Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: Drawer cabinet, sturdy design -12 drawers: See photos for layout/height -lockable: without key Gsdjyq Rzfopfx Ahvsip -Dimensions: WDH 720/730/H1000 mm -Weight: 210 kg

Condition: used, Year of construction: 1991, machine/vehicle number: Typ: 6.42 HS-4.4, bar diameter (min.): 8 mm, bar diameter (max.): 80 mm, input voltage: 220 V, For sale is a used LNS Hydrobar Sprint S2 bar feeder in robust design. Type: 6.42 HS-4.4 Voltage: 380 Serial number: 3791 Control: 220V Year of manufacture: 1991 Was mounted on a TRAUB TX 65 Includes guide tubes and all half shells (see photos) Giedpjytn Uuefx Ahvep Other information: Sale as seen Inspection and collection in Hagen a.T.W. possible by appointment Location: Hagen a.T.W. Sale from company → without guarantee & warranty, subject to errors

Condition: used, Year of construction: 2016, operating hours: 16,859 h, type of input current: three-phase, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS AirTower Filter Ventilation Tower, 5,000 m³/h. Industrial filter ventilation for welding halls — designed for a variety of technological processes in production plants, primarily for metalworking. Top-mounted air intake and draft-free air discharge at floor level — directly to workstations. Layered filter ventilation principle; the unit does not require ductwork installation. Cartridge filter elements — self-cleaning via compressed air pulses during operation. Filter cleaning by differential pressure — no compressed air loss. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air without causing drafts, at a velocity below 1.2 m/s, precisely where workers breathe. Covers a broad 270-degree area. The tower operates on the layered ventilation principle, recommended by trade associations and considered the most effective form of air circulation. Giodpfxeyq Nl No Ahvjp Year of manufacture: 2016 Operating hours: 16,859 h Specifications: - 3.9 kW EC fan - Capacity: 5,000 m³/h - Filter surface area: 80 m² - Filter cartridges: 4 pcs - Additional high-efficiency final filter (F9 filtration class) provides increased air cleaning performance and additional protection for the fan in case of main filter failure. - 100 l dust collection drawer - Very quiet operation: 75 dB(A) - Filtration efficiency: > 99.6% - Stock No.: 1109

Condition: good (used), Clamping angle, clamping aid Gsdpfx Aheyq Nr Njvjip -Clamping angle: for workpiece clamping -Wall thickness: 27 mm -Dimensions: 395/130/H300 mm -Weight: 36.1 kg

Condition: good (used), Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: for machine tools and systems Gijdpofdd Avjfx Ahvsp -Minimum height: 75 mm -Max. height: 95 mm -Price: per piece -Quantity: 4 pieces -Dimensions: 230/180/H80 mm -Weight: 12.3 kg/piece

Condition: good (used), bench vise, locksmith's vise, parallel vise -Jaw width: 150 mm Wingspan: 315 mm -Number: 1x vises available Price: per piece -Dimensions: 570/220/H400 mm Godpfsyq Hkpsx Ahveip -Weight: 52.7 kg

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table -Mounting plate: with support ribs -Clamping surface: 580 x 680 mm -Sheet thickness: 27 mm -Plate: with supporting ribs -Quantity: 1 mounting plate available Price: per piece -Dimensions: 580/680/H90 mm -Weight: 97 kg Gjdpfsyq Hkijx Ahveip

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: Drawer cabinet, sturdy design -11 drawers: See photos for layout/height -lockable: without key -Dimensions: WDH 720/730/H1000 mm Gsdpfxoyqvq Ee Ahvsip -Weight: 206 kg

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: Drawer cabinet, sturdy design -11 drawers: See photos for layout/height Gjdpfx Ahoyqvl Neveip -lockable: without key -Dimensions: WDH 720/730/H1000 mm -Weight: 238 kg

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank Godpex T Ah Djfx Ahvjip - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: used, Article: clamping collets Manufacturer: Different Gisdjn H Nzbspfx Ahvjp For multi spindle automatic lathes, used and new Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Metal cabinet, workshop cabinet, storage cabinet with 2 sliding doors VIDMAR BORIK 2 sliding doors with roller guide 6 rotary drawers Drawer dimensions: Depth = 616/480 mm, Width = 380 mm, Height = 20/45 mm Width: 1440 mm Depth: 490 mm Giedpfeypw Hxsx Ahvep Height: 1000 mm - Rotary drawers height-adjustable in perforated grid - Without key Weight: approx. 150 kg

Condition: used, thickness of jaw 160 mm max. clamping width 302 mm weight ca. 60 kg length in total 770 mm max. clamping force: 8 tonnes max. clamping width/mm: 375 Clamping height: 100mm jaw width: 200mm Gijdpfx Ajypwglehvsp - Without vice spanner - incl. 360° turntable

Condition: used, thickness of jaw 160 mm max. clamping width 302 mm weight ca. 60 kg length in total 770 mm Allmatic 160 hydraulic vice with adjustable clamping pressure Span S1/mm: 0-152 Span S2/mm (can be changed with locking pin): 147-302 Clamping force levels: 4 Max. clamping force in kN: 60 Design: Mechanical min. Clamping width/mm: 0 Workpiece: Pre-machined part Jaw width/mm: 160 Max. clamping width/mm: 302 Max. clamping width: 302mm - incl. 2x clamping claws - Without vice spanner Giodpfx Asypwf Ijhvep

Condition: used, thickness of jaw 160 mm max. clamping width 302 mm weight ca. 60 kg length in total 770 mm Allmatic 160 hydraulic vice with adjustable clamping pressure Span S1/mm: 0-152 Span S2/mm (can be changed with locking pin): 147-302 Clamping force levels: 4 Max. clamping force in kN: 60 Design: Mechanical min. Clamping width/mm: 0 Gedpfx Ahjypwfujvoip Workpiece: Pre-machined part Jaw width/mm: 160 Max. clamping width/mm: 302 Max. clamping width: 302mm - incl. 2x clamping claws - Without vice spanner

Condition: used, thickness of jaw 160 mm max. clamping width 302 mm weight ca. 60 kg length in total 770 mm Allmatic 160 hydraulic vice with adjustable clamping pressure Godpeypwfhofx Ahvjip Span S1/mm: 0-152 Span S2/mm (can be changed with locking pin): 147-302 Clamping force levels: 4 Max. clamping force in kN: 60 Design: Mechanical min. Clamping width/mm: 0 Workpiece: Pre-machined part Jaw width/mm: 160 Max. clamping width/mm: 302 Max. clamping width: 302mm - incl. 2x clamping claws - Without vice spanner

Condition: used, Year of construction: 1990, table length 3000 mm table width 2500 mm Gjdpfx Ahjgrd R Rjveip table height 300 mm weight of the machine ca. 4 t dimensions of the machine ca. 3 x 2 x 0,3 m

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: hard top jaws for wedge bar chucks, helical teeth -Jaw width: 45 mm -Dimensions: see photo technical drawing -Overall dimensions: 167/135/H93 mm Gijdpfxjypvlgs Ahvop -Weight: 10.7 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth Godpfxjypvlas Ahvjip -Jaw width: 45 mm -Dimensions: see photo technical drawing -Overall dimensions: 162/174/H175 mm -Weight: 18.8 kg

Condition: excellent (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth Gsdpfeypvg Djx Ahvoip -Jaw width: 45 mm -Dimensions: see photo technical drawing -Overall dimensions: 180/135/H125 mm -Weight: 19.5 kg

Condition: used, Liquid Cooler, Oil Cooler, Etscheid IK-V7, Used Machine Manufacturer: Etscheid Type: IK-V7 Cooling capacity: 1.8 COP Refrigerant: R134a Electrical data: 400 V; 4.7 kW; 6.5 A Operating pressure: 20 bar Year of manufacture: 2002 Overall dimensions: Length: 900 mm Width: 900 mm Height: 1350 mm Weight: 205 kg Giedpoypuc Rsfx Ahvjp

Condition: good (used), The powered tools listed here with VDI 50 interface are designed for a SAUTER tool changer and are in good condition as well as fully functional. They were previously used on a GILDEMEISTER CTX 600 CNC lathe. 6 x driven tools, straight version, brands NACKE and WTO, VDI 50 for SAUTER-brand tool turret: Item No.: XVI 24275 1 drilling/milling unit, straight version, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, no. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €545.00 plus statutory VAT. Item No.: XVI 24277 1 drilling/milling unit, straight version, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, no. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Giodpfebql S Hjx Ahvjp Price: €400.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling unit, straight version, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling unit, straight version, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling unit, straight version, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling unit, straight version, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), LANG Makro•Grip®, stamping station 41200 / 41350 Overall length: 630 mm Width: 125 mm ----- Condition of the item: The vise originates from a company liquidation. Giedoytd Nnopfx Ahvjp Good used condition.

Condition: good (used), Year of construction: 2010, Hydraulic steady rest for GILDEMEISTER CTX500 Manufacturer: SMW-AUTOBLOK Type: SLU-3 Clamping range: 12 - 152 mm With steady rest holder for GILDEMEISTER CTX 500 Condition is good. Gisdjypmg Iepfx Ahvep Further data see photos and data sheet.

Condition: good (used), Year of construction: 2012, Complete extraction system for DMG DMU 125 P for sale Giodsyplx Aopfx Ahvop