Used Indexers for sale (1,220)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 75,685 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 85 mm, travel distance Z-axis: 280 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, number of axes: 7, This 7-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. • Main spindle: D65, spindle interface AD140, ID83, max speed 6000 rpm; max power 20 kW at 100% duty cycle; C-axis; electronic synchronization between spindles • Sub spindle: 7.5" chuck interface, max speed 4500 rpm • Spindle hours: • S1 – 18914h • S2 – 661h • S3 – 3h • S4 – 29211h • S5 – 2413h • S7 – 1250h • The synchronous spindle was renewed in September 2024 • Chuck: 3-jaw KFN95/3, clamping force 480 daN, max 4000 rpm • Turrets: two turrets each with X and Z axis; tool drive on turret 6000 rpm, 3.3 kW • Rear working attachment: without quill, 5 quill positions • Coolant: 80 l/min at 8 bar and 20 l/min at 18 bar; system prepared for emulsion; coolant return at spindle end D60 (without bar feed) • Control: INDEX C200-4D based on Siemens 840D; color display 26 cm; thread cutting without compensating chuck; motor-current-based tool monitoring; internal tool management and setup dialog; extended machining cycles; parts counter and production monitoring • Power/connection data: 400 V, 50 Hz TN network; total connected load 45 kVA; rated power 38 kW; rated current 65 A; max fuse protection 100 A • Hydraulic hollow clamping cylinder D65 Additional equipment • Chip conveyor: hinged belt, discharge height 1250 mm • Bar feeder: MBL 65/3700 for spindle height 1010 mm; bar diameters up to 65 mm; bar feeder length 3700 mm; guide channel system with rolling bearings; loading rods (Ø12 mm and Ø20 mm, length 1400 mm); guide sets for 14–18 mm, 18–22 mm, 22–65 mm Ksdpfx Aszvu Rysbnodr • Workpiece unloading device for main and sub spindle with part catcher • Teleservice preparation (ISDN) with software • Machine prepared for extraction system 230 V • Working area light • Two electrical cabinet cooling units • Transformer 3 kVA Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Riveting machine, double riveting unit with rotary indexing table, DUNKES Type DN 4 Rotary table, rotary indexing table with SIEMENS control Machine No. P 81 - 5458, Year of manufacture 1982 / 2009 Clamping force 40 kN Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Overhang 190 mm Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Installation height, tool - counter-tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Mains connection 380 Volt, 50 Hz - Rotary table, indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame in relation to the rotary table - Table size Ø 295 mm for holding round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with lead screw, positioning via adjustable microswitch - Modernization of the control system and conversion of the servo drive in the rotary table in 2009 Kededzp T Nspfx Abnodr - New electrical control cabinet with Siemens Simatic Panel - Year of manufacture 2009 - Riveting time continuously programmable - Riveting pressure adjustment continuously adjustable via pressure gauge - Micrometer stop for limiting the stroke of the counter-rotating riveting units, 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed on the support disc and fixed with straight rivet pins. The counter-rotating riveting unit rivets the pin simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair companies. Or for the construction of a special machine. The riveting unit can also be easily removed and used as a conventional riveting machine by creating a suitable counter-tool.

Condition: used, centre height 160 mm chucking diameter 200 mm hollow 54 mm Kedpfxjzcgb Sj Abnedr

Condition: used, / weight 295 kg Center height: approx. 180mm dimension Length: about 480mm Width: about 450mm Height: 280mm Kdedpfx Aeykvbdobnjr Weight: 110kg

Condition: used, / weight 140 kg dimension Length: about 430mm Width: approx. 530mm Height: about 370mm Weight: 140kg Kodpozcq Hlefx Abnedr

Condition: used, centre height 250 mm weight of the machine ca. 120 kg Reversible clamp with angle scale and three-jaw chuck Dimensions: Chuck diameter 255 mm 60 mm bore Center height 250 mm Base area 350 mm x 400 mm Item Features: Our offers are used items, i.e. can Soiling, storage marks, damage, such as scratches and color defects may also be present. Ksdsy Sux Sepfx Abnjdr Errors in technical data and description reserved

Year of construction: 1987, condition: used, centre height 390 mm passage of steadyrest 220 mm chucking diameter 400 mm Kdjdpjhgw Uxofx Abnjr total power requirement / kW

Condition: used, centre height / mm weight 160 kg chucking diameter 250 mm Kdjdeymga Nepfx Abnor swiveling dividing head with three-jaw chuck from Forkardt F250 Chuck diameter: 250 mm Total weight: 160 kg

Condition: used, / weight 75 kg Center height: approx. 215mm dimension Length: about 370mm Width: about 260mm Height: approx. 340mm Chuck diameter: 190mm Ksdpfxozcq Hxe Abnodr Lining passage: 60mm Weight: 75kg NEIGHBOR

Condition: new, centre height // mm total power requirement / kW weight of the machine ca. / t required space / m Kedpfszcgfqsx Abnjdr Parts machine for lids FP1 / FP2 Condition: NEW

Condition: used, 10 pieces of carbide cutting inserts, HM cutting inserts, indexable inserts WIDIA Cutting insert with chip guide and cylindrical bore Type DNMM 150 612 TK15 Nominal size: 15 mm Cutting radius: 1.2 mm Rhombus angle: 55° Insert thickness: 6.35 mm Dimensions according to the sketch: D = 12.7 mm L10 = 15.5 mm = edge length of the rhombus S = 6.35 mm = insert thickness R = 1.2 mm = cutting radius D1 = 5.16 mm = cylindrical clamping bore Ksdpfxszugqpo Abnedr 10 pieces = 2 packaging units, each with 5 inserts There are 160 packaging units available. The price quoted refers to 2 packaging units.

Year of construction: 1988, condition: used, centre height 140 mm chucking diameter 250 mm swivelling range 90 Grad weight of the machine ca. 150 kg Kdodpfxjipyx Te Abnjr Dividing head swivable of a Heckert FU 400

Condition: new, Feldmühle indexable inserts, ceramic, new, in original packaging SPUN 120308 TPGN 160312 F TPUN 16308 SCUN 120416 Kdsdpfezuxllsx Abner SNGN 12408

Year of construction: 2000, condition: ready for operation (used), Two custom made but expandable and convertible rotary indexing tables for the soldering process are available: 1) Load capacity: approx. 10kg-15kg, mounting points: 4, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2000mm, weight: approx. 500kg, year of manufacture: approx. 2000. The battery is empty. An on site inspection is possible. Kdjdpfx Abox R Dtpener

Condition: ready for operation (used), Drilling capacity (steel): 100mm, max. pitch circle diameter: 7000mm, spindles: 2, spindle speed: 3000rpm, spindle mount: ISO 50, drill carriage stroke: 900mm, feed: 6m/min, power: 125kW. Machine dimensions X/Y/Z: approx. 13000mm/11000mm/5100mm, weight: approx. 18000kg. On-site inspection is possible. Ksdpfxevriq Ro Abnjdr

Condition: good (used), Size max: 430 x 300 mm Book thickness: max 60 mm Speed max: 6000 c/h Height: 1400 mm Width: 1600 mm Depth: 900 mm Kdsdpfxod Tnh Eo Abner Weight: 560 kg (approx.)

Condition: ready for operation (used), Year of construction: 2008, Technical informations Format Range Maximum Format: 320 x 250 mm (12.6 x 9.8 inches) Kodpjx Rw Imjfx Abnodr Minimum Format: 130 x 90 mm (5.1 x 3.5 inches) Optional: Can be configured for formats down to approximately 100 x 75 mm (3.9 x 3 inches). Book Thickness: Maximum 25 mm (0.98 inches) (depending on product specifications). Cut Forms: Angular Cut (straight index tabs) Form Cut (various shapes) Corner Rounding (optional) Corner Perforation (optional) Index Types: European/Arabic index Combined indexes Double and multiple indexes Register Cutting Depth: 25 mm (0.98 inches) Punching Axes: 1 axis (fully automatic process) Printing Capabilities: Index printing with 1 or 2 colors. Print Content: Letters and words on both printed and non-printed indexes. Performance Output: Maximum 1,500 pieces per hour (output can vary from 100 to 1,500 pcs/hour depending on product complexity and setup). Physical Specifications Dimensions (L x W x H): Approximately 3,900 x 2,700 x 2,000 mm (153.5 x 106.3 x 78.7 inches) Weight: Approximately 2,300 kg (5,070 lbs)

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 250 mm Table height: 95 mm Table bore: Ø 25 mm Gear ratio: 90:1 Clamping surface: 375 x 295 mm Kjdozpbrqjpfx Abnsdr Hole spacing on clamping surface: approx. 340 mm, Ø 18 mm - Indirect division via handwheel on the worm gear, gear ratio: 90:1 - Worm gear can be swiveled in and out for direct and indirect division - Clamping via 2 clamping levers in any position - 12-fold indexing and a readable degree scale on the rotary table - Crank with perforated disc - 1 perforated disc with 17, 19, 28, 32, 33, 39, 40 holes - 12 mm T-slots in the table top - Table surface slightly countersunk Overall dimensions L x W x H: 500 x 375 x 95 mm Weight: 40.5 kg Good condition

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel Kodju Tln Njpfx Abnedr - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 300 mm, travel distance Z-axis: 1,400 mm, total height: 2,400 mm, total width: 2,560 mm, overall weight: 13,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK, product length (max.): 5,460 mm, number of axes: 8, This 8-axis Index G250 turn-mill centre was manufactured in 2004. It includes a Knoll chip conveyor, EMAG cooling unit, and ISI mist extraction system. The machine features a hydraulic power chuck with a clamping range of 125–152 mm and an overhead gantry loader for automation. If you are looking to get high-quality turning and milling capabilities, consider the Index G250 machine we have for sale. Contact us for further details. Kedpfx Aboznc Nbenedr - Control Unit: Siemens SINUMERIK / INDEX C 200-4D- Rated Voltage: 400 V AC (3 Phase, 50 Hz)- Rated Current: 74 A- Rated Power: 43 kW- Control Voltage: 24 V DC- Tool Turret: 12-station tool turret with driven/live tool capability (individual powered tools are not included in the scope of delivery)- Workholding: Main spindle with hydraulic power chuck / collet system, SMW-Autoblok SLU-3-ZS hydraulic power chuck (clamping range 125-152 mm)- Steady Rest: SMW-AUTOBLOK / Original SMW Steady Rest (Type: SLU-3-28, Clamping range: 12-152 mm, Max. operating pressure: 60 bar)- SMW Autoblok steady rest: • hydraulic/self-centering steady rest • mounted on its own lower slide • suitable for providing additional support for long or thin workpieces- Tailstock unit with a rotating center on the right side of the work area for supporting longer workpieces- Hydraulic System: Integrated hydraulic power unit operating at 95 bar pressure- Automation / Gantry Loader: Promet Automation gantry loading system overhead- Coolant / Chip System: Knoll chip conveyor / coolant unit (YOM: 2004)- Chiller Unit: EMAG Chiller / Cooling Unit (YOM: 2016, Cooling capacity: 9.5 kW, Refrigerant: 2.5 kg)- Mist Collector / Air Cleaner: ELBARON / ISI RON / A 2500 Electrostatic Air Cleaner / Mist Extractor (YOM: 2004)- Documentation Included: Complete documentations, operating manuals, etc.- Transport Dimensions (L x W x H): Approx. 5460 x 2560 x 2400 mm (width reducible to 2450 mm)- Machine Weight: Approx. 13,500 kg Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2012, Motor: 0.75 kW Technical data: see illustration. Kdedpfxoxcty Ts Abnjr

Condition: good (used), Year of construction: 2012, Motor: 1.1 kW Kodpfxjxbgfms Abnsdr For technical data, see illustration.

Condition: good (used), Year of construction: 2012, Motor: 1.1 kW For technical data, see illustration. Kodpfx Abexbgfgonjdr

Year of construction: 1983, condition: excellent (used), *complete with a RÖHM 4-jaw chuck diam. 200 mm Center hight: 160 mm Kdjdpfx Abjmrnkzjnjr

Condition: used, functionality: unexamined, Ferwood Code: AGG0207 - Manufacturer Code: 6314H0080 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service. Please contact us. 4.5KG 20X20X20 Kdodjylal Nopfx Abner