Used Veneer Machine for sale (83,998)

Condition: used, Used machine Features and technical data: - Maximum feed-through width: - at 40° cutting angle: 250 mm - at 60° cutting angle: 165 mm - Maximum feed-through height: 180 mm - Cutting angle adjustable: 0 - 60° - Feed rate: 75 m/min - Table height: 650 mm Lodpfx Aex Nkudjffota - Table size: 1150 x 650 mm - Blade: 335 x 66 x 8 mm - Motor power: 1.5 kW - Electrical connection: 400 V with chassis Dimensions: 1230 x 860 x 1270 mm Weight: 385 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 1998, I sell Polymac Rubber edgebander little used, like new. Ltsdpfeuvdzusx Affoa

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Ltodpfx Ajvvi Udsffja

Condition: good (used), Code: 0062 Brand: KUPER Model: FW / J 900 Thread splicer for veneer Technical Data Reach mmm 920 Feed 15 mt/min Motor power Kw 0,18 Electrical connection v. 380/50 Total installed power Kw 0,45 Heating 200 watt Ltsdpfx Afsx I Dwpjfja Compressed air 6 bar Overall dimensions mm 1350 x 580 x 1600 h Weight kg 185

Condition: excellent (used), Year of construction: 1996, goose neck 920 mm feed speed 20 m/min veneer thickness ca. 0,4 - 2,0 mm motor 400 V, 50 Hz,, 3 PH incl. manual incl. glue thread Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price Ltjdpfxjg Nn E Nj Affsa • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), CATALOG NUMBER 7849 Technical Data: - Passage width under the frame: 920 mm - Foot pedal control - Table size: 1250x340 mm - 2 pressure rollers - Air requirement: 6 bar - Rubber drive roller at the bottom - 2 smooth metal drive rollers - Dimensions (L/W/H): 1240x500x1500 mm - Weight: 210 kg Ljdpfx Afsx Hh Amjfsta ADVANTAGES – German manufacture – Unpainted – DTR documentation – Very good condition – Used stapler Net price: 5900 PLN Net price: 1400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Used machine Equipment and technical data: - Max. feed-through width: - at cutting angle 40°: 250 mm - at cutting angle 60°: 165 mm - Max. feed-through height: 180 mm - Adjustable cutting angle: 0 - 60° - Feed rate: 75 m/min - Table height: 650 mm - Table size: 1150 x 650 mm Ledpfxsx H Danj Affjta - Blade: 335 x 66 x 8 mm - Motor power: 1.5 kW - Electrical connection: 400 V Dimensions: 1230 x 860 x 1270 mm Weight: 385 kg Availability: approx. end of January 2026 Stock location: North Rhine-Westphalia

Condition: used, Kuper Type FW/Mini veneer splicing machine for precise gluing and splicing of veneer sheets using glue threads. Ideal for smaller operations or flexible applications in the production of high-quality veneer surfaces. Includes a supply of glue threads. Stand throat: 420 mm Lsdpfxjwrfbdj Affjta feed: approx. 6 m/min

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Ltodpfx Afjwmb A Tefea Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: good (used), Code: 0487 Brand: KUPER Lsdpfx Afextat Uefsta Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95

Condition: excellent (used), Year of construction: 2003, Veneer Composing Machine Electric motor, separate for chains and glue application Glue is applied to the edge of the newly inserted veneer strip, which increases the strength of the glue joint. Robust, durable stainless steel conveyor chain with flexure joints Separate controls for temperature, speed, and pressure Quick and easily accessible glue tank for fast and convenient refilling or cleaning Multiple heating zones for individual temperature adjustment Extended glue tank lifetime due to integrated cooling unit Continuously adjustable feed speed INCLUDES GLUE COOLER Technical Data: Throat depth: 1200 mm Veneer strip width: 45–1200 mm Veneer strip length: 300–3200 mm Veneer strip thickness: 0.4 – 3.0 mm Lsdjxgg Hhjpfx Affota Veneer moisture content: max. 8–12 % Working height: 900 mm Feed speed: 5–50 m/min Heating zone length: 1000 mm Max. heating temperature: 250 °C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6 bar Dimensions (L x W x H): 2400 x 2300 x 1900 mm Weight: 1500 kg SPARE PARTS VALUED AT EUR 3,500 HAVE BEEN INSTALLED

Condition: used, Stack paper cutting machine, guillotine cutter, flatbed cutter SCHNEIDER Type Senator 155 Rubber, paper and veneer shear, plastic shear, fabric shear Rubber, paper and veneer shear Machine no. 60178 Year of manufacture 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Feed height: 140 mm Back gauge: max. 1550 mm Lsdpsdzqnyefx Affsta Knife drive motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for blade stroke release - Automatic pressing by pressure clamp holds the paper stack on the table - Manual clamp and stroke release via foot pedal (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electrical control unit (not operational), no wiring diagrams, no user manual - Back gauge adjustment via servo motor (motor, controller, and control unit present, not operational) Required space (L x W x H): 325 x 270 x 165 cm Space required for transport without disassembly: length 330 cm x width 270 cm x height 175 cm Space required for transport with disassembly: length 550 cm x width 220 cm x height 175 cm (machine + separate table) Machine: length 270 cm x width 190 cm x height 175 cm Side table: length 240 cm x width 170 cm x height 120 cm Weight of assembled machine: approx. 5000 kg (excluding the transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sale price does not include the 20 mm steel plate the machine is stored on. (Price for the steel plate: 900 EUR net)

Condition: used, Year of construction: 1982, Used machine Condition: good Equipment and technical details: Cutting length mm: 3,100 Cutting height mm: 45 Saw blade diameter mm: 180 Depth to stop mm: 500 Main motor kW: 1.8 Pneumatic clamps Rear stop Weight approx. kg: 400 Ltodpfx Afsw I Ulpofsa Location: Flörsheim Availability: short notice

Condition: excellent (used), Year of construction: 2006, I sell the veneer splicer Kuper FW-1200E. Ltodewg Ty Ropfx Affoa Very good condition. Available immediately.

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Lodpsxgqmxsfx Affjta Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: good (used), Code: 0270 Brand: EMME ELLE Model: G.L.C. 1200 - CE Standard Longitudinal glue jointing machine for veneer - CE Standard The longitudinal jointing machine allows a perfect jointing of two veneer sheets in one operation by using a patentedsystem for the glue application. The machine is equipped with two tanks for the mass glue application. This innovation grants high quality and high jointing finishing since the glue is simultaneously applied on both edges to be jointed. The advantages of this type of glue processing are the following: 1_higher working speed (the machine can reach a speed of 35/40 mt/min with some wood types.) 2_In case, for any reason, no glue is applied on one of the two edges, the jointing is anyway granted since the glue is applied on the other edge as well. 3_A high resistant jointing is granted by applying the glue on both edges, since the two sheets are jointed with glue to glue and not with glue to wood. Technical characteristics Veneer sheet dimensions Thickness mm 0.4-2 Min. Length mm 360 Min. Width mm 45 Max. Width mm 1200 Technical Characteristics Heating area length mm 1200 Heating temperature up to 240° Transport speed 10-40 m/min Glue type UREA Power connection 6 Kw Voltage 400 V / 50 Hz Machine dimensions Length mm 2600 Lodpox Ihgnjfx Affota Width mm 2000 Height mm 800 Weight Kg. 2000

Condition: excellent (used), Veneer gluing machine FWJ900 With glue veneer, neat condition Max. veneer thickness 2 mm, min. 0.4 mm Control via foot pedal Floor model, feed speed 7 mm, throat 900 mm, weight approx. 200 kg, dimensions: 1400 x 500 x 1680 mm Ljdpsvkfncjfx Affjta

Condition: used, Year of construction: 1995, Used machine Ltsdpfx Afjwi Adkjfea Year of manufacture: 1995 Equipment and technical data: Working length: 3000 mm Handwheel clamping Unit: 2 kW Availability: Short-term Location: Flörsheim

Condition: like new (used), Year of construction: 2007, I sell the veneer splicing machine KUPER FLI. Ljdevxvc Hepfx Affota Year 2007. Very good condition. Available immediately.

Condition: good (used), Code: 0225 Brand: CASATI MACCHINE Model: Z 2000 - CE Standard Thread splicer for veneer - CE Standard Technical data: Reach mm 1200 Feed speed 10/40 mt/min Veneer thickness mm 0,3-3 Total electrical power Kw 1,5 Noise level DB 73,5 Compressed air 6 bar Overall dimensions mm 2050 x 600 x 1500 h Lsdpfxjxmkkko Affjta Weight kg 450

Condition: used, Used machine Veneer splicing machine Machine number: 1262050 Motor power: 2.5 HP Motor speed: 2,810 rpm Cutting length: 3,100 mm Saw blade diameter: 180 mm Rear support plate missing Movable Transport dimensions approx. 3,700 × 700 × 1,450 mm Weight approx. 200 kg Availability: short notice Location: Solingen Lodpfx Afowka I Nofota

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Tabletop machine The zig-zag thread used as the adhesive medium is applied from below Automatic thickness and tolerance compensation for measured veneers Veneer from approx. 120 mm length, 35 mm width and a thickness of 0.3 - 2 mm Electrical connection: 230 V Throat depth: 700 mm Material feed approx. 6 m/min. Ltodpsw I Ur Nofx Affja Weight: approx. 54 kg Availability: short-term Storage location: Flörsheim

Condition: used, Used machine Condition: Fully functional Technical data: Working length: 3000 mm Ltsdpfow I U Evjx Affoa Handwheel clamping Power unit: 2 kW Availability: Short term Location: Flörsheim

Condition: used, Used machine Ltedpfsxdpmfsx Affoa Tabletop model, Throat depth 420 mm Motor power 25 W. Connection voltage 110 – 235 V, 1 phase, 50 – 60 Hz. Feed speed approx. 6 m/min. For joining veneers with thicknesses from 0.4 – 2 mm using glue thread. Heater power approx. 75 W. Complete with foot switch. Dimensions approx. 660 x 360 x 460 mm. Shipping weight 26.5 kg. Availability: short notice Storage location: Flörsheim

Condition: used, Used machine Equipment and technical data: Reach: 900 mm Connection: Thread Heating: Hot air heating Lsdsxdpm Eopfx Affjta Feed rate: 15 m/min Space requirement: approx. 1300x600x1700 mm Weight: approx. 200 kg Location: Baden-Württemberg Availability: short-term