Condition: used, Year of construction: 2001, diameter 35 - max. 65 mm Guide channels 6 control SPS Hodpfx Aezz S Aqepdsw max. bar length 3.200 mm bar material dia. min. 35 mm bar material dia. max. 65 mm total power requirement 2 kW weight of the machine ca. 2,0 t dimensions of the machine ca. 4,0 x 1,1 x 1,6 m Multi-Channel-Bar-Feeding-System BREUNING IRCO - 65.6 196.6 - has been installed at a Mori Seiki ZL 200 SMC

Condition: used, Year of construction: 2019, liter capacity 600 l Pressure of pump 8 / 20 bar control Schütze / Contactors weight of the machine ca. 450 kg dimensions of the machine ca. 1,2 x 1,8 x 1,6 m Coolant System BMF - BFU 600 /S2/20/8+ - NEW, unused Hjdpswhzmzefx Apdow - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump performance: 2.6 kW, 3.5 HP, 2,880 rpm, 160 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min

Condition: excellent (used), Year of construction: 2021, overall weight: 8,000 kg, total height: 300 mm, total length: 6,000 mm, total width: 2,000 mm, Make: STOLLE Type: TDG 6/2 Year: 2021 Floorplate Length: 6000mm Floorplate Width: 2000mm Height: 300mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 6000kg Number of matching pieces: 1 Hjdpfx Apsxf Exgodew Length: 6000mm Width: 2000mm Height: 300mm Weight: 8000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block Hedev Adi Aepfx Apdsw -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 200/90/H170 mm -Weight: 8,8 kg

Condition: excellent (used), functionality: fully functional, Hello, We offer used and new pallets for workpiece clamping from Erowa or compatible manufacturers. These are prepared to accommodate clamps with a 52mm pitch. We can also easily adapt clamps with a 96mm pitch. Clamping spigots included. Individual acceptance is possible. Spare parts are available. The clamps are not for sale. The used clamping devices have been cleaned and tested by us. A functional test was also performed. The clamping devices show slight signs of wear. Do you have any questions? We would be happy to help. Hsdpfx Aowa Ihiepdow

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Hodpex T Ah Dofx Apdjw Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: used, Horizontal rotary table Shelf diameter: Ø 700 mm x Height 160 mm Hodpfoz Nht Tex Apdsw Total external diameter: Ø 790 mm Graduation in degrees Rotation by vernier

Condition: used, Year of construction: 2014, 400 V / 50 Hz < 75 dB(A) power capacity 15 kW volume capacity 20.000 m³/h weight 1590 kg Modular plug & play airtower for hall extraction of welding fumes with integrated, soundproofed Fan, automatic, differential pressure controlled Filter cleaning, system control with color display, particle pre-separation and IFA - tested filter cartridges. The system is for a volume flow of average 20,000 m³ / h designed 1st filter stage - main filter: Hedpfez I Ucqsx Apdow Filter area: 222 m² Number of filters: 6 pieces Dust class according to DIN EN 60335-2-69: M. Degree of separation:> 99.9% Cleaning: Jet - Pulse Compressed air connection: NW 7.2 mm, 4-6 bar, oil and water free 2nd filter stage - fine dust filter. Filter area: 65 m² Filter class according to ISO 16890: ISO ePM1 80% 3rd filter stage - Synthetic fiber mats: Filter area: 8 m² Filter class according to ISO 16890: ISO coarse 60% Total filter area: 295 m² Dimensions: Width filter unit: 2,066 mm Depth filter unit: 1,756 mm Height of filter unit: 3,643 mm Dust container: 200 liters

Condition: used, Year of construction: 2006, Spare parts for Hurco VM1, manufactured in 2006 Hodpfx Ajzx Sqiepdow - F7 spindle drive CIMR-F7UXXXXX-063 AC drive Software version: VSF11006X Price: €800 - Ejector cylinder Price: €100 International shipping can be arranged.

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231316, Technical Data – Used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Hedpfx Apjz E N Tledew Year of manufacture 2012 Extraction capacity approx. 500 m³/h Motor output approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W x D x H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional: HEPA H13) Filtration efficiency 99 % at ≥ 1–2 µm (F9), optional HEPA 99.95 % at ≥ 0.1 µm Noise level approx. 65 dB (model WS2 similar) Accessories & Features • Compact design for installation directly on or next to CNC machines • Stand for extraction • Three-stage filtration for efficient oil and coolant mist separation • Cartridge filter optionally upgradable with HEPA kit • Easy maintenance, low-noise operation, and durable filter elements Technical data and information subject to change and error. Prior sale reserved!

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm Hsdpsz Nyc Hsfx Apdjw with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, Hydraulic machine vise, high-pressure clamping device RÖHM Type 740 RA 4 Jaw width: 160 mm Jaw height: 75 mm Clamping force: 4 tons Clamping range: 0 to 300 mm Hjdpfx Apoz It Rtsdjw Opening width: max. 305 mm Clamping range: max. 100 mm (per step) Guide rail height: 85 mm - 3 clamping ranges adjustable via locking pins Dimensions L x W x H: 570 x 240 x 165 mm Weight: 60 kg Good condition

Condition: excellent (used), The following HWR components are for sale, among others: Chuck jaws and centering devices Hsdpfx Apsz Ira Todew • 1 INOFlex VL120, 4-jaw manual chuck, Ø 1,150 mm, Art.-No. 846120 • 1 INOFlex VL060, 4-jaw manual chuck, Ø 600 mm, Art.-No. 846060 • 1 INOFlex VF026, self-centering 4-jaw centering device, Ø 260 mm, Art.-No. 842026 INOZet pivoting bridges • 1 set WT063-4-WV25, clamping range Ø 270–630 mm, Art.-No. 750180 • 1 set WT120-4-WV83, clamping range Ø 600–1,200 mm, Art.-No. 750181 • 1 set WT063-4-WV24, clamping range Ø 182–630 mm, Art.-No. 750179 Gripper jaws and adapter jaws • VR16, reversible gripper jaws for VL060/VL070/VL080, Art.-No. 850016 • VP17, soft adapter jaws, Art.-No. 851017 • WR16-8, reversible gripper jaws for INOZet pivoting bridges, Art.-No. 760162 • WP16-8, soft adapter jaws, Art.-No. 770117 • WP25-8, soft adapter jaws, Art.-No. 770126 • VR12, reversible gripper jaws for VF026, Art.-No. 850012 Movable jaws and fixed stops • VCF120, fixed stops, Art.-No. 854016 • VCB120, movable jaws, Art.-No. 854018 • VCF070, fixed stops, Art.-No. 854006 • VCB070, movable jaws, Art.-No. 854007 • VCB026, movable jaws, Art.-No. 854019 • VCF026, fixed stop jaws, Art.-No. 854020 • VCB028, movable jaws, Art.-No. 854029 • VCG026, movable, reversible jaws with gearing, Art.-No. 854033 In addition, various related T- and double T-slot nuts, fastening screws, and other accessories are available. Total net new price: 117,000 EUR Purchases were made in 2021 and 2023. The attached images provide an initial overview of the available components.

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, COMAT 1F14 DQ V1.4 LSX3 OIL FILTRATION SYSTEM TECHNICAL CHARACTERISTICS: Manufacturer: COMAT Model: 1F14 DQ V1.4 LSX3 Year of manufacture: 2011 Type: Cutting oil superfiltration system Fluid: Neat cutting oil Nominal flow rate: 180 [L/min] Filtration rating: 3 to 5 [μm] Filtration surface area: 4.4 [m²] Filtration system: Filtration with filter aid Filter aid: Cellulose / mineral Compressed air pressure: 6 [bar] Power supply: 400 [V] Hodpfx Aoz Hvv Njpdsw Frequency: 50 [Hz] Auxiliary voltage: 24 [V] AC Maximum power: 5 [kW] Weight: 800 [kg] Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: used, Article: clamping tube Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at) or Hsdpfsz Hv D Tsx Apdew *

Condition: used, 3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Hodpfx Asz I A D Nepdow Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

Condition: excellent (used), Manual rotary table Ø 450 mm Total height: 150 mm Base dimensions: Length 580 mm x Depth 500 mm Hodsz I A Inepfx Apdow Weight: approx 150 kg In very good condition

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Hodpfx Aoz I A Nropdew Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: used, Cast iron bed Hedpfxsz I A Tke Apdjw Length: 3650 mm Width: 1370 mm Thickness: 150 mm 11 T-slots - dimensions 32 x 18 mm Slots spacing: 125 mm Assembly in 2 parts Dimensions of each part: L 1820 mm x W 1370 mm x H 150 mm Total height on base 875 mm Weight: approx 4 T

Condition: excellent (used), Year of construction: 2017, operating hours: 500 h, functionality: fully functional, machine/vehicle number: SEOM CAS50, overall weight: 800 kg, chuck outer diameter: 1,250 mm, three-jaw chuck diameter: 1,250 mm, bolt circle diameter: 463 mm, total height: 180 mm, outer diameter: 1,250 mm, cone mount: 520 mm, cone diameter: 520 mm, spindle bore: 520 mm, rotational speed (max.): 500 rpm, Seoam CAS50 Chuck, like new with less than 500 hours of usage. See images (with rust preventative applied). Hsdez Erq Tjpfx Apdew

Year of construction: 2016, condition: used, overall weight: 4,200 kg, total length: 2,900 mm, total width: 3,260 mm, total height: 2,200 mm, workpiece weight (max.): 3,000 kg, FANUC ROBOCUT α-C800iB Wire EDM Machine Technical Specifications: Max. Workpiece Dimensions: 1,250 × 975 × 300 mm Max. Workpiece Weight: 3,000 kg Wire Diameter: 0.10–0.30 mm Max. Taper Angle: ±30° / 150 mm Hsdpfsz N Nuxex Apdsw Max. Wire Spool Weight: 16 kg Travel X-axis: 800 - mm Travel U-axis: 200 - mm Dimensions (LxWxH) approx.: 2900 x 3260 x 2200 mm Component weight max.: 3,000 kg Control: FANUC Series 31i-W Model B Travel Y-axis: 600 - mm Travel V-axis: 200 - mm Weight approx.: 4,200 kg Travel Z-axis: 310 - mm Year of construction: 2,016 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: used, Year of construction: 2010, Clamping tower, manufactured by AMF, with 6 clamping surfaces. Dimensions: 600 mm x 600 mm x 1060 mm Hodpfxscum N Se Apdew Clamping surfaces: 290 mm x 1060 mm (6 sides) Grid pattern of holes, spacing: 50 mm x 50 mm (100 holes per side with threads and clearance holes) Base plate: 760 mm x 735 mm x 50 mm Overall height: 1110 mm 2 units in stock. Price quoted is for 1 unit.

Condition: good (used), Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Hsdpfjfr Ih Dox Apdew Type: PKT 1000 Clamping surface: 1400 mm x 1400 mm Clamping grooves: 7 pieces Slot dimension: 22 H7 mm Slot distance: 160 mm Condition: Very good (used) Optionally with machine bed About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a free specialist for SHW machine tools. Our main focus lies in the field of tool milling machines. Our services include the supply of spare parts, on-site customer service, machine overhauls and control modernization. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - control modernization

Condition: good (used), Clamping plate, welding table, welding table, straightening plate -Clamping plate: solid design, with large vice -Clamping area: 1050 x 1040 mm -Table height: 715 mm -Plate thickness: 180 mm -Total dimensions: 1380/1060/H950 mm -Weight: 1550 kg Hedpfondzxmsx Apdew

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, drawer cabinet -Tool cabinet Schäfer, drawer cabinet sturdy design -1 drawer/ 2 borders: Layout/height see photos Hsdpfeud Utiex Apdew -Cabinet door: lockable -Quantity: 1 piece available -Dimensions: W x H x D 500/500/1000 mm -Weight: 29 kg