Tajmac-France
Tajmac-France from Vougy:
TAJMAC-FRANCE commercialise les tours multibroches MORI-SAY, Wickman, les poupées mobiles MANURHIN K’MX et les embarreurs CUCCHI-BLT. Située au cœur de la vallée de l’Arve, elle bénéficie d’une implantation stratégique.
Toujours à l’écoute de ses clients, TAJMAC-FRANCE les accompagne durant toutes les étapes de leurs projets : De l’étude de la technologie, à la configuration machine, comprenant l’installation et la formation, suivi de la maintenance et la fourniture de pièces de rechange.
Également, en tant que vendeur de machines d’occasion (toutes marques), TAJMAC-FRANCE est un partenaire essentiel dans la revente et dans la révision de vos vieilles machines.
TAJMAC-FRANCE ne se contente pas de vos proposer uniquement des machines offrant différentes solutions productives, mais les adapte à vos impératifs de production.
Notre mission est de répondre aux exigences les plus élevées en termes de qualité, de flexibilité et de technicité.
Discover more used machines
Video Link
Current classifieds & top offers:
Machine rebuilt with : - AC spindles feed and speed motor - PLC Siemens Simatic HMI - New siemens electrical cabinet - Bar holder and its su ...
Swiss type lathes MANURHIN K'MX overhauled with : – Spindle, counter spindle, geometry and changes of all non-conforming parts. Rotating t ...
MORI-SAY TMZ 8/67, year 2016, like new, only 1 year and half production. – Cucchi-BLT bar-loader Bundle for 5 m bar long with 52 mm bar capa ...
Send inquiry to Tajmac-France:
Used machines in the categories of:
More classifieds & machinery offers:
Machine rebuilt with : - AC spindles feed and speed motor - PLC Siemens Simatic HMI - New siemens electrical cabinet - Bar holder and its support Chfqr9Xhks - 6 advance tubes - 6 c......
Swiss type lathes MANURHIN K'MX overhauled with : – Spindle, counter spindle, geometry and changes of all non-conforming parts. Rotating tool on: rear comb, front comb, end unit,......
MORI-SAY TMZ 8/67, year 2016, like new, only 1 year and half production. – Cucchi-BLT bar-loader Bundle for 5 m bar long with 52 mm bar capacity Machine with : – Hirth coupling – ......
Série n° 30 389 Machine reconstruite avec : - Moteur des avances et vitesses broches AC - PLC Siemens Simatic HMI - Armoire électrique neuve siemens - Porte barre et son support - ......
Multispindle lathe GILDEMEISTER GM 35 with spindle stop n°4901/0067 with bar loader Giovanni DMB36 year 1999 n°DBM99294 - Hydraulic pick-up - Back burring slide - 5 front spindles......
Number of spindle: 6 Max bar diameter: 20 mm Sx0Gqo Max supply length: 100 mm Spindle speed: max 6.000 rpm Multispindle cam machine for small bar capacity with high rigidity, high......
MORI-SAY TM 620 CNC lathe with digital slides and its new Cucchi-BLT bar feeder Machining of medium and large series max Ø 20 mm (Ø 24 mm) Interchangeable MORI-SAY 6/20 AC equipmen......
Number of spindle: 6 Max bar diameter: 32/42 mm Qxgfpuez Max. length of feeding: 125 mm Spindle speed: max 4.250 rpm This machine is perfect for the fabrication of medium and mass......
Number of spindle: 6 Max bar diameter: 32/42 mm Max. feeding length: 150 mm Spindle speed: max 5.000 rpm Cro9Eaq9Fr This machine combines the high productivity and robustness of t......
- Gildemeister original pneumatic pick-up - Oscillating arm of resumption passage 25 Crv2Fwxbx7 - 1 detector for drill bit breakage - Bar drop exclusion cylinder - Balluff BMC 8 - ......
The K’MX 920 CLEVER sliding headstock automatic lathe is designed for machining complex workpieces up to Ø 20 mm. The lathe is equipped as standard with two electrospindles with a......
MORI-SAY 6/32 rebuilt in standard configuration with : - 4 composite slides at stations 1-2-4-5 with independent movement - SIEMENS model S5 Simodrive motors for feed speed conditi......
- Number of spindles: 8 - Bar diameter: 22 mm - Spindle power: 15 kW - Spindle speed: 10,000 rpm - Slide units 1.1: NC-controlled X and Z axes - Slide units 1.2: NC-controlled X an......
- Chip conveyor with extractable tray - 4 cross slides pos 1,2,5,6 - AC motors for spindle speeds and feeds - New Siemens electrical cabinet Hu0Cskk - Siemens PLC 7.300 control pan......
K’MX EVO with 7 axes has been designed for machining of parts from Ø 3 to Ø 32 mm. The highlight of this series is 2 oil-cooled electrospindles (built-in motor), with a power outpu......
MORI-SAY 6/32 check over in standart configuration complete with : - 4 compound slides at stations 1-2-4-5 with independent movement - SIEMENS model S5 Simodrive motors for conditi......
MANURHIN K'MX 520 is designed for the productive machining of workpieces consisting of bars with a maximum diameter of 20 mm. The machine is equipped as standard with two electros......
Used INDEX MS 32 C tower, overhauled in 2023 Equipment: -SIR MS32P with shelves 3300 mm long, screwed rails -Counter spindle -KNOLL complete with 1 HP pump -Bar stop control -Progr......
MANURHIN K'MX 620 is designed for the productive machining of workpieces consisting of bars with a maximum diameter of 20 mm. The machine is equipped as standard with two electro-......
- Pneumatic pick-up - Pick-up brake - Axial control station 5 E2Prdwu - Oscillating pick-up arm passage 25 - 1 tool breakage detector - Bar drop cylinder - Siemens OP5 panel - IEMC......
K’MX EVO with 7 axes has been designed for machining of parts from Ø 3 to Ø 32 mm. The highlight of this series is 2 oil-cooled electrospindles (built-in motor), with a power outpu......
-10 linear axes - Ultra-powerful clamping - Rework spindle and its dedicated 9-position carriage (X4) enable you to carry out complex operations in masked time. - Spindle capacity......
Used INDEX MS 32 C lathe Equipment: -2 NCU -SIR MS32P with shelves, length 3300 mm, screwed rails -Counter spindle -KNOLL complete with 1 HP pump -Bar stop control -Programmable in......
3x MACHINES : GM20CNC YEAR : 2016 DESCRIPTION: Machine with original NC Gildemeister SIEMENS SINUMERIK CNC 840D - CN slide station 4 and 5 - CN hydraulic pick-up, advance, rotatio......