Used C Fold for sale (17,393)

Condition: used, Globoidal cam gears, indexing, oscillator indexer, index gear Kjdpfx Ageriidyorjnd -Manufacturer: Manifold, Transmission Clutch Indexing -Type: V-1-C 5 120 -Shaft: Ø 48 x 145 mm -Indexing angle: 120° -Number of stops: 5 -Dimensions: 400/385/H395 mm -Weight: 151kg

Condition: excellent (used), Weiss Type: WK3-340/70 Weiss Air-Cooled Climatic Test Chamber Touch Panel Control Unit All control and operating commands can be triggered by simply touching the function symbols on the touch panel control unit. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Plug-ins The test chamber is equipped with plug-ins on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Penetration included in standard equipment R1: NW 125 mm L1: NW 85 mm Volume 335 liters Test chamber dimensions: Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for temperature tests: Minimum temperature -72°C Maximum temperature +180°C Kjdpev Sr Hzofx Agrjnd Temperature deviation, temporal ± 0.1 to ± 0.5 K Temperature homogeneity, spatial ± 0.5 to ± 1.5 K Temperature change rate, cooling 3 K/min Temperature change rate, heating 3 K/min Data for climatic tests: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation, over time: ± 0.1 to ± 0.3 K Temperature homogeneity, spatial: ± 0.5 to ± 1 K Humidity deviation, over time: ± 1 to ± 3% RH Operating data: Test room lighting: 2 x 24V, 50W halogen bulb Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 16 A Nominal power: 4.9 kW Fuse: 16 A slow-blow (on-site) Refrigerant: R-452A/R23 Weight: Approx. 585 kg For your safety, the following information is provided as a buyer! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2023, condition: excellent (used), Available for immediate delivery, 12-month warranty. Equipped with a safety system for solvent-based substances as per DIN 1539. - Internal dimensions (W x D x H): 2000 x 2000 x 2000 mm - External dimensions (W x D x H): 2900 x 2450 x 3600 mm - Capacity: 8,000 liters - Max. temperature (Tmax): 260°C - Exhaust air volume: 950 m³/h - Max. solvent quantity at Tmax 260°C: 145 g - Connected load: 81 kW - Including documentation and CE declaration Kjdpoxxk Rhsfx Agrond Installation and commissioning can be offered upon request. Inspection at our warehouse possible by appointment. We supply new and used industrial ovens. Please contact us! Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial oven, tempering oven, preheating oven, temperature oven, drying cabinet, chamber oven, curing oven, recirculation drying cabinet, recirculation oven, solvent oven, chamber dryer

Condition: used, Year of construction: 2011, functionality: limited functionality, We are offering for sale a used, automatic creasing and folding machine "Multigraf Touchline CF375" at a competitive price. The machine is operational, but the folds are not perfectly accurate and require adjustment. Comes with a spare motor including a sensor. After proper adjustment, it can function well, or you can use it for spare parts. Knodpfxjxxb T To Agrsd Creasing and folding machine 6 standard folding types Simple operation via touch screen Automatic job changeover without tools Stack feeder and suction belt feed Flexible output system Technical data: Feeder capacity: 180 mm Max. sheet size: 375 x 1,050 mm with extended table Min. sheet size: 105 x 148 mm Double sheet detection: Yes Paper weight: 80-400 g/m² or max. 0.4 mm Power supply: 100-240 V, 50/60 Hz Double sheet detection

Condition: good (used), Scope of delivery includes: 01x C-profile, used Material color: Sendzimir galvanized Overall length: 7,200 mm Profile dimensions: C 360 x 100 x 35 x 10 mm Material thickness: approx. 4 mm Your contacts in our company: Mr. Andre Evering Kedpfsw Hgwcjx Agrjnd Mr. Mario Klöver Mr. Falk Deutsch General information regarding the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be inquired about with us separately depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 2006, x-travel 850 mm y-travel 700 mm z-travel 500 mm Control HEIDENHAIN iTNC 530 rotary table 800 mm c-axis 0.001º ( ±360º) 0 B-axis (table) º mm number of spindle speeds 18.000 U/min/rpm Knsdpjxrvldsfx Agrjd tool taper SK 40 DIN 69871 spindle drive 15 kW max. torque on the spindle 130 Nm Tools changer 38 fach/tools Internal cooling system 80 bar handwheel HR- 410 total power requirement 41 kVA weight of the machine ca. 10,5 t Equipment- Paper belt filter – 200 l tank- Active control cabinet cooling- Infrared probe M&H (Heidenhain)- Laser tool measuring system Blum- Chip conveyor- Cleaning pistol with pump 2 bar / 40 l min- 3D Quick Set- Electronic handwheel

Condition: ready for operation (used), Year of construction: 2004, Various barrels are available. 1) 12x as-new Speidel barrels with accessories. 2) 3x stackable tanks C. F. Maier KK, year of manufacture: 2004, capacity: 650l. An on-site inspection is possible. Ksdpfx Aoxtfgmegrond

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Kodoxdi Ezopfx Agrjnd Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Year of construction: 2023, condition: as good as new (ex-display), 2 units new in stock, new machine warranty, warehouse stock, original packaging, available immediately With safety system for solvent-based substances according to DIN 1539. Matching loading trolleys in stock (see image). Contact us for more information! - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 260°C - Controller: P570 / 50 programs, each with 40 freely programmable segments - NtLog for controller: data recording via USB stick - Air circulation: 3600 m³/h - Exhaust air volume: 390 m³/h - Additional features: drive-in rails - Connected load: 39 kW Ksdpfx Agel Dw T Aerjnd - Net weight: 1150 kg - Incl. documentation, CE declaration We are happy to offer installation and commissioning services. Inspection in our warehouse possible by appointment. We offer new and used industrial ovens. Contact us for more information! Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial oven, annealing oven, heating oven, tempering oven, drying cabinet, chamber furnace, curing oven, convection drying cabinet, convection oven, solvent oven, chamber dryer

Condition: ready for operation (used), nominal power: 65 kW (88.38 HP), Met gas verwarmd Max temperature: 250 °C Capacity: 2650 x 2400 x 1950 mm Knsdjxpgdfepfx Agrjd Voltage: 400V

Condition: good (used), Your contact persons in our company: Mr: Andre Evering Mr: Marcel Brahms Mr: Simon Blank Here we offer you a used load distributor of the manufacturer Dexion for purchase. Kedpfx Asdvad Eogrjnd These can also be used for other manufacturers. The load distributors are designed for a shelf life of 800 mm suitable. Included in the scope of delivery: 01x load distributor, used Material colour: completely galvanized Total length: approx. 980 mm C-profile dimension: approx. 185 x 35 mm Opening for shelf feet: approx. 115 mm Weight / piece: approx. 10,074 Kg To distribute the field loads over a larger area. Our services at a glance: (prices on request) Mounting, construction our general terms of assembly are to be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out in accordance with the Requirements of BGR 234 visual inspection for all rack systems Delivery with our own vehicle fleet (without unloading)

Condition: used, Year of construction: 2007, Main electric motor: 320 kW, three-phase, 50 Hz, with a soft start system to reduce starting currents and mechanical load. Feed roller drives: separate electric motors with gearboxes. Hydraulic drive: electric motor, pump, tank, system of distributors and pressure gauges. Kodpfx Agexpid Isrjnd Feed type: roller with hydraulic pressure. Productivity: 300 bulk m3 per hour Finished chip size: 20–50 mm (adjustable).

Condition: new, functionality: fully functional, Year of construction: 2021, input voltage: 380 V, type of input current: three-phase, warranty duration: 12 months, working height: 650 mm, machine/vehicle number: SM20215245, Equipment: documentation/manual, Neat Lantech C-1000, right-handed version Knjdpfx Aet Dn Hqegred

Condition: like new (used), Year of construction: 2007, functionality: fully functional, total height: 860 mm, pressing force: 1 t, overall weight: 105 kg, total width: 400 mm, table width: 200 mm, table length: 230 mm, type of input current: AC, air pressure: 6 bar, FCP-C 10KN pneumatic press machine for sale in several pieces manufacturer: FCP-C pressing force 1 ton Stroke: 75-100 (mm) Air pressure 0.2-0.5 MPa Open height 320 (mm). two-hand operation table size: 200x230mm Shaft dimensions Bore diameter φ15H9 (mm) x depth 35 (mm). Speed ​​controller Low friction roller Rotation stop lever height: 880mm length: 360mm width:400mm weight: 105kg Many options (timing box with counter, load management device, etc.). ●The lowering speed of the press can be freely adjusted by the speed controller. ●Mechanical stop for bottom dead center adjustment. ●Inching operation valve for smooth forming. ●Air equipment is also standard. Knjdpfx Agov E Sazsred

Year of construction: 2023, condition: as good as new (ex-display), New machine warranty, stock item, available for immediate delivery. Equipped with a safety system for solvent-based substances according to DIN 1539. Matching loading trolleys available in stock (see picture). Please contact us! - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 260°C - Controller: P570 / 50 freely programmable programs, each with 40 segments - NtLog for controller: Data recording via USB stick - Air circulation: 3600 m³/h - Exhaust volume: min. 390 m³/h - Additional equipment: Loading rails Kedoxp Rpfopfx Agrend - Connected load: 39 kW - Net weight: 1150 kg - incl. documentation, CE declaration We are pleased to offer installation and commissioning services. Inspection by appointment in our warehouse. We offer new and used industrial ovens. Contact us! Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial oven, annealing oven, preheating oven, tempering oven, drying cabinet, chamber oven, curing oven, recirculating drying cabinet, recirculating air oven, solvent oven, chamber dryer

Condition: ready for operation (used), H&C Fours 700°C 1000 x 1100 x 1000 mm Max temperature: 700°C Power needed: 42 kW - 95A Kodpfjxpgdljx Agrsnd Voltage: 400V 3 phase

Condition: good (used), The scope of delivery includes: 01x C-profile, used profile dim.: C: 50 x 50 x 15 mm Knodpfx Aonfvbpsgrsd Material color: sendzimir galvanized total length: approx. 2.775 mm material thickness: approx. 2,00 mm weight / pcs.: 7,080 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: used, This listing is for theC Technologies IN-VPE-Flows Flowpipe The unit is in full working condition and is ready for immediate use 1. CTech™ FlowVPE or FlowVPX Systems Kedpjxhfquefx Agrend These are variable pathlength UV–Vis spectrophotometer systems designed for inline process monitoring in bioprocessing. The FlowVPE System is built for flexible measurement configurations and lab-to-manufacturing scalability, while the FlowVPX System is tailored for GMP environments with compliance capabilities

Condition: good (used), Tunnel passage width: 540 mm Tunnel passage height: 40 mm Quantity: 3 pieces Kodpfx Agohinmforend Price/piece

Year of construction: 2007, condition: as good as new (ex-display), new Cuenod C 120/160 GX507 industrial gas burner is available for sale Performance control is smoothly two-step; modulated Used fuel gas G20 Max power 1600 kW Minimum power 230 kW The burner diameter is 227 mm Dungs mb-vef 407 b01 s30 combustion regulator Fan motor power 2.4kw Voltage: 230 / 400V 2kW 50HZ IP47 GAS pressure: min 20 mbar / max 360mbar weight 109 kg production year 2007 Gas burner CUENOD is developed by innovative technology with a stable gas-air mixture and a low level of emissions. • The specially designed head contains nitrogen oxides below 80 mg / kWh. • Very low noise level (closed ventilation system). Kedpfjd Aqqzsx Agrond • Ventilation with the RHP® system to optimize the combustion process. • Cubic design with transverse fan. • Shunt for measuring the ionisation current. • AGP® system that provides the perfect air-to-gas ratio, CO2 High during the work cycle and to precisely control the flow of excess air required for optimum operating condensing boilers with maximum efficiency. The net price of commercial customers of EU customers If you need more information. Here we are to help! Please contact us at the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Depositor for hot products, will connect to a cooking vessel and pump it into bags with set a weight which is adjustable Air operated clipper to seal the bag Finished clipped bags can go into a tumble chiller to cool down. The machine is in good working order and ready for delivery Single phase electric 240 volts 50 Hz It needs an air supply Knedpfx Aoxgutpogrsd

Condition: good (used), The scope of delivery includes: 01x C-profile, used Manufacturer: SSI Schäfer profile dim.: C: 60 x 40 x 8 mm material color: sendzimir galvanized Knjdpjnbd Urjfx Agrsd total length: approx. 1.865 mm center-center-hole: approx. 1.825 mm material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill holeØ: approx. 10 mm Remark: - Application area pallet racks - In double rack rows, push-through safety devices are required if the distance between the loading equipment or loading unit is less than 100 mm. - In single rack rows, push-through safety devices prevent load units from falling out unintentionally. - A push-through safety device can also be used to attach / mount rear wall grids. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Year of construction: 2011, condition: good (used), Drying oven, tempering oven Caltherm 200 C For sale in excellent condition, CALTHERM manufactured air-mixed multi-purpose Convection oven heat treatment oven electrically heated oven with one chamber, with air mixing manufacturer: Caltherm J7172 year of manufacture: 2011 internal dimensions: width: 300cm height: 200cm length: 185cm over design temperature:200 °C Test Temperature: 200 °C Time to get to set point: 45 min number of elements: 12x 3,6kw fan motor: 15kw Total recommended Power supply of plant : 100A Type of temperature control: West 6400 external dimensions: Knedpfx Aovu Hvpogred width: 430cm length: 330cm height: 300cm weight: ca 4800kg

Condition: good (used), The scope of delivery includes: 01x C-profile, used Manufacturer: SSI Schäfer profile dim.: C: 60 x 40 x 8 mm Material color: sendzimir galvanized Knedpfxjnbfaps Agrsd total length: approx. 1.015 mm center-center-hole: approx. 975 mm material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill holeØ: approx. 10 mm Remark: - Application area pallet racks - In double rack rows, push-through safety devices are required if the distance between the loading equipment or loading unit is less than 100 mm. - In single rack rows, push-through safety devices prevent load units from falling out unintentionally. - A push-through safety device can also be used to attach / mount rear wall grids. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: excellent (used), Mr: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Included in delivery: 01x C-profile, II. choice Manufacturer: SSI Schäfer Material color: sendzimir galvanized total length: approx. 1.510mm profile dim.: C 100x60x10 mm material thickness: approx. 3,0 mm Remark: - Since this is a used product may be damaged, holes, welds or other rust approaches may be present. General information about the item: This item is offered for pickup only. A transport desired beyond that or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us. Kodpfxsh T Avxo Agrjnd Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)