Used Ras for sale (70)

Condition: used, functionality: fully functional, Year of construction: 2002, controller manufacturer: RAS, controller model: Touch&More System 6000, working width: 3,200 mm, sheet thickness (max.): 2 mm, back gauge: 1,550 mm, input voltage: 400 V, year of last overhaul: 2025, Equipment: CE marking, emergency stop, foot remote control, We are offering this used RAS TurboBend plus 62.30 swiveling bending machine, manufactured in 2002, for sale. RAS turboBend plus 62.30 Year of manufacture: 2002 Bending length max. 3200 Back gauge depth max. 1550 Sheet thickness max. 2.0 Touch&More System 6000 (refurbished in 2025) USB stick, no longer with a 3.5-inch drive Hjdpfozlyx Iex Aa Esnp It functions perfectly. All maintenance has been carried out by us. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: like new (used), functionality: fully functional, Oven for processing plastics The oven can process thermoplastic materials. Manufacturer: Reinhardt Model: VL Year of manufacture: 1991 Serial number: 8182 Hnedpfezkhm Rox Aa Eep Connected load: 50.2 kW Voltage: 380 volts Operating temperature: 50 - 200 °C Cart dimensions (approx.): 2000 x 1200 mm (W x D), 500 mm opening

Year of construction: 2000, condition: ready for operation (used), Offered is a RAS guillotine shear. Cutting length: 4040mm, max. steel sheet thickness: 5mm, backgauge range: approx. 5mm-1000mm, cutting angle: approx. 1.0°, stroke rate: approx. 28-46strokes/min, control system: RAS System 2005, weight: approx. 9200kg. Inspection by appointment possible. Hedpfx Aaezka Igo Esnp

Condition: used, functionality: fully functional, Year of construction: 1992, operating hours: 18,922 h, control type: CNC control, Hydraulic pivoting bending machine Manufacturer: RAS, Type: 74.30, 3200 x 4mm Technical data Manufacturer: RAS Type: 74.30 Year of manufacture: 1992 Usable length: 3200 mm Capacity: 4 mm Operating hours: 18,922 h (read) Stroke: 400 mm Adjustability of the lower die: 80 mm Adjustability of the bending die: 80 mm Bending angle setting: 0 – 180° Bending angle accuracy: +/-0.1 mm Motor power: 7.5 kW Dimensions: approx. L 4.50 x W 1.80 x H 2.55 m Weight: approx. 5.8 t Equipment • Controlled back gauge 10 - 1500 mm • CNC control Multibend 9000, with 13" monitor, renewed • Automatic bending die adjustment • Gooseneck support rail, H = 150 mm, L = 3,200 mm, segmented • Bending rail 15 mm • Top bending rail, height 10 mm, L = 2,500 mm, segmented • Top bending rail, radius 17.5 mm, L = 2,500 mm, divided into 10 x 250 mm Hnedezhm Nfepfx Aa Eep All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 1962, guillotine shears, sheet metal shears, metal sheet shears, crank guillotine shears -mechanical guillotine shears -Cutting width: 2040 mm -max. cutting thickness: 2.0 mm -Equipment: back stop, side stop, 3 supports -Drive: 5.5 kW -Installation dimensions: 2650/1900/H1070 mm -Transport dimensions: 2650/730/H1070 mm Hodpsdzd Husfx Aa Eonp -Weight: 1378 kg

Condition: used, Stop for press brake, bending machine, guillotine shears ..., clamping angle, clamping aid,.Support rail for press brake, bending machine, guillotine shears, stop rail, clamping rail -Manufacturer: RAS, support rails from guillotine shears type RAS 53.60 -Dimensions: 805/100/H80 mm / groove width 16 mm 3 pieces -Dimensions: 720/75/H85 mm with stop rail 1 piece -Delivery/Price: complete -Transport dimensions: 805/350/H80 mm -Weight 34.8 kg Hodot Rl Uljpfx Aa Eenp

Condition: used, Swivel bending machine, edge bench, gutters, roof gutters, beading machine, beading machine Hnsdpfx Aedy Rhdja Eop -Max. Working width: 1280 mm -Max. Sheet thickness: 1.75 mm -Opening width: 180 mm -Clamping via: threaded spindle -Bending angle adjustable via: stop -Dimensions: 1850/600/H1240 mm -Weight: 380 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg Hjdpfx Aogxgm Hsa Esnp

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 3 mm, overall weight: 15,000 kg, input voltage: 400 V, bending angle (max.): 180 °, working length: 3,200 mm, working range: 3,200 mm, Equipment: documentation/manual, safety light barrier, Technical features: Year 2013 Working length 3200 mm Maximum sheet thickness (iron 400 N/mm2) 3.00 mm Maximum sheet thickness (stainless steel) 2.00 mm Hodpfxewq Rume Aa Ejnp Maximum sheet thickness (aluminum) 4.00 mm Maximum bending height on four sides 250 mm Upper jaw stroke 650 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, working width: 4,060 mm, overall weight: 5,300 kg, type of input current: three-phase, FEATURES Working length: 4060 mm Working thickness: 2.5 mm Rear table with spheres 155 additional tools to those present on the machine Hnsdpswb Ar Sefx Aa Ejp

Condition: good (used), Year of construction: 2000, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Specifications : Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum thickness of sheet metal (stainless steel) 1.5 mm Maximum sheet metal thickness (aluminum) 3.0 mm Maximum development sheet width 1500 mm Maximum four-sided fold height max * 203 mm Bending blade reach 180 degrees Machine width 5500 mm approx. Machine length 7000 mm approx. Machine height 2500 mm Total weight 21000 kg Power 18 kW Frequency 50 Hz Pressure 6 bar INCLUDED drag loading system Hnodpfxoqzibts Aa Eep

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Technical features: Hnsdpfxov A Tfgo Aa Eop Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum sheet thickness (stainless steel) 1.5 mm Maximum sheet thickness (aluminium) 3.0 mm Maximum sheet width of development 1500 mm Maximum height of bend on four sides max * 203 mm Bending blade action radius 180 degrees Machine width approx. 5500 mm Machine length approx. 7000 mm Machine height 2500 mm Total weight 20000 kg Power 25 kW Frequency 50 Hz Pressure 6 bar Loading system Blank Feeder with portal

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used RAS motor-powered squaring shear, type 83.20, manufactured in 1987, serial number 46/2. Hodpfx Aezg Hq Hoa Eenp Usable cutting length: 2040 mm x 3.0 mm - Manual back gauge, 500 mm - Front support with 2 tilting stops - Foot switch The machine is in stock at our warehouse in 71334 Waiblingen-Beinstein and is available immediately.

Condition: used, sheet width 2540 mm plate thickness 2.00 mm thickness at "Niro-steel" 1.25 mm Hjdexacftjpfx Aa Eonp no. of strokes max. 63 Hub/min cutting angle 1.13 Grad table height 750 mm table width 320 mm distance between columns 2620 mm back stop - adjustable 5.0 - 550 mm Control konv. engine output 3.0 kW weight of the machine ca. 1600 kg range L-W-H 3100 x 1980 x 1400 mm Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analogue display * adjustable from the front * stepless adjustment over the entire travel range - recessed grips in the support table - 1x hold-down bar - 1x side stop - 3x support arms - 1x freely movable foot switch - operating instructions (PDF) Special accessories included: - sheet metal holding device for thin sheet metal cuts

Condition: used, Year of construction: 1999, actuation type: hydraulic, working width: 3,190 mm, sheet thickness steel (max.): 6 mm, back gauge: 1,000 mm, overall weight: 6,800 kg, total width: 3,830 mm, We are offering this used RAS POWERcut 86.33 hydraulic plate shear, manufactured in 1999, for sale. Manufacturer: RAS Model: POWERcut 86.33 Year of manufacture: 1999 Condition: used Category ID: 1025 Type ID: 4196 Machine type: hydraulic plate shear - Technical specifications: Weight 6,800 kg Width: 3,830 mm Cutting length: 3,190 mm Maximum sheet thickness: steel 6 mm Back gauge depth: 5 – 1,000 mm If you have any questions or require further information, please send us a message or call us. “The machine is sold according to Incoterms® 2020 EXW [Frankenweg 2, 9100 Völkermarkt]. Once the machine is available at the specified location, the buyer bears all costs and risks, including loading, transport, and customs formalities.” Hnedozilwkjpfx Aa Eep

Condition: good (used), functionality: fully functional, Year of construction: 2000, working width: 3,200 mm, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 6 mm, back gauge adjustment: CNC-controlled, power: 7.5 kW (10.20 HP), Equipment: documentation/manual, Very well-maintained and technically upgraded RAS 74.30 folding machine with a working length of 3200 mm. The machine has been specifically modernized and is immediately ready for production – ideal for metal construction and sheet metal processing. Technical data: Working length: 3200 mm Max. sheet thickness: 4.0 mm (steel) Year of manufacture: 2000 Power: 7.5 kW Weight: approx. 5800 kg Equipment / Highlights: Hnodpfey A Ewmjx Aa Esp Motorized backgauge with swing fingers Travel path up to 2500 mm with stop extension Refurbished power supply Upgraded control system New SD card slot New flat screen (not yet visible in the photos) Reliable, robust industrial machine The machine runs smoothly and can be inspected under power.

Condition: used, functionality: fully functional, PROFILATRICE usata PER PIEGHE PITSBURG,NON "CE" RAS 22.07. Hodpezh E A Dofx Aa Ejnp

Condition: good (used), functionality: fully functional, RAS: Cutting length 1040 mm Sheet thickness in carbon steel 2.5 mm Sheet thickness in stainless steel (700 N) 1.5 mm Hedpfxjzhka Uj Aa Ejnp Rear stop up to 550 mm .....FASTI: 1020 x 2 mm

Condition: good (used), Year of construction: 2001, Offer 26153 Technical data: Hnsdjzg Dhijpfx Aa Ejp - max. overhang 200 mm - center distance between rollers 50 mm - max. material thickness at a tensile strength of 40 kg/mm² 1.25 mm - space requirement approx. W 300 x H 1150 x D 500 mm - weight approx. 25 kg - various beading rollers

Condition: good (used), RAS panel shear, 4m length, capable of cutting sheet metal up to 5mm thick, in good condition, with hold-down function. Hedpfjzgf Uqex Aa Eenp

Condition: used, functionality: fully functional, Year of construction: 2023, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: RAS, controller model: 4,0, working width: 3,200 mm, lower beam adjustment: 650 mm, folding beam adjustment: 150 mm, installation height: 2,200 mm, throat depth: 1,000 mm, bending angle (max.): 180 °, bending radius (max.): 25 mm, bending radius (min.): 1 mm, operating speed: 120 mm/s, reverse speed: 200 mm/s, number of axes: 4, type of crowning: CNC-controlled, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, back gauge speed R-axis: 200 mm/s, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 3,250 mm, overall weight: 11,500 kg, total length: 5,600 mm, total width: 3,360 mm, total height: 2,200 mm, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, FOR SALE: RAS XLTBEND 71.30 UPDOWN CNC PRESS BRAKE Price: 250,000 EUR net – negotiable For sale, a high-quality RAS XLTbend 71.30 UpDown CNC press brake from the renowned German manufacturer, RAS Reinhardt Maschinenbau GmbH. This machine is designed for the professional production of components from steel, stainless steel, and aluminum sheets. The UpDown technology enables bending upwards and downwards without the need to rotate the workpiece, which significantly reduces production time and increases efficiency. TECHNICAL DATA: • Working length: 3200 mm • Max. sheet thickness: mild steel: 3.0 mm stainless steel: 2.0 mm aluminum: 4.0 mm Hnjdpfjzfvkgjx Aa Eop • Beam opening height: 150–650 mm • Automatic adjustment of bending parameters via CNC • Servo drives for working axes • Beam-in-Beam technology for very high bending precision • CNC control with 3D visualization EQUIPMENT: • XLTbend CNC control • Two 24" touch screen monitors • Import of STEP, DXF, GEO files • Automatic generation of bending programs • 3D bending process simulation • "T"-type positioning table • Positioning system with suction cups • Automatic bending sequence • Air-conditioned control cabinet • Safety and diagnostics system ADVANTAGES: • Very high production efficiency • Minimization of operator involvement • Ability to produce complex parts without repositioning the sheet • Ideal for the production of enclosures, cassettes, control cabinets, ventilation elements, and sheet metal structures Condition: very good Location: Skarżysko-Kamienna, Poland Price: 250,000 EUR net – negotiable Contact: Kamil Wiatrak

Condition: used, Max. bending length: 2540 mm Max. sheet thickness: 2.5 mm steel Motor-controlled back stop with folding cams up to 1500 mm Hedpfxoza Ahps Aa Eonp Several program sequences with different bending angles and stroke heights are possible Control Multibend 2000 Polished bending rail Weight: 1,700 kg

Condition: used, Max. cutting length: 2540 mm Max. sheet thickness: 2 mm steel Hjdpfoy Uyamex Aa Eonp Manual rear stop up to 550 mm Side stop and table extensions knife sharpened 1600 kg

Condition: used, machine/vehicle number: ubk., sheet width:6060 mm plate thickness:2 mm total power requirement:7,5 kW Hnjdpfscxxuqsx Aa Eep weight of the machine ca.:6,75 t dimensions of the machine ca.:7,0x2,0x2,5(LxBxH) m

Condition: used, Technical details: sheet width: 2004 mm Hnedeya Eq Hjpfx Aa Esp plate thickness: 2,5 mm distance between columns: 2040 mm Total power requirement: 3 kW bending angle max.: 180 ° Weight approx.: 1700 kg dimension machine xH: 2,7 x 1,3 x 2,0 m