Used Hand Folding Machine for sale (70,783)

Year of construction: 1970, condition: used, Hand guillotine shears, guillotine shears, sheet metal shears, sheet metal shears, folding machine, edging bench -Hand guillotine shears combined with: folding machine -Cutting width: 610 mm -Max. Section thickness: 1.0 mm -Swivel bending machine -Max. Working width: 610 mm Godjd E R R Sepfx Ab Djit -Max. Sheet thickness: 1.0 mm -Transport dimensions: 845/910/H1230 mm -Weight: 240 kg

Condition: good (used), GUK FA 49/4 Folding Machine + GUK FA 49/4 Cross Folding Module The machine is in very good technical and visual condition. Format: 490x690mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes on the main unit 4 perpendicular cassettes on the cross-folding unit First cassette extended. Cassette adjustments are dial-based. Smooth speed control. Counter with batching function and folding speed indicator. Gijdpoy Ehk Isfx Ab Dot Rietschle compressor. Tool roller with a large number of perforating, creasing, and cutting tools. Raised sound insulation covers. Vacuum-assisted feeding Mobile delivery (free standing delivery) with smooth speed control Full documentation. Extensive set of accessories.

Year of construction: 1991, condition: good (used), machine/vehicle number: 44070/91-180102, 4 Pockets 1 Folding Knife Gedpfsg I I N Iex Ab Djit

Condition: excellent (used), Format: to SRA Gijdpfxoy R U H Tj Ab Dot

Condition: new, Year of construction: 2024, chamfer lenght 0900 mm Gijdpfx Abjwp Ti Re Det distance between columns 900 mm pressure 20 t column arm 230 mm stroke length max. 150 mm travel -x axis 350 mm

Condition: new, Year of construction: 2024, chamfer lenght 0900 mm Giodpfxswp Th He Ab Dot distance between columns 900 mm pressure 20 t column arm 230 mm stroke length max. 150 mm travel -x axis 350 mm

Condition: ready for operation (used), Year of construction: 2008, - Underfloor suction feeder - Maximum feed width: 36 cm - GUK MCS-106 batch counter - 4 parallel folding pockets - Belt delivery Gisdpey Rrxajfx Ab Dot

Condition: used, Year of construction: 2014, Folding machine MBO Navigator K8 S-KTL/6 Year: 2014 Description: - 16 page folder - MBO Navigator Feeder - Pallet feeder: FP 120 - Pump Folding unit MBO K8 S-KTL/6 - Parallel fold unit with 6 buckle plates: 78 cm - Slitter shaft cassette - First cross fold - Buckle fold underneath first cross fold Godpsy Rlv Sjfx Ab Dsit - Second cross fold to the left - Noise hood over the entire folding section Delivery Palamides Alpha 500 Plus

Condition: new, - Working width 1020 mm - Max. sheet thickness approx. 2,5 mm (St 40) - Max. Bending angle 135 Accessories: - segmented upper beam Godpfx Abscca Rgo Djit - Foot pedal for tensioning - instruction manual

Condition: used, Year of construction: 2012, functionality: fully functional, Horizon SAC-150 Collating System Gjdpfsy I Hx Aox Ab Dsit 4 Towers / 60 Bins (2012, Used) Configuration: SAC-150 Collator (4 Towers / 60 Bins) SA-40 Sub Accumulator ST-40 Bypass Stacker Specifications SAC-150 – Modules: SAC-150a (Main Tower) / SAC-150m (Extension Towers) – Number of Bins: 60 – Sheet Size: Min: 148 × 210 mm Max: 297 × 420 mm – Bin Pile Height: 40 mm – Sheet Weight Range 45 gsm to 135 gsm – Overlap Settings: 4 steps – Power: AC 100V, 50/60Hz SA-40 – Accumulate Size: 140 × 204 mm ~ 350 × 500 mm – Pass Through Size: 120 × 148 mm ~ 350 × 500 mm ST-40 – Sheet Size: 182 × 128 mm ~ 350 × 500 mm – Stack Capacity: 360 mm

Condition: good (used), Year of construction: 1989, sheet width 2520 mm plate thickness 2.5 mm bending angle max. 135 ° stroke of upper beam 250 mm Gisdpfx Aoy Raiyeb Djt adjustment UW 80.0 mm back stop - adjustable ca. 925 mm work height max. ca. 935 mm total power requirement 6.0 kW weight of the machine ca. 2500 kg. dimensions of the machine ca. 3600 x 1650 x 1425 mm good condition (!!) with 1x split set of goat foot tools Equipment: - dynamic, powerful motorized folding machine - SCHRÃ?DER NC control unit "POS 800" with LCD display * Fast programming of individual parts - Control panel, front right - NC electro-motorized back gauge * with rear sheet support surface - Manual lower beam adjustment - 1x free-moving double foot switch - 1x extra bending machine .. B = 10.0 mm * built-in bending rail with .. B = 25.0 mm - 1x split set of goat foot tools ... H = 130 mm * a pointed rail is installed - Operating instructions

Condition: good (used), Ideal 8343 Automatic Folding Machine Made in Japan. Perfect condition, ready to use. This model is very well-equipped, with automatic cassette adjustment, automatic paper size detection, and an automatic feeder. Technical data: Paper size: min: 91×128 mm max: 297×420 mm A6-A3 Weight: 45-160g (max. up to 230g when half-folding) Power supply: 230V Weight: 34kg Detailed specifications: – Automatic folding position setting for the six most popular folds (half-fold, quarter-fold, „Z”, „C”, „altar” fold) – Automatic paper size recognition for six formats (A3, B4, A4, B5, A5, B6) Paper folding speed adjustable from 3,300 to 10,000 sheets per hour Gsdpfjy Nzlgex Ab Dsit Shelf for folded documents Automatic paper feeding system Smooth paper flow thanks to the conveyor belt Folding counter, batch countdown, total count, etc. Automatic stop with a sound when all sheets are folded A complex paper jam is signaled by an appropriate sound and a LED indicator.

Condition: used, Year of construction: 1982, sheet width 3100 mm plate thickness 2 mm Gjdpsyv I T Dsfx Ab Djit 90 mm adjustable bending rolls 90 mm weight of the machine ca. 4000 kg

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke Gijdpjmck Ryjfx Ab Det - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Gjdew Iq Ugjpfx Ab Dsit Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: used, Year of construction: 2011, total length: 2,660 mm, total width: 1,200 mm, total height: 1,210 mm, Colour: Grey Empty weight: 1.260 kg Price: On request - Year: 2011 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 0138 - Drive system: Conventional - Power [kW]: 0.8 - Max. sheet thickness [mm]: 2 - Max. working width [mm]: 2000 Gedpfoyf Hcbex Ab Doit - Transport dimensions: 2660mm x 1200mm x 1210mm (l x w x h) - Transport weight [kg]: 1260kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2021, functionality: fully functional, STC-Ref:G-571-0053 Gisdpfxsy R A Eqo Ab Dst Palamides Gamma 502-HO, Year: 2021 format: 510 x 240 mm equipped: - Dual-purpose cutting device - delivery with banding - pile height max. 12 cm - pile height min. 2 cm - speed 600 pck/hr per nutzen max. - paper size max. 51 x 24 cm - paper size min. 10,5 x 9,5 cm

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, working width: 740 mm, stack height: 750 mm, overall weight: 2,445 kg, total height: 1,617 mm, total length: 3,880 mm, total width: 1,640 mm, input voltage: 380 V, Equipment: compressor, documentation/manual, Machine configuration: Horizon AFC-744AKT folding machine with palett feeder Horizon MKU-54 mobile knife unit Horizon PST-40 press stacker unit The machine is made in 2008 Counter status is: approximately. 93M Machine condition: used, full funncional The machine is in stock, it is possible to check and test Gedpfsy R Aufsx Ab Djit Our company is official dealer and service of Horizon, our service technicians checked the macchine(s), everithing works perfectly. If need we can do demo or test on the machine.

Condition: refurbished (used), functionality: fully functional, Used HEIDELBERG TD 78/642 folding machine, sold as seen and approved. Complete with VFZ knife, pallet feeder, and COMBI pockets. Various deliveries with roller (SBP-VSA) available. Option for complete overhaul; cost estimate upon request. Gjdpfx Asyzxfzob Deit

Condition: used, Year of construction: 2004, functionality: fully functional, Heidelberg KD 78 KTLL folding machine – Year 2004. Overhauled with new extra grip rollers on the parallel fold, pneumatic window buckle, SAK 78 delivery. Gsdpoyzptpofx Ab Djit

Condition: like new (used), functionality: fully functional, Heidelberg Ti 36/66 folding machine + Kbi36 + Sta 30 F with marking system + NSF 36 (no stop feeder), consisting of: Godpfx Absyzpmco Deit - Flat pile feeder Fi 36 - Year 2002 - 1st folding station Ti36/6 with 6 folding pockets on the first unit, equipped with new extra grip soft rollers (Falztechnic) - Year 2002 - 2nd folding station Ti 36/6 with 6 folding pockets on the second unit, equipped with new extra grip hard rollers (Falztechnic) with polycord for extra small formats - Year 2003 - Electronic knife KBi 36 for cross folding - Year 2002 - Small format delivery STA 30 F + MKE with shingled stack movement - Year 2005 - No stop feeder NSF36 for continuous production. - Shingle delivery SA36 - Year 2004 - Transfer table between 1st and 2nd station

Condition: used, Type: RF 1 Giodpfey Rx Iusx Ab Det Machine No.: 2656 Year of manufacture: 1965 Motor power: 1.0 / 1.4 kW Spindle mount: MK 3 with drawbolt thread Table size approx.: 450 x 150 mm Estimated weight approx.: 600 kg Dimensions (W x D x H approx.): 1 x 0.6 x 1.6 m

Condition: excellent (used), Year of construction: 2011, Swivel bending machine Make: Schröder model: SPB EVO 3200//4.0 DU used year of construction: 2011 useful length 3240 mm max. sheet thickness 4,0 mm lowering bending beam 200mm stroke upper beam 650 mm bending center adjustment 80 mm max. speed 100/100 mm up/down max. bending speed 90 max. bending speed DU 150 mm max. bending angle 150 Ø min. bending inner radius 1,5 x t, mm motor power upper beam 2x4,24 kW Gjdpfxslnixis Ab Doit dimension: Lx6332 mm x W 2380 mm weight 12260 kg.

Condition: good (used), with stand and contraweight Motor power 1,1 kW (900 rpm). Gedpfxsd Hqvvo Ab Deit Sanding spindle 310 x 250 mm. 2 press spindles (rub cover), diameter 30 mm. Machine measurement 505 x 350 x 655 mm. Weight 20 kg.

Condition: ready for operation (used), Year of construction: 2000, sheet width 2520 mm plate thickness 4.0 mm ST thickness at "Niro-steel" 2.0 mm upper clamping bar adjustment 250 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm work height max. 869 mm control POS 2000 Gisdpfx Abox H Alco Dst voltage 400 V total power requirement 6.0 kW weight 4100 kg range L-W-H 4120 x 2400 x 2090 mm current list price ~ 90.000 euro from a maintenance workshop with excellent equipment (!!) new touchscreen installed in 2023 - in checked conditoins - machinevideo - ?v=5Y2NheJjdWo Features: - CNC electro-motorized universal bending machine * ??High-precision mechanics with modern control technology * For individual and series production * Robust high-speed machine with high axis speeds * Torsion-resistant welded construction - SCHRÖDER CNC control model POS 2000 * Control panel front right (operable with PC mouse) * Touchscreen replaced in 2023 * Color display * USB interface * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swiveling control, front right - Servo inverter-controlled drives * For bending/upper beam & electric backgauge - CNC motorized lower beam adjustment - CNC electro-motorized Backgauge * Travel speed 300 mm/sec. * with rear sheet metal support surface - 1x freely movable double foot switch - Operating instructions (PDF) * Optional accessories included: - SCHRÖDER split gouge tools - top