Used machining centers (vertical) X-axis travel 700-799mm for sale (198)

Condition: used, AXA VHC-2-M E vertical / horizontal machining centre Dodpjztkzpjfx Akvskr Travels 2.360 x 500 x 630 mm at 25 m/min rapid traverse, with an SK 40 DIN 69871 A spindle running 60–6.000 rpm driven by a water-cooled Kessler DME 112 AL hollow-shaft motor rated 27 kW. Controlled by a HEIDENHAIN TNC 430 PA. The swivel head indexes from -90° to +90° in 2,5° steps, so the machine works both vertically and horizontally. Side-mounted tool changer for 22 tool pockets, hinged-belt chip conveyor with left-hand discharge.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, feed length X-axis: 762 mm, feed length Y-axis: 406 mm, feed length Z-axis: 508 mm, controller model: NGC, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Haas high-performance Super-Speed vertical machining centers deliver the high spindle speeds, fast rapid traverses, and quick tool changes required for high-volume production and reduced cycle times. Each SS machine features a 12,000-rpm, inline direct-drive spindle, an ultra-fast side-mount tool changer, and high-speed rapid traverses on all axes. The VF-2SS is our most popular Super-Speed model. Djdpfxozr U Ukj Akvekr High-speed spindle Fast rapid traverses Super-speed side-mount tool changer

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC 530 HSCI mit SmartNC, table width: 500 mm, table length: 900 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, For sale is a very well-maintained vertical CNC machining center, Quaser MV 154 P, manufactured in 05/2015, with initial commissioning in 09/2016. The machine is in very good technical condition and fully functional. A particular advantage is the recently renewed main spindle, which has only approximately 10 operating hours – the spindle is practically as new. An inspection while the machine is powered on is possible by prior arrangement. TECHNICAL DATA Control: - Heidenhain iTNC 530 HSCI with SmartNC Travel distances: - X-axis: 760 mm - Y-axis: 530 mm - Z-axis: 560 mm - Rapid traverse: 40 m/min Main spindle: - Maximum speed: 12,000 rpm - Maximum power: 25 kW Tool magazine and work table: - Tool magazine: 30 positions - Table size: 900 × 500 mm EQUIPMENT - Chip conveyor - Inclined bed filter system - Zero-point clamping system - 4th axis Rotamatik 120 - Blum measuring probe RENEWED COMPONENTS - Main spindle renewed, operating time only approx. 10 hours - Motor newly re-bearinged - Ball screw of the X-axis renewed - Däublin unit renewed The machine can be inspected and demonstrated at our location in 78132 Hornberg by arrangement. For questions, further technical information, or to arrange an inspection, Arnd Sauter GmbH is always at your service. Dodsibat Ijpfx Akvokr Price: 55,000 EUR net, ex works. Subject to prior sale and errors.

Condition: used, Year of construction: 2015, travel -x axis 762 mm travel -y axis 530 mm travel -z axis 560 mm control Siemens Sinumerik 828D max. Spindle speed 10.000 U/min. table-size 900 x 500 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | QUASER - MV 154 C-10B equipped with 30-way tool changer and chip conveyor. The machine is in a well-maintained condition. Dodpozq Hkbjfx Akvokr Please note that the technical details were added from comparable machines. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MV-154 | MV154 | MV 154 C 10B | MV154C

Condition: used, Year of construction: 2021, travel -x axis 712 mm travel -y axis 508 mm travel -z axis 515 mm B-axis ° C-axis 360 ° control Siemens Sinumerik 828D max. Spindle speed 12.000 U/min. rotary table dia. 410 mm max. swing diameter 500 mm max. table load 200 kg tool taper BT40 5-axis machining center | QUASER - UX 500 equipped with ITC, tool changer and chip conveyor. Dsdozq Hi Repfx Akvokr The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: UX-500 | UX500

Condition: used, Year of construction: 2013, travel -x axis 762 mm travel -y axis 530 mm travel -z axis 560 mm control Siemens Sinumerik 828D max. Spindle speed 10.000 U/min. table-size 900 x 500 mm Dkodpozq Hi Dofx Akvsr numbers of positions in the tool changer 30 Milling machining centers - vertical | QUASER - MV 154 C-10B equipped with 30-way tool changer and chip conveyor. The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MV-154 | MV154 | MV 154 C 10B | MV154C

Condition: ready for operation (used), Year of construction: 2015, Manufacturer: WEMAS GmbH Type: BZ 500 Year of manufacture: 2015 Control system: FANUC Series 0i-MD Connected load: 22 kVA Operating voltage: 400 V Weight: approx. 8,280 kg Equipment: Pallet changer The machine was primarily used for aluminum processing and is very well suited for this purpose. Dkjdpezi Hdlsfx Akver According to our current knowledge, the machine is generally in operating condition. There is currently a malfunction in the pallet changer, which is likely due to a defective sensor. Therefore, the pallet changer is currently not reliably usable. According to our current knowledge, all other machine functions are operational. The machine is currently powered on and can be inspected after prior appointment.

Condition: excellent (used), Year of construction: 2018, operating hours: 2,240 h, Hurco VMX30i vertical machining center Year: 2018 Power on hours: 8220 Spindle hours only: 2240 Technical details: X-Axis Movement 760 mm Y-Axis Movement 510 mm Z-Axis Movement 610 mm Table size 1020x510 mm Table load 1000 kg Spindle nose SK40 Spindle speed up to 12000 rpm Tool magazine 30 positions Max weight 7 kg Max tool diameter 80 mm Max tool length 300 mm Rapid traverse rate in X/Y/Z : 35/35/30 m/min Weight 4800 kgs Accessories/options: - Through spindle coolant - Chip conveyor - Cooling System - Spindle Cooling Dkodpfxozqzwpo Akvjr Under power in our warehouse. Clamping units, vices, are not the scope of the delivery.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 1131578, SPECIFICATION Trunnion table size 630mm x 500mm X axis traverse 762mm Y axis traverse 508mm Z axis traverse 508mm B axis tilt +110 deg -35 deg C axis rotation 360 degree Dedpfjzr Nf Dex Akvskr Spindle BT 40 Spindle speeds 0-15,000rpm Spindle motor 22.4kW Rapid feed rate X, Y, Z axis 30.5/min Rapid feed rate B, C axis 150 degrees a second Toolchanger capacity 40 + 1 Tools Approx. weight 8900kg   MACHINE EQUIPPED WITH: - Haas CNC Control System Through Spindle Coolant, with Auxiliary Filtration Swarf Conveyor Renishaw Wireless Intuitive Probing System High Speed Machining Lighting Enclosed Guarding

Condition: used, Year of construction: 2007, x-travel 760 mm y-travel 510 mm z-travel 610 mm table surface area 1.020 x 510 mm control WINMAX spindle turning speed range 12.000 U/min spindle drive 13,5 kW 24 St. tool adaptor SK 40 | | internal coolant system feed 20 bar rapid traverse 35/35/30 m/min weight of the machine ca. 5,0 t Djdpfx Ajznnc Tjkvekr used vertical machinig centre with 4th axis - 4th axis - Dual toolchanger - internal coolant with filter - spindle oil cooling - electric hand wheel

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1162068, SPECIFICATION Table size 1370mm x 620mm X axis traverse 1016mm Dedpfxszr H Tlj Akvokr Y axis traverse 660mm Z axis traverse 635mm Spindle nose to table 102 – 737mm Spindle BT40 Spindle speeds 0-12,000rpm Spindle motor 22.4kW Rapid feed rate 18m/min Toolchanger capacity 30+ 1 tools Approximate weight 7750Kg MACHINE EQUIPPED WITH: - Haas CNC Control Swarf auger High speed machining Co-ordinate rotation and scaling Rigid tapping 5 off BT40 toolholders Filtermist extraction system Programmable coolant nozzle Lighting Guarding

Condition: used, Year of construction: 2008, Control OKUMA OSP-P200M. Cooling threw spindle. Rotating axe A Tsudakoma 250. Chip conveyor RENISHAW OMP40 Tool probe Velikost upínací plochy 1000 x 460 mm Rozsah pojezdů os: Axe X 762 mm Axe Y 460 mm Axe Z 460 mm Spindle revolutions 50 - 8000 rpm Dkodpfxjzqtbge Akvor DIN 40 Number of tool positions 48 Machine dimensions 2805 x 2160 x 2746 mm Machine weight 7100 kg

Condition: excellent (used), Year of construction: 2020, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: 1172799, spindle speed (min.): 15,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Haas UMC-750 5 Axis Vertical Machining Centre with Haas CNC Control, 630mm x 500mm Table, Travels X Axis 762mm, Y Axis 508mm, Z Axis 508mm, Through spindle coolant, C Axis 360deg Rotation, B Axis -35deg to + 100deg, Dkodpex Uznfjfx Akvsr High speed machining enabled Spindle Speed 12,000rpm, 40 Tool ATC 2020 machine , BT40 Spindle Taper, Swarf Conveyor, Coolant System. S/No. 1172799 Wireless probing.

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, number of axes: 5, This DMG DECKEL MAHO DMC 60T was manufactured in 2005. A Universal machining centre, it offers robust construction and reliable performance for precision machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60T Universal machining centre. Contact us for more information. Dkodpfox Hbmfjx Akver Machine Benefits Technical Machine Benefits • Machine with nc rotary table and tool magazine for 60 tools: approximately 9610 kg • Belt filter system 900 l: approximately 850 kg • Installation weight of machine with max weight for workpiece, tools, and operating materials, belt filter system: maximum 11500 kg • B-axis complelty overhauled Extra Information Machine still under power // Contril unit: Heidenhain: MILL PLUS 2-fold pallet change. IKZ spindle with 12000 rpm, 40 bar Operating mode 4 for working with open door. Blum laser, with tool measurement and tool breakage control. Preparation for Blum 3D probe. Probe is not included in the scope of delivery. 900 liter cooling water tank with belt filter

Condition: used, Year of construction: 2007, Haas VM-2 CNC Vertical Machining Center (2007) With 24-Tool ATC and chip auger Dkedpfx Akszpattovjr Offerors are required to download the seller required document from the link below. For sales within Israel, offerors should complete section 1 only. For export sales, offerors should complete and return sections 1 and 2. Please note the Removal Instructions in listing, which form part of the terms of sale.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 10,000 rpm, Equipment: documentation/manual, Rigid tapping, rotation and scaling, Quick Code, spindle orientation (M19), high-speed machining, intuitive programming and advanced tool management, programmable spray nozzle, coolant system, lateral tool changer (24+1 positions), chip removal system with auger, Renishaw measuring system, drive and wiring for a Haas 4th axis, 5-axis capability (with tilting/rotary table). Dkedozq Ab Aepfx Akvor

Condition: good (used), Year of construction: 1997, machine/vehicle number: 570035, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, total height: 3,300 mm, total length: 4,600 mm, total width: 5,500 mm, overall weight: 6,000 kg, table length: 700 mm, table width: 500 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle motor power: 25,000 W, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle speed (max.): 12,000 rpm, spindle speed (min.): 20 rpm, Equipment: documentation/manual, 5-axis machining center, manufacturer: DECKEL MAHO, type: DMU 70 V, year of manufacture: 1996, serial no.: 570035, travel X/Y/Z): 710/520/520 mm, HEIDENHAIN control, max. spindle speed 12,000 rpm, 60-fold tool changer, compact filter system INTERLIT SUK200/900, year of manufacture: 1997, filling volume 900 l, filter surface 0.2 m³, chip conveyor, internal coolant supply Dkedpfx Akorkz A Iovjr Comment: 1 tool changer defective

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 35,000 rpm, number of axes: 5, This 5s FEHLMANN PICOMAX 90-HSC + Erowa automation was manufactured in 2005. It features a table size of 1260x490 mm, with an impressive spindle speed of up to 36,000 rpm and a control system by Heidenhain TNC 530. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 90-HSC + Erowa automation we have for sale. Contact us for further details. • Table size: 1260x490 mm Dksdpfjyizugox Akvor Additional equipment • incl. EROWA Robot Multi automation • Item 20 (Article No. 3391-176): 1 Pc. Continuous Path Control Heidenhain iTNC 530M (Standard Base Version) Item 30 (Article No. 3360-181): 1 Pc. Software Option 1 for iTNC 530M (Rotary table machining in mm/min, programming of contours on the cylinder surface, tilting of the working plane, including circular interpolation in 3 axes) Item 40 (Article No. 3360-182): 1 Pc. Software Option 2 for iTNC 530M (3D machining: smooth movement, 3D tool compensation, TCPM, 5-axis linear interpolation, splines, block processing time 0.5 ms) Item 50 (Article No. 3391-211): 1 Pc. Standard Clamping System Item 60 (Article No. 3390-220): 1 Pc. Machine Table 1260x490 with 9 T-slots 12H8, 50 mm distance Item 70 (Article No. 3391-240): 1 Pc. Tool Changing System with 28 magazine slots HSK-E50 Item 80 (Article No. 3390-270): 1 Pc. Side Enclosure of the machining area made of stainless sheet metal, with wide-opening sliding doors at the front and polycarbonate panes. Incl. 2 anti-stroboscopic lights. Right side door manual or optional automatic opening. Item 90 (Article No. 3390-272): 1 Pc. Right Side Door with window, lockable Item 100 (Article No. 3390-275): 1 Pc. Automatic Enclosure Door left to P90 for workpiece loading. Incl. 2 pneumatic cylinders, guides, control valve and control circuit for CNC control. Item 110 (Article No. 3390-288): 1 Pc. Full Enclosure of the machining area towards top (32/28 tools), with lockable recess for loading crane. Item 120 (Article No. 3360-506): 1 Pc. Extended Energy Saving Function via electronic timer. Automatic standby switching of machine drives after completion of NC programs and restart of the plant. Item 130 (Article No. 3360-842): 1 Pc. Oil Mist Extraction System for machining area Item 140 (Article No. 3390-851): 1 Pc. Standard Coolant System 3 bar / 30 l/min with 2 submersible pumps, chip drawer, additional fine chip filter insert and stretch mesh filter. Coolant tank 240 l capacity. Item 150 (Article No. 5130-101 Special): 1 Pc. Preparation for Minimal Quantity Lubrication system. Hoses routed through machine head to spindle. Switchable via M-functions. Item 160 (Article No. 3363-872): 1 Pc. 3D Touch Probe System Renishaw MP 40 incl. spindle insert HSK E50, touch stylus Ø 6 mm, signal transmission wireless via infrared system. Self-calibrating with 360° radiation. Item 170 (Article No. 3390-877): 1 Pc. Laser System NT for high-precision measurement and monitoring of tools D 0.15 to 63 mm. Cycle-supported measurement of diameter and length as well as contour stability. Includes automatic alignment and checking of CNC tool table. Item 180 (Article No. 3360-918): 1 Pc. FEHLMANN HSC Settings (Cycle 327) for dynamic optimization of digital axis drives. Item 190 (Article No. 4875-114): 1 Pc. Automatic CNC Indexing and Swiveling Unit ATS 160 CNC-SDKD--ITSPC in digital execution with Erowa quick-clamp chuck ITS Power Chuck. Center height: 160 mm. Swivel range: +18° to -5°. Max. workpiece diameter: 300 mm. Max. workpiece weight: 50 kg.

Condition: excellent (used), Year of construction: 2015, operating hours: 3,900 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,900 h, We offer in very good condition Hurco VMX30 HSi with HSK-A63 spindle and 18k RPM. X-Axis travel: 762mm Y-Axis travel: 508mm Z-Axis travel: 610mm The machine has following options: Internal coolant 20 bar 40 Tool changer 18 k RPM Spindle hSK-A63 Linear Scales Touchprobe Renishaw OMP40 Dodpfx Akjx N E H Ujvskr Toolprobe Renishaw TS27R Ultimotion software Tool change optimization software Please not vices are not with sale of machine

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,339 h, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC530, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DMG DECKEL MAHO DMU 60 monoBlock was manufactured in 2005. It features a chip conveyor and a coolant system, ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 60 monoBlock machine we have for sale. Contact us for more information. • Heidenhain TNC530 • 24 tool positions • SK-40 chuck • Spindle speed: 18,000 • measuring probe Technical Specification Dedpjx D Nwkjfx Akvskr Through-spindle Coolant Yes Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2010, operating hours: 36,604 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, overall weight: 9,500 kg, number of axes: 4, This 4-axis AXA DBZ vertical machining centre was manufactured in 2010. It features an impressive X-axis travel of 2 x 750 mm for pendulum processing, Y-axis travel of 500 mm, and Z-axis travel of 600 mm. The machine includes a NC rotary table with hydraulic counter bearing and a plate-type tool changer. If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details. • Spindle hours: 36,604 h (verified via image) • Machine ON hours: 81,189 h • Overall dimensions: 4500 × 2250 × 2700 mm • Voltage: 400 V • Frequency: 50 Hz • Total power requirement: 45 kVA • Full load current: 65 A • External fuse: 80 A • Tool changer: Plate-type tool changer • Design/configuration: Traveling column; Left/Right work areas (pendulum machining) • Safety/enclosure: Maintenance door Additional equipment • NC rotary table RTA 200 with hydraulic counter bearing (4th axis) • Clamping system: Hydraulics for right/left work areas, incl. rotary union for 4th axis Dodpfx Akjy Edv Hjvjkr • Internal coolant supply (IKZ) • Chip conveyor • Emulsion (coolant) system • Recooling unit (chiller)

Condition: excellent (used), Year of construction: 2019, operating hours: 5,277 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 630 mm, overall weight: 8,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,400 W, spindle nose: CT 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CNC Machining Centre HAAS UMC 750 SS TECHNICAL CHARACTERISTICS: Year of manufacturing: 2019 Number of simultaneous axes: 5 Stroke X axis: 762 [mm] Stroke Y axis: 508 [mm] Stroke Z axis: 508 [mm] Angular C axis stroke: 360 [°] Table dimensions : Ø630 x 500 [mm] Max. load on table: 300 [Kg] B axis swivelling stroke: +110 [°] / 350 [°] Spindle type: CT 40 Max. spindle speed: 15000 [rpm] Spindle power: 22.4 [kW] Tool changer magazin number of stations: 40 Lubrication tank capacity: 284 [l] Number of running hours: 5277 [h] Weight: 8500 [Kg] EQUIPMENT INCLUDED: x1 spindle 15000 [rpm] x1 through-spindle coolant x1 high-pressure coolant pump 21 bar x1 auxiliary coolant filter x1 RENISHAW wireless workpiece probe x1 calibration sphere x1 RENISHAW tool probe x1 HAAS oil mist extractor x1 HAAS remote handwheel x1 HENNIG chip conveyor, type 101435 Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling, drilling and tapping machines, and CNC grinding machines Dsdpfx Aksx Nf Tbevskr

Condition: ready for operation (used), Year of construction: 2017, operating hours: 6,929 h, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5s POSmill H 500 U was manufactured in 2017. It features a Heidenhain TNC 530 control, a 60-station tool magazine, and a KESSLER rotary table with a diameter of 500 mm. The machine includes advanced systems such as automatic coolant level monitoring and a BLUM laser tool measuring system. Consider the opportunity to buy this POSmill H 500 U vertical machining centre. Contact us for further details. • Tool magazine: 60-station, HSK-A63 • Rotary table: KESSLER rotary table, Ø 500 mm • Spindle air blast: Air through the spindle • Internal coolant supply: 20 bar, with belt filter unit • Coolant system: Automatic coolant level monitoring • Media supply: 3-channel media supply at table center Dkodpfsyir Dxsx Akvsr • Handwheel: Mobile electronic handwheel • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D touch probe); workpiece measuring preparation included • Viewing: Rotation viewing window included • Collision monitoring: POS DCM collision monitoring module • Condition: Top condition • Hours: 6,929 • Accessories note: Without tool holders and without quick clamping system Additional equipment • Oil mist separator: Electromechanical • Hydraulic unit: Hydraulic aggregate, M-function controlled Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Technical Data Dkjdex Iikbspfx Akvor - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control: - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit - Interfaces: RS 232C / V24 - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Machine Construction: - High rigidity, suitable for roughing operations Tool Changer: - Double-arm changer with 24 stations Equipment: - Cooling unit for milling spindle - Rinsing system for chip removal - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar - Chip conveyor Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Condition: good (used), Year of construction: 2014, functionality: fully functional, The machine is in good technical condition, and an inspection while running can be arranged. Includes a 4th axis. Work area and table: Table dimensions: 914 × 356 mm Travel in the X-axis: 762 mm Travel in the Y-axis: 406 mm Travel in the Z-axis: 508 mm Distance from the spindle nose to the table: 102 to 610 mm Maximum table load: 680 kg Spindle (Super Speed specification) Spindle taper: ISO 40 (Inline Direct-Drive) Maximum spindle speed: 12,000 rpm Spindle motor power: 22.4 kW (30 HP) Torque: 122 Nm at 2000 rpm Tool changer (ATC) Changer type: Rapid side-mount tool changer Changer capacity: 24+1 positions (optionally 30+1) Tool change time (tool-to-tool): approx. 1.8 seconds Dksdpfx Akeznx Nwovsr Feeds and drives Rapid traverse rates in X, Y, and Z axes: 35.6 m/min (compared to 25.4 m/min for the standard VF-2 version) Maximum working feed rate: 21.2 m/min Guide type: Linear ball bearings in all axes Dimensions and weight Machine footprint (W × D × H): approx. 2.51 × 2.36 × 2.57 m (height depends on the Z-axis elevation) Machine weight: approximately 3,540 kg