Vertical machining center

MAZAK NEXUS VCN 410A

Condition: used, functionality: fully functional, machine/vehicle number: M5608*10687, Year of construction: 2001, operating hours: 35,000 h, load capacity: 13,600 kg, lifting height: 5,250 mm, free lift: 1,750 mm, fuel type: diesel, mast type: triplex, construction height: 3,200 mm, fork length: 2,400 mm, empty load weight: 19,321 kg, total length: 5,455 mm, drive type: Diesel, construction width: 2,550 mm, Heavy-duty forklift - Diesel Chassis number: M5608*10687 Load center: 600 Mast type: Triplex Transmission: Clark 13.7HR32334-104 Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Fedpfxoyldxmo Ah Ejpp Front tire size: 12.00-20 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 12.00-20 Rear tire condition: 40 - 60% Side shifter, fork positioner, Full cab, twin tires,

Condition: used, functionality: fully functional, total height: 1,900 mm, total width: 1,200 mm, overall weight: 1,200 kg, input voltage: 400 V, Equipment: documentation/manual, type plate available, Precision cross-honing machine Used Sunnen Eclipse EC-3500 CGM-27 Bore diameter – Honing range: 1.5 – 165 mm Stroke length – Honing length: 6 – 170 mm Spindle speeds: 200 – 3,000 rpm Stroke rates: 60 – 500 strokes Total power requirement – Spindle drive: 4.1 kW Stroke motor: 1.1 kW Machine weight: approx. 1200 kg Depth: 1.6 m Width: 1.2 m Height: 1.9 m SICK safety light curtain Oil filtration / filter system for the honing oil is integrated – spare filter cartridges available Horizontal cross-honing machine / honing machine, type EC 3500, and operating manual for the honing machine Documentation/manual, nameplate available An inspection while the machine is powered on is possible after prior appointment. Fpedpfx Asyx Dv Hsh Ejp Price upon request All technical specifications are subject to typographical errors and omissions. Sale exclusively to countries within the EU.

Condition: reconditioned (used), Year of construction: 2008, operating hours: 13,600 h, functionality: fully functional, machine/vehicle number: 106, Machine partially overhauled by Willemin with new geometry and a new secondary spindle (6,000 rpm). New ball screws on X-Y-Z axes. Alignment and calibration. Ready for production. 5 axes – Fanuc 31i A5 – HSK40E – max 30,000 rpm – Year 2008. Country of manufacture: Switzerland Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2,500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 X axis: 450 mm Y axis: 200 mm Z axis: 425 mm B axis: -45° to +100° U axis: 300 mm Tool magazine: 48 PickUp stations Fjdpfow T Tlrox Ah Espp Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motor spindle: HSK40E, max 30,000 rpm All technical details are given without obligation and subject to errors or omissions.

Condition: new, Year of construction: 2024, 1050 mm 5.5 mm 5.0 mm roll diameter 130 / 195 mm 2.2 kW 1050 kg 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Fjdpfxeq Sz Ahj Ah Ejpp Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: used, Year of construction: 2002, Deckel Maho DMU 50 T Milling machine Condition: Used Year of manufacture: 2002 Operating hours: 34,739 hours Program running time: 6,435 hours Technical data Tool holder: SK 40 Number of tool positions: 16 Travel ranges X/Y/Z: 500 mm / 400 mm / 400 mm Spindle speed range: 20 - 9000 rpm, stepless Table size: 700 mm x 500 mm, rotary table Motor power: 9 kW at 100% duty cycle / 13 kW at 40% duty cycle Connection: total 17 kVA Weight: approx. 3,000 kg Fpodszhlq Iopfx Ah Esp Dimensions L x W x H: approx. 2100 m x 1520 (without peripherals) approx. 2140 mm

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Fpjdpfxouz If Ns Ah Esp Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, TECHNICAL DETAILS - number of spindles : 6 independent - bar clearance : 32 [mm] - maxi spindle speed : 6 300 [rpm] - machine equipped with 28 numerical axes - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - INDEX C200-4 control (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar feeder Fsdpfxeuhauye Ah Espp - Coolant tank: KNOLL AE 1076 * with high-pressure pump - KNOLL VRF 500 chips conveyor - Parts catcher with conveyor in position 6

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 Fodpfewix Hhsx Ah Espp rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, *

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube Fjdpfx Ahev Iq Ezo Ejpp 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), CHIRON DZ 18.2 KW, YOM 2012 Control: Fanuc 31i Path: X / Y / Z 630 x 520 x 400 mm, Pallet changer 2x 940 x 470 mm, 2 spindles Spindle distance 320 mm, Fodjuviiwepfx Ah Eopp 2×32-fold tool changer SK40 tool Max. Spindle rotation 10,000 rpm