Used Hydraulic Folding Machine for sale (74,349)

Condition: ready for operation (used), Year of construction: 1993, control type: NC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, overall weight: 6,000 kg, total length: 2,800 mm, total width: 3,400 mm, total height: 2,100 mm, Hydraulic swiveling bending machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of manufacture: Dec. 1993 / Jan. 1994 Technical data Manufacturer: Fasti Type: 212-20-6 Year of manufacture: Dec. 1993 / Jan. 1994 Working length: 2040 mm Sheet thickness: 6 mm Stroke: 300 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.35 x W 2.80 x H 2.10 m Weight: approx. 6 t Equipment - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a button and digital display - Controlled back gauge (1000/1500 mm) with ball bearings - Sharp edge guide - Bending guide All information is subject to change without notice. The machine is particularly distinguished by its very simple operation. A demonstration is possible at any time in our showroom. Pjdpfsza D Eiex Amyjpw

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, working width: 2,080 mm, bending angle (max.): 145 °, sheet thickness steel (max.): 3 mm, sheet thickness aluminum (max.): 4 mm, overall weight: 9,000 kg, total length: 9,500 mm, total height: 2,100 mm, working length: 8,020 mm, DURA 8.3 hydraulic bending machine – for roofing and facade profiles. Ppedpfjwm Ha Rjx Amyow ✅ BMS multi-touch controller • Touchscreen • Intuitive bending design on the controller • Automatic calculation of bending sequences with graphical simulation • Convenient profile programming, transfer via Wi-Fi or USB • Archive of all previously used projects on the machines ✅ Design and functionality • Robust electric knife driven by a maintenance-free timing belt • Large amount of space for maximum design freedom for bent parts • Adjustable material support for additional feed • Adjustable clamping beam (adjustment to the appropriate material thickness) • Adjustment of the initial setting separately for each arm • Pre-bending in the clamping beam for edge hemming • Removable clamping strip for the bending beam, 15x60 mm, 3 pieces • TAZ 1000 stop with an adjustment range of 30-1000 mm • 5 fingers of the stop, adjustable along the entire length of the device • Multi-functional foot pedal • Complete safety package

Condition: good (used), MBO K760E S-KTL/6+ Folding Machine with SBAP 82ME Press Manufactured in 2016. Paper format: 760x1100mm Maximum speed: 180m/min Psdpfjzlaimox Amyopw High stack feeding, FP-95 pallet feeder 6 cassettes on the first unit 2 knives 1 side cassette after the knife Additional veneer cassette. Sound insulation on all units MBO SBAP-82ME stacking press Spare parts and documentation included. The machine is in perfect condition, ready to work.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Ppjdpfx Asy Uiyvsmyjw Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: ready for operation (used), functionality: fully functional, total length: 930 mm, total width: 1,530 mm, total height: 1,011 mm, production capacity: 650 unit/h, TECHNICAL DETAILS Folding capacity: 650 units/hour MACHINE DETAILS Machine dimensions: 930 × 1,530 × 1,011 mm Power supply: 220 V, single-phase/two-phase Pedpfxozmr Evs Amyjpw Power consumption: 0.7 kW FEATURES Integrated packaging 6 different folding programs

Condition: used, Year of construction: 2005, 1 hydraulic injection molding machine, ARBURG ALLROUNDER SELECTA 270S Self-dismantling capability Color: as shown in the pictures, matching the images and inspection Year of manufacture: 2005 Machine number: 198190 Dimensions L/W/H: 350x110x200cm Condition: used Psdpjzqcl Iofx Amyepw

Condition: used, Year of construction: 1982, Technical details: sheet width: 1500 mm plate thickness: 1,5 mm distance between columns: 1760 mm knife length: 152 mm Psdpfxju Ibzwj Amyepw bending angle max.: 160 ° total power requirement: 1,3 kW Weight approx.: ca. 800 kg dimension machine approx.LxWxH: 2,5x0,7x1,5 m - adjustment of the upper cheek 350mm - adjustment of the bending cheek / lower cheek 60/60 motoric - bending edge up to max. 10mm radius - without back gauge - upgrade possible -manual counter - foot pedal (pedal left/right) accessories: - 1 set tools *

Condition: used, Year of construction: 1965, Technical details: plate width: 2040 mm plate thickness: 2 mm distance between columns: 2300 mm Ppsdpfx Amjzp U Hboyow stroke adjustment: 2050 mm bending angle max.: 0-135° ° Knife length: 85 mm weight of the machine ca.: 1,7 t space requirements approx. LxWxH: 3,2 x 1,7 x 1,3 m Max. adjustment of bending beam: 80 mm *

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 2020 mm plate thickness 2.0 mm distance between columns 2100 mm angle adjustable from - to 130 Grad Ppsdpfx Amexab S Seyjw total power requirement manuell weight of the machine ca. 1850 kg. range L-W-H 3100 x 725 x 1350 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - heavy/manual swivel bending machine, with counterweight - long service life thanks to robust welded steel construction - universally applicable for metalworking shops and craft businesses - quick and easy bending process using a bow handle - all bearings and guides in a stable design - easy adjustment of the upper beam for efficient work - manual adjustment of the lower beam - manually adjustable angle fixed stop with analogue degree display

Condition: used, Year of construction: 1985, sheet width 1500 mm Ppsdpjzpzc Nefx Amysw plate thickness 1,75 mm

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Ppsdpsttc Uaofx Amyjw

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Pjdpfemck Ryox Amyjpw Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: good (used), sheet width 1280 mm plate thickness 3.5 mm bending angle max. 180 ° stroke of upper beam 200 mm Swing beam adjustment 30.0 mm Bending time for 90° 5.5 sek Control konv. voltage 380 V total power requirement 2.0 kW weight 1180 kg range L-W-H 1930 x 1750 x 1175 mm Features: - Simple electric motor-driven swivel bending machine - Manual angle adjustment * via electric potentiometer - 1x bending tool set - Manual lower jaw adjustment .. 30.0 mm - Emergency stop button on the front - 1x freely movable dual foot switch - User manual (PDF) Podpeznnhcsfx Amyepw

Condition: like new (used), Year of construction: 2017, GUK RS 21/070 Roller Folding Machine This automatic machine is an add-on unit for packaging lines. Suitable for brochures with 4 folding pockets. Technical data: Psdpfxjyuybps Amyspw Folding unit: 210 mm feed width Output up to 300 sheets/min Min. format (W x L): 60 x 105 mm Max. format (W x L): 210 x 340 mm Manufacturer: GUK Year of manufacture: 2017 Space requirement: 130 x 70 x 80 cm

Condition: used, Year of construction: 2004, operating hours: 19,000 h, machine/vehicle number: D35601, The Senzani CM5 is a continuously operating, vertical cartoning machine from Senzani Brevetti, specifically designed for the precise packaging of individual items such as capsules, pouches, or smaller packaged products into pre-glued folding cartons. Machine features: Operating principle: Continuous motion for high process stability. Application: Vertical filling of pre-glued cartons, often combined with counting and dosing systems (coffee or tea capsules, lawn seeds, muesli, or pet food). Integration: Seamless integration into fully automatic primary and secondary packaging lines is possible. Podpfx Amezp Iw Heyspw The machine operated for almost 19 years at Flechtorfer Mühle, where it was only used to fill one product. After being taken over by a birdseed company, it successfully completed a test run. Following the sale and a longer period without power, a software update from Senzani is necessary, costing approximately €12,000. A metal detector is included in the offer. A pendulum cup feeder can be purchased separately to ensure consistent feeding.

Condition: excellent (used), Year of construction: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pedpfx Aov Htniemyspw Pre-bending: 20.0 mm CNC control Top roller diameter: 320 mm Middle roller diameter: 320 mm Side roller diameter: 240 mm Hardened rollers Conical bending device by tilting the two side rollers Mobile control panel with digital display Engine power: 11 kW CE mark Dimensions (length x width x height): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: used, machine/vehicle number: 76271002, sheet width:2040 mm Ppodpscxxq Eefx Amyow plate thickness:1,2 mm total power requirement:2,5 kW weight of the machine ca.:2,0 t dimensions of the machine ca.:3,0 x 1,6 x 1,7 m

Condition: used, machine/vehicle number: ubk., sheet width:6060 mm plate thickness:2 mm total power requirement:7,5 kW weight of the machine ca.:6,75 t Psdpfxjcxxuqo Amyspw dimensions of the machine ca.:7,0x2,0x2,5(LxBxH) m

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Ppodpfszbcwmjx Amyow Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use Ppedoza D U Dspfx Amyow The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Podpox Ii Hvsfx Amyopw Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2006, Technical specifications: Working width: 2100 mm Bending capacity: 28.0 mm Springback: 22.0 mm CNC control Diameter of upper roller: 350 mm Diameter of middle roller: 330 mm Diameter of side rollers: 240 mm Hardened rollers Conical bending unit by inclining the two side rollers Psdpfxex Dtt Ae Amyopw Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (length x width x height): approx. 3600 x 1500 x 1500 mm Weight: approx. 14.5 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2026, Claw machine lift with an impressive lifting capacity of 20 tons is an excellent tool for industries that require huge loads. Equipped with a robust design and innovative technical solutions, this claw lift ensures efficiency, safety and reliability in every application. The main distinguishing feature of the claw jack is its claw lifting mechanism, which allows for reliable and precise gripping of various objects. Thanks to this, handling large and non-formine loads becomes much more efficient, and the operator has full control over the lifting process. The lift with a lifting capacity of 20 tons is not only strength, but also protection against failures, it guarantees safe lifting and transport of heavy loads to high altitudes. The claw lift design has been carefully designed to ensure maximum stability during operation. The solid frame and durable materials make the jack cope with difficult industrial conditions while maintaining full functionality and reliability. To sum up, a machine claw machine lift with a lifting capacity of 20 tons is a powerful tool that will meet even the most demanding industrial tasks. Its impressive load-bearing capacity and precise claw mechanism make it an invaluable support in the area of lifting and moving large loads in a variety of working environments. Ppodpovvk D Hsfx Amyow Technical data: Maximum static load 20T Maximum lifting capacity at the head of the lifter 15T Maximum lifting capacity at the lifting foot 12T Minimum height (foot/head) 40 / 325 mm The hight of raising 140 mm Screw pin adjustment 0-60 mm Net weight 68 kg

Condition: new, Year of construction: 2026, Constructed from high-quality materials, this lift features a solid construction, ensuring durability and reliability in extreme operating conditions. The solid frame and stable platform enable the handling of even the heaviest loads, while ensuring stability and operator safety. Thanks to advanced control systems, the operation of the 10-ton machine lift becomes intuitive and precise. The operator can easily adjust the lifting height and smoothly control the speed, which enables effective work in various conditions. The claw lift is also equipped with a screw pin on which we can also lift machines or heavy objects. The safety of use of the 10-ton machine lift is a priority, which is why it is equipped with safety systems. To sum up, the 10-ton machine lift is an irreplaceable tool for industries requiring lifting and moving large and heavy loads. Thanks to its solid construction, ease of use and priority on safety, this lift provides invaluable support in everyday industrial tasks. Technical data: Maximum static load 10T Maximum lifting capacity at the head of the lifter 7,5T Maximum lifting capacity at the lifting foot 6T Ppjdpfx Amsvvk Aieyow Minimum height (foot/head) 35 / 320 mm The hight of raising 160 mm Screw pin adjustment 0-80 mm Net weight 25 kg

Condition: excellent (used), Year of construction: 2009, Folding machine in excellent condition, changed all fold rollers, air suction feeder with alignment rail, total and batch counter, double sheet control, four manual adjustable fold plates, max. 350 x 450 (640) mm min. 85 x 120 mm fold length from 50 to 360 mm paper weights from 40 up to 250 g/m² Ppodpspdnlhjfx Amyew speed up to 160m/min 230 V / 10A