Used Atlas Copco Ga 11 Ff for sale (389)

Condition: used, Year of construction: 2001, pressure (max.): 10 bar, Screw Compressor Manufacturer: Atlas Copco Type: GA 11 FF Year of Manufacture: 2001 Technical Specifications Manufacturer: Atlas Copco Gksdjwivluepfx Afisc Type: GA 11 FF (with integrated refrigeration dryer) Year of Manufacture: 2001 Floor-Mounted Design Control System: Elektronikon Max. Operating Pressure: 10 bar Motor Speed: 3000 rpm Rated Power: 11.0 kW Dimensions: L 1.2 x W 0.70 x H 1.40 m Weight: 475 kg All information is subject to change. A live demonstration is available at any time in our showroom.

Condition: used, functionality: fully functional, An industrial air compressor is a machine used to increase the pressure and flow of compressed air to power various industrial tools, equipment and processes. Gjdpfx Aswnxzisfiokc

Condition: excellent (used), Year of construction: 2018, operating hours: 10,236 h, functionality: fully functional, Screw compressor Atlas Copco GA110VSD+FF. 110 kW with 13 bar and 20.70 m3/min. Gsdownnu Ejpfx Afiokc Frequency controlled and integrated dryer. Year of manufacture 2018 with only 10,000 hours.

Year of construction: 2021, condition: new, Maximum pressure: 8.5 bar effective delivery rate: 2,1 m³/min Gedpokqu Irofx Afiekc engine power: 11 kW dimensions L/W/H: 1.267 / 790 / 1.590 mm weight: 451 kg compressed air connection: G1 included: - Heat recovery - UD+ filter - Dryer energy saving control Only while stocks last. Subject to prior sale. Payment in advance. Delivery ex works within the EU.

Condition: used, Year of construction: 2017, operating hours: 20,000 h, functionality: unexamined, machine/vehicle number: GA11VSD+FF, Compressor compressed air system Gjdpsvx Nmfjfx Afiokc Atlas Copco Consisting of: Compressor GA18 Plus, year of manufacture 2007 Compressor GA11VSD+FF, year of manufacture 2017 Control ES 6 The buyer must take care of the professional dismantling himself. Forklift is provided.

Condition: excellent (used), Year of construction: 2017, operating hours: 29,000 h, inverter compressor with integrated dryer technical specifications maximum pressure: 13 bar power: 55 kW / 75 hp Gjdpfx Ajxl Tpyofiokc capacity: 9960 litres/min current list price for new compressor: €94,655

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Gedov Rmmmepfx Afiskc

Year of construction: 2006, condition: ready for operation (used), Two identical Atlas Copco compressors including external heat recovery are available. Drive power: 132kW, max. operating pressure: 13bar, volume flow: 17m³/min, water temperature at 90kW: 90°C/70°C, machine dimensions X/Y/Z: approx. 2800mm/1900mm/2000mm, weight: approx. 3200kg, operating hours 1/2: 64290h/64765h. Including bypass flap for air cooling and electrical main switch. Documentation available. On-site inspection is possible. Expected to be available from mid-April 2025. Gedpfjv N Iz Aex Afijkc

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Gjdpfxju Rptyo Afijkc Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: APÜI298304, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS Maximum pressure: 8.5 bar Flow rate: 31.4 l/s Motor power: 11 kW Gkodpfowvh H Dox Afijc Motor speed: 2,940 rpm MACHINE DETAILS Dimensions: 1,250 mm x 680 mm x 1,430 mm Weight: 410 kg

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Pressure 13 bar Mileage 13200 hours The compressor is fully functional. Gsdpfx Afot Hdh Nsiokc

Condition: ready for operation (used), Year of construction: 2012, operating hours: 30,000 h, functionality: fully functional, power: 37 kW (50.31 HP), fuel type: electric, operating pressure: 13 bar, pressure (max.): 12.5 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco GA 37 VSD FF - used premium screw compressor Speed-controlled screw compressor, air-cooled, oil-injected, full feature incl. integrated refrigeration dryer incl. heat recovery system Used device from year of manufacture 2012, functional, approx. 30,000 operating hours, without warranty Technical data: Godovcmwcjpfx Afiokc Motor power: 37 kW Refrigeration dryer: integrated Compressed air connection: G 1/2" Dimensions in mm (LxWxH): approx. 1766x970x1800 Weight: approx. 1,130 kg Max. pressure: 12.5 bar Volume flow: at 4 bar up to 7.43 m3/min, at 7 bar up to 7.32 m3/min, at 9.5 bar up to 6.40 m3/min at 12.5 bar up to 5.24 m3/min

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Gjdpfxswlp Hdj Afiekc Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Year of construction: 2000, condition: ready for operation (used), Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible. Gkodpfx Afowfg Hhjijc

Condition: excellent (used), Year of construction: 2009, overall weight: 444 kg, volume flow: 1.7 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 11 VSD screw compressor Variable speed (inverter) Godpfx Afev Sm Umeiekc On a 500 l pressure tank 11 kw engine Efficiency 1.70 m3/min Pressure 10 bar Year of production 2009 Compressor after service, filter and oil replacement.

Condition: excellent (used), Year of construction: 2018, operating hours: 29,358 h, functionality: fully functional, Screw compressor Atlas Copco GA110VSDFF. Year of manufacture 2018 with approximately 29,358 operating hours. 110 kW with 8.30 bar and 21.60 m3/min. Gkodpfx Afew Da Ntsisc

Condition: good (used), Year of construction: 2020, machine/vehicle number: ITJ400414, overall weight: 264 kg, volume flow: 96 m³/h, pressure (max.): 8.25 bar, Equipment: refrigerant dryer, type plate available, We offer: ATLAS COPCO GA11FF SN: ITJ400414 YEAR: 2020 CAPACITY: (kW) 11 OUTPUT: (m3min) 1.6 CIS: (bar) 8.25 Godpfxov Dr Dwj Afiokc INVERTER: no BUILT-IN DRYER: yes EXCHANGER: no COOLED: (AIR) air ON THE TANK: no DOCUMENTS: no NEW/USED: USED

Condition: like new (used), Year of construction: 2019, operating hours: 1,998 h, functionality: fully functional, As-new screw compressor Atlas Copco GA75VSD+FF. 75 kW with 13 bar and 13.50 m3/min. Year of manufacture 2019 with only 1998 hours. Gkedpfexlhgyox Afisc

Condition: used, Year of construction: 2016, operating hours: 30,370 h, functionality: limited functionality, machine/vehicle number: API261282, overall weight: 279 kg, power: 15 kW (20.39 HP), volume flow: 150.6 m³/h, pressure (max.): 12.75 bar, Equipment: refrigerant dryer, type plate available, The time and date function is defective, which is why we are selling it. Otherwise, the compressor works perfectly. Gsdpfx Afexdw Tyeiekc

Condition: like new (used), Year of construction: 2018, operating hours: 24,655 h, functionality: fully functional, Atlas Copco GA45VSD+FF premium screw compressor. Gkjdpfx Afjv Th T Tjijc 45 kW at 13 bar and 9.40 m3/min. Built in 2018 with approximately 24,000 hours. Integrated dryer. Frequency-controlled.

Condition: ready for operation (used), 4000 werkuren!!! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric voltage: 3 x 380V - 50Hz Gkodpfx Afjxl Hxboisc Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Volume flow rate: 18.3 m3/min Power imput: 90kW Volume (L): 1500 L

Condition: good (used), Year of construction: 2013, overall weight: 1,519 kg, power: 75 kW (101.97 HP), volume flow: 14.85 m³/h, pressure (max.): 12.8 bar, Air Compressor Atlas Copco GA75VSD FF Technical Data Manufacturer: Atlas Copco Airpower Model: GA75VSD FF Year of manufacture: 2013 Maximum pressure: 12.8 bar Free air delivery: 14.85 m³/min Motor power: 75 kW Gksdjxk U Alepfx Afijc Motor speed: 3,000 rpm Weight: 1,519 kg Power supply: 400 V 50 Hz 3 phase Design: Oil-injected screw compressor Control: Electronic control panel Origin: Made in Belgium No liability is accepted for the correctness, completeness, or up-to-dateness of the information provided.

Condition: repair required (used), Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in the current condition as viewed -defective, not functional, problem: frequency converter does not communicate with the software -Delivery quantity: 3.2-6.9 m³/min -Engine power: 18-24 kW Gkodohabk Depfx Afiec -Construction: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of construction: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Condition: like new (used), Year of construction: 2023, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,081 kg, power: 75 kW (101.97 HP), volume flow: 1,500 m³/h, operating pressure: 13 bar, We have two Atlas Copco compressors and one oxygen generator type Oxymat ( Oxygen PSA. ) Hopefully the equipment will be sold together. Detailed description in documents attached. But we can say that the two compressors will have a capacity of 798 Nm3 each and the PSA can produce approx 250Nm3 oxygen per hour with purity of 93% +-1% Gsdpfxoxhdb Ss Afiekc

Year of construction: 2008, condition: ready for operation (used), 1) Reciprocating compressor Prematic PAKO 1201/270, year of manufacture: 2008, displacement: 1200L/min, flow rate: 925L/min, tank volume: 270L, speed: 700rpm, power: 7.5kW, operating pressure: 10bar, operating hours: approx. 5257h. 2) Screw compressor Atlas Copco GA7FF, year of manufacture: 1999, operating pressure: 8bar, flow rate: 1092L/min, power: 7.5kW, speed: 3000rpm, weight: approx. 250kg, operating hours: 14057h. Documentation available. An on-site inspection is possible. Gjdpfxoxf Iinj Afiokc