • Languages: Czech and German

Condition: ready for operation (used), Year of construction: 2015, operating hours: 29,446 h, clamping force: 2,600 kN, screw diameter: 60 mm, overall weight: 22,300 kg, controller manufacturer: ENGEL, controller model: CC300, product length (max.): 8,780 mm, Electrical injection moulding machine manufactured in 2015. This Engel e-victory 1640/260 features a clamping force of 2600 kN and an injection unit of 1640. It includes a tiebarless clamping system and a servo-electric injection system for high efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel e-victory 1640/260 machine we have for sale. Contact us for further details. • Clamping system: Tiebarless ENGEL clamping system • Injection unit: 1640 • Injection system: Servo-electric, high execution • L/D ratio: 24 • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) • Hydraulics: ECODRIVE SHV1 (1 demand-regulated servo pump) • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 164 kW • Centering: 160 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen • Vacuum/compressed air circuits: 8 on stationary platen with Venturi nozzles and pressure switches • Pneumatic mold valve control: 2-fold FESTO, up to 16 bar • Mold heating: 16 control zones, max heating power 25 kW • Nozzle radius: 15 mm • Nozzle bore: 4 mm • Nozzle contact stroke: approx. 405 mm • Hydraulic tank capacity: Main tank approx. 490 l, suction tank approx. 220 l • Robot interface: Euromap 67 / AN-146 • Languages: Czech and German Additional equipment • MuCell package: • Complete MuCell Basic Package • PM cold-work steel screw Ø 60 mm Nedez Dgrpjpfx Af Sedb • Hydraulic needle shut-off nozzle • Melt pressure sensor • Trexel auxiliary equipment: SII VC 30, MIK 1060 SII • Frame for two 50 L gas cylinders • Mold temperature control: 3 ENGEL flomo distributors (24 monitored circuits total) • GEKU automation with conveyor belts

Condition: ready for operation (used), Year of construction: 2016, operating hours: 33,793 h, clamping force: 4,000 kN, screw diameter: 80 mm, overall weight: 31,000 kg, product length (max.): 10,259 mm, Hydraulic injection moulding machine manufactured in 2016. This Engel Victory 3550/400 tech features a clamping force of 4000 kN and an injection unit with a screw diameter of 80 mm. It includes a fully hydraulic tiebarless clamping system and advanced automation with conveyor belts. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 3550/400 tech machine we have for sale. Contact us for further details. • Injection unit: 3550 • L/D ratio: 25 • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) • Drive system: ECODRIVE SHV3-HSI, 2 pump systems, accumulator • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 282 kW • Clamping system: Tiebarless, fully hydraulic ENGEL clamping system • Centering: 160 mm • Ejector stroke: 250 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen • Vacuum/compressed air circuits: 4 on moving platen with Venturi nozzle and pressure switch Ndsdpfx Afsz Dgpbe Sjb • Pneumatic valve: 2/2-way valve R 1/4" on stationary platen • Pneumatic mold valve control: 4-fold FESTO, up to 16 bar • Mold heating: 32 control zones, max heating power 43 kW • Screw drive: Electromotoric, speed-controlled, max 150 rpm, rated power 47 kW, torque 3700 Nm • Nozzle radius: 15 mm • Nozzle bore: 6 mm • Nozzle contact force: approx. 150 kN • Metering stroke: 390 mm • MuCell equipment: MuCell Advanced Package; cylinder L/D 24/25; MuCell G25 screw Ø 80 mm; gas injector bore; melt pressure sensor; RS-485 interface to SCF gas plant; emergency stop connection • Mold temperature control: 3 ENGEL flomo distributors with 8 zones each (24 monitored circuits total) • Hydraulic tank capacity: Main tank approx. 690 l; suction tank approx. 290 l • Robot interface: Euromap 67 / AN-146 • Languages: Czech and German Additional equipment • GEKU automation with conveyor belts (included)

Year of construction: 2021, condition: used, Clamping force: 2700kN, injection volume: 500cm³, injection pressure: 3500bar, EUROMAP size: 2700-1750, rated power: 22kW, weight: approx. 10.7t, nozzle contact force: 58kN, total current: 138A, upstream fuse: 160A, max. short-circuit current: 10kA, enclosure type (UL): 1, hydraulic motor operating hours: 730h, hydraulic pump (clamping force): 65h, operating system active: 3,360h, was regularly maintained, is in well-maintained condition, an on-site inspection is possible. Nodpfx Ajz Ekdlef Sedb

Condition: excellent (used), Year of construction: 2011, operating hours: 80,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 40 mm, displacement volume: 201 cm³, total length: 5,245 mm, total width: 1,525 mm, total height: 2,300 mm, overall weight: 7,200 kg, input frequency: 50 Hz, input voltage: 400 V, The machine comes from the current series production of a plastics processor and, according to the previous owner, is fully functional. An inspection at the production facility is possible after scheduling an appointment. Key data (according to manufacturer's specifications ENGEL) • Clamping force 1,200 kN (120 t), tie-barless clamping unit • Platen dimensions 790 × 790 mm (Wide Platen), minimum tool size 350 × 350 mm • Tool installation height min. 400 mm, opening stroke 506 mm, max. platen distance 900 mm • Ejector 130 mm stroke, 39.8 kN • Injection unit 1 (330H, horizontal): screw Ø 40 mm, displacement volume 201 cm³, specific injection pressure 1,221 bar / increased 1,667 bar • Injection unit 2 (80W, angled position): displacement volume 38 cm³ (screw Ø 22 mm) or 49 cm³ (Ø 25 mm) [CHECK 09/25: which screw] • Hydraulics: pump drive 30 kW, oil capacity 300 l • Connection 3 × 400 V, 50 Hz, 139 kW / 220 A • Control system ENGEL CC 200 [CHECK 09/25] • Operating hours 87,300 h (as of 09/2026); plasticizing cylinder Ø 40 mm from 2021 with 20,300 h (according to the previous owner) Your advantages • Tie-barless: The tool space is free from tie bars. Large and bulky tools with core pulls can be accommodated, for which a larger clamping force class would often be required in tie-bar machines. • Short setup times: Tools are installed from the side without tie-bar removal. • Automation: Robots travel horizontally into the tool space – smaller cell, lower hall height, shorter cycles. Ndodpfx Aez Eimfjf Sjb • Tool-friendly: Platen parallelism via the patented ENGEL Flex-Link system (according to the manufacturer). • Hydraulic connections for core pulls, parallel movements programmable (according to the previous owner) – for tools with sliders, undercuts and thread cores. • Combi version with space for a rotary table or indexing plate (according to the manufacturer). • Main injection unit with a newer plasticizing cylinder (2021). • Second injection unit, according to the previous owner, was not used in operation, therefore minimal wear. [CHECK 09/25: unit available + free injection test] Typical applications 2K hard/soft and two-color: handles with TPE zone, housings with molded-in seal, switches and operating elements, connectors with seal, rollers with soft tread, closures with sealing lip, cable glands, medical components, two-color design parts. Single-component: technical precision parts and parts with inserts. Scope of supply • Injection molding machine as described [CHECK 09/25: with both injection units] • ENGEL data sheet, layout plan, platen drawing Not included in the scope of supply: the peripherals visible in the photos (removal/automation with protective enclosure, temperature control units, material handling and drying, mobile switch cabinet) and tools. Terms and conditions • Price on request • Available presumably from week 48/2026 • Payment 100% advance payment • Transport throughout Europe on request Note: The technical specifications are based on the manufacturer's documentation and the information provided by the previous owner. They are for informational purposes only and do not constitute an agreement on the condition or a warranty within the meaning of §§ 434, 443 BGB. We will confirm individual values during the inspection or upon request. Offer subject to change, prior sale reserved.

Condition: used, Year of construction: 2005, operating hours: 124,424 h, functionality: fully functional, machine/vehicle number: 155134, clamping force: 1,500 kN, total length: 5,196 mm, total width: 1,704 mm, total height: 2,189 mm, overall weight: 9,500 kg, Equipment: documentation/manual, Technical condition: operational, used until the end of its production run. Regularly serviced and maintained. This machine is ideally suited for the production of plastic components. It features a robust design from a reputable manufacturer, ensuring reliable and precise operation. Additional information: Ndodpfoz Eiafex Af Sjb The machine can be viewed by prior appointment. Technical documentation is available. Assistance with arranging loading is provided. Price: 35,000 PLN net / the price includes an ENGEL ERC 13/1-F robot, serial no. 155243, manufactured in 2005, installed on the machine.