Lead/traction spindle lathe

OPTIMUM OPTIturn TZ 4

Condition: good (used), Year of construction: 2017, OPTIMUM TZ 4V – Lead and Feed Screw Lathe from Laboratory Use -Year of manufacture: 2017 -CE marking -3-axis digital readout -Center height: 200 mm -Center distance: 800 mm -Swing over bed: 400 mm -Swing over cross slide: 245 mm -Spindle speed range: 50–3000 rpm / 2 stages -Spindle bore: 52 mm -Automatic longitudinal and cross feeds -Thread cutting (Imperial/Metric/Diametral/Module threads) -Drive motor: 5.5 kW -Tailstock: Morse taper 3 -Two three-jaw chucks -Four Multifix tool holders -Steady rest & follow rest -Chuck guard -Sliding chip guard -Work light -Coolant system Lodextaccopfx Agreai -Machine feet -Documentation Dimensions: LxWxH: 2.1 x 1.2 x 1.7 meters / Weight: 1,400 kg Errors and omissions excepted

Year of construction: 2021, condition: as good as new (ex-display), Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Hydraulic clapming for fixtures - Latest Machine Generation Basic machine G640 Work area travel range: X = 1.050 mm, Y = 800 mm, Z = 1.050 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Machine cooling system with an air-cooled cooling unit Machine control series FANUC 31i-MODEL B Plus Cycle package for measuring probes (RENISHAW) Control panel to enter tool data at tool loading and unloading position Rotary table with GROB pallet clamping system (B-axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication GROB spindle diagnostics GSD Single disc-type magazine HSK-A 63 with 50 pockets Tool cleaning device Electromechanical tool breakage detection device Twin palette changer Setup station driven by a three-phase servomotor Setup station door, manually-operated, for manual loading/unloading Additional control panel Pallet 630 x 630 mm, T-slots Equipping the pallet with 12 fluid connections Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (23 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Cutting fluid recirculation on the weekend Flush gun at the work area Air gun at the work area Part clamping system in work area, customer-specific Hydraulic power unit for the part clamping system KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Cooling unit for hydraulic proportional valves Part clamping system in setup station of pallet changer, customer-specific KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP7: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP10: Compressed air, seating check system (P2.1) Laodpjlaugaofx Agrei KP11: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) KP12: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) Touch probe Renishaw RMP60 12-month warranty

Condition: new, Precision Center Lathe and Center Lathe Make: OPTIMUM Model: OPTiturn TZ 4V Item No.: 3432245 Condition: New machine center height: 200 mm center width: 800 mm speed: 50 - 3.000 rpm infinitely variable via 2 gear steps with SIEMENS Inverter-Vario-drive equipped as standard with: - 3-axis digital display DPA 32 - digital speed display in headstock - fixed center point MK 3 - quick change tool holder size B - turning toolholder BD - reducing sleeve MK 6 / MK 3 Laedpfx Agjg Hkmrjroi - steady rest fixed ø 10 - 130 mm - steady rest travelling ø 10 - 100 mm - Coolant device - Chip tray, extendable - LED machine light - Operating tool

Condition: new, Optimum OPTIturn TZ 4 precision center lathe and feed spindle lathe Precision center lathe with digital position indicator DPA 32 and quick-change steel holder. DESCRIPTION: Hardened and ground Z-axis guideway Motor protection switch Switch cabinet with 24 V DC power supply unit Partial cladding with included, generously dimensioned chip guard Chip guard with integrated position indicator, coolant hose and additional control panel Two-channel safety electronics Face and top slide spindle is hardened and ground and can be adjusted via split spindle nut Lead and feed spindle cover Finely graduated feed and thread cutting range Energy chain for gentle cable and hose guidance The standard gear wheels for metric thread pitches and modular threads are mounted in the machine. Change gears for inch and D.P threads optionally available Switch with life cycle calculation tested in accordance with EN ISO 13849 Decoupled handwheels tested in accordance with EN 23125 Safety handwheels with disengagement function in the X and Z axes Chip tray can be pulled out to the front Coolant device Quick-change steel holder SWH 5-B Steel holder 25 x 120 type D for square chisel 20 mm LED machine lamp for complete illumination of the work area Technical data: Dimensions and weights Length (product) approx. 1960mm Width/depth (product) approx. 1060mm Height (product) approx. 1690mm Weight (net) approx. 1250kg Working ranges Center height 200mm Center width 800mm Rotation diameter over machine bed 400mm Swing diameter over cross slide 245mm Bed width 260mm Speed range Number of speed ranges 16 Speed range 45 - 1800min¯¹ Electrical data Power drive motor 3 / 4.5kW Supply voltage 400V Mains frequency 50Hz Total connected load 6kW Cooling lubricant system Cooling lubricant system Power Coolant pump 0.125kW Spindle Spindle holder DIN ISO 702-1 No. 5 Form A2 Spindle bore/bar passage diameter 52mm Chuck passage diameter 52mm Spindle cone MK 6 Tailstock Tailstock holder MK 3 Tailstock quill stroke 110mm Tailstock quill diameter 50mm Pitch Pitch Metric 0.2 - 14mm/rev Number of leads metric 26 Pitch inch 80 - 1Gg/1" Number of pitches inch 42 Pitch Diametral Pitch 3 - 200Gg/π Number of pitches Diametral Pitch 33 Module thread pitch 0.1 - 7mm/rev Number of module thread pitches 44 Travel distance Top slide travel 112mm Travel of face slide 212mm Bed slide travel 800mm Feed rate Feed range longitudinal 0.0263 - 1.8416mm/rev Number of feeds longitudinal 48 Feed range flat 0.0133 - 0.9321mm/rev Number of feeds flat 48 Scope of delivery Fixed steady rest passage Ø 10 - 130 mm Rotating steady rest passage Ø 10 - 100 mm Lasdpohbdz Sofx Agroi Reducing sleeve MK3 and MK6 Fixed center point MK3 Quick-change steel holder 5-B Steel holder 25 x 120 type D for square chisels Set of change gears for metric thread Initial machine filling with quality oil Operating tool Integrated coolant system

Condition: new, Special offer price for stock items. Only while stocks last. Price ex warehouse, plus VAT. Workshop press WK 50 FH Pro Pressure force: 50 t Piston stroke: 200 mm Table width: 260 mm Passage (E): 730 mm Passage (F): 205 mm Distance cylinder - table (F1): 75 mm Distance cylinder - table (F2): 1050 mm Cylinder movable (M): 240 mm Width (A): 1040 mm Depth (B): 800 mm Height 1 (C): 1835 mm Height 2 (D): 1880 mm Weight approx.: 287 kg Features: - With cable winch for easy height adjustment of the support table - Self-regulating hydraulics for energy-saving piston feed - Powerful workshop presses for craft and repair businesses - Optimum price-performance ratio thanks to rational design - The standard foot pedal keeps your hands free for the workpiece - Increased application area thanks to the optionally available pressure mandrel set (10 pieces). - Pressure cylinder with integrated return spring for piston return - Welded steel frame for heavy use and high stability - Versatile use thanks to pressure cylinder that can be moved to the left and right Lodpfx Agob Elgusrjai SPECIAL PRICE from the Mindelheim warehouse. Only for stock items. While stocks last.

Condition: new, Year of construction: 2025, 20T Premium Plus Ramp, usable internal width 20m. TM-GROUP – the best choice on the market. ⭐️ Galvanized grid on the ramp’s upper section as well! ⭐️ ✅ Specifications: - Manufacturer: TM-GROUP - Maximum load capacity: 20 tons - Internal ramp width: 2000 cm - PREMIUM PLUS variant – galvanized grid also on the upper ramp section (highlighted in red in one of the last photos) - ELECTRIC and manual height control from 1m to 1.6m - Galvanized approach grid - Reinforced side railings on both sides - Solid rubber transport wheels - Central ramp handle allowing repositioning with a forklift - Adjustable tilt and flap height - Reinforced dual-sided ramp supports - Moving parts equipped with grease fittings - Ramp also equipped with a hand winch ✅ Approach Grid: Galvanized grating with anti-slip grooves. A secure and stable surface. Both forklift operation and foot traffic benefit from top-tier grip and solid support. Competitors mainly offer ramps with a metal sheet covered in mesh. Our product features a grooved grating, a much more durable solution. It prevents debris from staying on the ramp and ensures forklifts don't slip. ✅ Forklift Bracket – installable on both sides: Convenient and quick mounting for forklift transport in all directions. A specially designed bracket allows for maneuvering the ramp even in confined spaces. ✅ Chain for connection to TIR truck, railcar, or fixed warehouse ramp: A solid steel chain is another strong point of our ramp, preventing unwanted movement during loading operations. ✅ Durable Side Railings: Protective railing with an option to unscrew and mount a frame/roof (roof is optional). ✅ Electric Height Control: Lajdpfx Agewb A Eleroi Smooth electro-hydraulic drive using a high-quality pump. Requires 230V, meaning it can be powered from a standard socket. ✅ Dual-Action Manual Pump: Hydraulic pump for height adjustment when electro-hydraulic power isn't available – dual-direction lifting. Perfect solution for uninterrupted operation in any conditions. ⭐️ Available variants include: ⭐️ - Approach widths: 1700 cm, 2000 cm, and 2500 cm in Standard, Premium, and Premium Plus versions - Mobile ramps with capacities of 10 tons, 15 tons, 20 tons, and 25 tons - Approach grid thickness: 3 – 5 cm - Colors: red, blue, black, and green (custom colors available upon request) - Mobile ramp with tarpaulin cover As a manufacturer, we can produce custom ramps tailored to specific needs – various sizes, load capacities, or features. Can't find exactly what you're looking for in the listings? Ask our specialist for a tailor-made solution. Tags: Loading ramp, unloading ramp, mobile ramp, mobile loading dock, loading bay, mobile transfer ramp, mobile loading ramp.

Condition: new, The KNUTH Basic 180 Super is a powerful and robust conventional horizontal lathe, designed for metalworking and known as the largest in its category. With an impressive bed width of 206 mm (8 in) and a total weight significantly heavier than similar models, it assures high machining quality ideal for demanding industrial applications. This metal lathe features a cast-iron bed with induction-hardened box ways, a headstock with D1-4′ mount, and a powerful main drive of 2.4 kW, making it perfect for various turning tasks. The Basic 180 Super comes with extensive standard equipment, including a 3-axis position indicator, quick-change tool holder, and a robust coolant system, ensuring efficiency and precision. You can tackle a wide range of projects while benefiting from the rugged construction that minimizes vibrations during operation. For those looking to invest in top-quality equipment, the Basic 180 Super is a standout choice in the category of conventional horizontal lathes and metal lathes. Request a quote now to enhance your workshop's capabilities with this dependable machine. Lasdpfx Agouygz Tersi

Condition: new, Bernardo Center and lathe master 180 incl. 3-axis digital display Top width 1000 mm Tip height 180 mm Swing over bed 360 mm Swing over bend * 480 mm Swing over cross slide 220 mm Bed width 185 mm Spindle bore 51 mm Spindle mount DIN 55029, D1-5 Speed range (8) 70-2000 RPM Range of longitudinal feeds (32) 0,052-1,392 mm / Rev Area plan feeds (32) 0.014 - 0.380 mm / Rev Metric threads (26) 0.4-7.0 mm Inch thread (34) 4-56 Gg/1 " Quill diameter 42 mm Quill trail 110 mm Spindle mount MT 4 S1 engine power output 100% 1.5 kW (400 V) Motor power S6 40% 2,2 kW (400 V) Machine dimensions (W x D x H) 1920 x 750 x 1600 mm Weight approx. 540 kg Bed length removable: 225 mm Scope of delivery • 3-axis digital display i200 with LCD display • 3 - jaw Chuck DK11-200 mm / D5 • Face plate 200 mm / D5, according to DIN 55029 • Fixed bezel - forward diam. maximum 70 mm Diam bezel with • ongoing - forward. maximum 50 mm • Coolant system • Initial filling with Shell Tellus 46 • Pull-out chip tray • Face plate 320 mm • Four-way steel bracket • protective device while the four-way tool post • Slipping clutch • Mikrometerlängsanschlag • Thread watch • LED machine luminaires Ledsd Du Tiepfx Agrjai • Reducing bushing • Change gears • 2 centres • Foot pedal with brake function after CE • motor with magnetic brake according to CE standard • base

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: fortlaufend, Height: 200 mm Centers: 1000 mm Turning diameter over bed: 400 mm Turning diameter over support 220 mm Spindle Bore: 52 mm Speed ​​range: 9-1600 rpm Spindle nose: Bayonet DIN 5027 KK 6 Longitudinal feeds range: 0.028 to 6.43 mm / rev (93 steps) Area cross feeds: 0.012 -2.73 mm / rev (93 steps) Metric threads: 0.5 - 224 (48 steps) Inch threads: 72 - 1 / 8 tpi (46 steps) Module pitch: 0.5 - 112 (42 steps) Diametral thread: 56 - 1 / 4 DP Quill diameter: 75 mm Spindle stroke: 150 mm Taper: Morse taper 5 Motor power: 7.5 kW Weight: 2100 kg Dimensions: 2672 x 975 x 1230 mm Lodpfx Agj Nh Hxjrsai Accessories: Digital display for 3-axis mark SINO, 3-jaw chuck Ø 250 mm, 4-jaw faceplate chuck Ø 400 mm, fixed + follow rest, coolant system, fire wall, rapid, manual lubrication, 4-way tool operating light.

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter over bed slide: 430 mm, center height: 215 mm, turning length: 760 mm, quill stroke: 127 mm, quill diameter: 58 mm, total length: 1,885 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,680 kg, quill mount: MK 4, Tip height: 215 mm Center width: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Weight approx. 1680 kg Ljdpfjcir Ansx Agrsai Equipment including Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates