Condition: new, Number of machnines -
Loading meters, approx. -
Total weight, approx. -
Assembly line consisting of:
Bllw3uzq
Item 1.0 / 0610005
RU-CBM 4000 work table
with running rail extended by 500mm for additional assembly
an aluminum holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD
with RU-SH special screwdriver, support table
Length 4000 mm, width 1400 mm, inclination of the working platform
manually adjustable. Holder for fitting scissors or fitting punch.
16 pieces of swiveling counter-holders for hanging the wings, completely
pneumatic
Foldable for unhindered movement of the wings on the table surface.
Device for scanning the sash fitting length for constant and
variable/central gear seat for already drilled wings, colored
Dimension recognition of the fittings.
RU-SH, special screwdriver with pneumatic depth switch on carriage
mounted, safety control, pneumatic height adjustment,
Screw feeder with automatic shutdown of the filling container
(Manual insertion for a second screw length on the special screwdriver upon
request).
RA-8, turret stop for 8 screw levels mounted on the carriage.
RA-4, turret stop for 4 different wing widths
Swivel table mounted.
Pneumatic wing measurement sensing. operated, scanning range up to 2500mm
simultaneous clamping of the scanning.
PSF - Pneumatic tensioning device for sashes.
Working height adjustable from 900 - 1000 mm.
Support table covered with felt. Running rail extended to the left by 800 mm.
Item 1.1 / 5035-1
Pneumatic swivel device of the work surface with foot valve
Item 1.2 / 0500000
Holder matched to customer punch/scissors.
For mounting a hardware punch provided by the customer or
Fitting shears (third-party manufacturer) on the sash assembly table.
Please specify make when ordering!!!
Item 1.3 / 5597-7
Driving device for RU-CBM on semicircular rails.
The castors are on the left and right of the base frame
of the table mounted.
Item 1.4 / 6354-6
3 double meters of semicircular rails 30 x 10 mm.
Item 1.5 / 0730000
RU-SBL3000/40 free-standing fitting bearing,
Length 3100 mm, depth 1250 mm, height 2200 mm,
Stand frame on the front without supports,
40 compartments, divided into 10 compartments in a row by dividers
and a continuous shelf at the top,
Compartment size: width 280 mm, height 150 mm.
Item 2.0 / 10603200
RU-CSA-SMB aluminum holder screwing machine with automatic
Screw feeding and manual feeding of the aluminum holders from one
traveling box with pneumatic positioning device,
Screwdriver with depth cut-off with 4-fold turret stop.
Pneumatic adjustment device in the y direction against 2 pieces 6-fold
Revolver attacks. Feed container for manual feeding of rotary holders
or clip holder in square shape 18.5 x 18.5.
The holder is manually pushed into a channel in the box and with
positioned in front of the screwdriver mouthpiece using a pneumatically
operated slide.
Profile depth max. 150 mm, screw spacing in the y direction max. 120 mm.
Item 3.0 / 614-601
RU-S48-A6-350 column slewing crane
for chain hoist, with 6 m aluminum boom
Version with column, smooth-running boom
and sliding chassis for swivel and trolley travel
manually by pulling and pushing the load
Condition: ready for operation (used), Year of construction: 1988, Machine for the insertion of strike plates, used in the production of front doors.
8d2dljkxxk
Condition: new, 0 ja, freitstehend
Working width 3000 mm
0 ja
RUCHSER wing assembly table RU-BM-3000 year of manufacture 2022
-----
The Ruchser sash fitting center enables efficient production
post-economic aspects. Thought through to the last detail, the
system maximum ease of use.
Important advantages for you:
Modular system, according to your wishes and requirements
Cafx3igppk
Grand piano assembly table put together
Easy to use, even for inexperienced workers
Equipment demonstration machine, alternative/optional equipment on request!
Item 1.0: Item no. : 0610000
RU-BM-3000, sash assembly table, for sashes up to a maximum height of 2500 mm
with RU-SH, special screwdriver length 3000 mm, width 1400 mm, incline of
Working platform manually adjustable.
Holder for hardware scissors or hardware punch.
10 pieces swiveling commuters to hang the
Wing, completely pneumatically foldable to
unimpeded movement of the wings on the
tabletop.
Device for scanning the sash fitting length
for a constant and variable/central grip position
and any handle seat height for already pre-drilled
Sashes, colored measurement recognition for the fittings.
Commuter height at a stop optionally set to 50
or 60 mm adjustable.
RU-SH, special screwdriver with pneumatic
Depth switch mounted on trolley,
safety control, pneumatic height adjustment,
Screw feeder with
automatic shutdown of the filling container
Manual insertion for a second screw length
on the special screwdriver, accessories.
RA-8, turret stop for 8 screw planes
mounted on the carriage.
RA-4 commuter rail in depth manual
adjustable to the left and right one each
4-fold revolver stop.
PSF - Pneumatic clamping device for wings
against the side stops.
Working height adjustable from 900 - 1000 mm.
Please also specify whether felt, sliding or brushes
perform as a requirement.
Item 1.1: Item no. : 0500000
Bracket matched to customer punch/-
installing a customer-supplied
Fitting punch or fitting scissors (other brand)
at the wing assembly table. Please specify make when ordering !!!
Note: A Somatec punch is attached to this demonstration table.
This can be purchased as an option.
Otherwise, the punch must be provided by the customer (by the hardware
manufacturer)
Item 1.2: Item no. : 6309
RU-BM-... Siegenia fitting discontinued
Alternatively also adjustable to other fittings!
Item 1.3: Item no. : 0710000
RU-SBL3000/30 free-standing fitting bearing,
length 3100 mm, depth 1250 mm, height 2050 mm,
stand frame on the front without supports,
30 compartments, 10 pieces each in a row
Divided partitions and a continuous shelf
top, size of the compartments: width 280 mm, height 150 mm.
Item 99.1: Packing on a pallet
-----
Total price in this version: on request!
See attached video and PDF brochure.
(Technical information according to the manufacturer - without guarantee!)
Machineseeker certifies selected sellers with the Machineseeker trust seal. Before approval, a standardized and comprehensive check is carried out by experienced Machineseeker staff.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for you as buyer?
The Machineseeker trust seal enables you, as a buyer, to identify trustworthy sellers who are very likely to do honest and righteous business, without having to do your own investigation.
Disagreements may of course still arise during the purchasing process. Machineseeker is not liable for legal violations committed by buyers or sellers active on Machineseeker.