max. bar capacity 32 mm
bar length 3.200 mm
Oeckr
compressed air 6 bar
weight of the machine ca. 0,8 t
0 380 V / 50 Hz
dimensions of the machine ca. 4,0 x 1,0 x 2,0 m
Bar Feeder
IEMCA - Boss 432 32 N
Bar loading magazine for multi spindle automatic lathe, new
Hjpystp
Manufacturer: Giovanni Cucchi
Machine type: Bar loading magazine for multi-spindle
Type: DBM/DBMF
Design: Surface loading magazine or bundle loading magazine
diameter range: 6-67mm
DB-EVO at a glance:
Proven technology - in use for decades
The material feed of this loader generation is carried out by the machine. Bar loaders DBM/DBMF are mounted on rails, so that they can be easily separated from the machine at any time by unl...
Heat output capacity: KW
air volumen: m³/h
weight of the machine ca.: t
control: Siemens
bar material dia.: min: 6 / max: 80 mm
Bar length: 1200 mm
D3xb08ijy
voltage: 400 V / Hz
Dimensions (LxWxH): 2,0 x 1,4 x 1,5 m
weight: ca. 520 kg
The bar feeder is currently in the technical department.
Catalog No. : 5413
Type: SN 542
Producer: FEDEK
Buvq83xy0n
Made in: 2008
Characteristic:
Maximum bar length: 3000 mm
Bar Diameter: 42 mm
Weight: 800 kg
Length: 4000 mm
Width: 1000 mm
Height: 1500 mm
Automatic bar loading magazine for single spindle automatic lathe / short lathe, new
TEST the new DB-EVO bar loader
4 WEEKS, NON-BINDING, FREE OF CHARGE (conditions on request)
very high speeds even with profile material
Manufacturer: Giovanni Cucchi
Machine type: Automatic bar loading magazine for single-spindle / short turning
Type: DB-EVO
Design: Surface loading magazine or bundle loading magazine
diameter range: 20-110mm
DB-EVO at a glance:
Scope of delivery and optionally orderable funct...
max. bar capacity 5 - 100 mm
max. bar length 250 - 1.250 mm
table surface area 650/900 x 1.250 mm
Guide channels 10 / 20 mm
total power requirement 1 kW
Phecz
Barfeeder
BREUNING IRCO - ILS RBK 10016
workpiece length 5000 mm
Jwxbi3
roll diameter 100 mm
work piece width 200 mm
total power requirement 3 kW
weight of the machine ca. 0,3 t
dimensions of the machine ca. 5x0,4x1,5 m
diameter 5- 65 mm
length 1500 mm
Control S7
air pressure - required 6 bar
total power requirement 1 kW
Bp0gswlo
weight of the machine ca. 240 kg
dimensions of the machine ca. 2 x 1 x 1,5 m
Bar loading magazine for multi spindle automatic lathe Schütte SG18, new
Special offer! Save space and loading time!
Manufacturer: Giovanni Cucchi
Machine type: Bar loading magazine for multi-spindle Schütte SG18
Type: DBM
Design: lateral loading magazine / integral loading magazine
Yob: 2021
length of bars: 3000mm
There are 5 pieces available brand new!
Bvtabkq0o2
Please, contact us for getting more information and pictures on mail(at) or
diameter 35 - max. 65 mm
Guide channels 6
Vz9yuowc
control SPS
max. bar length 3.200 mm
bar material dia. min. 35 mm
bar material dia. max. 65 mm
total power requirement 2 kW
weight of the machine ca. 2,0 t
dimensions of the machine ca. 4,0 x 1,1 x 1,6 m
Multi-Channel-Bar-Feeding-System
BREUNING IRCO - 65.6 196.6
- has been installed at a Mori Seiki ZL 200 SMC
MAW Sprint 565 / bar loader,
Pghld
Year of manufacture 2008,
Heavy duty bar feeder for mounting on Mazak QTN 250 II,
length 3m,
centre height 1020 mm,
length of ram 1174 mm,
motor voltage 200,
control voltage 24 Volt,
Bar loading magazine for multi spindle automatic lathe, new
Manufacturer: Giovanni Cucchi
Machine type: Bar loading magazine for multi-spindle
Type: CMSP/CMSPF
Design: Side loader as surface loading magazine or bundle loading magazine
CMSP / CMSPF at a glance:
Proven technology - in use for decades
The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any ...
max. bar length max. 3.200 mm
bar material dia. 5 - 70 mm
change time ca. 30 sec
Loading Length 3.250 mm
rapid traverse 30 (70) m/min
dimensions of the machine ca. 5,0 x 1,5 x 2,0 m
weight ca. 1,5 t
total power requirement 2 kW
Single-Channel bar loading magazine
Yr0xjo
BREUNING IRCO - SiMag 70.1 R
- incl. misc. feed-channels 13, (23), 33mm
We sell here our bar feeder KUPA LM 92 pro.
Operating instructions unfortunately not available.
Was attached to a Gildemeister CTX 400 E. Circuit diagram available.
Space requirement B2,2m x D 1,1m x H 1,4m
Inspection in 49733 Haren possible.
F0esl2q
-Machined bar diameter Min. Ø 3 mm - Max. Ø 22 mm
- Supply voltage 230 V 50 Hz Three-phase
- Feeding speed 0-2000 mm / sec. 0-78,74"/sec.
- Guide channel lubricant ISO VG 68
Ihzaku3fk
- Compressed air required 8 bar
- Weight 800 kg
- Maximum rod length 3200 mm - 4100 mm
Short bar loader LNS Quickload
Warehouse number: 007
Delivery time: immediately
Zsea0f9f
LxWxH: about 2700x1800x1700
Weight: about 500kg
Control: via CNC machine
Rod diameter: about 8-80mm
Rod length: approx. 150-1525mm
Max. Bar weight: about 100kg
Max. Feed path: about 1400mm
Equipment:
- Support bracket
- Operating manual
Price and further technical data on request
max. bar capacity 32 mm
bar length 3.200 mm
compressed air 6 bar
weight of the machine ca. 0,9 t
0 380 V / 50 Hz
dimensions of the machine ca. 4,0 x 1,0 x 2,0 m
Bly7mjpdoo
Bar Feeder
IEMCA - Boss 332-E 32 N
Barfeeder
Capacity and type of bars
Round bars 8 - 65 mm
Hexagonal bars 7 - 55 mm
Length of bars max. 2100 mm
Xnm7tjs
Machine has been used behind Dosan TT 1800 SY with Fanuc 31i- Model A
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview of our stock.
ILS IRCO Breuning barfeeder offered.
Type: RBK 10012
Power: 400 V
Remote control: Esitron HBG 10
Fb90m2p
Year of built: 2007
Included documentation and software
Dimensions: 200x100x140 cm LxWxH
For more information call us or send an e-mail.
Model: STAMAG Type A
feed speed: 100 / 200 / 400 / 800 mm/s
capacity: 200 mm corresponds to 20 bars of 10 mm diameter each
Accessories: Operating instructions
weight:
Dimensions: 450 x 400 x 1,200 mm
Hsj9fbh3a
Material diameter: 25 to 100 mm
Bfsjydcs
Material length: 3 000 mm
Spindle height: 1228 mm
connected power: 2 KW
weight 1300 kg
3 guide channels available (diameter 52 / 72 / 102 mm)
Specifications
Processable bar diameters
Min. Ø 10 mm - Max. Ø 61 mm
Supply voltage
230 V trifase 50/60 Hz three phase
Buadw8f3xd
Feed speed
0 - 627 mm/sec. 0 - 24,70"/sec.
Lubricating oil for guide channels
ISO VG 100
Required compressed air
8 bar
Weight
1.000 kg
Bar length
2 m
ILS IRCO Breuning barfeeder offered.
Type: RBK 10012
Bth2x8gn9m
Power: 400 V
Remote control: Esitron HBG 10
Year of built: 2014
Included documentation and software
Dimensions: 200x100x140 cm LxWxH
For more information call us or send an e-mail.
bar Ø: 5 - 100 mm
bar length: 150 - 1600 mm
(depends on spindle length)
servo drive
double feed system
Bn3maeayjs
autom. adjustment of guid channel
autom. adjustment of bar separation
mobile control panel
loading area: 650 mm x 1650 mm
Only use for one short job!
FMB 10-65 Turbo barfeeder from 1998. Machine is in good working condition.
Complete with
- Conversion kit of 25mm (new in 11/2010)
Bs9a9cbior
- Conversion kit of 42mm (new in 04/2011)
- Conversion kit of 65mm
- Several (new and used) collets.
- Books and documentation
1 x loading magazine
Iemca
Mvijjo
AS 325/32 CT
year of manufacture: 1990
bar machining D: 3 - 25 mm
bar length : 3.200 mm
built in channel : 25 mm
formerly mounted cam lathe
Traub A 25
The loading magazine can be inspected at any time at our warehouse in Reichenbach.
- max. bar length: 3.200 mm
Br8ywymuo2
- guide channel: Ø 22 + 11 mm
- was installed at TRAUB A 25
- storage capacity 300 mm (e.g. 30 bars x 10 mm)
- min. length of bar: 1000 mm
- bar changeover time: ca. 25 sek.
- weight: ca. 750 kg
- dimensions LxWxH: 4500 x 460 x 1500 mm
Breuning IRCO 65.8270.8R
Multi-channel bar feeder
max. bar length: 3000 mm
bar diameter: 5 - 65 mm
guide channels: 8 pieces
Ø 25 , 32 , 38 , 42 , 50 , 56 , 60 , 65
Garwels machines and service
The right choice
We would be pleased to make you an offer for our additional services
- Transport of the machine
- Assembly of the machine
- Commissioning of the machine
B9to7s7
- instruction
We are exactly the right contact for
- repair
- maintenance
- service
Our team is ready for you.
Please also visit ...
Short bar loader IRCO ILS-RBK 7212 27-03-008
Delivery time: immediately
Number: 27-03-008
Machine data
Year of construction: approx. 1999
L x W x H: approx. 2500 x 1070 x 1700 mm
Weight: approx. 450 kg
Very good general condition
Technical specifications
Control: via CNC machine
Rods - diameter: approx. Ø 5 - 70 mm
Rod length: approx. 600 - 1200 mm
Power supply: approx. 380 & 230 volts
Equipment:
Bsdwjkdl9t
-Material - support bracket
Further accessories on request
Price and furthe...
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.