Condition: excellent (used), Year of construction: 1999, Engel ES 4450/600HL Clamping force 600 t Year of manufacture 1999 Screw diameter 90 mm PVC cylinder with additional screw For PP, PE, etc. Injection volume 2480 cm³ Clamping plate size (horiz./vert.): 1480x1300 mm Minimum mold installation height 500 mm Rjdpfxexxcyus Ab Isr

Condition: excellent (used), Year of construction: 1997, Engel ES 2550/500 KG Clamping force: 500 tons Year of manufacture: 1997 Redpfx Ajyl S Ehjb Ior Tie bar spacing: 84x84 cm Screw diameter: 80 mm Injection weight: 1402 g Minimum-maximum mould height: 250 mm – 850 mm Machine weight: 25,500 kg

Condition: excellent (used), Year of construction: 1997, Engel ES 2550/500 KG Clamping force: 500 tons Year of manufacture: 1997 Distance between tie bars: 84x84 cm Screw diameter: 70 mm Shot weight: 1230 g Rodpfx Abeyl S Ens Ier Mould height (min-max): 250 mm – 850 mm Machine weight: 25,500 kg

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) Rjdjyxdwdjpfx Ab Ier • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Rjdsyynr Iepfx Ab Ier Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz Rsdpfx Aeyynrnsb Ier

Condition: excellent (used), Year of construction: 2016, ARBURG A 470 H 1000-170 HIDRIVE (32.000 h) (S&P 3796) Manufacture year: 2016 Operating hours: 32,000 Stunden Screw: 30 mm Injection pressure: 2000 bar Stroke volume: 85 cm³ Clamping Force: 100 t Redpfx Asyynrhsb Ijr Tie bar distance: 470 x 470 mm Mould installation height min.: 250 mm Plate distance max.: 850 mm Dimensions: 4100 x 1700 x 2400 mm Eeight: 5030 kg Connected load: 21 kW Accu, Robot Interface EM67, EM73, Airvalve Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2012, ARBURG A 375 V 500-170 Turntable (S&P 3773) Manufacture year: 2012 Operating hours: 36,900 Stunden Rjdsyynq Dspfx Ab Ior Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 50 t Mould installation height min.: 170 mm Plate distance max.: 520 mm Dimensions: 3300 x 1700 x 2100 mm Eeight: 3740 kg Connected load: 11 + 11 = 22 kW Vertical injectionmoldingmachine with a 900mm turntable, 2 station 180°, incl. Option for horizontal injection into parting line incl. lifting table, Robot Interface EM67, Airvalve, EM73, Hotrunner etc...price when new approx. 170.000,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Redpfsyym Saox Ab Isr

Condition: good (used), 1x used Arburg 370U 500-170 With Multilift Immediately available! Rjdpfxoyym R Ns Ab Ior

Condition: good (used), Year of construction: 2002, Selling this machine, immediately available. For further details, see the pictures. Redpfx Abeyym Rpo Ier

Condition: like new (used), operating hours: 57,410 h, Plastic injection moulding machine - without robot. Clamping unit 35/320 Available KW 35 -2025 Year: 2008 Operating hours: 125433 Pump operating hours: 57410 Clamping Force [kN]: 350/350 Rodpfx Abswxb Dbe Ier Max. mould opening stroke [mm]: 350 Mould height Min./WA211 [mm]: 180/230/280 Daylight between platens max./extended [mm]: 530/580/630 Mould platen size (HxV) [mm]: 460x450 Distance between tie bars (HxV) [mm]: 320x320 Min. permissible mould diameter (k) [mm]: 160 Max mould weight / moving platen [kg]: 440/330 Ejector stroke standard/extended [mm]: 100 Ejection / Retraction force [kN]: 33/13 Injection unit 35 Screw diameter [mm]: 22 L/D ratio: 20 Specific injection pressure (up to 400°C) [bar]: 1570 Cylinder head volume, max. [cm³]: 34 Max. shot weight (PS, PE*) [g]: 30 Net weight (without oil) [~kg]: 2620

Condition: good (used), Year of construction: 2004, VC330-80 plus Year: 2004 Clamping force : 800kn Injection Unit 330 Control unit CC200 A01 Screw D40 Working hours 91112 1x corepull 4x digital input 4x digital output 1x signe pahse socket Rodpfjvdqbhjx Ab Isr 1x trhee phase socket NEW PUMP

Condition: used, Year of construction: 2003, Arburg injection moulding machine available for immediate purchase. Machine is still in operation. Viewing possible upon appointment. Full technical details in the attached documents/pictures. Clamping force (max.): 3200 kN Mold opening force (max.): 130 kN Opening stroke (max.): 700 mm Ejector force (max.): 100 kN Ejector stroke (max.): 250 mm Rsdpfsyw Snbsx Ab Isr Screw diameter (mm): 60/70/80 Effective screw length (L/D): 23/20/17.5 Shot volume (cm³): 792/1078/1407 Injection pressure (bar): 2500/2000/1530 Injection flow (cm³/s): 224/306/400 Distance between platens (max.):: 1000–1400 mm

Condition: excellent (used), Year of construction: 2001, KraussMaffei KM 200-1400 CX Year of construction 2001 Control MC4 Operating hours: approx. 16,700h (pump) Screw diameter 70 mm Rodpfoyyd Sqex Ab Ijr Fuel weight: approx. 841gr./hp Spar distance 560 x 560mm Machine weight: 10500kg Extras: Core pulls Handling interface Machine is free! Subject to alterations, prior sale and errors excepted!

Condition: excellent (used), Year of construction: 2016, operating hours: 34,000 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 30 mm, clearance between the columns: 320 mm, displacement volume: 85 cm³, injection pressure: 2,000 bar, injection weight: 77 g, ejector force: 30,000 N, Arburg 320C 500-170 Year of manufacture: 2016 Control system: Selogica Operating hours: approx. 34,000h (pump) Screw diameter: 30 mm Shot weight: approx. 77 g/PS Tie bar spacing: 320 x 320 mm Rodpfx Absyyd Ske Ijr Extras: Core pull Color dosing interface Euromap 67 handling interface Air valve Machine weight: 2,200 kg Machines are available! Subject to changes, prior sale, and errors!

Condition: excellent (used), Year of construction: 2016, operating hours: 45,000 h, functionality: fully functional, clamping force: 600 kN, clearance between the columns: 310 mm, ejector stroke: 110 mm, opening stroke: 270 mm, total length: 3,980 mm, total width: 1,170 mm, total height: 1,870 mm, heating capacity: 6.25 kW (8.50 HP), Haitian MA600 II/130 eco Year of manufacture: 2016 Clamping force: 60 t Immediately ready for operation. Machines are available! Redpfx Abeyyd Sds Ijr Subject to changes, prior sale, and errors!

Condition: excellent (used), Year of construction: 2015, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 extra equipment: Rjdpjx Tdwyjfx Ab Ior 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: excellent (used), Year of construction: 2004, operating hours: 30,665 h, functionality: fully functional, machine/vehicle number: 196184, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, Equipment: documentation/manual, We are offering the following well-maintained used injection moulding machine as part of our injection moulding machinery trade. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a major dealer of used injection moulding machines for more than 25 years. Current note – Tax information and advantage for used machines: From 01.07.2025, used machines will also be eligible for special depreciation of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can apply the same depreciation rates as for a new machine. Key term: Growth booster, (§ 7 paragraph 2 EStG-E) Used injection moulding machine with 2 additional available injection units (25 and 35 mm) – 50 mm injection unit currently installed. See document for download. Manufacturer: Arburg Type: 470C 1500-350 Year of manufacture: 11/2004 Machine number: 196184 Control system: Selogica Operating hours: 30,665 h Regular maintenance by the manufacturer Clamping unit: - Clamping force: 1500 kN / 150 tons - Tie bar distance: 470 x 470 mm - Platen size: 650 x 650 mm Rjdpfsw Rm Hdjx Ab Isr - Ejector stroke: 175 mm - Opening stroke: 500 mm - Min. mould height: 250 mm - Max. daylight: 750 mm Injection unit 50 mm (highly wear-resistant): - Shot volume: 392 cm³ - Shot weight: 359 g - Screw diameter: 50 mm - Injection pressure: 1670 bar Extras: - 2 additional injection units: 25 mm and 30 mm - 1x core pull - Conveyor belt in machine bed - Handling interface - Selector unit - 2 x air blow-off - Accumulator for fast injection - Electrical interface for pneumatic shut-off nozzle - Technology level 2 servo-regulated pumps - 9 electrically regulated heating zones - Interface for WKT temperature control device - Coloring device interface - Equipment package - Extended monitoring, advanced movement functions, production control, optimization/operator aids, quality assurance, and documentation Visible peripherals not explicitly named are not included in delivery. - Available immediately from our Hanover warehouse, free loaded or delivery on request for a freight charge - Function tested (guaranteed function up to first commissioning)

Condition: excellent (used), Year of construction: 2012, operating hours: 40,226 h, functionality: fully functional, machine/vehicle number: 221240, screw diameter: 40 mm, injection weight: 172 g, Here we offer, as a dealer in injection moulding machines, the following well-maintained pre-owned injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from year of manufacture 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Type: 370S 700-290 with equipment for vertical injection Serial number: 221240 Year of manufacture: 2012 Operating hours: 40,226 h Control system: Selogica Dimensions (L/W/H): 3.92 x 1.45 x 2.02 m Weight: 3,300 kg Fully functional Condition: very well maintained Extras: - Device for vertical injection - 1 core pull circuit - Additional heating band connection - 5 freely adjustable manual cooling circuits - Air valve connection controllable via Selogica - Equipment packages: quality assurance, documentation, extended monitoring, production control, etc. - Flexible part chute - Screw highly wear-resistant - CF drive - Complete documentation and software (on CF card) - German language - Single ownership – origin Germany - Regular maintenance by the manufacturer and previous owner Injection unit: Screw diameter: 40 mm Shot weight: 172 g/PS Injection pressure: 1,530 bar Shot volume: 188 ccm Clamping unit: Clamping force: 70 t / 700 kN Tie bar spacing: 370 x 370 mm Rjdpswg Tt Rofx Ab Ier Mounting plates: 510 x 510 mm Tool installation height: 200 mm Max. platen distance: 600 mm Ejector stroke / force: 125 mm / 30 kN Clamping unit: hydraulic Motor power: 15 kW Heating capacity: 7.7 kW – 5 zones Total connected load: 23 kW Warranty: Warranty valid until first commissioning Loading/Shipping: Free loading onto buyer's truck or free delivery within Germany (shipping costs apply) Immediately available ex our warehouse in Hanover, Germany Further images to follow Information regarding our machines and company: - We only sell machines which we have acquired from active production, available at our warehouse in Hanover - All offered machines are inspected and tested prior to dismantling - We do NOT sell insolvency goods and we are NOT brokers dealing in third-party property - All offered machines come from successful companies where maintenance and care are understood as a matter of course - All machines offered are available for inspection at our warehouse

Condition: excellent (used), Year of construction: 2006, operating hours: 69,000 h, functionality: fully functional, machine/vehicle number: 163769, Here we offer a permanent maintained injection molding machine. from the following machine we have other machines of the same type and same year in stock also with Geiger Robot Manufacturer Engel Type Victory 200/80 Tech year of construction: 2006 Control system: CC 200 Extras -installed Languages: German Englisch -25 mm (wear and corrosion protected) - control CC200 - enlarged clamping plates (B plates) - minimum installation height 250 mm - maximum platen distance 700 mm - quality switch / PD protocol + graphics - 5 x CEE 400 V / 3 x Schuko 230 V - 4 freely programmable inputs and outputs - handling interface Euromap 12 - Host computer interface Engel EMS - Geiger EA Mini 2001 SLI (#156686 0504 4417 / year 2005) Redpfx Abem Nclvo Ier - without material hopper or conveyor Clamping unit clamping force: 80 to./ 800 kN tie bar dimension: tie bar-less clamping platens: 730 x 600 (hxv) platen distance: 700 mm max installation height: 250 mm min. opening stroke: 450 mm Injection unit screw diameter 25 mm stroke volume: 69 ccm injection pressure: 2090 bar / 2400 increased Weight: 5,200 kg. dimensions: 4,00 mtr. x 1,40 mtr. x 2,00 mtr LxWxH from our warehouse Hannover /Germany free loading on truck of the buyer or free delivery against freight reimbursement Viewing under electric power possible functional guarantee

Condition: ready for operation (used), Year of construction: 2024, clamping force: 100 kN, screw diameter: 14 mm, injection weight: 6 g, overall weight: 450 kg, Hydraulic injection moulding machine manufactured in 2024. This BOY XS 161 features a clamping force of 100 kN and a maximum injection pressure of 2298 bar. It includes a 14 mm screw diameter and a theoretical shot volume of 6.1 cm³. If you are looking to get high-quality injection moulding capabilities, consider the BOY XS 161 machine we have for sale. Contact us for further details. • Control system: Procan ALPHA 4, 15" multi-touch HMI • Injection pressure: max. 2298 bar (with 14 mm screw) • Theoretical shot volume: 6.1 cm3 • Distance between tie bars: 160 mm (205 mm diagonal) • Max. daylight between platen: 250 mm • Adjustable opening stroke: 150 mm • Min. mold height: 100 mm (optional 50 mm) • Hydraulic system pressure: 300 bar • Oil tank capacity: 28 liters • Installed total power: 6.1 kW Rsdpfx Aeyw I Azsb Ijr • Electrical supply: 400 V 3~ N, 50/60 Hz, 12.4 A • Machine dimensions (L x W x H): 1485 x 526 x 1380 mm • Footprint: 0.78 m2 • Safety guarding: Fully enclosed clamping zone with clear polycarbonate sliding safety gate and electrical interlock • Peripheral interfaces: Pneumatic and cooling water connectors on the non-operator side • Status indicators: 3-tier LED signal tower (Red/Yellow/Green) Additional equipment (accessories) • 3-liter gravity material hopper • Red 16A CEE power plug • Heavy-duty wooden transport/leveling base

Year of construction: 2022, condition: ready for operation (used), 4 units Coloring Device / Dosing System for Plastic Granulate – Hydracolor 150-S/450 (TBH) For sale are a total of 4 dosing systems / coloring devices suitable for use in plastics processing or injection molding operations. Manufacturer: TBH Plastic Technology Model: Hydracolor 150-S/450 Redpfeyybtxjx Ab Isr Type: Dosing system for granulate / masterbatch These units are designed for precise dosing and homogeneous blending of color masterbatch or additives directly into the material flow, ensuring reproducible coloration throughout the production process. Ideal for: - Injection molding operations - Plastics processing - Series production with consistent quality Features & Equipment: - Dosing system for plastic granulate - Hydracolor coloring unit - Microprocessor control - Connection cable / control unit - Easy integration into existing systems - Consistent and reproducible dosing - Robust industrial-grade construction Quantity: Total of 4 units available: - 1 unused unit (new) - 3 used units, good condition Condition: - Used devices fully functional, taken from running production - Normal signs of use present - Unused device is new Special Features: - Ready for immediate use - Compact design, mountable directly on injection molding machines - Proven system in industrial applications - Machine location: Northern Bavaria _____ Our terms and conditions apply. The seller is not liable for typographical or data transmission errors. All details and images were provided by the owner and released for publication. The optical condition of the offered items corresponds to age and the images shown. Technology and wear of the offered items are appropriate to their age. Used machines are sold exclusively to commercial buyers without warranty.

Condition: used, Year of construction: 2011, USED PLASTIC INJECTION MOULDING MACHINE Manufacturer: ENGEL, Model: Insert 200H/70 Configuration: Rotary table Clamping force: 70 t Year of manufacture: 2011 - well maintained, serviced, no oil leakage. Commissioning date: 09.06.2011 Operating hours: 57,077 h Injection unit: 30 mm Control system: CC200 Weight: 6,200 kg Special features: - Light curtain - Freely programmable inputs and outputs - 9 freely programmable inputs can be programmed station-dependent - 9 freely programmable outputs - Handling interface: Euromap 67 - Charge amplifier for pressure-dependent holding pressure switchover, including corresponding graphical pages - 3 potential-free monitoring inputs for monitoring of peripheral equipment such as temperature control units - Euromap 63 interface for integration into machine data acquisition systems - Hot runner control / shut-off nozzle control Redpfeyx St Tex Ab Ijr

Condition: used, Year of construction: 2008, screw size 18 mm closing pressure 250 kN opening stroke max. 350 mm mould space 200 mm control Selogica ARBURG ALLROUNDER 270 S 250-70 – Injection Molding Machine – Year ofManufacture: 2008 – Excellent Condition A reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection molding machine, manufactured in 2008, is for sale. The machine is ideal for producing precise plastic parts in small to medium-volume production runs and impresses with its robust construction and the renowned ARBURG quality “Made in Germany.” Technical Highlights: - Clamping force: 250 kN - Injection unit: Size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Column spacing: approx. 270 x 270 mm - Platen size: approx. 380 x 380 mm - Connected load: 53 kW Electrical specifications: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V Rsdpfx Abjywzv Ie Ier - Total current consumption: 89 A Additional information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term availability of spare parts guaranteed Viewing available by appointment. Additional information, photos, or videos available upon request.