Condition: used, Year of construction: 1998, functionality: fully functional, warehouse no.: 503460 manufacturer: ARBURG type: Allrounder 1200 TS 400-150 controller: year of construction: 1998 clamping force: 400 kN min. mould height: 250 mm max. open daylight: 550 mm opening stroke: 300 mm round table diameter: 1200 mm screw diameter: 25 mm swept volume: 54 ccm injection pressure: 2500 bar equipment included: screen text german CEE-socket 16A rotary table Anti vibration mounts Godpfex Eyynsx Ag Dsuk Schuko-socket 10A measures of machine l x w x h: 4.1m x 1.75m x 2.6m total weight: 8000KG

Condition: used, Year of construction: 2005, Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM350/1900 C2 Year of Manufacture: 2005 Clamping Force: 3,500 kN Mold Opening Force: 220 kN Moving Platen Drive Force: open: 105 kN close: 95 kN Mounting Plate (H x V): 1,060 x 1,095 mm Clear Span (H x V): 710 x 710 mm Mold Opening Stroke: 920 mm Minimum Mold Height: 380 mm Opening Width: 1,300 mm Ejector Stroke: 250 mm Ejector Force forward/backward: 95 / 48 kN Pump Motor: 75 kW Installed Heating Capacity: 30 kW Barrel Heating Zones: 6 Dry Cycle Rate: 1,550 1/h Oil Capacity: 720 ltr. Dimensions and Weight: Net Weight with Control Cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Max. Mold Weight: 4,780 kg Injection Unit: Shot Capacity: 1900 Screw Diameter: 70 mm Injection Pressure: 1,778 bar Stroke Volume: 1,047 cm3 Shot Weight for PS: 953 g Injection Flow Rate: 527 cm3/s Screw Speed Standard / Option: 285/349 rpm Screw Speed Standard or Level 1: 95 PS Screw Speed Option or Level 2: 117 PS Godpfx Aoxu Uvaog Djuk Nozzle Contact Force: 82 kN Fully Hydraulic 2-Platen Clamping System PV Control for Injection Unit MC4 32-bit Microprocessor Control Integrated Operator Panel with TFT Color Display and 3.5-inch Floppy Disk Drive for Data Backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with shut-off valve and open nozzle Nozzle Radius: 15.00 mm Nozzle Bore: 6.00 mm 101225

Condition: used, Year of construction: 2000, Engel ES 330/110HL-V (2000) Clamping force: 110 t Screw diameter : 35 mm Distance between tie bars : 730 x 420 mm Gujdpfx Aoxqd D Eeg Dek Shot weight : 75 gc Size of mould platen: approx. 730 × 600 mm (H × V) Minimum mould height: 250 mm Maximum daylight opening: 750 mm Opening stroke: 500 mm Machine weight: 5900 kg

Year of construction: 2011, condition: ready for operation (used), This Husky Hypet 120 was manufactured in 2011. A PET preform injection moulding machine with a clamp force of 1,200 kN and tie-bar spacing of 500 × 500 mm. It features a CNC control system and an electric injection system, ideal for high-volume production of PET preforms for bottles. Consider the opportunity to buy this Husky Hypet 120. Contact us for more information. Application Types Godpfsx Enkhex Ag Deuk Injection Moulding

Year of construction: 1993, condition: ready for operation (used), Some old injection molding machines from Arburg, Demag and Stübbe are available. 1) Arburg 470C 1300-575, year of manufacture: 1993, clamping force: 1300kN, shot weight: 270g, mold installation height min./max.: 300mm/950mm, opening stroke: 650mm, tie bar spacing: 470mm/470mm, screw diameter: 50mm, core pulls: 3. 2) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 3) Demag D 150/452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 4) Demag D100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 5) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, min. mold installation height: 225mm, opening stroke: 325mm, tie bar spacing: 270mm/270mm, screw diameter: 20mm, core pulls: 1. 6) Demag D250-730 NC III, year of manufacture: 1991, clamping force: 2500kN, shot weight: 320g, mold installation height min./max.: 310mm/710mm, opening stroke: 600mm, tie bar spacing: 560mm/560mm, screw diameter: 52mm, core pulls: 1. 7) Arburg 320 850-210, year of manufacture: 1986, clamping force: 850kN, shot weight: 108g, mold installation height min./max.: 250mm/625mm, opening stroke: 375mm, tie bar spacing: 320mm/320mm, screw diameter: 35mm, core pulls: 0. On site inspection is possible. Individual sale possible. Guedox Hz Sbepfx Ag Dok

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,000 h, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 105 mm, clearance between the columns: 1,400 mm, displacement volume: 4,546 cm³, injection pressure: 1,778 bar, injection weight: 4,137 g, Clamping force: 9500 kN Injection volume: 4546 ccm Godpox Hz I Nsfx Ag Djuk

Condition: excellent (used), Year of construction: 2009, operating hours: 70,171 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 38 mm, displacement volume: 38 cm³, injection pressure: 2.06 bar, ejector force: 40,000 N, ejector stroke: 130 mm, plate length: 680 mm, plate width: 740 mm, total length: 4,400 mm, total width: 1,500 mm, total height: 2,000 mm, overall weight: 6,700 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 800 mm, Equipment: documentation/manual, warehouse no.: 503415 manufacturer: ENGEL type: VICTORY 80-90 tech controller: CC200 year of construction: 2009 operation hours: 70171 h clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 300 mm max. open daylight: 800 mm Guodpfx Agox Eyxdo Dek opening stroke: 500 mm screw diameter: 22 mm swept volume: 38 ccm injection pressure: 2060 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 1x air valve 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A mould heating 4x measures of machine l x w x h: 4.4m x 1.5m x 2m total weight: 6700KG

Condition: excellent (used), Year of construction: 2008, ARBURG A 520 A 1500-400 ALLDRIVE (36.061 h) incl. KUKA Robot (S&P 3788) Manufacture year: 2008 Operating hours: 36,061 Stunden Screw: 40 HVF mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 1000 mm Dimensions: 5100 x 1600 x 2700 mm Eeight: 7250 kg Connected load: 60 kW Guodpfx Agex Hymws Djk Accumulator, 4 x Corepuller, Robot Interface EM67, Airvalve, incl. KUKA Robot System KR 5 arc, Convejorbelt, Safety Gate etc... Price: on request contact: Mr. Ralf Schulz

Condition: good (used), Year of construction: 2005, Clamping force: 110 t Screw diameter: 35 mm Shot weight: 100 g Gusdpfx Aexqd Nbeg Dok Distance between tie bars V: 680 mm Distance between tie bars H: 740 mm Type: Horizontal Drive: Hydraulic Working hours : 54.290 h

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 96 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 153 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 50 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 9,83 x 2,90 x 2,80 m Total machine weight 43170 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR300 X: 1200 mm, servo Y: 1000/1000 mm, servo Z: 3500 mm, servo C: 0 - 90° Godpfjx Hzzcjx Ag Djuk - Conveyor - saftey guard Additional options: - 1 x air valve - 6 x pneumatic sequentional valves - 12 hotrunner controller - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate

Condition: good (used), Year of construction: 2011, operating hours: 32,000 h, functionality: fully functional, clamping force: 280 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,065 bar, total length: 3,200 mm, total width: 1,350 mm, total height: 1,850 mm, overall weight: 2,900 kg, Equipment: documentation/manual, warehouse no.: 503562 manufacturer: ENGEL Gjdpfox Eyw Hsx Ag Djuk type: Victory 200-28 Tech controller: CC200 year of construction: 2011 clamping force: 280 kN size of mould plates h x v: 500 x 400 mm min. mould height: 150 mm max. open daylight: 550 mm opening stroke: 400 mm screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor LxW: 2800mm x 350mm Discharge height: 950mm Speed: 9m/min machine incl. Handling machine incl. water flow regulator Anti vibration mounts interface for ejector plates safety interface for temperature control units Schuko-socket 10A selection unit measures of machine l x w x h: 4.4m x 1.9m x 2.1m total weight: 2900KG technical data robot-system handling type: Linear manufacture: ENGEL controller: Viper 6 year of construction: 2011 electric cabinet dimensions: 1,00m x 0,35m x 0,64m

Condition: excellent (used), Year of construction: 2014, ARBURG A 1500 T 1600-400 rotary table (29.279 h) (S&P 3786) Manufacture year: 2014 Operating hours: 29,379 Stunden Screw: 35 mm Injection pressure: 2500 bar Stroke volume: 154 cm³ Clamping Force: 150 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4600 x 1900 x 2300 mm Gsdsx Hymqjpfx Ag Douk Eeight: 11000 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 4 x Corepuller, Airvalve, Interface Colorizing, Interface Robot etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2001, Manufacturer: Engel Type: ES 650/125 HL Control: CC100 Year of Construction: 2001 Gedpfx Agovytz No Djuk Clamping force: 125 t Type: Horizontal Drive: Hydraulic Clamping unit Clamping force: 1250 kN Opening stroke: 600 mm Ejector force: 61 kN Ejector stroke: 150 mm Max. plate distance: 850 mm Minimum mold height: 250 mm Mold plates (HxV): 740 x 840 mm Max. mold size (HxV): 740 x 700 mm Bar clearance: 470 mm Injection unit (45 mm screw) Screw diameter: 45 mm L/D ratio: 20 Metering volume: 290 cm³ Screw speed: 290 min⁻¹ Plasticizing capacity: 35 g/s Injection flow rate: 180 cm³/s Injection volume: 251 cm³ Injection speed (specific): 134 cm³/s Injection pressure: 1520 bar Injection pressure (increased): 2040 bar Specific injection pressure: 1230 bar Nozzle stroke: 350 mm Nozzle force: 67 kN Heating capacity: 13.3 kW Number of heating zones: 5 Drive Pump drive power: 22 kW Oil volume - main tank: 310 l Oil volume - additional tank: 110 l

Condition: good (used), Year of construction: 2003, operating hours: 67,092 h, functionality: fully functional, clamping force: 10,000 kN, screw diameter: 120 mm, clearance between the columns: 1,120 mm, displacement volume: 5,655 cm³, ejector force: 118,000 N, ejector stroke: 300 mm, plate length: 1,690 mm, plate width: 1,960 mm, total height: 2,500 mm, overall weight: 76,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503007 manufacturer: BATTENFELD type: HM 10000-9200 controller: UNILOG B4 year of construction: 2003 operation hours: 67092 h clamping force: 10000 kN distance between tie-bars h x v: 1120 x 1400 mm size of mould plates h x v: 1960 x 1690 mm Gjdpfx Agex Eywaj Djuk min. mould height: 550 mm max. mould height: 1020 mm max. open daylight: 2120 mm opening stroke: 1100 mm screw diameter: 120 mm swept volume: 5655 ccm injection pressure: 1632 bar equipment included: screen text german complact flash drive core pulling hydraulically 4x Anti vibration mounts electric interface for handling units according to Euromap 12 interface for temperature control units increased oil cooler mould heating 16x measures of machine l x w x h: 11.6m x 2.9m x 2.5m total weight: 76500KG

Condition: excellent (used), Year of construction: 2010, ENGEL victory 200/50 Spex er/usp (24.500 h) (S&P 3785) Manufacture year: 2010 Operating hours: 24,500 Stunden Screw: 25 mm Injection pressure: 2090 bar Stroke volume: 69 cm³ Clamping Force: 50 t Tie bar distance: 500 x 450 mm Gujdpox Hymkjfx Ag Dsk Mould installation height min.: 200 mm Plate distance max.: 600 mm Dimensions: 3400 1800 x 2500 mm Eeight: 2900 kg Connected load: 15 kW incl. er/usp Sprewpicker, Airvalve etc.. Price: on request contact: Mr. Ralf Schulz

Condition: like new (used), Year of construction: 2017, Equipment: documentation/manual, ENGEL Victory 750/220 SPEX – Technical data Machine designation: VICTORY 750/220 SPEX Plasticizing 1: 1. Screw diameter (standard): 45 mm 2. Available screw diameters: 40 / 45 / 50 / 55 mm 3. Screw stroke: 200 mm 4. Max. injection capacity: 318 cm3 5. Screw speed: 230 min-1 6. Recovery rate (3-zone screw): 24.2 g/s 7. Recovery rate (barrier screw): 30.1 g/s Injection 1: 1. Injection rate: 229.0 cm3/sec 2. Injection pressure (regenerative): 1760 bar 3. Injection pressure (max): 2360 bar Nozzle 1: 1. Nozzle stroke: 350 mm 2. Nozzle contact pressure: 67.2 kN Plasticizing Unit 1: Gusdpfjx Ely Tsx Ag Dsk 1. L/D ratio: 20.0 2. Heating zones incl. nozzle: 5 3. Heating wattage: 13.4 kWel Clamping unit: 1. Clamping force: 2200 kN 2. Opening stroke + cylinder tolerance: 759 mm 3. Minimum mold height: 300 mm 4. Maximum distance between platen: 1050 mm 5. Platen size horizontal × vertical: 880 × 830 mm 6. Drop out chute width: 650 mm 7. Maximum mould weight moving platen: 1500 kg 8. Maximum mould weight stationary platen: 1500 kg 9. Maximum mould weight total: 3000 kg 10. Dry cycle stroke: 250 mm 11. Dry cycle time: 2.00 s Ejector: 1. Ejector stroke: 180 mm 2. Ejector force: 80.0 kN Drive unit: 1. Oil reservoir capacity – injection unit: 330 l 2. Oil reservoir capacity – clamping unit: 210 l Oil filter / Oil cooler: 1. Cooling power standard (25 °C water inlet): 12.0 kW 2. Water consumption oil cooler 25 °C: 1.00 m3/h 3. Water consumption oil cooler 32 °C: 2.10 m3/h Machine basics: 1. Weight total (without oil): 12.2 t 2. Total power: 72.0 kW 1. Hydraulic drive variant HV1 (standard) 2. Microcomputer CC300 3. 6-fold flow regulator , 0–10 l/min

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 135 mm, displacement volume: 8,870 cm³, injection pressure: 1,640 bar, mold height (min.): 500 mm, ejector force: 180 N, ejector stroke: 300 mm, opening stroke: 1,600 mm, plate width: 1,550 mm, plate height: 1,470 mm, installation height: 1,100 mm, total length: 1,181 mm, total width: 3,200 mm, total height: 2,900 mm, overall weight: 51,000 kg, Equipment: documentation/manual, warehouse no.: 503583 manufacturer: ENGEL type: ES 16050-800 DUO controller: CC 100 year of construction: 2007 operation hours: 91691 h clamping force: 8000 kN distance between tie-bars h x v: 1170 x 1000 mm size of mould plates h x v: 1550 x 1470 mm min. mould height: 500 mm max. mould height: 1100 mm max. open daylight: 2100 mm opening stroke: 1600 mm screw diameter: 135 mm swept volume: 8870 ccm injection pressure: 1640 bar measures of machine l x w x h: 11.81m x 3.2m x 2.9m total weight: 51000KG technical data robot-system handling type: Linear manufacture: ENGEL controller: ERC 64/1-F Godpfx Agsx Eyvvs Douk year of construction: 2007 handling weight: 25 kg X axis: 1300 mm Y axis: 2200 mm Z axis: 4760 mm

Condition: excellent (used), Year of construction: 2012, ARBURG A 375 V 500-170 Turntable (S&P 3773) Manufacture year: 2012 Operating hours: 36,900 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 50 t Mould installation height min.: 170 mm Plate distance max.: 520 mm Dimensions: 3300 x 1700 x 2100 mm Eeight: 3740 kg Connected load: 11 + 11 = 22 kW Vertical injectionmoldingmachine with a 900mm turntable, 2 station 180°, incl. Option for horizontal injection into parting line incl. lifting table, Robot Interface EM67, Airvalve, EM73, Hotrunner etc...price when new approx. 170.000,- Euro Price: on request Gusdpfex Hyl Tex Ag Dok contact: Mr. Ralf Schulz

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Godpfsu Eki Sjx Ag Dsuk Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric

Condition: excellent (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 20 mm, displacement volume: 31 cm³, ejector force: 25,000 N, ejector stroke: 175 mm, total length: 4,200 mm, total width: 2,100 mm, overall weight: 4,300 kg, type of input current: three-phase, input voltage: 400 V, turntable diameter: 1,200 mm, Equipment: documentation/manual, During the inspection, it was determined that the cylinder no longer met our quality standards. This means that you have the choice between a 25, 30, or 35 mm unit. This will be purchased individually for you and is included into our offered machine price. warehouse no.: 503459 manufacturer: ARBURG type: Allrounder 1200 T 1000-170 controller: Selogica year of construction: 2013 operation hours: 22420 h technical data clamping unit clamping force: 1000 kN min. mould height: 400 mm max. open daylight: 700 mm opening stroke: 300 mm round table diameter: 1200 mm equipment included 3x control for hotrunner screen text german CEE-socket 16A complact flash drive Gedpfx Aex Eyvcjg Djuk rotary table freely programmable inputs (2) and outputs (2) machine with material hopper machine incl. water flow regulator Hydraulically actuated needle shut-off-nozzle interface EUROMAP 67 Servomotor pump drive Energy-saving drive wear-resistant injection unit measures of machine l x w x h: 4.2m x 2.1m x 0m total weight: 4300KG

Condition: new, Year of construction: 2021, Equipment: documentation/manual, Fanuc Roboshot 𝛼-S100𝑖B (2021) with Warranty! Clamping force: 100 t Tie bar distance: 460x410 mm Platen size: 660x610 mm Gsdox Elvuepfx Ag Dsuk Screw diameter: 28 mm (up to 30% glass resistant) Injection volume: 58 cm3 Injection speed: 350mm/s Type: Horizontal Drive: Electric Hours: 35 (only!) Possible to buy another screw diameter on request: 36mm or 40 mm screw More information on request. 12 months Warranty in price.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, displacement volume: 678 cm³, injection pressure: 2.007 bar, ejector force: 58,000 N, ejector stroke: 200 mm, plate length: 1,050 mm, plate width: 995 mm, installation height: 330 mm, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 1,150 mm, Equipment: documentation/manual, warehouse no.: 503393 manufacturer: KRAUSS MAFFEI type: KM 300-1400 CX controller: MC5 year of construction: 2011 Godpfxex Eyuxo Ag Dsuk clamping force: 3000 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm opening stroke: 820 mm screw diameter: 60 mm swept volume: 678 ccm injection pressure: 2007 bar equipment included screen text german CEE-socket 16A pressure accumulator for uprated injection speed Handling without safety fencing core pulling hydraulically 2x machine incl. Handling machine without material hopper Anti vibration mounts interface EUROMAP 67 interface for handling Schuko-socket 10A measures & weight measures of machine l x w x h: 6.5m x 2.2m x 2.3m total weight: 15000KG technical data robot-system handling type: Linear manufacture: Wittmann controller: W 833 year of construction: 2011 handling weight: 10 kg X axis: 900 mm Y axis: 1800 mm Z axis: 3000 mm B axis rotationn: 180 ° C axis rotation: 90 ° screen-text: deutsch total weight: 560 kg

Condition: excellent (used), Year of construction: 2014, Equipment: documentation/manual, Arburg 470C 1500 400 (2014) Golden edition Clamping force: 150 t Screw diameter: 45 mm Distance between tie bars V: 470 mm Distance between tie bars H: 470 mm Godpfx Agsx Elqre Djuk Type: Horizontal Drive: Hydraulic

Condition: good (used), Year of construction: 2008, operating hours: 26,033 h, clamping force: 4,000 kN, screw diameter: 75 mm, clearance between the columns: 710 mm, displacement volume: 1,657 cm³, injection pressure: 2,022 bar, warehouse no.: 503220 manufacturer: BATTENFELD type: TM 400-3400 controller: UNILOG B6S year of construction: 2008 operation hours: 26033 h clamping force: 4000 kN distance between tie-bars h x v: 710 x 710 mm size of mould plates h x v: 1010 x 1010 mm min. mould height: 300 mm max. mould height: 710 mm max. open daylight: 1380 mm opening stroke: 670 mm Gedpfxjx Eyufj Ag Djuk screw diameter: 75 mm swept volume: 1657 ccm injection pressure: 2022 bar equipment included: Screentext Multi-Language CEE-socket 16A core pulling hydraulically 1x air valve 1x Anti vibration mounts interface robot EUROMAP 67 interface USB Schuko-socket 16A measures of machine l x w x h: 7.2m x 1.75m x 2.42m total weight: 16400KG

Condition: excellent (used), Year of construction: 2016, HAITIAN MARS II MA10000/6800 Universal ServoDrive (2016) only 17.000 hours in automatic cycle! Gjdpfx Aswtgltog Dsuk Main Technical Parameters: Clamping force: 10,000 kN Opening stroke: 1220 mm Minimum mould height: 500 mm Maximum mould height: 1160 mm Daylight between platens: 2380 mm Distance between tie bars: 1160 x 1160 mm Clamping platen size: 1650 x 1700 mm Screw diameter: 90 mm L/D ratio: 24.4 mm/mm Shot volume: 2721 ccm Shot weight (PE): 1986 g Injection rate: 544 g/s Max injection pressure: 2280 bar Machine dimensions: 12.5 x 2.49 x 2.75 m Machine weight: 50.000 kg Equipment and Features: 423 – Proportional valve for injection (Rexroth) S01 – 8x hydraulic core pullers (4x fixed platen, 4x moving platen) with servo motor 432 – 8x core relief 662E – 16x integrated hot runners 623 – Acoustic alarm 237C – Safety locking force sensor 430C – 8x pneumatic cascade control Barrel and screw designed for processing 30% glass-filled materials 419A – Parallel movement: opening/ejector or opening/core 667 – 6x freely programmable inputs/outputs Flow meter with 6 tubes + hoses + cable trays + valves + filters + nozzles + labor, all per Lamky specification (Stäubli quick couplings) Total sockets: 4x230V/16A, 2x400V/16A, 4x400V/32A Centering ring diameter (fixed and moving side): 250 mm 8x pressure gauges for core puller circuits 409A – 8x pneumatic valves (8 mm, 3/2), 4x fixed, 4x moving side E65 – Interface for temperature controller (4 zones) 236 – Automatic ejector bar retraction (operator side)