Year of construction: 2012, condition: good (used), Year of manufacture : 2012 Film width : 50mm Product size range min. mm 50 x 40 x 5 Product size max width x height mm 330 x 160 Rjdpfjiqfkwox Ab Ier

Year of construction: 2011, condition: used, Card gluer Kolbus KK 841 Year: 2011 Rodpoyyb Sbsfx Ab Ijr Hotmelt glue unit: Nordson Problue 4 Compatable with Kolbus gatherer: ZU 841.B

Year of construction: 2004, condition: used, Conveyor tower Rsdpoyyb Rwjfx Ab Isr Ambaflex / Kolbus SV-400-1800-HS / XAF 660 Year: 2004 Description: - Straight delivery

Condition: used, Year of construction: 2016, Perfect binding line Kolbus KM 610 Year: 2016-2018 Consisting of Gathering machine Kolbus ZU 832.A Year: 2016 Description: - Hand feeding station - Horizontal feeder(s): 15 - ATC thickness control - Optical sheet control - Air center: Backer VariAir - Set up element - Reject gate for incomplete products: AS 842.A - Transfer into the binder Perfect binder Kolbus KM 610.A Year: 2016 Description: - Automatic setting - Co-Pilot with touch screen - Book measuring table: MT 600.A - Kolbus AFS 702.W, excl. license. (remote diagnostics) - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.B - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson smelting unit - Kolbus XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Stream cover feeder: SAL 610.A - Scoring station: 4 x - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Escape delivery Conveyor tower Front cutter Kolbus FA 650 Year: 2018 Description: - TFT Touch screen Rjdpfx Absyybqke Ier - Throughfeed Three knife trimmer Kolbus HD 143.P Year: 2016 Description: - Co-Pilot with touchscreen - Right hand infeed - Cut counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 - 18 Book stacker Kolbus KL 501 Year: 2016 Description: - Co-Pilot with touchscreen - Delivery to the right - Straight delivery Palletiser Kolbus PL 771.E Year: 2018 Description: - Automatic setting - Blocking station: SR 501 stack-aliner - Turning device - Pallet dispenser - Slip sheet feeder - Pallet delivery station

Condition: used, Year of construction: 1995, Folding machine MBO K76 -4 P KZ Year: 1995 Description: - 16 page folder Redpfeilc Sbsx Ab Ior Feeder - Pallet feeder: FP - 76 - Counter - Pump Folding unit - Parallel fold unit with 4 buckle plates - Perforating shaft - First cross fold - Second cross fold to the left and right - Excluding delivery Power supply : 400 V, 3 phases

Condition: used, Year of construction: 2010, Front cutter SCS Automaberg Easy Fly Year: 2010 Description: - Colour monitor with touch screen - Automatic setting - Straight infeed - Cutting unit - Knife pre-setting device - Knives, total: 2 - Belt delivery Rjdpfxjyybmro Ab Ior - Throughfeed

Condition: used, Year of construction: 1992, Configuration Rodpfx Aboulh T Te Isr Horizontal stack delivery with pressing

Condition: excellent (used), Year of construction: 2020, Ref:11077 . 2020 Horizon BQ-480 EVA Late model perfect binder in excellent condition. Perfect binder designed for operation by one person with moveable touch-screen control panel for easy set-up. Customised set-up accounting for paper type, signature or loose sheet, sewn book blocks, notch binding, etc. Comprising: BQ-480 binder with hand feed station and 4 clamps Height adjustable LCD colour touchscreen for full automation of the following areas: • Main clamp book width • Milling head • Spine glue length • Cover size & scoring • Cover nipping unit Rjdpfxoyybcye Ab Ior • Book delivery width Milling & roughing unit with dust bag extraction EVA hotmelt roller type spine gluing tank EVA hotmelt side gluing discs with glue length cut-off Auto suction cover feeder with scoring and double sheet detection Improved delivery table for gentle handling of thicker or PUR bound books. Including accessories, tools & manuals. Accessories: Auto calliper book measuring device, for quicker make-ready. Specification: Book size, Max: 320 x 320 mm Min: 145 x 105 mm Open cover size, Max: 320 x 670 mm Min: 135 x 225 mm Book thickness : 1 to 65 mm Mechanical speed, Max: 1,350 cycles/hr.

Condition: excellent (used), Year of construction: 2020, Ref:11078 . 2020 Horizon BQ-480 EVA Late model perfect binder in excellent condition. Perfect binder designed for operation by one person with moveable touch-screen control panel for easy set-up. Customised set-up accounting for paper type, signature or loose sheet, sewn book blocks, notch binding, etc. Comprising: BQ-480 binder with hand feed station and 4 clamps Height adjustable LCD colour touchscreen for full automation of the following areas: • Main clamp book width • Milling head • Spine glue length • Cover size & scoring • Cover nipping unit • Book delivery width Milling & roughing unit with dust bag extraction EVA hotmelt roller type spine gluing tank EVA hotmelt side gluing discs with glue length cut-off Auto suction cover feeder with scoring and double sheet detection Improved delivery table for gentle handling of thicker or PUR bound books. Including accessories, tools & manuals. Accessories: Auto calliper book measuring device, for quicker make-ready. Specification: Book size, Max: 320 x 320 mm Min: 145 x 105 mm Open cover size, Max: 320 x 670 mm Rodeyybbpspfx Ab Ier Min: 135 x 225 mm Book thickness : 1 to 65 mm Mechanical speed, Max: 1,350 cycles/hr.

Condition: excellent (used), Year of construction: 2020, Ref:11079 . 2020 Horizon HT-30 Trimmer For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Comprising: Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Including knives, tools and accessories. Specification: Book Size, Max: 300 x 300 mm Min: 100 x 142 mm Pile capacity : 2 -- 51 mm Mechanical speed, Max: 200 cycles/hr. Production example, 1,000 books/hr. with 5 x 10 mm books in pile. Rodpfx Absyybaxs Isr Voltage frequency: 3-Ph, 200/220/400V, 50/60Hz.

Year of construction: 2017, condition: used, Case maker KOLBUS DA 290 Year 2017 For fully automatic production of display cards, calendar backs, game boards or luxury packaging. Configuration: - Copilot system with touchscreen - Cloth feeder for interval charging with pile magazine, max. stacking height 250 mm - Miss cloth control during the separation process - Moveable gluing station for processing hot-glue with glue preparation unit in the premelter, heated glue application roller and scraper roller - Cloth cylinder with grippers and exchangeable plate for rubber pad - Automated glue application adjustment - Viscosity control device with control for automatic water supply to ensure constant glue viscosity with pump and water tank for manual filling - Pressing roller device for crease-free connection of the cover material with boards and spine strip - Device for inside lining with hot-glue - Automatic case counter - Stream delivery - Roller conveyor incl. table Redpsyya Nrsfx Ab Ijr - Single case request for control purposes done from the operating side - Servo-controlled drive technology based on Siemens SIMOTION D - Active Line Module for energetic recovery of operating power in the line network - Board feeder multi-piece incl. board magazine Options: included - Board prestacking conveyor of one-piece board for interchangeable use - Device for large format (width) - Device for processing cold glue with inside lining - Template for preparing rubber pads (device for fitting the rubber pad on its plate outside the machine) - Remote Service Gateway (coupling with RSG 702.A) Technical specifications: - Mechanical speed: up to 40 cycles/min - Product thickness: 1 - 4 mm (all boards in the same thickness) - Boards width: 300 - 1.050 mm - Boards height: 210 - 735 mm - Board 1 + 5 width: 30 mm - Board 2 + 4 width: 100 mm - Board 3 width: 50 mm - Cloth width: 295 - 1.080 mm - Cloth height: 205 - 765 mm - Joint width: 4 - 10 mm - Turn-in width closed: 10 - 20 mm

Year of construction: 2009, condition: used, Palletiser Solema Cartesio Year: 2009 Description: - Automatic setting Rodovc Ucgjpfx Ab Ijr - Colour monitor with touch screen - Infeed conveyor - Stacking robot - Pallet dispenser - Slip sheet feeder - Pallet transport system

Condition: used, Year of construction: 2024, Cloth cutter Rodpfsvqbhlex Ab Ijr Kolbus: KS 601 Year: 2024 Slitting and cross cutting machine for roll material. Suitable for the processing of calico, linen, leatherette, wax cloth, gauze, shirting, PVC and other similar coated materials. Standard equipment: - main drive with servo drive - operating desk for standard and inching operation including speed adjustment - moveable material mounting shafts Special equipment: - cross cutting module and split cutting module with 10 circular knives - deposit delivery Material width: Max 1.600 mm Maximum cutting width: 1524 mm Minimum cutting width: 50 mm Maximum length of cut: max. 1.100 mm (for length and cross cutting) Minimum length of cut: 100 mm Material roll diameter: 500 mm Max. mechanical speed: 50 cuts/min Net performance depends on material, format, ... Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: used, Year of construction: 1999, Display, Program, Airtable, Table left, Table right Redpfx Aoyanmdeb Ior short-term available

Condition: new, Year of construction: 2025, NEW MACHINE Polar N78 PLUS 2 Resopal air tables 75 x 75 cm, including support corners left/right 2 HSS knives Onboard tools 2.Cover plate 40 mm (cutting width 50 mm) including control documentation Available at short notice Technical specifications Cutting width 78 cm / 30.70" Insertion height 12 cm / 4.72" Insertion depth 78 cm / 30.70" Maximum installation height (without cover plate) 12 cm Table height 90 cm Rsdpfx Asxc Ughob Ijr Electrical power (main drive) 3.45 kW / 4.75 H.P. Net weight 1350 kg / 2970 lbs

Condition: new, Year of construction: 2025, NEW MACHINE Equipment: 2 x nickel-plated air table 1000 x 1000 2 x HSS knives OPTIKNIFE knife changing device Rsdpexazbtjfx Ab Ior Tool kit 18.5" touch color display Technica Data: Cutting width 1,370 mm Insertion depth 1,450 mm Max. insertion height 165 mm Safety pressing pressure 30 daN Press pressure, min 150 daN Press pressure, max 5,500 daN Saddle speed return (0 - ...) 300 mm/sec Blade speed 45 cycles/min Residual cut, automatic, without cover plate 25 mm Residual cut, automatic, with cover plate

Condition: new, Year of construction: 2025, NEW MACHINE Mohr D 56 ECO Accessories: 2 HSS knives On-board tool Redpfxjwkrilo Ab Ier Documentation available at short notice

Condition: used, Year of construction: 2002, Approx. 1.6 million cuts Rsdpjw N R Ehsfx Ab Ior Table left Air table right short-term available

Condition: new, Year of construction: 2025, NEW MACHINE Polar N92 PLUS Accessories: 2 Resopal air tables 750 x 750 Rodpfsw D A Hnsx Ab Isr 2 HSS knives Standard cover plate Cover plate 40 mm (cutting width 50 mm), incl. control unit On-board tool Documentation Available now

Condition: used, Year of construction: 2008, Saddle stitcher Heidelberg Stitchmaster ST 450 Year: 2008 Operation / Control - Colour monitor - Semi automatic setting Feeders - Number of chain stations: 8 - Hand feeding station(s) - Horizontal signature feeders: 1 x DHU 450 - Vertical signature feeders: 4 x DVU 450 - Cover feeder: CHU 450 - Pump(s) Stitching unit Heidelberg Stitchmaster ST 450 - Thickness control - Stitching heads: 2 - Delivery to the left - Reject gate, for incomplete products Trimmer Heidelberg TR 150 - Sets of knives: 2 Delivery Heidelberg CHA Rodeh Ezmiepfx Ab Ier - Compensating stacker - Delivery to the left Technical specifications: Max. mechanical speed 14.000 cycles/hour Sizes (uncutted) Max. 320 x 480 mm Min. 85 x 128 mm Sizes (cutted) Max .315 x 475 mm Min. 80 x 120 mm Product thickness: max 12 mm

Condition: used, Year of construction: 2007, Bacciottini Pit Stop AF Speed creasing machine and perforating machine Max. format: 500 × 850 mm Rjdpjyx D Nmsfx Ab Ier Min. format: 100 × 150 mm Max. speed (A4 format): 8,000 sheets / h Paper weight: 80–600 g/m² Creasing & Perforating Performance Max. number of creases per sheet: 100 Distance between creases: 0.1 mm Power supply: 400 V Power consumption: approx. 3.5 kW Machine weight: approx. 230 kg Machine dimensions: approx. 1,600 × 800 × 1,200 mm short-term available

Condition: used, Year of construction: 2018, machine/vehicle number: 3287, Banding machine Year of manufacture: 2018 Rjdpjyx D Sbefx Ab Ijr Max. format: 510 × 305 mm Min. format: 110 × 95 mm Performance: Up to 600 packs per hour per line (max. 1,200 packs per hour total) Stack height: Max.: 150 mm Min.: 20 mm Dimensions: 2,900 × 2,000 mm Single or double operation Automatic double banding Format recognition Stack alignment (panel distribution) In stock Immediately available Location: Germany

Condition: excellent (used), Year of construction: 1985, machine/vehicle number: 5561703, Format (cm): 76 Equipment / Additional information: Side tables, air table, 1x reserve knife Rodpjydcuqofx Ab Ijr

Condition: excellent (used), For sale: professional German paper multi-spindle drill HANG 106 DTK 20. Industrial-grade equipment, ideal for bookbinding shops, printing houses, or the production of binders and calendars. Model: HANG 106 DTK 20 Manufacturer: Constantin Hang Maschinenfabrik Göppingen Redpfx Aboudl Ano Ior Number of spindles: 4 Drilling diameters: • Cardboard/paper: up to 3.0 mm • Material samples: 2.5 mm / 6.0 mm / 12.0 mm Drive: PRYM Getriebebau geared motor, 50/60 Hz Stable cast iron construction Adjustable work table Complete machine, ready for operation Technical condition: very good. Used but well-maintained, no play, with original nameplates and operating documentation.

Condition: excellent (used), Four-head paper drill. Several pieces available !!! Brand Hang Model 106DTK4 Details 4-head paper drilling machine With adjustable drilling heads Operation Electric foot switch, 2 speeds Available directly Rjdpeudl Ikefx Ab Ijr This additional information is standard for this model. Always check the details carefully during your visit. The 1975 Hang 100DTK4 printing machine is an iconic and reliable piece of equipment that has made a significant impact on the printing industry. Manufactured by Hang, the machine offers advanced features for its time and set the standard for high quality and efficient printing. The Hang 100DTK4 features a robust and durable design, ensuring stability and consistent performance during the printing process. Its printing technology, although conventional by today's standards, allowed for precise and sharp prints with satisfactory resolution for its era. Equipped with user-friendly controls and mechanical automation, the machine offered programmable settings for various printing formats and configurations. Its operation required skilled operators who were able to achieve accurate and repeatable printing results. The printing machine's capabilities extended to a variety of substrates, including paper, paperboard and lightweight cardboard, satisfying a range of printing applications common at the time. Launched in 1975, the Hang 100DTK4 presented a technological advance for its era. Its sustained performance and contribution to the printing industry are remarkable. While newer printing machines with advanced digital technology have emerged, the Hang 100DTK4 remains a historic symbol of performance and innovation in the printing industry in the 1970s. The machine has collector's value and serves as a testament to the evolution of printing technology over the decades.