Used eccentric presses single column 55-99t for sale (109)

Year of construction: 1971, condition: good (used), Pressing force: 63 t Table: 660 x 480 mm Slider: 450 x 280 mm Cgjdsh N S Sdjpfx Ailjw Overhang: 250 mm Slider stroke: 16 to 125 mm Sheet thickness, continuous stroke: 3.2 mm Max. distance between table and slider: 417 mm Die opening: 280 x 250 mm Slider adjustment downwards: 70 mm Stroke rate: 80/min Power consumption: 6 kW Accessories/equipment: Condition: good Weight: 5 t Dimensions: 1,500 x 1,600 x 2,700 mm

Condition: used, Year of construction: 2000, functionality: limited functionality, power: 4 kW (5.44 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 50 t, stroke length: 100 mm, table width: 770 mm, table length: 530 mm, table height: 58 mm, ram plate width: 450 mm, ram plate length: 300 mm, distance table to ram: 275 mm, overall weight: 3,500 kg, Equipment: CE marking, TECHNICAL SPECIFICATIONS: Press Model: T50 CNR4 Year of manufacture: 2000 Nominal force: 500 kN Mass: 3,500 kg Strokes per minute: 90 Max. insertions per minute: 41 Operating air pressure min./max.: 4 to 5.5 BAR Safety distance: 187 mm Adjustable stroke min./max.: 8 to 100 mm Ram adjustment: 70 mm High PMI adjustment: 280 mm Maximum extraction stroke: 30 mm Worktable surface: 770x530x58 mm Ram plate dimensions: 450x300 mm Distance table to ram: 275 mm Csdpfxoy Etqaj Ailogw Shank diameter: 45 mm Throat depth: 270 mm Max. die size: 450x300 mm

Condition: used, Year of construction: 1959, pressure 063 t throat 280 mm Cgedpfjyx Ih Hex Ailow stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 550 mm table surface area 630 x 500 mm hole in the table 230 mm table height over floor 740 mm table adjustable 200 mm ram surface 320 x 260 mm ram adjustment 63 mm power capacity 5,5 kW weight 4,6 t Dimensions (WxDxH) 1,4 x 1,8 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual centralized lubrication, two-hand operation Press is currently under revision

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, TECHNICAL SPECIFICATIONS: Press Model: T100 CNR4 Year of manufacture: 2002 Nominal force: 1000 kN Weight: 7,000 kg Strokes per minute: 65 Maximum insertions per minute: 22 Operating air pressure min./max.: 4–5.5 BAR Stopping time: 0.195 s Safety distance: 312 mm Cgsdpey D R N Rofx Ailjw Energy: 8493 KJ Adjustable stroke min./max.: 10–130 mm Ram adjustment: 100 mm P.M.I high adjustment: 370 mm Maximum extraction stroke: 55 mm Worktable surface: 950x660x68 mm Ram plate dimensions: 540x450 mm Shank diameter: 60 mm Projection from center: 330 mm Max. die size: 540x450 mm Upper die weight: 180 kg Voltage: 400 V Hydraulic overload Complete with user manual and CE declaration of conformity Mechanical warranty: six (6) months Electrical panel warranty: twelve (12) months NEWLY INSTALLED COMPONENTS: • Motor • Flywheel bearings • Rotary joint bearings • Countershaft bearings • Clutch plates • Clutch pins and flanges • Clutch seals • Hydraulic overload seal • Hydraulic overload hose • Oil pump guide pressure gauge • Oil pump guide float • Hydraulic overload pump • Air pressure switch • Front and side safety guards with safety interlock keys • Worktable surface reconditioned on CNC machine • Foot pedal control • Electrical panel with remote assistance

Condition: good (used), Year of construction: 1984, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: HELMERDING hiw, Single-column eccentric press type ERVL65B -Pressure capacity: 65 tons Cgedeywzh Rspfx Ailjw -Coupling: pneumatic -Drive: 5.0/6.0 kW 1440/2890 rpm -Stroke: adjustable 14 - 90 mm -Table size: 590 x 740 mm -Table cutout: 140 x 240 mm -Protrusion: 310 mm -Punch holder: Ø 40 mm -Insertion height 340 mm -Dimensions: 2070/1050/H2140 mm -Weight: 4430 kg

Condition: used, Year of construction: 1971, machine/vehicle number: 7130, Capacity: 60 ton Throat depth: 275 mm Ram stroke: 5 -100 mm Shut height (stroke down, adjustment up): 375 mm Table surface area : 740 x 470 mm Number of strokes: 14 - 100 s.p.m. Required power: 10 kW Dimensions L x W x H: 2.300 x 1.500 x 3.000 mm Weight of machine approx.: 3,5 ton Csdsuqcxnjpfx Ailegw

Year of construction: 1972, condition: used, machine/vehicle number: 51512/72, pression: 75 t throat: 300 mm Cgodpfx Aob Tdquoilsw table size: 620 x 800 mm clearance hole in the die: 225 x 325 mm table adjustment: 175 mm tappet area: 180 x 475 mm tappet adjustment: 80 mm stroke adjustment: 16 - 140 mm number of strokes: 90 /min engine: 380 V, 3 kW space needed: 1700 x 1200 x 2500 mm weight: 3,3 t

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 58200 € 1099.98 € 80 to 4 mm 600 mm 900 mm 200 mm 1 - 110 mm 60 1/min 6 80 mm 50 mm 300 mm 400 mm 7.5 kW 1600 mm 1500 mm 2750 mm 5700 kg Welded steel frame construction 6-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency converter Operating modes: Adjustment mode Two-hand release Cjdpfx Aewiq I Deiljgw Foot release 2-stroke operation via light barriers Continuous operation Touchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations (sample photos) OPTIONS: vibration pads € 192,00 bolster plate o.r. hydr. overload safety device o.r. etc.

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: A5137, functionality: fully functional, Refurbished 100-ton HEILBRONN C-press, currently undergoing retrofitting - available at short notice. Hydraulic clutch-brake combination, automatic central grease lubrication, manual ram adjustment, mechanical overload protection, new lubrication/hydraulic hoses, etc., new control system (adjustments still possible). Dimensions - see machine drawing as PDF. Technical specifications: Press force: 1,000 kN Speed: 50 rpm (variable speed optional) Variable stroke: 14 - 150 mm Ram adjustment: 80 mm Installation height: 420 mm (max. stroke at bottom, adjustment at top) Cgsdswb A Dzspfx Ailow Table: 650 x 500 mm Ram: 400 x 250 mm Thrust: 350 mm Drive power: 5.5 kW Approx. weight: 5,500 kg

Condition: new, Year of construction: 2022, functionality: fully functional, Table size: 600 x 900 mm Maximum pressing force: 800 kN Stroke length: 0–110 mm Maximum tool size: 400 x 580 mm Motor power: 7.5 kW Voltage: 380 V Weight: 5700 kg Dimensions L x W x H = 1600 x 1500 x 2750 mm Accessories, Equipment - Oil-bath gearbox - Pneumatic clutch-brake combination Cedpoyr Nv Rjfx Ailjgw - PLC control for safety - Photoelectric sensors - Motorized adjustable slide - Mechanical overload protection - Two-foot and hand pedal control - Adjustable stroke (inverter) - Automatic central lubrication

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication Codpfxok S Htxj Ailjgw - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 48500 € 926.35 € 60 to 3.5 mm 500 mm 700 mm 190 mm 1 - 100 mm 65 1/min 4 70 mm 45 mm 260 mm 340 mm 5.5 kW 1250 mm 1350 mm 2400 mm 3500 kg Cjdpfx Aiowwwtielegw Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Automatic central lubrication Equipment in accordance with CE regulations OPTIONS: vibrations pads bolster plate

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 64000 € 1209.6 € 80 to 900 mm 540 mm 180 mm 4 - 102 mm 54 1/min 490x325 mm 280 mm 380 mm 7.5 kW 2010 mm 1390 mm 2750 mm 5400 kg 8-fold ram guide front protection by light guard manual stroke adjustment ram adjustment witch ratchet drive over gear combined clutch brake unit with pneumatic control fix table single and continuous stroke foot pedal and 2 hand control mech. overload safety device automatic central lubrication user manual in GERMAN and ENGLISH according to CE rules Cedeynnbdopfx Ailogw

Condition: used, Year of construction: 1998, Beutler P96-C630 - Eccentric Press - Mobile control panel - Infinitely variable drive - Clutch/brake combination - Overload protection in the ram - Light barrier Csdpoyna N Tsfx Ailsgw - Gooseneck lamp - Year of manufacture: 1998 Technical Data - Force: 630 kN - Stroke: 12 - 120 mm - Strokes per minute: 30 - 130 - Max. run-on time: 96 ms - Throat depth: 300 mm - Distance table/ram: 495 mm - Gap between frame walls: 270 mm - Ram area: 450 x 360 mm - Ram adjustment: 120 mm - Table area: 800 x 560 mm - Table opening: Ø 100 mm - Working height: 880 mm - Min. safety distance: 192 mm - Drive power: 5.5 kW - Operating voltage: 3x 400 V / 50 Hz - Machine dimensions (W x H x D): 1800 x 2600 x 1600 mm - Control cabinet dimensions (W x H x D): 800 x 1700 x 450 mm - Weight: approx. 5500 kg

Condition: used, Single-column – Eccentric press EBU, Type 75 SKU Machine No. P 4598462, Year of manufacture 1962 Pressing force 75 tons Reach 300 mm Table area 800 x 620 mm Die opening 325 x 225 mm Slide area 470 x 180 mm Tool holder bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Slide adjustment 80 mm Maximum installation height approx. 420 mm Stroke rate 60 + 105 strokes/min Motor power 4 kW Power supply 380 Volts, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with shear plate in the slide Cedpfx Aisdzqltolsgw - Tool monitoring system UNIDOR, Type APS MINI - Mechanically driven strip feed with strip straightener OSTERKAMP, Type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds through 2 V-belt stages on the gear pre-stage - Two-hand operation - Simple work area guard that can be swung open - Table height adjustment in the lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring located beside the machine - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons Good condition

Condition: used, Single-column eccentric press MÜLLER GEFREES Type 60 SV DK (identical to ExP60) Very little used eccentric press in original condition Machine no. 5250686 Year of manufacture 1986, like new condition Pressing force 60 tons Stroke 280 mm Table area 740 x 560 mm Ram area 385 x 200 mm Die opening in the table 300 x 200 mm Table area, table insert plate 740 x 560 mm Die opening in table insert plate Ø 103 mm Thickness of table insert plate 70 mm Dowel hole 40 mm Table height above floor 815 mm (with table insert plate) Installation height max. 275 (with table insert plate) Installation height max. 345 (without table insert plate) Stroke adjustment 10-90 mm Ram adjustment 60 mm Stroke rate 100 strokes/min Motor power 3 kW Drive power 380 Volt, 50 Hz - mechanical eccentric coupling with pneumatic control - spring-loaded brake controlled via cam - stroke release via pneumatic foot switch Codoi A A Tbepfx Ailsgw - overload protection with shear plate in the ram - table height adjustment via 2 threaded spindles - manual central lubrication system BEKA - operating manual and pneumatic diagram available Space requirement L x W x H 1400 x 1100 x 2200 mm Weight 3.4 tons very good condition, like new

Condition: good (used), Year of construction: 1960, machine/vehicle number: P4461960, Offer 25471 Technical Data: - Pressing force: 75 t - Throat depth approx.: 300 mm - Table size approx.: 800 x 600 mm Csdpjxxwc Rsfx Ailsgw - Height-adjustable table - Stroke adjustment approx.: 16 - 140 mm - Ram adjustment: 80 mm - Strokes per minute: 80 - Pneumatic connection - Drive: 400 V - Space required approx.: W 1800 x H 2450 x D 2000 mm - Weight approx.: 4000 kg

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 65/2/158/02, functionality: fully functional, pressing force: 65 t, stroke length: 120 mm, table length: 580 mm, throat depth: 280 mm, total width: 820 mm, punching force: 65 t, Used 65ton mechanical power press for sale Video at the bottom of this listing MODEL 65 CNR 4 SERIAL N° 65/2/158/02 NOMINAL FORCE (Max stroke) 650 [ KN] Cedjxqn Unjpfx Ailogw MACHINE WEIGHT 5000 [ daN] NOMINAL SPEED 73 [ C/min ] VARIABLE SPEED MIN/MAX [ C/min ] MAXIMUM CLUTCH ENGAGEMENTS 36 [ C/min ] CLUTCH PRESSURE MIN/MAX 4 / 5,5 [ bar) MAXIMUM STOPPING TIME 0,154 SAFETY DISTANCE 246 [ mm ] FLYWHEEL ENERGY 3440 [ KJ] STROKE LENGTH MIN/MAX 10 / 120 [ mm ] RAM ADJUSTMENT 100 [ mm ] SHUT HEIGHT S.D.A.U. 320 [ mm ] MAXIMUM EJECTOR STROKE 40 [ mm] TABLE SIZE 68 / 580 / 820 [ mm ] RAM SIZE 340/ 470 [mm] TOOL SPIGOT DIA 45 [ mm ] THROAT DEPTH 280 [ mm ] MAX TOOL SIZE 340 / 470 [ mm ] MAX TOP TOOL WEIGHT 136 [ daN]

Condition: used, Year of construction: 1974, functionality: fully functional, pressing force: 63 t, stroke length: 100 mm, ram adjustment: 63 mm, We offer this used Weingarten A 63 eccentric press, year of manufacture 1974, including punching tool. Pressing force: 63 t Strokes per minute: 120 Ram stroke: 8–100 mm Ram adjustment: 63 mm Cgsdpfx Aioyryt Teljw If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: TYPE 63 R4, functionality: fully functional, operating hours: 100 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 63 t, overall weight: 4,600 kg, Equipment: documentation/manual, EECCENTRIC PRESS OMERA Model: 63 R4 Basic Technical Data Nominal force: 630 kN Motor power: 5.5 kW Strokes per minute: 45–104 Slide stroke: 9–120 mm Clearance between table and ram: 310 mm Table dimensions: 750 × 570 mm Ram dimensions: 500 × 350 mm Table thickness: 65 mm Table opening: 165 mm Machine weight (approx.): 4,600 kg Machine dimensions (for transport): 2806 × 1244 × 1492 mm Power supply: 380 V / 50 Hz / 3 Ph Machine color: RAL 7035 (light grey) / moving parts RAL 5017 (blue) Codpfoyn Sdpjx Ailsgw Machine Equipment Centralized lubrication system PLC: SCHNEIDER with control panel Inverter for adjustable press speed Pneumatic clutch Balancing cylinders Hydraulic overload protection system VPN connection for remote access Additional Equipment Additional work plate 750 × 570 × 65 mm (1 pc) Vibration dampers (1 set) Work area lighting (1 set) Tool protection and press operation monitoring system Machine Details Serial number: CM18355 Year of manufacture: 2022 Operating hours: approx. 100 Condition: Machine used only for demonstration and tool testing Documentation Complete documentation in Croatian language (printed and digital) Electrical and hydraulic diagrams CE Declaration of Conformity Disassembly, preparation, and loading for transport: approx. 1,500 EUR

Condition: used, pressure 80 t throat 320 mm stroke 8 - 112 mm table surface area 830 x 600 mm no. of strokes 30 - 85 Hub/min ram surface 650 x 400 mm ram adjustment 71 mm clamping plate 990 x 550 mm Cjdpfxotqm Dmo Ailegw table height over floor 810 mm table height over floor 800 mm column daylight (vorn) 680 mm column daylight (hinten) 520 mm total power requirement 7,5 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table Machine was/is partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled - New seals and hydraulic hoses - new main engine - the two main bearing bushes, the bushing of the 3rd bearing and the connecting rod bushing are new - Shaft machined and booked out - Painting - new control cabinet with PLC and touchscreen including cabling. - Current UVV test with braking time measurement

Condition: used, Year of construction: 1990, - incl. tools & accessories - Year of construction 1990 Technical data: - Capacity: 60 t - Stroke rate: 52 /min - ram adjustment: 80 mm - Table dimensions: 750 x 480 mm - ram surface: 360 x 250 mm - Table recess: Ø 170 mm - Projection: 250 mm - Motor speed: 1400 rpm Cgodpfx Aijrz R Eqolew - Motor power: 4 kW - Operating voltage: 400 V - Machine dimensions WxHxD: 950 x 2500 x 1900 mm - Control cabinet dimensions WxHxD: 60 x 115 x 35 mm - Weight: approx. 4000 kg

Condition: used, Year of construction: 1970, ja weight of the machine ca. 9,5 t serial number 10457/2 160000 KG stroke of worktool slide 41 Hub/min Cgedpfx Aijvvx Exjljw +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Used Amada 60ton C frame press for sale SPECIFICATION MODEL TP -60 CAPACITY 60 ton NUMBER OF SLIDE STROKES 50 Hz 45-80 strokes/ minute STROKE LENGTH 120 mm SLIDE ADJUSTMENT 70 mm SLIDE AREA (R-L x F-B) 500 x 400 mm BOLSTER AREA & THICKNESS (R-L x F-B x thickness) 900 x 550 x 80 mm SHUTHEIGHT 370 mm MAIN MOTOR 5.5 x 4 kWXP AIR PRESSURE REQUIRMENT 5.0 kgf/cm2 MAXIMUM NUMBER OF FLYWHEEL ROTATIONS 1170 r.p.m. MINIMUM AIR PRESSURE FOR CLUTCH ON STOPPING TIME 165 msec BRAKE MONITOR SETTING, DEGREES BEYOND T.D.C. 15 degree SERIAL NO. 07312665 MANUFACTURE DATE 1992.4 Cgjdeyk D Dtjpfx Ailow MANUFACTURED BY AMADA CO., LTD.

Condition: excellent (used), machine/vehicle number: 4868, functionality: fully functional, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight with motor, without base: 245-295 kg Net weight of standard pedestal (base): 95 kg Customs classification: 8462.9930 Cedpfow T S Tzjx Ailsgw TECHNICAL SPECIFICATIONS TYPE D-8 / D8-200: Maximum capacity: 8 tons Maximum cutting section for Rc=40 kg/mm²: 200 mm² Standard fixed stroke: 20 mm Variable stroke, standard range: 4-36 mm Variable stroke, extra-large range: 8-50 mm Maximum height between table (without plate) and ram: 220 mm Thickness of movable plate: 42 mm Standard opening in the plate, diameter: 50 mm Opening in the table, diameter: 60 mm Ram bore, diameter x depth: 38x60 mm Ram adjustment (tie rod extension): 70 mm Ram base surface (width x depth): 105x90 mm Required power, HP: 1/3 Flywheel dimensions, diameter x width: 410x85 mm Standard flywheel speed: 180 RPM TECHNICAL SPECIFICATIONS TYPE D-8: Distance from ram center to frame: 100 mm Distance between frame columns: 170 mm Table surface, width x depth: 270x190 mm TECHNICAL SPECIFICATIONS TYPE D8-200: Distance from ram center to frame: 200 mm Distance between frame columns: 160 mm Table surface, width x depth: 270x300 mm Unless otherwise stated, these technical specifications are provided without engagement and subject to possible error or omission.