Used machining centers (vertical) X-axis travel 400-599mm for sale (234)

Condition: excellent (used), Year of construction: 1998, HIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a major factory overhaul by CHIRON For sale: a vertical CNC machining center, CHIRON FZ 18 S MAGNUM High Speed, manufactured in 1998. The machine is equipped with a Siemens SINUMERIK control system, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also features an oil mist extraction system with a filter, plus air conditioning for the control system. The most important advantage of the offered machine is the major inspection and overhaul carried out by CHIRON in 2020. As part of the work, key machine components were replaced, including: spindle, control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available, confirming the scope of the overhaul. Technical specifications: Manufacturer: CHIRON Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Control system: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the major overhaul performed by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Tsdpfx Aozdklpjpdjd Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Condition: like new (used), Year of construction: 2022, operating hours: 3,955 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 13 kVA, torque: 83 Nm, controller manufacturer: SIMENS 828D OP, workpiece weight (max.): 600 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 3,955 h, number of spindles: 1, number of slots in tool magazine: 24, We are selling a very well preserved DMG MORI M1 CNC milling center, year 2022, with only 3111 hours of operation. The machine is in excellent condition and can be tested before purchase. Technical details: X-Travel 550 mm Tjdpewl N Tqefx Apdod Y-Travel 550 mm Z-Travel 510 mm table-size 790 x 560 mm spindle taper ISO SK 40 turning speed range 12000 1/min Feeds longditudinal/cross/vertical 1 - 30000 mm/min Rapid Motion -Longitudinal/Cross/Vertical 30 m/min No. of tools in magazine 20 Workpiece diameter at full load 80 mm Workpiece diameter with 2 vacant positions 140 mm Workpiece length 300 mm Weight of tools max. 7 kg Table load 600 kg spindle drive 9 / 11 kW control SIEMENS 828D total power requirement 30 kVA Additional information cnc SIEMENS 828 D Chip conveyer Cooling throug the spindle 20bar RENISHOW Measuring probe Tool taster

Condition: used, Year of construction: 2003, MAZAK NEXUS VCN 410A Year 2003 Travel in the X-axis: 560 mm Tedezpynkspfx Apdsd Travel in the Y-axis: 410 mm Travel in the Z-axis: 508 mm Table length: 900 mm, Table width: 410 mm Tool magazine: 30 Spindle taper: CAT 40 Max. spindle speed: 12000 rpm Spindle motor power: 11 kW Documentation included Coolant tank with pumps

Condition: not inspected (used), Year of construction: 1994, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 426 mm, overall weight: 6,500 kg, number of slots in tool magazine: 20, FZ18W magnum rotary indexing table, Fanuc OM control BT40 spindle, maximum spindle speed 8,000 RPM Todpfxezbal Ij Apdod 20-tool changer 2 tables Nikken dividing head

Condition: ready for operation (used), Year of construction: 2017, operating hours: 1,179 h, travel distance X-axis: 550 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 355 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 500 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, number of axes: 3, This 3-axis Exeron HSC 300/3 was manufactured in 2017. It features impressive travels of 550 x 340 x 355 mm and a clamping table size of 470 x 400 mm with a maximum load of 500 kg. The machine is equipped with a high-frequency spindle capable of speeds up to 42,000 rpm and a tool magazine with 40 positions. If you are looking to get high-quality machining capabilities, consider the Exeron HSC 300/3 vertical machining centre we have for sale. Contact us for further details. • Clamping table: 470 x 400 mm • Spindle speed: up to 42,000 rpm (StepTec high-frequency spindle) • Taper / tool interface: HSK 40-E • Usage: exclusively for machining graphite electrodes • Spindle time: 1,180 h Additional equipment • Workpiece probe: Heidenhain TS 460 + calibration mandrel • Tool measurement: integrated laser system MICRO COMPACT NT Tsdpe Ad Hbkefx Apdsd • Extraction system: Keller L-CUT-1-PM3-BE58 (graphite dust extraction) • Chip conveyor: No (machine equipped with graphite dust extraction instead)

Condition: used, Year of construction: 2009, functionality: fully functional, Vertical Machining Center Type No: TMV720A Working Area (L × W) 800 mm × 480 mm (31.5" × 18.9") Travels X Travel: 480 mm (12.2") Y Travel: 530 mm (20.8") Z Travel: MAX 630 mm (24.8") Distance Between Spindle Table Top: MIN 100 mm (3.9") Max Table Load 500 kg (1100 LBS) Table Height 900 mm (35.43") Rapid Traverse (X/Y/Z) 48 / 48 / 48 m/min Servo Motor X: 1.8 kW Y: 1.8 kW Z: 2.5 kW Spindle Spindle Nose: BT No.40 Spindle Speed: 8000 – 10000 RPM Spindle Motor: 5.5 / 7.5 kW Coolant Motor 0.55 kW (0.75 HP) Tool Selection Random Tool Capacity 24 (MAX) Max Tool Diameter 80 mm (3.14") Max Tool Dia × Length 250 mm (9.84") Max Tool Weight 7 kg Tool Holder BT40 Machine Height 2580 mm Net Weight 3800 kg Floor Space (L × W) Tjdpfsyuvivox Apded 2000 mm × 2380 mm Machine Precision Position: 0.01 mm / full travel Dependable Degree: ±0.005 mm

Condition: like new (used), Year of construction: 2023, Robodrill D21MIB5P/10K/2-W FANUC ROBODRILL D21MIB Plus Version with 2 option slots 24,000 rpm high-speed spindle X-axis travel: 500 mm Extended column +100 mm FANUC CNC control Series 31i-B High-speed CPU CE-compliant version Control panel with touchscreen including touch pen Enabling switch Machine interior with LED lighting Automatic oil lubrication Standard air blow function Telescopic cover for X-axis Z-axis protective cover Spindle head cover Machine enclosure for X500 version 32 A CEE connector Transformer for European version Tsdpo Adu Ilefx Apded Air distribution system English machine and safety labeling Documentation / operating and spare parts manuals, English CE basic package CE basic package PE connection kit 32-A CEE plug FANUC DDRIB rotary table Integration of a FANUC DDRIB rotary table Additional controlled axis Additional axis amplifier 80 A DDRIB connection / plug connection FANUC DDRIB rotary table, 1 unit Cable holder for X500/X700 Integration of the DDRIB including rotary feedthrough FANUC coolant system BASIC, left-hand side, without chip conveyor External cooling (AK) with 5.5 bar Flushing of the work area / chip flushing with 200 l/min Left-hand version Without chip conveyor 3-year-old machine that is completely new but has not been accepted by the end customer from Fanuc in the last 3 years.

Condition: good (used), Year of construction: 2014, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: P14ZYG488, Year 2014 with Fanuc series 31i Model B5 X/Y/Z: 500 x 400 x 330 mm 21-tool magazine with 4th axis TECHNICAL SPECIFICATIONS Table dimensions: 650 x 400 mm Maximum table load: 300 kg T-slots (3 slots, distance 125 mm): 14 mm X/Y/Z travels: 500 / 400 / 330 mm Table – spindle nose distance: 250 – 580 mm (with 100mm riser) Spindle axis – Z-axis guide distance: 380 mm Table height: 735 mm SPINDLE Spindle nose: 55 mm ISO 30 Spindle speed (standard): 100 to 10000 min-1 (opt. 24000 min-1) Acceleration time from 0 to 15000 min-1: 0.46 sec Time for reversal at 4000 min-1: 0.40 sec Maximum spindle torque (-1700 min-1): 78 Nm Continuous power: 3.7 kW (2800 – 8000 min-1) Power for 1 minute ED: 13 kW (1700-3500 min-1) Drilling capacity in steel: Ø 20 mm Milling capacity in steel: 70 cm3/min Tapping capacity in steel: M 12 Z-AXIS Ball bearing guide Cutting feed (AC servomotor 1.0 kW / Nm): 1 to 30000 mm/min Rapid traverse in X, Y, and Z: 54 m/min Rapid traverse: more than 1.5G TOOL MAGAZINE Tool type: ISO 30 according to DIN 69871A or BT30 Number of tools: 21 Tool change time: 0.8 sec. 2kg / 1.2 sec. 3 kg Chip-to-chip tool change time: 1.4 sec. Maximum tool diameter: 80 mm for maximum tool length 250mm Maximum tool weight: 2kg / 3kg at reduced speed Maximum weight of the 21 tools: 22 kg or 33 kg MACHINE TABLE / X-Y AXES Ball bearing guides New high-speed Fanuc alpha i motors Tedpfxszzxk Uo Apded AC servomotor 8i 2.5kW, 8Nm Rapid traverse in X and Y: 54 m/min on 30 mm Cutting feed: 1 – 30'000 mm/min Minimum input/output increment: 0.001 mm Positioning accuracy in X/Y/Z axis: ±0.002 mm FANUC 31i-B5 NUMERICAL CONTROL: 3 axes (option for 4th and 5th axis) Simultaneous linear interpolation up to 5 axes Work time per block: 15 sec. Memory capacity: 200 programs (512 KB) RS 232C and USB interface, Ethernet interface Flashrom card reader with editing functions Manual Guide i with assistance CONNECTION Voltage: (3 phases) 400V ±5% Frequency: 50Hz ±1 Hz Nominal power: 20 kVA Compressed air: 5 bar minimum, 0.13 m3/min Fuse: 34 A min The technical details provided are given without guarantee, subject to error or omission.

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 420 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, torque: 90 Nm, controller manufacturer: FANUC, controller model: series 31i-B5, rotational speed (max.): 24,000 rpm, tool length: 200 mm, tool diameter: 60 mm, tool weight: 4,000 g, input voltage: 400 V, type of input current: three-phase, number of tool turrets: 1, number of tool stations in tool turret 1: 12, number of driven tool stations in tool turret 1: 12, Equipment: chip conveyor, CNC Machining Center CHIRON FZ12 MT Tjdpfx Ajzqbdijpdjd TECHNICAL CHARACTERISTICS: Year of manufacturing: 2013 CNC control: FANUC series 31i-B5 Stroke X axis: 550 [mm] Stroke Y axis: 320 [mm] Stroke Z axis: 420 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] X/Y/Z axis acceleration: 10/12/15 [m/s] Max. bar diameter in turning spindle: 32 [mm] Main spindle max. speed: 8000 [rpm] Max. turning spindle torque: 90 [Nm] Max. counter spindle speed: 6500 [rpm] Counter spindle torque: 14.3 [Nm] Tool changer magazin number of stations: 24 Max. tool lenght: 200 [mm] Max. weight of single tool: 4 [Kg] Max. tool diameter: 60 [mm] Number of tool stations: 12 Number of tool stations driven: 12 Max. speed driven tools: 5000 [rpm] Milling head spindle attachment: HSK-A 50 Stroke B axis: -10 [°] / +100 Max. milling spindle speed: 24000 [rpm] Max. milling spindle power: 36 [kW] Max. milling spindle torque: 29 [Nm] Tool change time: 0.9 [sec] Chip to chip time: 2.4 [sec] Rated current: 125 [A] Total power required: 85 [kVA] Supply voltage: 400 [V] INCLUDED EQUIPMENT: 1 × High Speed Plus package 1 × LNS QUICK LOAD SERVO 80 S2 bar feeder 1 × KNOLL KF 150/500 paper band filtration unit 1 × 40 bar high-pressure coolant system 1 × Oil cooling unit 1 × KNOLL 600 K-1/200 chip conveyor 1 × RENISHAW workpiece probe 1 × RENISHAW TS27R tool setter 1 × ELBARON oil mist extraction unit Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas and Alzmetall, as well as CNC milling, drilling and tapping machines, and CNC grinding machines.

Condition: like new (used), Year of construction: 2016, operating hours: 1,900 h, functionality: fully functional, number of slots in tool magazine: 21, Equipment: chip conveyor, Fanuc vertical machining center Model: Robodrill α-D21LiB5 Tedpfx Aszz R Ekepdod Year: 2016 Table size: 850 x 410 mm X-axis travel: 700 mm Y-axis travel: 400 mm Z-axis travel: 330 mm Tool magazine capacity: 21 Control unit: Fanuc 31i model b5 Spindle speed (main spindle): 100-10000 rpm Spindle taper: BBT30 Spindle power: 11 kW High-pressure coolant system through the spindle: 15 bar Chip conveyor (belt type) Air blow through the spindle for dry machining 4-axis continuous table Maximum workpiece weight (spindle): 300 kg

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: P17XZG 044, Technical characteristics: # Machining workspace: X 500 mm; Y 400 mm; Z 330 mm # Axis description: 3 LINEAR AXES (X, Y, Z) + 1 rotary table axis A (indexing divider head) with direct angular measuring system, max. rotational speed 50 rpm, precision +/- 5 seconds # Axis A swivel range: +/-170˚ # Maximum clamping/workpiece dimensions: 650 x 400 mm; max. weight 300 kg # Rapid traverse speed (X/Y/Z): 54 m/min # Spindle speed: 100–10,000 rpm; spindle motor power: 11 kW # Spindle interface: BBT30 (with through-spindle coolant) # Automatic tool changer: 1x21 tools / chip-to-chip average time 1.5 sec # Maximum tool size: Ø40 mm / length max. 200 mm / 2 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 20 kVA / 22A Dimensions: # Installation space: approx. 1.65 x 3.2 (with chip conveyor) x 2.8 m Todpfx Asxxrb Ijpdsd # Weight: approx. 8,500 kg Equipment includes: # This 4-axis FANUC Robodrill α-D21LiB5 was manufactured in 2016. Ideally suited for precision machining, this vertical machining center delivers robust performance and high reliability. # CNC control: FANUC Series 31i-B5 # 4th axis and tailstock: FANUC DDR-TiB 178DU039 (2017/08) and TSUDAKOMA tailstock # Chip conveyor & high-pressure coolant filtration unit (max. 40 bar): Mosnic model 1641/2010 # Spindle cooling system, guideways and control cabinet cooling # Oil mist extraction/recovery system: Bristol model B 1000 EF # Fire suppression system: Kraft & Bauer # Part presence detection: with low-pressure air sensors # Automation: automatic side door and interface, automation-ready # In-process control: Renishaw TRS2 # Documentation: incomplete Machine status: WORKING

Condition: used, functionality: limited functionality, The following are offered: OPS 550 (3-axis): Tool changer with 32 positions for HSKE 40 Robot positions for the Erowa clamping system: 70 positions (workpiece changer) Robot positions for pallet changing: 8 positions Tjdpfjzzavrox Apdod The robot is currently not in operation due to a fault. However, this can be repaired so that it functions normally again.

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC370, overall weight: 3,600 kg, spindle nose: SK40, Equipment: documentation/manual, Bridgeport VMC1000-22 Tsdpfx Apsz Iugcsdsd Heidenhain TNC370 control X-Y-Z 1020-520-500 mm 6.000rpm SK40 22 Toolchanger Built 6-1996 Machine is under power

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, table load: 250 kg, overall weight: 2,800 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 5,500 W, number of slots in tool magazine: 16, tool weight: 3,000 g, number of axes: 3, This 3-axis Litz TV500 was manufactured in 2014. It features an X-axis travel of 500 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine includes a table size of 650 × 400 mm and a maximum table load of 250 kg. If you are looking to get high-quality machining capabilities, consider the Litz TV500 vertical machining centre we have for sale. Contact us for further details. • Table size: 650 × 400 mm Tedpfx Apo Abbacoded • Maximum tool diameter: 60–80 mm • Maximum tool length: 250 mm • Rapid traverse rate (X/Y/Z): 60 m/min • Power requirement: 15 kVA • Coolant tank capacity: 200 L Technical Specification Taper Size BT 30

Condition: good (used), Year of construction: 2007, Year of manufacture: 2007 Type: VCN 410 A II Machine number: 193994 Control system: Mazatrol MATRIX (dialog programming with graphical display) Operating hours: 15,500 h Table: 900 x 410 mm Table load capacity: 500 kg Travel distances x-y-z: 560 – 410 - 510 mm Distance spindle nose – table: 150 to 660 mm Spindle mount: SK 40 Tool changer: 30 positions Speed: 40 to 12,000 rpm, continuously programmable Spindle power: 18.5 kW Feed rate: up to 8 m/min, continuously programmable Tjdpfx Asz Rzrxspded Rapid traverse: 36 m/min Accessories: Renishaw tool measuring system, coolant system, USB interface, documentation Condition: good Connection: 33 kW Machine dimensions: 2,000 x 2,600 x 3,000 mm Weight: approx. 5 tons

Condition: used, Year of construction: 2006, functionality: fully functional, MATSUURA MAM72-35V 5 AXIS 32 PALLET MACHINING CENTER G-TECH 16i CONTROL Tjdpfx Aex U D Twepdsd 2006 MACHINE Supplied with 20 BT 40 tools and 5 pallets 15 k Spindle . £65k plus vat.

Condition: excellent (used), Year of construction: 2009, Technical Data Machining: 5 axes: 3+2 Travel distances X / Y / Z: 300 / (300 + 100) / 330 mm Spindle speed max.: 24,000 min-1 Control system: FANUC Series 31i-MODEL A5 Tool magazine: 21 positions Rapid traverse X / Y / Z: 54 m/min Table load, base machine: max. 200 kg, evenly distributed Tool length max.: 190 mm; Ø40 mm in the range of 120–190 mm Tool diameter at 150–12,000 min-1: 80 mm Tool diameter at 12,000–15,000 min-1: 60 mm Tool diameter at 15,000–20,000 min-1: 45 mm Tool diameter at 20,000–24,000 min-1: 40 mm Peiseler indexing head: AWUP, pneumatic clamping up to 6 bar Peiseler: Faceplate speed max.: 55 min-1 Peiseler: Tangential torque during circular milling max.: 250 Nm Peiseler: Transport load, faceplate vertical: 150 kg Peiseler: Tilting moment: 1200 Nm Peiseler: Tangential torque clamped (6 bar): 500 Nm Peiseler: Center bore: 50 H7 mm Peiseler: Faceplate runout: 0.01 mm Peiseler: Center bore runout: ±0.01 mm Peiseler: Positional accuracy from worm gear: ±15 arcseconds Connection, weight and dimensions Tool weight / total tool weight: 2 / 23 kg Machine weight: 2050 kg Electrical connection: 3 phases, 200/220 V, 50/60 Hz Connected power: 10 kVA Equipment and scope of delivery Peiseler AWUP swivel/indexing head for 3+2-axis machining Elbaron electrostatic filter, documentation RONA 60 SV Renishaw OMP40-2 measuring probe Blum measuring probe in the work area Extinguishing system according to the photos Tsdpfx Aps Aba Ifsded Technical specifications are subject to change without notice. Errors and prior sale reserved. The properties agreed upon in the purchase contract and the agreed scope of delivery shall apply.

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 406 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 381 mm, table width: 305 mm, table length: 914 mm, table load: 227 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 20, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS Mini Mill was manufactured in 2024. It features an X-axis travel of 406 mm, Y-axis travel of 356 mm, and Z-axis travel of 381 mm. The machine includes a robust table size of 914 x 305 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill vertical machining centre we have for sale. Contact us for further details. Tsdoz Nywkopfx Apdsd • Working Hours: 0 • Showroom Machine • Spindle Nose to Table (~ max): 19.0 in (483 mm) • Spindle Nose to Table (~ min): 4.0 in (102 mm) • Spindle Max Rating: 10.0 hp (7.5 kW) • Spindle Max Torque: 45.0 ft-lbf @ 500 rpm (61.0 Nm @ 500 rpm) • Spindle Drive System: Direct Speed, Belt Drive • Bearing Lubrication: Grease Packed • Cooling: Air Cooled • T-Slot Width: 0.626 in to 0.630 in (15.90 mm to 16.00 mm) • T-Slot Center Distance: 4.33 in (110 mm) • Number of Std T-Slots: 3 • Max Cutting Feedrate: 650 ipm (6.5 m/min) • Rapids on X / Y / Z: 800 ipm (20.3 m/min) • Axis Motors Max Thrust (X, Y, Z): 2000 lbf (8896 N) • Tool Changer Type: Carousel • Max Tool Diameter (full): 3.5 in (89 mm) • Max Tool Length (from gage line): 12.00 in (305 mm) • Tool-to-Tool (avg): 4.20 s • Chip-to-Chip (avg): 5.00 s • Coolant Capacity: 45 gal (170 L) • Air Required: 4 scfm @ 100 psi (113.0 L/min @ 6.9 bar) • Inline Air Hose: 3/8 in • Coupler (Air): 3/8 in • Air Pressure Min: 80 psi (5.5 bar) • Input AC Voltage (1 Phase): 220 VAC, Full Load Amps: 40 A • Input AC Voltage (3 Phase Low): 220 VAC, Full Load Amps: 25 A • Input AC Voltage (3 Phase High): 440 VAC, Full Load Amps: 13 A • Domestic / Export Pallet Dimensions: 90.0 in x 80.0 in x 92.0 in (229 cm x 203 cm x 234 cm) • Shipping Weight: 4450 lb (2018.5 kg) Additional equipment • Renishaw Wireless Intuitive Probing System (WIPS) with OTS table probe installed • Flexible coolant nozzle assembly Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30 h, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: SIEMENS, controller model: 840D SL, total height: 2,515 mm, total width: 1,700 mm, table width: 410 mm, table length: 770 mm, table load: 200 kg, overall weight: 3,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 16,000 W, number of slots in tool magazine: 24, product length (max.): 2,390 mm, number of axes: 3, This 3-axis SPINNER VC450 was manufactured in 2014. It features an X-axis travel of 450 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine includes a robust table size of 770 x 410 mm and a maximum table load of 200 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER VC450 vertical machining center we have for sale. Contact us for further details. • Control Unit Brand: Siemens • Control Unit Model: Siemens 840D SL • Spindle Power: 16 kW • Maximum Torque: 60 Nm • Rapid Traverse: 36 m/min • Tool Magazine Capacity: 24 Positions • Maximum Tool Diameter: 80 mm • Maximum Tool Length: 200 mm • High-Pressure Through-Spindle Coolant (CTS) • External Coolant Tank • Fully Enclosed Working Area • T-Slot Worktable • 3-Color Signal Tower • Machine Status: Tested and Fully Functional • Main Spindle Replaced by SPINNER in February 2026 • Operating Hours Since Spindle Replacement: approx. 30 h Additional Equipment • Chip Conveyor • Machine Vises (optional) • SK40 Tool Holders (optional) • Additional Tooling and Accessories (optional) Todpfxozt Nvle Apdjd Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, General: Spindle speed: 15,000 rpm Power: 7.3 kW Tool interface: HSK-A 40 Tool changer: 40 stations Control system: Siemens 840 DsL Working area Travel in X: 450 mm Travel in Y: 270 mm Travel in Z: 310 mm Rapid traverse (X/Y/Z): 75 m/min A-axis Swivel angle: +/- 120° System accuracy: +/- 5" Drive: Torque motor Spindle speed: 100 rpm Todpfx Aezf Admspded C-axis Diameter of rotary table: 198 mm System accuracy: +/- 5" Drive: Torque motor Spindle speed: 200 rpm Equipment Rotary union: 6-pole, integrated in A and C axes Chip conveyor: Drag chain, discharge height 490 mm, rear

Condition: excellent (used), Year of construction: 2010, Equipment: chip conveyor, documentation/manual, Brother TC-32BN QT Year 2010 Tsdpfsz S Iddsx Apdod Brother CNC control X-axis travel: 550 mm Y-axis travel: 400 mm Z-axis travel: 415 mm Rapid traverse: 70 meters per minute Spindle speed: 12,000 rpm Number of tools: 26 Tool holder: HSK 40 Chip conveyor Coolant through spindle

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 406 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 381 mm, table width: 305 mm, table length: 914 mm, table load: 227 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,200 W, number of slots in tool magazine: 31, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS Super Mini Mill was manufactured in 2024. It features impressive travels of 406 mm in the X-axis, 356 mm in the Y-axis, and 381 mm in the Z-axis. The machine includes a robust table size of 914 x 305 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill vertical machining centre we have for sale. Contact us for further details. • Condition: Showroom machine • Working hours: 0 • Spindle nose to table: max 19.0 in / 483 mm; min 4.0 in / 102 mm • Spindle max torque: 22.0 ft-lbf @ 5000 rpm / 29.8 Nm @ 5000 rpm • Spindle drive system: Direct Speed, Belt Drive • Spindle bearing lubrication: Air / Oil Injection • Spindle cooling: Air Cooled • Table length: 36.0 in / 914 mm • Table width: 12.0 in / 305 mm • Table T-slot width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • Table T-slot center distance: 4.33 in / 110 mm • Number of standard T-slots: 3 • Max cutting feedrate: 833 ipm / 21.2 m/min • Rapids (X/Y/Z): 1200 ipm / 30.5 m/min • Max thrust (X/Y/Z): 2000 lbf / 8896 N • Tool changer type: Side-Mount Tool Changer (SMTC) • Tool changer capacity: 30+1 • Max tool diameter (full): 2.5 in / 64 mm • Max tool diameter, large (adjacent empty): 5.0 in / 127 mm • Max tool length (from gage line): 7.00 in / 178 mm • Tool-to-tool (avg): 2.80 s • Chip-to-chip (avg): 4.20 s • Coolant capacity: 45 gal / 170 L • Air required: 4 scfm @ 100 psi / 113.0 L/min @ 5.5 to 6.9 bar • Inline air hose & coupler: 3/8 in • Input AC voltage (3 phase) - Low / High: 220 VAC (30 A) / 440 VAC (15 A) Tjdpfxez Nxwij Apdod • Shipping dimensions: 90.0 in x 80.0 in x 99.0 in / 229 cm x 203 cm x 252 cm • Shipping weight: 4650 lb / 2109.2 kg Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 1999, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 410 mm, controller manufacturer: Brother, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, Vertical boring and milling center Brother TC-22A with 4th axis Year of manufacture: 1999 Control system: Brother Technical data: Spindle speed: max. 12,000 rpm Tool holder: BT 30 Number of magazine positions: 26 Travel ranges: X-axis: 500 mm Y-axis: 400 mm Z-axis: 410 mm 4th axis: 0.001° Accessories: Tjdpfx Apjykb Rkjded Nikken rotary table Base plate zero-point clamping system We have 2 identical machines in stock. Both machines are fully operational.

Condition: excellent (used), Year of construction: 2018, 2018 Fanuc Robodrill D21MIB5 Twin Robot Machining Cell with (2) Fanuc Series 31I-Model B5 CNC Controls Cell Comprising: Twin Fanuc Robodrill Type A04B-0104-B181 Vertical Milling & Drilling Machining Centres (S/Nos. P186ZG729 & P186ZG731). Table Size Approx 650mm x 400mm. Travel: 'X' Approx 500mm, 'Y' Approx 400mm, 'Z' Approx 330mm. Max Table Load 300kg. Number of Tool Pockets 21. Max Tool Length 250mm, Max Tool Weight 3kg. BT30 Spindle Taper. Max Spindle Speeds 10,000 RPM. Nikken TAT-170N (2018) Pneumatically Operated Rotary Support Table with 4th Axis Fanuc DDRiB-104-B181STD. ABB Flexloader SC3000XL Extended Conveyor Loading System (S/No. M180057-1) with Fanuc ABB 6 Axis Robot IRB 4600 & Fanuc ABB 6 Axis Feeder Robot IRB 1200 with Schunk Grab. Feed In/Feed Out Belt Conveyors. ABB Flexloader Vision. FSE E7326 Filtration, 950 Litre Capacity Coolant & Swarf Management System. Andreas Maier AMF 6906/61919 Hydraulic Equipment. Todez E Sbrspfx Apdsd This Cell Includes: Euro 250 Bowl Feeder on Stand with CVIC Digital Control. Desoutter ECS16-M20 Current Controlled Screwdriver. Robot Pendant ABB DSQC 679. Signal Tower Lights. Transformers. Weight of each Machining Centre Approx 2,400kg. Floor Space Required for Full Cell Approx 8,000mm x 6,500mm. 3 Phase Power Supply, 415 Volt. Fixtures Not Included. Swarf Bins Not Included. Viewing Recommended.

Condition: good (used), Year of construction: 2005, functionality: fully functional, spindle speed (max.): 12,000 rpm, coolant supply: 10 bar, The machine is equipped with a chip conveyor. Tedpfjz Iii Eox Apdod