Clamping angle for workpiece clamping
-Dimensions: 151/391/H191 mm
-Thickness: 18 mm
Vttxtmbjz
-Surface: milled
-Weight: 16 kg
length: 250 mm
width: 400 mm
height: 305 mm
weight: je ca. 56kg
dimension L-W-H: 250 x 400 x 305 mm
Bbzeauska9
- clamping surface vertical = H: 305mm x W: 400mm
- clamping surface foot L: 250mm x W: 400mm
- T-slots according to DIN 650: a = 18.0mm; h = 30.0mm; c = 11.5 mm; with 2x horizontal and 4x vertical; center distance Horizontal slot = 152mm and vertical slot 90mm
- clamping area of the foot: L: 250mm x W: 400mm
length 250 mm
Cgo80imo
width 170 mm
height 250 mm
groove width 18 mm
weight of the machine ca. 29 kg
dimensions of the machine ca. 250 x 170 x 250 mm
length 995 mm
width 500 mm
Bt8t2m2m0q
height 30 mm
weight of the machine ca. ca. 300 kg
Angle table with hole ratchet
Table LxWxD: 995x500x30 mm
Fixing LxW: 430x500 mm
Weight: 300 kg
Clamping bracket 320 mm x 320 mm x 220 mm
Uw9odrq
Clamping angle
Foot
Length: 1.000 mm
Width: 800 mm
Clamping surface
width: 1.000 mm
Height: 1.500 mm
with mounted clamping device (see pictures)
3D data are available
Bupugsanrb
used
weight approx.: 1,2 t
ex works Kempten
further clamping devices of different sizes in stock
Clamping angle for workpiece clamping
-Dimensions: 202/151/H99 mm
-Thickness: 15 mm
Xtfa78zmm
-Groove: 15 mm
-Surface: milled
-Weight: 4.7 kg
length:3000 mm
width:1500 mm
size clamping area:3.000 x 1.500 mm
size base area:1.500 x 1.200 mm
weight of the machine ca.:6210 kg
Becwzu9c
The STOLLE clamping angles are manufactured in a stable,
box-shaped cast construction
made of dense special cast iron with steel addition.
The outer surfaces are machined according to DIN 876/III,
the edges are angular to it.
The clamping surface contains 14 T-slots according to DIN 650-28H12
at intervals of 200 mm as well as additional 660 threaded holes M...
width 1150 mm
height 2150 mm
depth 850 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Bkpnyzb82x
length 1000 mm
width 800 mm
height 630 mm
weight 460 kg
T-slot - width 50 mm
Clamping table, clamping plate, T-slot table
Dimensions
Table length: 1000 mm
Table width: 800 mm
Table height: 630 mm
T-slot length: 50 mm Weight: 460 kg
Bt8xan0abd
length 1200 mm
width 900 mm
height 1500 mm
weight of the machine ca. 1 t
Cmbhc32e
Machine dealer with own stock of 2500 m².
length: 655 mm
width: 800 mm
height: 1000 mm
depth: Tiefe/Länge: 655 mm
weight of the machine approx.: 641 kg
Clamping surface is rough-machined
good used condition, slight signs of use
Bewiezzeuu
- T-slots according to DIN 650:
- a=28; h=50; b=50; c=21 mm
- centre distance = 160mm
Clamping surface of the foot: depth: 655mm x width: 800mm
Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube
-for: scribing plate, clamping plate, ...
-Number: 2x prisms
B3sxaabj
-Price: complete
-2x dimensions: 100/68/H89 mm
-Weight: 8.4 kg
length - 800 mm
breadth-base - 400 mm
Yxcrbvwzp
height - 700 mm
welded assembly
weight approx. 90 kg
width 1300 mm
height 2500 mm
I9n299u
depth 1300 mm
thickness of clamping plate 50 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
length 800 mm
S8nnwh
width 800 mm
height 1000 mm
weight 0,2 kg
taper MK 0
Benjgnfgvz
length: 1800 mm
width: 2000 mm
height: 3000 mm
depth: Länge/Tiefe 1800 mm
weight: ca. 10,3 t
There is still 1 piece of angle plate available for sale. All others are sold.
Steel construction, welded, surface finished.
Size of the angle: W: 2000 x D: 1800 x H: 3000mm
Cojtclh7m
Clamping surface vertical: H:3000xB:2000mm
Holes on/in clamping surface 400 x 50 and 200 x 53mm, with M30 threaded holes and through holes
Clamping surface base stand: W:2000 x D:1800mm
Clamping hole Ø 51mm drilled in co...
Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube
-for: scribing plate, clamping plate, ...
B7ejvcgu
-Number: 5x prisms
-Price: complete
-2x dimensions: 148/60/H60 mm
-2x dimensions: 115/62/H38 mm
-1x dimensions: 104/60/H29 mm
-Weight: 13.2 kg
length - 590 mm
breadth-base - 400 mm
height - 485 mm
Gracj0bfo
weight approx. 104 kg
width 1300 mm
depth 1300 mm
height 2500 mm
thickness of clamping plate 50 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Oog7d
depth 1100 mm
height 5200 mm
length 1100 mm
weight 7120 kg
Bt8vz9skjc
length 800 mm
Nlpoh
width 450 mm
height 800 mm
total power requirement kW
weight of the machine ca. 0,5 t
dimensions of the machine ca. m
length: 1050 mm
width: 1200 mm
height: 1600 mm
depth: Länge/Tiefe: 1050 mm
weight of the machine approx.: 2483 kg
Bbsgijzu
- vertical clamping surface: height: 1600mm; width: 1200mm
- clamping surface is smoothed
- 8x T-slots according to DIN 650:
- a=36; h=61; b=61; c=26 mm
- base clamping surface: depth: 1020mm; width: 1250mm
Clamping angle for workpiece clamping, eccentric press
-The clamping angle comes from: an eccentric press
-Manufacturer Heilbonn Type: REPV60
-Clamping surface: 600 x 720 mm
-Plate thickness: 75 mm
V3bahog7
-Groove: mm
-Surface: milled
-Dimensions: 735/900/H545 mm
-Weight: 532 kg
height 4,000 mm
width 1,010 mm
Cpdraff8
depth 1,200 mm
framing thickness 90 mm
weight approx. 5,500 kg
width 1500 mm
height 1480 mm
depth 800 mm
total power requirement kW
2kgdifdj
weight of the machine ca. t
dimensions of the machine ca. m
length 800 mm
width 500 mm
height 1000 mm
Biugubaa3v
power capacity kW
weight of the machine ca. 0,3 t
dimensions of the machine ca. m
2 units
length 605 mm
width 1350 mm
height 2510 mm
weight 1,9 t
B8fnstut
Two heavy mounting brackets photographed lying down,one bracket has three
grooves on the long leg, the holes are through holes.
Machine dealer with own stock of 2500 m².
length: 640 mm
width: 800 mm
height: 1000 mm
depth: Tiefe/Länge: 640 mm
weight of the machine approx.: 570 kg
Bs0ikyk3km
Clamping surface is rough-machined
good used condition, slight signs of use
- T-slots according to DIN 650:
- a=28; h=50; b=50; c=21 mm
- centre distance = 160mm
Clamping surface of the foot: depth: 655mm x width: 800mm
Clamping angle for workpiece clamping, measuring device, for vice
2k0e3yuaz
-Hole circle: 140 mm
-Shaft: Ø 30 mm
-Groove: mm
-Surface: milled
-Dimensions: 182/195/H180 mm
-Weight: 8 kg
length 690 mm
thread M16
height 1020 mm
weight of the machine ca. 360 kg
Bt8uek8vto
Angle table with breadboard table LxWxD: 1020x690x40 mm
Fixing LxW: 330x690 mm
Thread: M16
Weight: 360 kg
width 1500 mm
height 1500 mm
depth 800 mm
Thickness 58 mm
Brhjnhh377
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
width 550 mm x height 750 mm
depth 500 mm
T - slots width 20 mm
Zabqxu3
wall thickness 60 / 35 mm
weight approx. 235 kg
length 1050 mm
width 500 mm
height 1000 mm
weight of the machine ca. 600 kg
Bq0k8tb7xh
2 pieces available, the price is for one piece.
Machine dealer with own stock of 2500 m².
Large cast iron angle plates
4 - 830 x 1760 x 4550(h) mm
8m3cthq
2 - 785 x 2160 x 3650(h) mm
2 - 780 x 2150 x 3670(h) mm
2 - 785 x 1550 x 2450(h) mm
2 - 920 x 1055 x 1865(h) mm
1 - 1020 x 1760 x 3560(h) mm
Positioning ring, clamping ring, clamping pallet, short taper, shuttle table
-Type: SRB 120
-for: NSA plus tensioning station
-both sides: ground
-Clamping rings: with ground short taper for a positive connection of the clamping pallets or devices with the clamping modules.
-Form-fit connection: between clamping pallet and NSA plus clamping station.
-Number: 25x available
-Price: per piece
-Dimensions: Ø 118/H19 mm
-Weight: 0.8 kg
D0jmis8re
used T-slot clamping angle
technical data:
Dimensions approx. 1600 x 1250 mm
with
- 8 horizontal T-slots
Xnm8qtc
used, in good condition
2 pieces available
for sale individually or as a pair
width 300 mm
height 1200 mm
depth 510 mm
total power requirement kW
weight of the machine ca. t
Brhjp7cpsg
dimensions of the machine ca. m
There are 2 pieces Width: 300 mm Height: 1200 mm Depth: 510 mm
About usmore than 500 machines in the warehouse over 8500 m² storage area,
crane capacity 70 tmore than 1000 items accessories for your workshop You want
to sell machines production lines or your company, then talk to us.
width 295 mm x height 950 mm
depth 510 mm
T-slots width 21 mm
wall thickness 90 / 55 mm
weight approx. 345 kg
Oodyz
Number of T slots: 22
Jump from T to T: 125mm
T size: 22mm
Number of matching pieces:4
Length: 1.000 mm
Width: 800 mm
Height: 2.800 mm
Bhgp3zqgus
Weight: 1.400 kg
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise ...
Dimensions of the big face : 1600 x 1300 x 45
Dimensions of the small face : 1240 x 800 x 45
Thread : M16
Beyb0fjywe
Ring for lifting
Weight : 1 200 kg
Also available clamping plate :
6500 x 2000 * 5300 x 1620 * 2960 x 1050
2500 x 2500 * 2200 x 2000 * 1800 x 610
1480 x 1050 * 1490 x 730 * 1630 x 460 * 1100 x 750
Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube
-for: scribing plate, clamping plate, alignment bench ...
-Number: 4x prisms
Ps8tp3
-Price: complete
-4x dimensions: 170/85/H240 mm
-Weight: 42 kg
used T-slot clamping angle
technical data:
Dimensions
height 1120 mm
width 320 mm
with
Bvhjuznggt
- 7 horizontal T-slots
4 pieces available
used, in good condition
width 1200 mm
height 1100 mm
Vtz00a
depth 650 mm
Thickness 65 mm
T-slot - width 28/50 mm
T-slot - distance 120 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
T-slot width 22/38 mm
Slot holder: 198 x 29 mm
Delivery as shown
Width: 1500 mm
Height: 890 mm
Depth: 1250 mm
O7x8x
Weight: approx. 1600 kg
Two pieces of precision cast clamping angle for milling workpieces
Clamping surfaces: 1000x1000/ 1000x800
Bspmm7dxo7
clamping angles 1300x1200
Vgtte2kb
Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube
-for: scribing plate, clamping plate, alignment bench ...
-Number: 1x prism
7bravs3lx
-Price: complete
-Dimensions: 210/85/H226 mm
-Weight: 14 kg
usedT-slot clamping angle
technical data:
Dimensions approx. 1600 x 1250 mm
with
- 8 horizontal T-slots
used, in good condition
Wjurnpk
2 pieces available
for sale individually or as a pair
Used Angular clamping device
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Photo gallery: The World's 10 biggest excavators
Olympic Games: Machineseeker sponsors Team Germany
Morlock Motors official partner of Machineseeker and Truckscout24
Sell now on Machineseeker! Over 220,000 inquiries per month
Sample sales contract for used machines in nine languages
