MachineryAG

Condition: used, Year of construction: 1986, Panel laminating press for sale! Manufacturer: POLZER Model: Kapfu 2 Year: 1986 Laminating table height: 735 mm Gbslhowhbgbjcdw Iel Panel max. 1000 x 1000 mm Panel thickness max: 110 mm Heating from top Floor measurements: H 1710 mm, L 4500 mm, W 1400 mm

Condition: used, Year of construction: 2010, Functionality: fully functional, Horizon Three-Knife Trimmer for sale! Machine in production in very good condition. Could be tested. Available immediately! Model: HT-101 Manufactured: 2010 Serial: 326003 Description Trimming blower TB -100 Feed guide HCG - 100 Gbolheway N Sjcdw Iel * Fully automated three-knife trimmer; * Can be used in-line or off-line; * Automated setup for different book sizes and precision cutting accuracy; * Job changeovers are performed simply and quickly through the color LCD touch-screen. There are very few replacement parts when changing over the HT-101; * Knife height and cutting depth are easily adjusted through the color LCD touch-screen. TECHNICAL SPECIFICATION: * Max. untrimmed book size: 410 x 320 mm * Min. untrimmed book size: 148 x 105 mm * Max. trimmed book size: 366 x 300 mm * Min. trimmed book size: 145 x 103 mm * Trimming width: fore-edge: 45 mm / top-bottom: 30 mm * Trim thickness: max. 100 mm / min. 5 mm (min. book thickness is 2 mm) * Production speed: 400 to 1600 cycles / hr

Condition: used, Functionality: fully functional, Year of construction: 2008, Electric Scissor Lift JLG Sizzor 3369 (Refurbished, tested, fully working) Year of manufacture: 2008 Brand: JLG Model: 3369 NEW Battery Gjlhcdjwawzrsw Iobl NEW tires (airless rubber) Working height 12.06 m Platform length 1.65 m Platform width 2.92 m Platform extension 0.91 m Net load 450 kg Transport length 3.07 m Transport width 1.75 m Transport height 1.98 m Weight 4600 kg Travel speed 4.8/ km/h Persons 2

Condition: refurbished (used), Year of construction: 2002, Functionality: fully functional, New infeed and outfeed machinery for wood supply to moulder and out of it. Weinig chain pack infeed, tilt infeed, gross chain infeed system (fully renovated). Gbjlhcsv Tmptjdw Iol Feed speed from 20 - 100 m/min. Maximum and minimum working thickness: 12 - 100 mm Maximum and minimum working width: 50 - 247 mm Please find techn. specification with drawings in attachment below

Condition: refurbished (used), Year of construction: 2003, Functionality: fully functional, Manufacturer: Biesse Model: Selco EB 70 L Year: 2003 Type: Panel saw Technical characteristics Max. blade projection from work surface (cutting height): 70 mm Main blade max. diameter 300 mm, motor 7.5 kW Scoring blade max. diameter 200 mm, motor 2.2 kW Automatic lateral alignment device 3 air-cushion unloading tables with rounded profile 6 pneumatic clamps Windows PC-based control Gjlhcev Tldcedw Ijbl Remote-controlled Start cycle pusher, including emergency pusher Power and Motors Voltage: 400 V Pluging: Three-phased Air supply: 7 bar

Condition: used, Year of construction: 1999, Horizontal panel saw SCM Sigma 90, year 1999 for sale! Dismantled Cutting length 4500 mm Cutting height 90 mm Type horizontal Blade diameter 350 mm Engine power 11 kW Scoring unit Yes Weight ~3040 kg Gelhcdwov S Um Ro Ijbl CE marked

Condition: used, Year of construction: 2007, Functionality: fully functional, Cliché washing machine for sale Process steps: cleaning, rinse and dry The plate is automatically drawn into the processor by the dragging rolls Transport speed and temperature controlled by the computer Equipped with two brushes with alternative and floating movement Gas aspiration inside the tank via two blowers Possibility to connect the unit directly to your exhaust systems Temperature inside the solvent drum via the heater Max plate width 920 mm Min plate length 220 mm (with sticky plate any size) Drum recycle solvent capacity 35 Power 1,5 Kw Gslovyh Auehcdw Isbl Electrical 230V MONO 50/60HZ Dimensions 1830 x 1440 x 1060 mm

Condition: used, Year of construction: 2013, Functionality: fully functional, Manufacturer: MAXICAM CNC Technology., LTD Machine type: CNC cutting edge Gjlhovlnx Hscdw Iebl Year of manufacture: 2013 Made in: China Specification: 4 axis; Table size 6100x2400 mm; Working dimensions 5500x2200x180 mm; OSAI controller; Welded steel table and gantry for maximum straightness and rigidity; 9.5Kw Air Cooled HSD Spindle with dust extraction foot; 8 Position rotary style tool rack for Automatic Tool Change System to suit HSK 63F tool holders; Vacuum table with independent working zones; Becker Vacuum Pumps; Automatic tool length setting sensor Electronic Parts：German Schneider Electronic Spare Parts Switch gear: Japanese OMRON Switch German Igus highly flexible cables throughout the wiring loom high flow double layer phenolic vacuum matrix table (single layer standard) Machining speeds up to 25m/min Voltage: 3 PH, 380 V, 50 HZ Power: 21 KW Spindle power: 9 KW Dimension/m: 6.1 x 2.4 x 2.5 m Weight: 3100 KG Suitable materials: MDF, MDP, LMDP board, solid wood board, Plastic, Aluminium

Year of construction: 2015, Condition: used, Functionality: fully functional, Suitable for BOBST aniloxes with GPS handle Max roll length: 1400mm Max roll diameter: 200mm Max roll weight: 35kg Max. cleaning length: 1600mm Liquid tank: 55L Anilox washing machine The machine operates on the following principle: Washing: The anilox is rotated while heated cleaning liquid is sprayed onto its surface for 5 to 15min. Gbjlhcevdrzcedw Iel The liquid loosens ink particles from the cells and cylinder surface. Liquid recovery At the end of the wash cycle, the cylinder continues to rotate and the cleaning liquid is recovered and returned to the tank before being filtered and reused. Duration: 2 to 3 min. Rinsing: To remove loose ink particles, the cylinder is rinsed with high-pressure hot water. Nozzles are installed on a rail and slide to rinse the entire surface of the cylinder. Duration: 1 to 2 min. Drying The cylinder rotates while nozzles blow air over it. The drying nozzles are also mounted on a rail and slide to dry the entire surface of the cylinder. Duration: 1 to 2 min (depending on cylinder length)

Year of construction: 2011, Condition: used, Functionality: fully functional, Suitable for FISCHER & KRECKE aniloxes with GPS handle Max roll length: 1400mm Max roll diameter: 160mm Max roll weight: 35kg Max. cleaning length: 1600mm Liquid tank: 55L Anilox washing machine The machine operates on the following principle: Washing: The anilox is rotated while heated cleaning liquid is sprayed onto its surface for 5 to 15min. The liquid loosens ink particles from the cells and cylinder surface. Liquid recovery At the end of the wash cycle, the cylinder continues to rotate and the cleaning liquid is recovered and returned to the tank before being filtered and reused. Duration: 2 to 3 min. Rinsing: To remove loose ink particles, the cylinder is rinsed with high-pressure hot water. Nozzles are installed on a rail and slide to rinse the entire surface of the cylinder. Duration: 1 to 2 min. Drying The cylinder rotates while nozzles blow air over it. The drying nozzles are also mounted on a rail and slide to dry the entire surface of the cylinder. Duration: 1 to 2 min (depending on cylinder length) Gjlhsvdrw Dscdw Isbl

Year of construction: 2013, Condition: used, Functionality: fully functional, User friendly card to card cold sealing machine Economical for small to medium batches Single-station shuttle-type medical & retail package sealing machine Seal area 350 x 500mm CE certified Shorter cycle times than heat seal Energy efficient by eliminating the need for heat Maintenance free Quick set-up and changeover Low tooling cost Gbjlhcdwou Upfzs Iol Available immediately, almost new machine!

Condition: used, Year of construction: 2011, Functionality: fully functional, Technical data Maximum material thickness stainless steel 8.0mm Maximum material thickness brass 3.0mm Maximum material thickness cupper 3.0mm Maximum material thickness mild steel 25.0mm Maximum material thickness aluminium 6.0mm Control SIEMENS SINUMERIK 840D Dimensions (long x wide x high) 7.800 x 2.800 x 2.900 mm Electric consumption entire unit 11 kW Laser Output 2 kW Laser Type fiber TruDisk 2001 Max. workpiece weight 720 kg Beam ON working 30000 hours Gbolhcdwou T D Dvo Iol Laser ON working 24000 hours Maximum material thickness aluminium 6 mm Maximum material thickness brass 3 mm Maximum material thickness cupper 3 mm Maximum material thickness mild steel 25 mm Maximum material thickness stainless steel 8 mm Simultaneous positioning speed 85 X+Y m Weight 10.400 kg Working area (X x Y x Z) 3.000 x 1.500 x 75 mm

Condition: used, Year of construction: 2016, Functionality: fully functional, HOMAG Weeke BHX 500 (year 2016) with ONE machining support each at the top and bottom. Gbolheuy R S Aecdw Iol Insert table with automatic workpiece feeding and positioning. WORKPIECE DIMENSIONS Max. workpiece length: 2500 mm (min. 200 mm) Max. workpiece width: 1000 mm (min. 70 mm) Max. workpiece thickness: 80 mm Min. workpiece thickness: 2*4 mm Max. workpiece stacking: 2 pieces Number of milling spindles 2 Main motor power 6 kW Max. rotational speed 7500 1/min Tool clamping system ETP 25 Vertical drilling spindles 72 Horizontal drilling spindles in X 16 Horizontal drilling spindles in Y 4 Groove saw 90° turn able Machine table Feed-through technology Special workpiece clamping system clamp gripper Feeding Hedgehog buffer Outfeed belt conveyor Safety device Safety mat, enclosed cabin HOMAG AUTOMATION TPI 200 WEEKE Automatic positioning Control HOMAG POWER CONTROL PC 85 Conformity marking CE mark

Condition: used, Year of construction: 2013, Functionality: fully functional, ADIGE LT120 laser for sale! Technical specifications Gbjloupzbfohcdw Isl Machine CNC working axes: X tube axis 6500 mm Y beam guidance axis 170 mm Z beam guidance axis 95 mm A rotary axis (chuck) n x 360° A1 rotary axis (steady rest) n x 360° W unload piece support 85 mm Speeds: X tube axis 90 m/min Y beam guidance axis 30 m/min Z beam guidance axis 22.5 m/min A rotary axis (chuck) 750°/s A1 rotary axis (steady rest) 750°/s Accuracy: Position accuracy interpolated axes ± 0,05 mm Repeatability ± 0,03 mm Position deviation 1) ± 0,1 mm Work piece dimensions: Max. raw material length 6500 mm Min. remaining tube length 160 mm Finished part length 4500 mm Min. tube diameter 12 mm Max. outer circle diameter 120 mm Min. edge length on rectangular and square tubes 12 mm Max. circle diameter for inscribed rectangular/flat oval tubes 140 mm Maximum work piece weight: Raw material and finished part 13,5 kg/m Control Siemens Sinumerik 840D: RAM 256 MB Color monitor TFT 10,4“ Hard disk memory 10 GB for NC programs PCU with Windows Laser Rofin Sinar DC020 Max. laser power: 2000 W Max. sheet thickness: Mild steel (O2): 6 mm Stainless steel (N2): 4 mm Aluminum alloy (N2): 3 mm Beam mode: K-factor >0.9 Consumption values: Laser gases: Premix gas bottle inside the laser source. Bottle substitution every 12-18 months, according to working hours. Cutting gases O2 or N2 consumption depends on cut material and part geometry. Complete unit electrical consumption: 20 - 40 kW/h all included varies according to the cut material and part geometry. Compressed air consumption: 30 Nm³/h

Condition: used, Year of construction: 2006, Functionality: fully functional, Fisher+Rueckle EM-28 Edge strengthening and trimming device edgemaster, year 2006 for sale! Veneer strip length 420 - 2800 mm Veneer sheet width (cross grain) 400 - 4200 mm Veneer strip thickness (incl. trimming) 0,3 - 1,5 mm Veneer strip thickness 0,3 - 2,0 mm Production speed (continuous) 15 - 35 m/min. Cut-off each side 10 - 350 mm Tape (paper) width 6 mm Tape (paper) thickness 0,16 mm Type CP-99 Roll (core in- and outside) ∅ 75 mm, ∅ 325 mm Roll (width) 65 mm Tape running meter 3200 m Electric energy 1,1 kW Golhcjumrgajdw Ijbl Compressed air 6 bar Compressed air consumption 5 NL/min

Condition: used, Year of construction: 2013, Functionality: fully functional, Fisher+Rueckle FZR-24 Veneer crossfeed splicing machine, year 2013 for sale! Veneer strip length 400-1100 double lane/ 350-2100 mm single lane Veneer strip width 50-500 mm Gelheumrf Aocdw Iobl Veneer strip thickness 0.3-1.5 mm Max nominal output /machine cycles 30 cycles/min Average production speed 17-20 cycles/min Effective length of heating zone 2478 mm Connection power 22 kW Compressed air 6 bar Glue types PVAc or UREA based

Condition: used, Year of construction: 2006, Functionality: fully functional, For sale Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600! Tech. data Cutting length 2.600 mm Length of cross-cut 1.477 mm Cutting height 100 mm Strip width min 20 mm Rip fence Yes Gbeleumlinohcdw Ijl Pressure beam pneumatic Blade drive pneumatic Weight 3.800 kg CE marking Total connection 10 kW

Condition: used, Functionality: fully functional, Manufacturer: Atlas Copco Gjlhcdwjuh N S Ij Iobl Type: ZT132VSD-FF Power: 132kW/50Hz Max. pressure: 8.6 bar Air delivery: 19.5 m³/min Operating hours: 71 979 h Dimensions: 4040mm L x 1650 W x 2000 H Net weight: 3700 kg

Condition: used, Year of construction: 2020, Functionality: fully functional, roll diameter: 135 mm, conveying length: 2,500 mm, construction width: 1,300 mm, power: 0.37 kW (0.50 HP), Ormamacchine discs powered conveyor 2 pcs. for sale! Year of manufacture 2020 Dimensions 2500 x 1300 mm (useful) Disc diameter 135 mm Distance between discs 140 x 140 mm Change gear motor 0.5 HP Adjustable speed 8:40 m/min Water tray for disc washing made by galvanized iron sheet with 1.5 mm thickness. Speed is adjustable through hand-wheel Discs in stainless steel Transmission gear by chains Golheuhmq Uecdw Isbl

Condition: used, Year of construction: 2000, Functionality: fully functional, Manufacturer: HOMAG Model: KFL 10/22/QE/CF Type: Double-side Sizing & Edge Banding machine Year: 2000 Golheuggpzscdw Ijbl Status: Connected, test possible. Location Lithuania Basic machine Workpiece thickness 12...60 mm Workpiece width 70... mm Workpiece overhang to transport chain 40 mm Feed 10...40 m/min Power consumption Main drive 3...75 kW Height adjustment 0,2 kW Machine main drive Feed 6...30 m/min Power draw 2,2...6,9 kW Gluing unit Edging type: Straight and softforming edges Edging material height 16...65 mm Workpiece feed max. 60 m/min Contour, trimming unit CF/CS 10/11/12 Discharge valve HMA 1 Melting unit HMG 12-1x1-M-HO Gluing section for preformed parts Type of edge Straight edges drum profiles Edge material Belt from roll Snipping unit for profile parts WK 46 Saw blade (diameter 80 mm, cutting width 3.2 mm, drill hole 34 mm, number of teeth 20) Flush-trimming unit and scraping unit for performed parts Buffing unit for performed parts Specification, layout on request

Condition: used, Functionality: fully functional, Machines connected in one line (all four machines are only sold together): 1. Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600 2. Glue application machine GLUEMASTER, year 2006 3. Roller conveyor MONGUZZI R2500, year 2009 4. Veneer fanning machine Fisher+Rueckle FANNINGMASTER AP515, year 2009 Tech. data Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600 Cutting length 2.600 mm Length of cross-cut 1.477 mm Cutting height 100 mm Strip width min 20 mm Rip fence Yes Pressure beam pneumatic Blade drive pneumatic Weight 3.800 kg CE marking Gslhcdjt A Nr Sjw Isbl Total connection 10 kW

Condition: used, Year of construction: 2009, Functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Gslet Akcfehcdw Iebl Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg Stacking device DA-2200 Veneer format length (longitudinal to the fibre) 600 * - 1500 mm Veneer format width (transverse to the fibre) 500 * - 2200 mm Maximum stacking width for output on the - right-hand side 2200 mm - left-hand side 2200 mm - back 1500 mm Stacking height max. 500 mm Power consumption from FZR-15 Weight 1200 kg Lifting table 2500 mm L x 1200 mm W. 1000 kg

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, DESCRIPTION The STARPRINT is a flat bed semi-automatic printing machine, compact, capable to print in all the types of surfaces until a maximum thickness of 20mm, therefore the machine was a plate that is adjustable in height. Possibility to work 3 methods: automatic; cycle and manual. STARPRINT TECHNICIAN DATA Gjlhcdett I Sijw Ijbl Printing size (depth* width) cm 50x700 Maximum size from screen (depth* width) cm 94x110 Dimension printing table (depth* width) cm 82x105 Vacuum area (depth* width) cm 62x85 Height from working platform cm 90 Maximum production pieces per hour 900 Out. dim. (width*depth* height) cm 152x144x120 Installed power Kw 1,5 Working air pressure BAR 5-6 Weight Kg 420 Voltage V 400 Air consumption L/h 190

Condition: used, Year of construction: 1999, Functionality: fully functional, We are selling Palletizer and Signode machines that were connected to the inliner Martin 924. Status: dismantled. Available immediately from warehouse. Machine details: Palletizer max. pallet size: 1900mm x 1700mm. Max. pile height: 1800mm Conveyors included: 1435 W x 2090 L 1476 W x 2185 L Gjlhcdwstri Ngs Isbl 1730 W x 2000 L (elevator) 1310 W x 3835 L 1200 W x 2200 L Control panel, elevator, electric cabinet Signode bundle strapper Model ISB-1300 Mono, year 1999

Condition: refurbished (used), Year of construction: 2005, Functionality: fully functional, Giben Prismatic 2 SPT H.100, year 2005 after partial refurbishment - new motor and control! Cutting length 3800 mm Width of lifting table 2200 mm Number of grippers 5 Gbslerx R I Hshcdw Isl Feedrate max 130 m/min Saw blade projection 100 mm Saw blade diameter max 400 mm Main motor power 11 kW Scoring saw YES Lift table YES Stop side Left Control GIBEN G-DRIVE RT Conformity marking CE mark Total connection 18 kW Floor: L 9572 x W 6645 x H 1800 Weight 7840 kg Status: dismantled