Center Lathe

OPTIMUM OPTIturn TM 4010 D

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages Dkodortd Uwepfx Afneg - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment Dedpok Egrpefx Afnekg - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: good (used), Morsoe miter punch, machine number 48706, in good condition, available immediately. If you are interested, we will also inform you about other machines in our house. Dsdpfxjh Aka Ij Afnokg You are welcome to visit the machine in our house by appointment.

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Tip width 1000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quilltravel 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,750.00 kg Dedpfxjd I A Dhj Afnskg Dimensions 2500 x 1100 x 1380 mm

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Dkodpfsw I H Rkex Afnog Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: good (used), Year of construction: 1972, turning diameter over bed 330 mm turning diameter over slide rest 200 mm turning length 800 mm Dedpswwl Izofx Afnjkg total power requirement 3 kW weight of the machine ca. 800 kg dimensions of the machine ca. 1,9x0,7x1,2 m turning speed range 24-2800 U/min

Condition: used, Year of construction: 2016, Technical details: turning diameter over bed: 402 mm turning dia. over face-slide: 245 mm turning length: 1000 mm centre distance: 1000 mm centre height: 200 mm swing diameter: in Kröpfung: 560 mm throat: Breite: 120 mm revolution per minute: 40 - 345 / 345 - 1015 / 1015 - 2800 U/min Dodpfjvav Sdox Afnokg feed: längs: 0,05 - 0,752 + quer: 0,025 - 0,376 mm/U spindle diameter: Ø 42 mm tailstock taper ISO: MK4 tailstock quill stroke: 180 mm total power requirement: 4,1 kW Weight approx.: 1,2 t dimension machine xH: 2,4 x 1,0 x 1,7 m Die Drehmaschine verfügt über keinen Eilgang. Positionierung über 2-Achsen Anzeige über Pinacho Lathe Controller Multifix-Stahlhalter mit Drehmeißel Kühlmittelanlage Fußtaster Gewindeschneiden möglich (metrisch, Whitworth, Modul, Pitch) *

Condition: new, The Turnado 280/1500 PRO is a state-of-the-art Conventional Horizontal Lathe from KNUTH, designed for robust and precise machining in the Engine Lathes category. This model embodies over 20 years of excellence, integrating modern advancements into the classic lathe framework. It features a new ergonomic design that enhances user operation and comfort, while the powerful main spindle drive ensures high torque across an extensive speed range. Significantly, the Turnado lathe maintains constant cutting speeds during face turning, adapting to the workpiece diameter for optimal results comparable to CNC machines. Its solid base, consisting of a heavily ribbed bed and rigid headstock, promotes durability and reliability. With features like a central lubrication system for maintenance ease, a micrometer bed stop for repeatability, and a suite of standard equipment, including quick tool change systems and a 3-axis position indicator, this lathe stands out in both performance and efficiency. To experience the benefits of the Turnado 280/1500 PRO for your machining needs in the Engine Lathes category, request a quote today. Dodpfjuyinvox Afnskg

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 105 mm, turning diameter over bed slide: 560 mm, turning diameter over top slide: 356 mm, center height: 280 mm, turning length: 1,500 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, bed width: 350 mm, type of input current: three-phase, three-jaw chuck diameter: 320 mm, Centre length ----- 1500 mm Centre height ----- 280 mm Swing diameter ----- 560 mm Main spindle bore ----- 105 mm Bed width ----- 350 mm Spindle speed ----- 25-1600 rpm Motor ----- 7.5 kW INCLUDES * 3-axis digital readout by SINO Dkjdpfxoga Tvlj Afnjg * Multifix quick change tool post type TOOC3 with 4 tool holders * Electric brake * Foot brake * Self-centering 3-jaw chuck * Independent 4-jaw chuck * Face plate * Fixed and travelling steady rest * LED work light * Coolant system * Box with various tools

Condition: used, Year of construction: 1970, pressure:63 t throat:250 mm stroke:8-100 mm table depth:710 mm table width:500 mm ram head dimension:450x280 mm Dsdpfx Afecxxx Hjnskg ram adjustment:63 mm no. of strokes:140 Hub/min total power requirement:7 kW weight of the machine ca.:3,5 t