Used Emco Maxxmill 500 for sale (139)

Condition: good (used), travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, Manufacturer: EMCO Type: MAXXMILL 500 new 2014 Control system: SIEMENS 840D Year of construction: 2014 High preformance spindle 34,5 kW and 110 Nm torq One setup to machine 500 x 500 x 475 mm (5 sides) Kedpfotw Rnfox Afionc Top machine for medium production runs 15 to 300 pieces 3560 Spindle hours Specifications Metric US Standard X - axis 650 mm Y - axis 550 mm Z - axis 500 mm A - axis -100 to +100 ° B - axis 360.000 ° Table length 600 mm Table width 600 mm Table load 250 Feed X - axis 30000 mm/min. Feed Y-axis 30000 mm/min. Feed Z-axis 30000 mm/min. Tool holder ISO 40 ISO/Bt/Mk Spindle power 34 kW kW Spindle speed 10000 rpm Tool changer 30 IKZ 20 Number of controlled axes 5 Chip conveyor Yes Cooling device Yes Dimensions (estimate) Length 2900 mm width 3300 mm height 3000 mm weight 9200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: ready for operation (used), Year of construction: 2002, Used CNC Lathe EMCOTURN ET-500x1500 WORKING AREA Kedjwxrdfepfx Afionc Swing diameter over bed: 580 mm Swing diameter over cross slide: 400 mm Maximum turning diameter: 450 mm Longitudinal travel (Z-axis): 1,060 mm / 1,560 mm Cross travel (X-axis): 310 mm Distance between centers: 1,500 mm WORKPIECE SIZE Max. workpiece length: 1,500 mm Max. workpiece diameter for bar stock: 102 mm Max. workpiece weight between centers: 1,200 kg Max. workpiece weight with unsupported end: 400 kg Center of gravity distance from chuck mounting surface: 175 mm SPINDLE HEAD Spindle mount DIN 55026: A2-8 (ASA 8") Front spindle bearing diameter: Ø 150 mm Spindle bore: Ø 103 mm Draw tube/bar capacity: Ø 90 mm MAIN DRIVE Digital AC motor: SIEMENS ZF gearbox on main motor: (100/40 % duty cycle) 28 / 43 kW Main spindle speed: 2 steps Speed range 1: 40 – 850 rpm Speed range 2: 40 – 3,200 rpm Max. torque: 909 / 1,396 Nm Option: 952 / 1,125 Nm FEED DRIVES digital AC Ball screw diameter X / Z: 40 mm Feed force, longitudinal (Z-axis): SIEMENS 13,570 N / FANUC 10,180 N Feed force, cross (X-axis): SIEMENS 9,050 N / FANUC 7,000 N Rapid traverse X / Z: 20 / 20 m/min Positioning accuracy Ps (VDI 3441) X,Z: 0.006 / 0.007 mm TOOL SYSTEM Number of tool stations: 12 Tool holders per DIN 69880 AXIAL Tool mounting: VDI-40 Performance of driven tools Speed: max. 8 kW at 3,000 rpm Torque: max. 27 Nm at 3,000 rpm TAILSTOCK Positioning: carriage drag automatic Clamping: automatic Quill diameter: 100 mm Quill stroke: 120 mm Internal taper: MT 4 Quill pressure, steplessly adjustable up to: 14,500 N Y-AXIS Y-slide travel: +50 / -50 mm COOLANT SYSTEM Tank capacity, version 1,000 / 1,500: 200 / 230 l Coolant supply: via tool turret At 50 Hz: 7.0 bar at a delivery rate of 5 l/min 0.5 bar at a delivery rate of 57 l/min Weight approx. 9 t Note! This machine will be available from mid-January 2026, as a new machine is arriving then. The machine can be inspected under power near Memmingen by appointment. We can provide loading. Buyer is responsible for transport. Technical data, accessories and machine description are non-binding.

Condition: used, Year of construction: 2017, Emcomat E300 for sale. The machine was manufactured in 2017. Machine type: EM300x1500 SIEM Some repairs have been carried out and the following defects are known to us: Geometry checked. Z-guides in the area of the main spindle (chuck) are slightly worn. Knodpfxsw I S Uus Afioc Z-slide tilts in X and Y under load up to 0.1mm; in this range, precise work is no longer possible at higher clamping pressure. Tool changer checked and adjusted. X-axis belt replaced and machine zero point set. Automatic band lubrication oil loss – troubleshooting performed, problem resolved, lubrication oil line renewed. Machine is operational – with reservation regarding Z-axis guidance.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56,089 h, Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Knodpfxow Dfhue Afiec

Condition: excellent (used), Year of construction: 2023, Work Area Longitudinal slide travel (X) 350 mm Cross slide travel (Y) 250 mm Usable vertical slide travel (Z) 300 mm Distance spindle nose – table surface (min.-max.) 120 – 420 mm Milling Table Cast iron table, ground Clamping surface (LxW) 520 x 300 mm Table surface height above floor 900 mm Max. table load 100 kg Number of T-slots 5 T-slot size acc. to DIN 650 12 mm T-slot spacing 45 mm Milling Spindle Speed range – direct drive 0 – 10,000 rpm (Three-phase asynchronous motor) Torque (100/60% DC) 33 / 41 Nm Power (100/60% DC) 7 / 8.5 kW Tool holder per DIN ISO 69871-A SK 30 Pull stud per DIN ISO 69872 (similar to 7388/2) M12, Type A Tool holder balanced G2.5 (per DIN ISO 1940, at 10,000 rpm) Slide Drives (Servo Motors) Feed rate in X / Y / Z 24 m/min Rapid traverse speed in X / Y / Z 24 m/min Feed force in X / Y / Z 3000 / 3000 / 4000 N Mean positional scatter per VDI 3441 in X / Y / Z 4 / 4 / 4 µm Tool Magazine Tool changer based on S-arm principle with random management Number of tool stations 20 Direct tool change time 2.5 s Max. tool diameter Ø 63 mm Max. tool diameter with adjacent slot empty Ø 80 mm Max. tool length 200 mm Max. tool weight 5 kg Clamping force 1500 N Max. total tool magazine load 60 kg Coolant System (Option) Coolant supply at milling spindle via 3 nozzles Tank capacity (standard) 140 l Delivery pressure at 50 Hz 3.5 bar Flow rate at 3.5/1 bar 15 / 65 l/min Pneumatics Supply pressure 6 bar Connection line Ø 10 mm Supply volume 50 l/min Compressed air quality per DIN ISO 8573-1 Purity class 4 Lubrication System Main spindle bearings Lifetime grease lubrication Guideways automatic central oil lubrication Feed screws automatic central oil lubrication Electrical Connection Power supply 3/PE 400~ V Max. voltage fluctuations +10 / -10 % Frequency 50 / 60 Hz Machine connected load 9 kVA Max. main fuse for machine 20 A gG Required short-circuit power 700 kVA Dimensions / Weights Overall height 2200 mm Installation area (WxD) (excluding coolant and options) 1600 x 1710 mm Total machine weight 1970 kg (excluding coolant and options) Coolant tank (standard, empty) 60 kg Chip Conveyor Hinged belt conveyor for wet and dry machining Discharge height 500 mm Kedpfx Ajw N Nvlofionc 4th Axis / NC Rotary Table Resolution 0.01° Max. speed 44 rpm Max. torque 20 Nm

Year of construction: 2019, condition: ready for operation (used), General Data Machine weight 1500 kg Control Unit Brand SIEMENS Model Sinumerik 828D Knsdpoxp Sncofx Afioc Main Drive Spindle speed range 50–4000 Number of axis 2 This EMCO Emcomat E-200 MC was manufactured in 2019. A robust horizontal turning machine featuring a distance between centers of 1000 mm, center height of 200 mm, and a spindle speed range of 50-4000 rpm. It includes a tailstock and ball screws on X and Z axes. Weighing 1500 kg, this demo machine is in excellent condition, like new. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 340 mm Kedpfx Aju Ixw Ajfijnc turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs *

Condition: used, Year of construction: 2010, turning diameter 220 mm turning length 310 mm control Siemens 810 D powerline turning diameter over bed 430 mm hollow 45 mm spindle tunring speed 6.300 U/min x-travel 160 mm z-travel 310 mm number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - C-axis - Documentation - Backup - EMCO LM 800 bar loader Accessories, tools, and clamping devices shown are only included in the scope of delivery Knjdpfexp R Eajx Afiec if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2005, functionality: fully functional, For sale: CNC Turning Center EMCO Turn 325-II (Year 2005) Condition: Good, technically sound. Manufacturer: EMCO Maier GmbH (Austria) Model: Turn 325-II Year of manufacture: 2005 A compact and reliable CNC turning center suitable for metal part machining, threading, and milling in small to medium-sized production runs. Main technical specifications: (based on EMCO Turn 325-II model specification) Control: Siemens Max. turning diameter: 250 mm Max. turning length: 500 mm Spindle speed: up to 5000 rpm Tool turret: 12 positions (automatic tool changer) Max. tool length: 100 mm Motor power: approx. 15 kW Knsdpfxjxp Iyhj Afioc Cooling: integrated cooling system Power supply: 400 V / 50 Hz Machine weight: approx. 3500 kg If you have additional questions, we are happy to assist.

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Kjdoxp Hudjpfx Afionc

Condition: used, Technical Data: Centre height: 275 mm Distance between centres: 3000 mm Swing diameter over bed: 550 mm Swing diameter over cross slide: 340 mm Spindle bore: 105 mm Spindle nose: Camlock 8" Speed range: 0 - 2500 rpm Motor power: 19.5 kW Equipment: - CNC control FAGOR 8055 - 4-position turret head Knodpfx Aexpgrpofisc - 3-jaw chuck ø 315 mm - Steady rest

Year of construction: 2005, condition: ready for operation (used), Main Drive Number of axis 2 Movement X-Axis Movement 260 Z-Axis Movement 610 Media Chip conveyor Yes Additional Equipment Knedpfx Ajxpyvzjfijc Bar Feeder: Equipped with Emco bar loader Chip Conveyor: Included Part Catcher: Integrated turret has 12 positions (all are driven) maximum bar diameters that can be processed are Ø65mm due to the drawtube VDI 30 This EMCO Turn E65 was manufactured in 2005. A horizontal turning machine equipped with an Emco bar loader, chip conveyor, and an integrated part catcher. It features a single turret with driven tools, enhancing its functionality. If you are looking to get high-quality turning capabilities, consider the EMCO Turn E65 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Kedou N Avxjpfx Afienc Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Condition: used, Year of construction: 2005, Machine used for training purposes Emco E 65, year of manufacture 2005, control Siemens 840 D, Knjdowv N Suopfx Afioc travel X/Z 210/610 mm, maximum bar capacity Ø 65 mm, driven tools, C axis, main spindle up to 4,200 rpm, 12-position turret, VDI 30 tool holder, tailstock, chip conveyor, coolant system, oil mist extraction,

Condition: good (used), Year of construction: 2005, Control: FANUC Series Oi-TC Max. turning diameter: 310 mm Max. part length: 520 mm Max. bar diameter: 65 mm Travel: X = 210, Y = 610 mm Turret with 12 stations All driven tools Spindle speed range: 60–4,200 rpm Without tailstock Chip conveyor Kedpjww H T Eefx Afionc EMCO bar feeder

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,261 h, functionality: fully functional, machine/vehicle number: M-077.084.07, empty load weight: 4,800 kg, Equipment: chip conveyor, MACHINE DETAILS Weight: 4,800 kg Operating Hours Spindle hours: 11,261 h Control system on hours: 125,668 h Kjdpfx Aoxpvwzefionc EQUIPMENT Conveyor belt (FAMUP 405-1498-1, 352 kg)

Condition: repair required (used), Year of construction: 2010, functionality: not functional, machine/vehicle number: M-075.068.10, feed length X-axis: 750 mm, feed length Y-axis: 500 mm, feed length Z-axis: 640 mm, spindle speed (max.): 12,000 rpm, spindle speed (min.): 50 rpm, table width: 520 mm, table length: 900 mm, CNC milling machine Emco MC 75/50 Machine No.: M-075.068.10 Year of manufacture: 2010 including 30 tool holders SK40 with pull studs including 4th rotary axis including vises including numerous tools and holders including coolant concentrate ATTENTION: Machine is being sold as in need of repair. Machine control is defective: Heidenhain MC420 including documentation and operating manual sold without warranty or guarantee Ksdjxn Hy Ropfx Afisnc

Condition: ready for operation (used), Year of construction: 2019, Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 10–5000 Number of axis 3 Movement X-Axis Movement 450 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Tools Type of tool holder SK40 Kodpfx Aexpklaefijnc This 3-axis EMCO Emcomat FB-450 MC was manufactured in 2019. It features a travel range of X450/Y350/Z400 mm, a fixed angle table of 800x400 mm, and a table load capacity of 450 kg. The spindle speed reaches up to 5000 rpm, complemented by a rapid traverse of 5000 mm/min. Includes a Sinumerik 828D interface with multi-touch display and a comprehensive 3-axis control package. If you are looking to get high-quality milling capabilities consider the EMCO Emcomat FB-450 MC machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 260 mm turning length: 610 mm facing movement (x-axis): 160 mm longitudinal traverse (z-axis): 610 mm control: Siemens 810D revolution per minute: 1 - 6300 steples U/min max. torque on the spindle: 86 Nm spindle passage: Ø 42 mm external spindle dia. in forward position: Ø 80 mm feed motor: X/Z: 5000 / 7000 N Knedpfx Afsu Ixwijijc rapid motion - x-axis: X/Z: 16 / 20 m/min tool turret - number of stations: 12 / VDI 30 tailstock taper ISO: MK4 tailstock adjustment: 500 (Hub) mm Main spindle capacity: 7,5 (100%=11kW) kW electrics - voltage/frequency: 3/PE ~ 400V und 50/60Hz V/Hz total power requirement: 20 kVA (11 kW) Weight approx.: 4,0 t dimension machine xH: 3,0 x 2,0 x 2,1 m Further technical specifications: C-axis Distance main spindle - tailstock: 805 mm Power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Coolant device, coolant supply via tool turret Switch cabinet with cooling, Rittal type SK3393100 Workpiece collecting tray Machine lighting Accessories: 1x driven tool i.D. *

Condition: good (used), Year of construction: 2000, Emco Emcoturn 365-65, Year of manufacture 2000, Siemens 810 D control system, X/Z travel 210/610 mm, 12-station VDI 30 turret, all stations driven, driven tools up to 4,000 rpm, collet chuck, tailstock, C-axis 0.001°, spindle speed up to 6,300 rpm, Kedpfx Afewd E N Soionc coolant system, chip tray, accessories, Machine has exclusively machined aluminum and brass, Machine is available at short notice.

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Number of spindles 2 Spindle speed range 6300 Spindle motor power 10 KW Number of axis 4 Media Chip conveyor Yes Additional Equipment Kedpfx Asxmbypjfionc Emco standard bar feeder interface Oil mist separator 2 coolant pumps for spindle flushing 2 high-pressure coolant pumps (10 bar) Parts ejector with flushing through counter spindle Short bar feeder This 4-axis EMCO TURN 332 MCPlus was manufactured in 2006. It features a CNC lathe with a drive power of 10 KW, main spindle speeds up to 6300 rpm, and counter spindle speeds up to 7000 rpm. Equipped with two 12-slot tool turrets VDI 25, it supports up to 24 driven tools. The machine includes a Sinumerik 840D control, chip conveyor, and a bar feeder for bars ranging from 6-45 mm in diameter. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2008, Technical details: Knodjvvtpxspfx Afisc turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler With hinged chip conveyor Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! *

Year of construction: 2004, condition: ready for operation (used), Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Number of spindles 2 Spindle speed range 6300 Spindle motor power 10 KW Number of axis 4 Table Number of tslots 12 Turret Number of turrets 2 Tool taper VDI 25 Kedpfx Afoxmby Aoisnc Media Chip conveyor Yes Additional Equipment Oil mist separator 2 coolant pumps for spindle flushing 2 high-pressure coolant pumps (10 bar) Parts ejector with flushing through counter spindle Bar feeder This 4-axis EMCO TURN 332 MCPlus was manufactured in 2004. It features a CNC lathe with dual spindles capable of speeds up to 6300 and 7000 rpm respectively, and two 12-slot tool turrets. Includes high-pressure coolant systems, a chip conveyor, and a bar feeder for efficient operation. Ideal for precision turning tasks. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 1990, Technical details: Kjdpfxevc Awrs Afienc x-travel: 185 mm y-travel: 95 mm z-travel: 200 mm control: emco tronic TM02 spindle taper: SK 30 range of revolution per miute: 10 - 4000 / steples U/min feed continuous: 1 - 2000 / steples mm/min. rapid traverse: ca. 3,0 m/min tool turret - number of stations: 10 interface: R 232 table surface area: ca. 420 x 125 mm total power requirement: 0,8 kW machine dimensions LxWxH: 2,1 x 0,9 x 2,0 m EMCOTRONIC TM 02 control panel Operating modes: Manual operation (manual) and/or automatic Coolant system (with feed to the milling spindle) Operation via control panel standing on 3 swivel wheels Pneumatic door protection *

Condition: used, Year of construction: 1995, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 800 x 400 mm Kjdpfx Afsvbhcdjijnc range of revolution per miute: 63 - 3150 / 18 step U/min feed continuous: X/Y/Z: 8 - 800 / 8step mm/min. spindle taper: SK 4 spindle head swivable left - right: 90 ° quill stroke: 105 mm total power requirement: 5,3 kW weight of the machine ca.: 2245 kg machine dimensions LxWxH: 2,1 x 2,8 x 1,9 m Control screen replaced with new LCD. The milling machine is equipped with measuring system with digital display PROTOTRAK MX2. The X and Y axes can run cycles. (interpolation), the Z-axis is moved manually. Spindle with right/left travel Automatic tool clamping via control command Coolant device (without container) Chip collection tray Tool accessories (comparable in the photo) *