Used center lathes 400-499mm turning diameter over bed for sale (198)

Condition: new, Parallel lathe with display Fervi T075/400V3A. Monoblock cast iron base. Height of Centers 230 mm Max. diameter on Bench 460 mm Max. diameter on Carriage 270 mm Max. diameter on Slot 690 mm Tool Height 25 mm Distance between Centers 1500 mm Distance between Guides 300 mm Bar Taper CM MT7 Bar Passage 58 mm Spindle Attachment Camlock D1-8 Spindle Speed (12)25-1700 rpm Longitudinal Feeds (42) 0.031 - 1.7 mm/rev Cross Feeds (42) 0.014 - 0.784 mm/rev Metric Threads (41) 0.1 - 14 mm Inch Threads (60) 2 - 112 TPI Tailstock Spindle Stroke 130 mm Tailstock Taper CM MT4 Motor 400 V 50 Hz 5.5 kW Coolant Pump 400 V 50 Hz 90W Machine Dimensions 2750 x 1080 x 1370 mm Net Weight 2020 kg Total Dimensions 2870 x 1180 x 1570 mm Gross Weight 2200 kg Accessories Included: 3-jaw self-centering chuck Ø250 mm / D1-8 4-jaw self-centering chuck Ø300 mm / D1-8 Bledpfsvbqv Hjx Aknep Drive flange Ø350 mm Fixed steady rest Moving steady rest Reduction bushing CM 7 / 4 Fixed tailstock CM 4 Rotary tailstock CM 4 Thread comparator Turret guard Spindle guard Rear splash guard Quick change turret type B LED lamp Cooling system Electromechanical foot brake Bathed carriage gears oil Quick-lock tailstock carriage

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 Bljdpfx Aksk Egrpsnep - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: new, Year of construction: 2026, CORMAK 410 × 1000 Universal Lathe is a conventional metalworking machine designed for precise and efficient machining in industrial facilities, machine shops, and maintenance workshops. Built with high-quality components and advanced engineering solutions, this lathe delivers exceptional reliability, repeatability, and versatility for continuous production applications. Key Features Versatile machining capabilities – suitable for external and internal turning, taper turning, metric, imperial, module, and DP threading, drilling, and boring operations. 3-axis Digital Readout (DRO) with optical scales provides precise positioning and full control of the longitudinal, cross, and top slide movements. 250 mm hardened and precision-ground cast iron bed ensures excellent rigidity, vibration damping, long service life, and machining accuracy. 52 mm spindle bore with a reinforced bearing system provides stable operation when machining larger workpieces. Direct spindle speed and feed selection from an ergonomic control panel enables quick setup and intuitive operation. Bodpfeiz Tf Sex Aknelp Wide threading range without changing change gears – supports 42 metric and imperial thread pitches, 18 module pitches, and 21 diametral pitch (DP) threads. Removable gap bed allows machining of workpieces up to Ø580 mm in diameter. Construction and Technology The CORMAK 410 × 1000 is built around a rigid cast iron frame with a precision-machined bed, ensuring outstanding stability, long-term accuracy, and reliable operation. The spindle features a D1-6 Camlock spindle nose with an MT6 spindle taper, providing excellent concentricity and high load capacity. The headstock transmission offers 16 spindle speed ranges (45–1800 RPM), allowing optimal cutting conditions for a wide variety of materials and machining applications. Technical Specifications Specification Value 3-jaw chuck 200 mm Swing over bed 410 mm Swing over cross slide 255 mm Swing over gap 580 mm Distance between centers 1000 mm Center height 205 mm Top slide travel 145 mm Cross slide travel 225 mm Longitudinal carriage travel 750 mm Bed width 250 mm Spindle bore 52 mm Spindle nose D1-6 Camlock Spindle taper MT6 Tool post dimensions 100 × 100 × 32 mm Maximum tool size 20 × 20 mm Spindle speeds 16 ranges (45–1800 RPM) Metric thread range 42 pitches, 0.2–14 mm Imperial thread range 42 pitches, 2–72 TPI Module thread range 18 pitches, 0.3–3.5 MP Diametral Pitch (DP) threads 21 pitches, 8–44 DP Longitudinal feed rates 17 feeds, 0.05–1.7 mm/rev Cross feed rates 17 feeds, 0.025–0.85 mm/rev Tailstock quill diameter 50 mm Tailstock quill travel 120 mm Tailstock taper MT4 Main motor power 2.2 / 3.3 kW Coolant pump power 0.1 / 0.12 kW Machine dimensions (L × W × H) 2050 × 900 × 1650 mm Net weight 1600 kg Standard Equipment 3-axis Digital Readout (DRO) with optical scales 200 mm 3-jaw chuck with internal and external jaws 250 mm 4-jaw chuck 350 mm faceplate Fixed steady rest Follow rest MT4 dead center MT6/MT4 spindle reduction sleeve Complete set of change gears Coolant system Work light Oil can Chuck key and tool post wrench Complete service tool kit CE-compliant safety guards User manual CE Declaration of Conformity Six vibration isolation mounts

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 37910 € 724.08 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm Blsdpfx Aoxzuu Aoknjp 120 - 4 Gänge/" 0.0625 - 1.875 480 - 16 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTH (PRICE ON REQUEST): turning length 750 mm

Condition: new, Center distance ----- 1500 mm Center height ----- 230 mm Swinging diameter ----- 460 mm Headstock bore ----- 80 mm Bed width ----- 336 mm Spindle speed ----- 25-1800 rpm Motor ----- 5.5 KW HEAVY-DUTY DESIGN - WEIGHT 2650 KG INCLUDES * 3-axis digital readout, brand SINO * Quick-change tool holder, type Multifix TOOB2 with 4 tool holders Blodpfxsh U Nztj Aknep * 3-jaw chuck, 250 mm * 4-jaw chuck, 320 mm * Faceplate, 350 mm * Fixed and follow rest * LED work light and cooling system * Electric brake, CE * Toolbox with various tools

Condition: new, neu Bulgarien 42910 € 819.58 € 400 mm 750 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK 4 18-98; 48-265; 144-790; 3 U/Min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 7.5 kW 1530 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp Bodpfxjyq Stij Aknslp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 43.630,-

Condition: new, Year of construction: 2025, turning diameter: 410 mm, turning diameter over top slide: 255 mm, center height: 205 mm, turning length: 1,000 mm, total length: 1,940 mm, total width: 850 mm, total height: 1,550 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 45 rpm, bed width: 250 mm, Turning diameter in gap: 580 mm, type of input current: three-phase, overall weight: 1,550 kg, three-jaw chuck diameter: 200 mm, Center length ----- 1000 mm Center height ----- 205 mm Turning diameter ----- 410 mm Headstock bore ----- 52 mm Bed width ----- 250 mm Spindle speed ----- 45-1800 rpm Bodjga T D Espfx Aknolp Motor ----- 3 kW INCLUDED * 3-axis digital readout, brand SINO * Quick-change tool holder, type Multifix TOOB2, with 4 tool blocks * 3-jaw chuck, 200 mm * 4-jaw chuck, 250 mm * Faceplate, 350 mm * Fixed and follower rest * LED work light and cooling system * Electric brake CE * Tool kit with various tools

Condition: new, TC 180 x 1000 V Center distance: 1000 mm Center height: 178 mm Swing over bed: Ø 356 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, stepless: 30 - 2500 RPM Mechanical feed steps: 3 Motor power: 2.2 kW Longitudinal feed Z: (40) 0.044 - 1.96 mm/rev Cross feed X: (40) 0.022 - 0.98 mm/rev Metric thread: (32) 0.4 - 7.0 mm Inch thread: (32) 4 - 56 TPI Module thread: (32) 0.4 - 7.0 Diametral thread: (32) 7.5 - 112 Tailstock spindle diameter: Ø 40 mm Tailstock spindle taper: MK 3 Tailstock quill travel: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Dimensions, approx.: 1880 x 880 x 1390 mm Features: - Acceptance test report according to DIN - Precise, hardened, and ground guides - Robust headstock with oil circulation lubrication, precision-bearing spindle, gears hardened and ground for lasting quality - Electromagnetic spindle brake (TC), frequency converter with electric braking system (V models) - Torsion-resistant machine beds made of MEEHANITE quality cast iron, stress-relieved by annealing and with multiple ribs for maximum running smoothness - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed gear - Pulse button for main spindle - CE / IEC as well as German documentation and German service Standard equipment (standard accessories): - Machine stand with splash guard back panel - 3-jaw chuck - 4-way tool post - Foot pedal with mechanical braking system - Coolant system - Chuck guard and spindle cover in accordance with European CE safety standards - 1 Fixed center for main spindle - 1 Fixed center MK3 - 1 Test report - Safety devices and electrical equipment according to CE - Reducing sleeve for main spindle operating tool Available options for this lathe: - 3-axis digital display - Quick-change tool holder system Multifix Bjdjir Imyopfx Aknolp also available as geared variants

Condition: new, TC 205 x 1000 CVS Trade fair machine, color blue Technical data: Turning diameter over bed: 410 mm Center height: 205 mm Turning diameter over cross slide: 234 mm Turning diameter in offset: 610 mm Bed width: 280 mm Center distance: 1000 mm Number of spindle stages: 8 Speed range: 80 - 2000 1/min Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle mount: MK 6 Travel of tailstock spindle: 130 mm Tailstock mount: MK 4 Max. tool size: 22 mm Travel of cross slide: 225 mm Travel of top slide: 130 mm Thread inch: 2 - 72 T.P.I Thread metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange Bedpfsvzmtzsx Aknjlp - Fixed steady rest - Splash guard rear panel - 4-way tool holder - Foot brake - Emergency stop switch - Coolant device - Chip tray - Fixed centering point - Change gear set - Reducing sleeve for main spindle - Machine shoes - Operating tools - Operating instructions

Condition: new, functionality: fully functional, spindle bore: 52 mm, turning diameter: 410 mm, turning diameter over top slide: 250 mm, center height: 205 mm, turning length: 1,500 mm, total length: 2,440 mm, total width: 915 mm, total height: 1,550 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 45 rpm, bed width: 250 mm, Turning diameter in gap: 580 mm, overall weight: 1,400 kg, three-jaw chuck diameter: 200 mm, Center distance ----- 1500 mm Center height ----- 205 mm Turning diameter ----- 410 mm Headstock bore ----- 52 mm Bed width ----- 250 mm Bledpfx Akoh U Nxmsnsp Spindle speed ----- 45-1800 rpm Motor ----- 3 kW INCLUDED * 3-axis digital readout system, brand SINO * Quick-change tool holder, Multifix TOOB2 type, with 4 tool posts * 3-jaw chuck 200 mm * 4-jaw chuck 250 mm * Faceplate 350 mm * Fixed and follow rest * LED work light and cooling system * Electric brake CE * Toolbox with various tools

Condition: new, Center distance ----- 1000 mm Center height ----- 230 mm Swinging diameter ----- 460 mm Main spindle bore ----- 80 mm Bed width ----- 336 mm Spindle speed ----- 25-1800 rpm Motor ----- 5.5 KW HEAVY-DUTY DESIGN - WEIGHT 2400 KG INCLUDES * 3-axis digital read-out system, brand SINO * Quick-change tool holder, type Multifix TOOB2, with 4 tool holders * 3-jaw chuck 250 mm * 4-jaw chuck 320 mm * Faceplate 350 mm Bjdpoga Tz Ujfx Aknjlp * Fixed and follower steady rest * LED work light and coolant system * Electric brake CE * Toolbox with various tools

Condition: new, Year of construction: 2026, Precision lead and feed screw lathe Manufacturer: OPTIMUM Model: OPTiturn TZ 4 Item No.: 3432240 Condition: New machine Center height: 200 mm Distance between centers: 800 mm Spindle speed: 45 - 1,800 rpm (16 steps) Standard equipment: - 3-axis digital display DPA 32 Bledpfegqw U Rex Aknep - Fixed center, MK 3 - Quick-change tool post, size B - Turning tool holder BD - Reducing sleeve MK 6 / MK 3 - Steady rest, fixed, ø 10 - 130 mm - Traveling steady rest, ø 10 - 100 mm - Coolant system - Chip tray, pull-out - LED machine lamp - Operating tools

Condition: new, Precision guide and lead screw lathe Manufacturer: OPTiturn Model: TM 4010 D Article number: 3403045 Condition: New machine Center height: 200 mm Distance between centers: 1,000 mm Spindle speed: 70 - 2,000 rpm (8 steps) Standard equipment: - 3-axis digital display DPA 31 PLUS - Machine base Bodpfsilup Nsx Aknjlp - 3-jaw chuck 200 mm - LED machine light - Reduction sleeve MK 4/MK 6 - Fixed center MK 4 - Steady rest, fixed - Steady rest, following - Quick-change tool holder base E - Turning tool holder ED - Chuck guard, electrically secured - Oil filling - Operating tools - Operating manual

Condition: new, Precision guide and lead screw lathe Manufacturer: OPTIMUM Model: OPTiturn TZ 4V Art. No.: 3432245 Condition: New machine Center height: 200 mm Center distance: 800 mm Speed: 50 - 3,000 rpm Continuously adjustable via 2 gear stages with SIEMENS inverter-controlled variable speed drive Standard equipment: - 3-axis digital display DPA 32 - Digital speed display in the headstock Bjdpfxsg Hkmrj Aknjlp - Fixed center MK 3 - Quick-change tool holder, size B - Turning tool holder BD - Reduction sleeve MK 6 / MK 3 - Fixed steady rest, ø 10 - 130 mm - Traveling steady rest, ø 10 - 100 mm - Coolant system - Chip tray, pull-out - LED machine light - Operating tools

Condition: new, Precision guide and lead screw lathe Manufacturer: OPTiturn Model: TM 3310 D Art. No.: 3403025 Condition: New machine Center height: 165 mm Center distance: 1,000 mm Spindle speed: 65 - 2,000 rpm (9 steps) Standard equipment includes: Blodpfx Akjh I N Sbonsp - 3-axis digital display DPA 31 PLUS - 3-jaw chuck 160 mm - Electrically braked main motor - Machine base with chip tray - Four-position tool holder - LED machine light - Reduction sleeve MK 5/MK 3 - Fixed centers MK 3 - Chuck guard, electrically secured - Set of change gears - Oil filling - Operating tool - Operating manual

Condition: new, WORKING RANGE TURNING - swing diameter (max) 470 mm - turning diameter (max) 235 mm - worpiece length max. 1000 mm BED GAP / BRIDGE - swing in gap 690 mm MAIN SPINDLE - spindle bore diameter 58 mm - spindle revolutions (min) 20 /min - spindle revolutions (max) 2000 /min - number of gears 12 - spindle diameter 58 mm SCREW CUTTING SPINDLE - advance z-axis (min.) 0.05 mm/r - advance z-axis (max.) 0.82 mm/r - advance x-axis (min.) 0.02 mm/r - advance x-axis (max.) 0.4 mm/r TAILSTOCK - taper: MK 4 ELECTRICAL SPECIFICATIONS - total power consumption 5.5 kW DIMENSIONS / WEIGHTS - space requirements -left/right- 1900 mm - space requirements -front/back- 810 mm - total height 1220 mm - total weight approx. 1800 kg << Machine is in stock at 6500 Landeck / TIROL and can be viewed under power.>> The machine is available with peak widths from 760mm to 2000mm. This offer is a storage machine at a promotional price (Original price incl. These options: 28962.- ) We will send you a non-binding offer with your desired specifications. -> Description as well as standard and special equipment can be found in the PDF file. This storage machine is equipped as follows: Including the following standard accessories, u. a .: Bsdpfx Akofcqtconelp - 3-way precision spindle with SKF (FAG) bearings - Spindle brake mechanically - Complete electrical equipment - Coolant device with rear splash guard and splash guard on the slide - Food protection - Shift rod with 3 adjustable cams - Solid grain tip - Covered tension spindle - Set of machine mounting plates - Machine lamp 24 V - Operating instructions with test report - CE conformity declaration Incl. Special accessories, u. a .: Article no. 5200 B Steel holder head B, type Multifix (without tool holder) Article no. 6405 DA3A-470-1000 Digital Position Indicator ARBAH (Made in EU) 1 for SJ-470 / 1000S, including counter, 3 scales, Stands, covers and mounting Article no. 5300 3544-250-6 3 jaw lathe chucks BISON, steel body Ø 250 mm, Camlock D-6, concentric clamping, bore Ø 76 mm each with a set of one-piece turning and drilling jaws

Condition: new, TC 205 x 1000 Center height: 205 mm Swing over bed: 410 mm Distance between centers: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, Size 6 Cross slide travel: 220 mm Top slide travel: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Continuously variable Mechanical pre-selection stages: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feed Z: 0.05 - 1.7 mm/rev Cross feed X: 0.025 - 0.85 mm/rev Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametral threads: (21) 8 - 44 DP Module threads: (18) 0.3 - 3.5 MP Tailstock diameter: 52 mm Tailstock quill: MK 4 Tailstock travel: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Features: - Tool machine accuracy according to DIN 8605 - Continuously variable speed control (2 pre-selection stages) - Finely balanced main spindle - Stable machine bed with hardened and ground guides - Monolithic cast iron base - Adjustable precision tapered roller bearings in the main spindle - Easy-to-operate feed gear with a large feed range, running in a closed oil bath. - Low-maintenance central lubrication - Removable bridge Scope of supply: - 3-axis digital display (resolution 0.005 mm) - 3-jaw chuck - Quick-change tool holder with four cassettes - High splash guard and integrated LED work light - Chip tray that can be extended forward - Slip clutch - Fixed steady rest with ball bearing inserts Blsdpsir If Dofx Aknjp - Traveling steady rest - Micrometer bed stop - Machine feet (1 set of 6 pieces) - Two emergency stop push buttons - Foot pedal with double braking system (mechanical and electrical) - End-switch protected chuck guard, tool holder guard and cover for the lead screw and ball screw in accordance with European safety standards CE - Coolant system - 2 fixed centering points - Reduction sleeve for main spindle - Operating tool - Operating tool in a tool box - Operating manual with parts list

Condition: new, Precision lead and drive spindle lathe Manufacturer: OPTiturn Model: TH 4210 Item No.: 3462050 Condition: New machine Center height: 210 mm Center distance: 1,000 mm Standard equipment includes: - Machine base - Four-position tool holder - LED machine light - Reducing sleeve MK 6/MK 4 - 2 fixed centering spindles MK 4 - Fixed steady rest, 15 – 105 mm - Traveling steady rest, 10-65 mm - Chuck guard, electrically interlocked - Coolant system - Set of change gears - Oil supply Bodpfedbgxcox Aknolp - Operating tools - Operating manual

Condition: new, swing diameter: 400turning length: 1000speed range: 70 - 2.000 min¯¹weight approx.: 500 Bledpfx Aksd Eaukjnsp

Condition: new, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 235 mm Center distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 7.5 kW Spindle speed range: 20-2000 mm Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Bjdpfxou T Hius Aknslp Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: new, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter over bed slide: 430 mm, center height: 215 mm, turning length: 760 mm, quill stroke: 127 mm, quill diameter: 58 mm, total length: 1,885 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,680 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 215 mm Center width: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Motor power: 7.5 kW Spindle speed range: 20-2000 mm Weight approx. 1680 kg Blsdpou T E Ehjfx Aknjp Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: new, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Maximum height: 235 mm Distance between centers: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 rpm Features include: Bodpfjcirniox Aknelp Hardened and precision-ground Z-axis guide rails Turcite coatings (on the mating surface) of the tool and cross slides Manual central lubrication system with one pump for the longitudinal and cross slides Complete coolant system with a rear splash guard and a splash guard on the slide Chuck guard Selector lever with 3 adjustable cams Machine light Fixed center Set of machine mounting plates

Condition: new, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter over bed slide: 430 mm, center height: 215 mm, turning length: 760 mm, quill stroke: 127 mm, quill diameter: 58 mm, total length: 1,885 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,680 kg, quill mount: MK 4, Maximum height: 215 mm Distance between centers: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029, Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 rpm Weight approx. 1680 kg Features include: Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication system with one pump for the longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Bledpfx Akocir Anenjp Gearshift lever with 3 adjustable cams Machine light Fixed center Set of machine mounting plates