Used automatic punching machines for sale (168)

Condition: used, Year of construction: 1991, functionality: fully functional, conveyor belt width: 500 mm, pressing force: 400 t, DGUV certified until: 07/2027, year of last overhaul: 2017, sheet thickness steel (max.): 7 mm, Edelhoff DARRW 2/400 – 400-ton pressing system with ALBA strip feeding system For sale is a complete mechanical pressing system, manufactured by Gebr. Edelhoff, type DARRW 2/400, manufactured in 06/1991, with an ALBA strip feeding system, coil unwinder, straightening unit, roller feeder, modernized Siemens SIMATIC control system, UNIDOR process monitoring, and MFP Z-conveyor, manufactured in 2025. The system is installed and can be inspected and demonstrated after prior appointment. Technical data of the press: Manufacturer: Gebr. Edelhoff Werkzeugmaschinenfabrik Type: DARRW 2/400 Year of manufacture: 06/1991 Machine No.: 9131 Design: mechanical twin-column stamping press Pressing force: 400 Mp / approx. 4,000 kN Table size: 1,100 × 1,500 mm Stroke adjustment: 40–120 mm Ram adjustment: 120 mm Stroke rate: 20–80 strokes/min Motor power: 45 kW Chodpjzv Ukgsfx Aatjd Electrical system: 380 V Control system / process monitoring The machine control system has been modernized. Equipment includes: Siemens SIMATIC control system UNIDOR process/pressing force monitoring with visualization Screen-based operation Separate main control panel Additional machine-side control panel Integration of the strip feeding system into the system control Extensive switching and control technology ALBA strip feeding system Complete strip feeding system with several ALBA components, consisting of: Coil unwinder Coil holder with spreading mandrel Hold-down / guide arms ALBA straightening unit ALBA roller feeder Separate control unit for the strip feeding system Technical data of the strip processing: Strip width: max. 500 mm Material thickness: max. 7 mm Material cross-section: max. 1,800 mm² Strip speed: up to 25 m/min 2 transport rollers 8 straightening rollers Year of manufacture of ALBA components: 1991 The strip feeding system consists of several ALBA units with separate nameplates. Part removal MFP Z-conveyor Year of manufacture: 2025 Automatic part discharge from the pressing area Modernization / overhaul The pressing system underwent extensive overhaul in the years 2017–2019. The documented costs for the overhaul amounted to approximately €92,000. In addition, the system was equipped with an MFP Z-conveyor, manufactured in 2025. Inspection The press was last inspected on 07.07.2026 according to DGUV Information 209-030. Condition / Inspection The complete system is currently installed at the production site. Inspection and demonstration under production conditions are possible after prior appointment. Dismantling, relocation, and reinstallation Upon request, in addition to the machine sale, we offer the complete technical handling of the relocation: Professional dismantling of the system Preparation for loading and transport Relocation to the new production site Reinstallation and assembly at the destination Further services according to individual agreement The scope of services can be individually agreed upon and offered according to the buyer's requirements. Financing If the buyer has sufficient creditworthiness, a financing solution can be offered or arranged for the acquisition of the system. Details, term, and conditions will be determined after individual assessment and agreement. Further technical documents and information are available upon request. Technical data provided to the best of our knowledge and according to the available machine documentation or nameplates. Subject to errors and prior sale.

Condition: used, Year of construction: 1987, functionality: unexamined, pressing force: 20 t, stroke length: 38 mm, overall weight: 3,600 kg, BSTA 20 H press, with BBV 190/85 roll feed on left-hand side, Codpfx Aasw S E Tletshd Year of mfg. 1987 Adj. stroke 8 to 38 mm Nominal capacity 20 tons Max. tool loading width 420 mm For spare parts or overhaul/repairs. Sold in "as is" condition. Available immediately ex-stock. Please contact us for more information!

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1002570003, total height: 3,450 mm, ram adjustment: 80 mm, installation height: 270 mm, table height: 1,280 mm, total width: 1,700 mm, total length: 3,065 mm, drop-through hole in table: 210 mm, table length: 1,500 mm, table width: 750 mm, pressing force: 63 t, control cabinet height: 2,200 mm, control cabinet length: 1,800 mm, control cabinet width: 600 mm, stroke adjustment: 80 mm, clearance between the columns: 1,540 mm, working width: 1,500 mm, distance between side stands: 360 mm, distance between stands: 2,020 mm, overall weight: 17,000 kg, punching force: 63 t, RASTER punching system RST 630-1500 DH with soundproof enclosure and tool monitoring. The machine is in good condition. Stroke rate: 30 - 700 1/min. Operated in single-shift operation. The machine can be inspected under power. Price on request. Cedeyyppbepfx Aatehd

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1002650004, total height: 3,170 mm, ram adjustment: 60 mm, installation height: 270 mm, table height: 1,300 mm, total width: 2,875 mm, total length: 2,875 mm, drop-through hole in table: 150 mm, table length: 1,250 mm, table width: 550 mm, pressing force: 50 t, control cabinet height: 2,200 mm, control cabinet length: 1,800 mm, control cabinet width: 600 mm, stroke adjustment: 60 mm, clearance between the columns: 1,290 mm, working width: 1,250 mm, distance between side stands: 260 mm, distance between stands: 1,690 mm, overall weight: 9,900 kg, punching force: 50 t, RASTER punching system RST 500-1250 DH with soundproof cabin and tool monitoring. The machine is in good condition. Stroke rate: 50 – 800 spm. Previously operated in single-shift mode. The machine can be inspected under power. Price on request. Chodpfxjyyvgto Aatjd

Condition: good (used), Year of construction: 1991, Tool press MOSSINI 680800, manufactured in 1991, pressing force 800 t, stroke 21 mm, stroke time 128 ms, with various accessories and tools. Cjdpfxez Icdvs Aatohd

Condition: excellent (used), Complete production line for sale for manufacturing round metal rainwater drainage systems. Production starts from a sheet metal coil, then forms, stamps, and packages the products. All machines are in very good condition. The equipment is fully assembled and intended for mass production of: - Gutters - Gutter ends - Connectors - Corners - Brackets Chjdpjy I Tq Ssfx Aatod - Downpipe outlets - Elbows - Downpipes - Branch connectors (Tees) - Packaging If you are interested in the offered equipment, have any questions, or would like to receive more detailed information, please do not hesitate to contact us. We will gladly provide the full equipment list, technical specifications, additional photos, or arrange an inspection of the production line. All equipment is connected and can be inspected in operation to see the full production process.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Stamping force: 40 t Cjdo Ad H Uqjpfx Aatehd MACHINE DETAILS Manufacturer: Bruderer Type: BSTA 40 Machine type: Stamping press Length: 2,000 mm Width: 1,000 mm Height: 2,400 mm Weight: 3,000 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, punching force: 25 t, Bruderer BSTA 250-75B with BBV 190/85H Cedpfx Aozlqhmsatjhd - B-Control, year of mfg. 2006 - Tool area 750mm - Adjustable stroke 13 to 38mm - complete documentation - Machine checked, in very good condition! contact us!

Condition: used, Year of construction: 2004, pressure 80 t stroke 16 - 63 mm no. of strokes 100 - 750 /min distance between columns 970 mm dayligth (stroke and adjustment up) 380 mm column travel -side 380 mm table surface area 940 x 910 mm Chedozrpq Hopfx Aatjd hole in the table 770 x 190 mm table height over floor 1180 mm ram surface 940 x 510 mm ram adjustment 76 mm material width 203 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 37,0 kW Weight 14,50 t dimensions of the machine ca. 2,7 x 1,7 x 3,6 m with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Condition: excellent (used), Year of construction: 2008, Mossini press Servo drive Chodpsz Sz Sbefx Aatsd Pressing force 2,000 kN Stroke adjustment 20 - 100 mm Stroke rate 30 - 90 strokes/min Ram adjustment 100 mm Tool installation height 455 mm Year of manufacture 2008 Includes Kohler conveyor system.

Condition: used, BÖLLHOFF Type: 6039402 Chodpfxezgaahs Aated Control unit for RIVSET blind riveting system Operating voltage: 400V 50 Hz Rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 The system was inspected by the manufacturer and is functional. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, stroke length: 38 mm, input voltage: 400 V, punching force: 25 t, Bruderer BSTA 25USL with BBV 190/85 roll feed, - year of mfg. 2000 - Tool area 750mm Codpfx Aajzlqhyetjhd - Adjustable stroke 13 to 38mm - complete documentation - Soundproof cabin - Machine checked, in very good condition! contact us!

Condition: used, BÖLLHOFF Type: 9524-640-824-5 RIVSET Punch Rivet System with Punch Rivet Pliers Cedpfxezgaabs Aatjhd Operating voltage: 400V 50 Hz Rated current: 12A Main fuse: 35 A Control voltage: 24 V Signal voltage: 0-10 V with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 max. permissible riveting pressure: 250 bar max. permissible riveting force: 78 kN Weight of the pliers: approx. 279 kg Year of manufacture: 2012 The system was inspected by the manufacturer and is fully functional. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, BÖLLHOFF Type: 9524-640-826-7 RIVSET Punch Rivet System Csdpfx Aaozgaanetshd with Punch Rivet Pliers 9524-640-826-7 Operating voltage: 400V 50 Hz Rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 Max. permissible riveting pressure: 250 bar Max. permissible riveting force: 78 kN Weight of the pliers: approx. 195 kg The system was inspected by the manufacturer and is functional. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2007, operating hours: 19,269 h, functionality: fully functional, BSTA 41, with 2x BBV 202/120+ scrap shear complete refurbished by Bruderer Swiss in 2007, CE conversion possible Chsdpfxjzlqi Do Aatjd Contact us!

Condition: reconditioned (used), Year of construction: 1996, pressing force: 50 t, stroke length: 51 mm, Bruderer BSTA 50USL - Tool loading area 1100mm L-R - Machine under refurbishment, with new controls, Codpfx Aaozlqgijtjhd - Roll feed BBV or optionally servo feeder available Please contact us for a detailed quotation!

Condition: like new (used), Year of construction: 1998, functionality: fully functional, Thrust (ton) 800 Number of connecting rods 2 Bed size (x-y/mm) 3700 x 2200 Stroke (mm) 600 Slide adjustment (mm) 250 Distance at TDC* (mm) 1400 Strokes per minute 3-12 Codpfx Aasz Hvlwstohd Motor power (kW) 135 Accessories: moving front bolster Number of pressure pad cushions 3 Type of pressure pad cushion: pneumatic Stroke of the pressure pad cushion (mm) 200 Thrust of the pressure pad cushion (ton) 50 x 3 Prepared for 20 strokes/min *TDC: Top Dead Center

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Chsdpezil S Ijfx Aated Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, table length: 950 mm, table width: 650 mm, pressing force: 50 t, stroke length: 51 mm, Bruderer BSTA 50UL - Tool loading area 950mm L-R - Machine will be mechanically overhauled - Roll feed BBV 202/120 Please contact us for a detailed quotation! Codpfxjzkkxcj Aatjhd

Condition: good (used), functionality: fully functional, total height: 2,100 mm, total width: 1,400 mm, table length: 480 mm, table width: 450 mm, pressing force: 30 t, distance between side stands: 280 mm, year of last overhaul: 2026, Stroke: 16-40 mm Chodpjz Hk I Tsfx Aatjd Strokes per minute: 100-600

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: HT-120T, total height: 1,990 mm, total width: 800 mm, total length: 1,600 mm, pressing force: 90 t, stroke length: 80 mm, overall weight: 1,500 kg, DGUV certified until: 09/2026, Digima HT-120T 900 kN punching machine Professional hydraulic machine for punching, notching, bending, and processing steel components. Chsdpfx Ajz Arrujated The HT-120T is a high-performance hydraulic punching machine designed for intensive use in manufacturing plants, blacksmith shops, structural engineering facilities, and workshops engaged in metalworking. The machine allows for punching holes in sheets, flat bars, tubes, and profiles, as well as notching tubes, bending steel components, processing corners, and preparing parts for further assembly or production. Tube Notching The machine enables notching tubes and preparing them for further joining or assembly. Punching Holes in Tubes The HT-120T allows for punching holes in tubular elements and steel profiles. Bending Flat Bars With the appropriate tool, the machine can operate as a press for bending flat elements. Bending Angle Bars The device supports the processing of angle bars and the preparation of structural components. Processing Radius Corners The machine enables shaping corners and producing repeatable elements with a specified radius. Punching in Plates The HT-120T allows for punching round, oblong, and other shapes in steel plates and sheets. Punching in Profiles The machine is suitable for punching in angle bars, profiles, and structural components. Rounding Corners The device allows for processing the corners of parts, improving their aesthetics and preparing them for assembly. Double-Sided Edge Rounding The HT-120T enables processing edges and rounding components on both sides, depending on the tooling used. Technical Specifications: Model: HT-120T Maximum punching thickness: 20mm Maximum punching diameter: 30mm Pressing force: 900kN Throat depth: 350mm Maximum stroke: 80mm Number of strokes: 8-20 strokes/min Motor power: 5.5kW Overall dimensions: 1600x800x1990mm Machine weight: 1500kg HS Code: 8462490000

Condition: excellent (used), Year of construction: 1973, Description to follow! Chjdpfxoz Ebqvo Aatsd

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, This SCHAAL SEP 80 (Machine No. 00-1564, built 2000 at A. Schaal GmbH & Co., Salach/Württemberg, Germany) is a precision eccentric press engineered for demanding high-volume stamping work. Built around a vibration-damped O-form double-column cast frame, it delivers the rigidity and dimensional stability required for fine-blanking, progressive die stamping, and high-tolerance production runs where part quality cannot drift across the shift. This press comes equipped with the matched SCHAAL SWV 3E roll feeder, so it's ready to run as a complete coil-fed stamping line out of the gate: Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm. Further used machines by Mabu, Bruderer, Bihler and Schaal are available for sale from our stock. Manufacturer A. Schaal GmbH & Co. Werkzeug- u. Maschinenbau Type SEP 80 Year of manufacture 2000 Machine number 00-1564 CE marking Yes Press force 800 kN Adjustable stroke 8–80 mm Distance table-to-ram (max, ram down, with bolster) 310 / 355 mm Ram adjustment 80 mm Ram dimensions 500 × 400 mm Ram bore Ø 50 × 90 mm Ram keyway 30 H7 mm Table size 830 × 700 mm Bolster plate thickness 80 mm Through-hole in table 500 × 200 mm Strip pass line over table (with bolster) 120 mm ± 40 mm Chsdpszab Ibjfx Aated Total installed power 26 kW Supply voltage 3 × 400 V, 50 Hz Rated current 40 A Pre-fuse 50 A Weight 8,000 kg Feeder SCHAAL SWV 3E roll feeder Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm

Condition: used, Year of construction: 2003, Manufacturer: Haulick + Roos GmbH Type: RVD 3000-2500 Cedpfx Aezrz Dxsatehd Machine Type: High-performance stamping press Year of manufacture: 2003 Condition: used Rated pressing force: 3,000 kN Pressing force: 300 t Stroke frequency: 20–180 strokes/min Drive power: 80 kW Ram stroke: 20–160 mm Ram adjustment: 150 mm Tool installation height: max. 450 mm Maximum tool length: 2,500 mm Maximum tool width: 1,000 mm Table area: 2,450 × 1,000 mm Ram area: 2,500 × 950 mm Clamp plate opening: 2,250 × 350 mm Machine weight: approx. 46,000 kg Strip feed direction: right to left Power supply: 400 V Frequency: 50 Hz Maximum connected load: 80 kVA Maximum fuse rating: 250 A Draw cushion: not available Components of the system: Haulick + Roos high-performance stamping press RVD 3000-2500 DIMECO coil unwinder, type 23S1/D/VV Year of manufacture: 2003 Weight: 1,450 kg Maximum load capacity: 4,000 kg DIMECO roller feed, type 1681/17/BVV Year of manufacture: 2003 Weight: 540 kg ARKU straightening machine Technical data for roller feed: Strip width: 5–420 mm Strip thickness: 0.1–5 mm Maximum strip cross-section: 1,000 mm² Strip speed: up to 125 m/min Feed length: 0.1–999.9 mm Feed accuracy: ±0.1 mm Roller diameter: 100 mm Strip height adjustment: 100 mm, manual mechanical Note: The ram guide should be replaced. The system is currently still in operation and functional. A quote from the manufacturer for complete disassembly and installation of new guides is available for approximately €200,000. We will gladly provide videos of the system in operation upon request.

Condition: excellent (used), Year of construction: 2001, - No. 4 Schuler 630-ton presses - Capacity: 630 tons - Stroke: 1,300 mm - Die cushion tonnage: 24 – 160 tons - Die cushion stroke: 200 mm - Die opening (Pmi): 800 mm - Work surfaces: 2,500 x 2,100 mm Cedpfx Aszy Uvqoatjhd - Mobile press tables: No. 2 - Approach speed: 600 mm/min - Working speed (50%): 96 mm/min - Working speed (100%): 46 mm/min