Condition: like new (used), Used Zetterstrom 912 litre capacity 316L stainless steel vertical reactor. Unit has welded dished top and bottom heads. Internal rated 6 bar design pressure at -35 to 180 deg.c. External stainless steel jacket rated 6 bar/full vacuum design pressure at 180 deg.c. Unit has top entry 3-tier stainless steel agitator direct diven by 4 kw 220/380 volt 3/50 1440 rpm motor via Lightnin model LS400 gearbox. Also includes (3) baffles. Unit is mounted on side supports. Unit requires a mechanical seal and backing plate. Dueb Hlrtjgfb Rgocot Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: new, Year of construction: 2024, Extremely strong industrial magnet for iron separation Special price 970 € net (shipping 14,90 € net) *the lengths can be seen in picture 2 The active side has a stainless steel end plate (material 1.4301). There are threaded holes on the back for mounting *handle available on request The block magnet systems can be used up to a maximum operating temperature of + 100 °C. The magnet surface should be regularly cleaned of any trapped iron parts. Starting heights for all types e.g. For a steel nut M5 approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Dusb Hlrstqfhxotcot Mounted above a conveyor belt, the iron parts "jump to the holding surface of the magnet". Installation example 2: Mounted in a piping system with direct contact to the material flow. For a high level of separation safety, it is possible to install several block magnets in a cascade, one behind the other. Installation and safety instructions: When handling, unpacking and then installing, make sure that there are no loose iron parts such as tools or screws in the vicinity. The magnetic attraction is so strong that painful injuries can occur if fingers come between iron parts and the active surface. There should be no steel parts within a minimum distance of 400 mm below the active surface.

Condition: excellent (used), Year of construction: 2011, CNC Lathe NEF 400 2011 With driven tools Technical specifications: Turning diameter 350 mm Turning length 650 mm Swing diameter over bed 385 mm Swing diameter over cross slide 350 mm Distance spindle nose to tailstock 902.5 mm Coc Eg S Rrsv Umldegerb Main spindle: Speed range - main spindle 0 - 4,000 rpm Drive power - main spindle 15.3 / 11.5 kW Max. torque 430 Nm Spindle diameter in front Bearing 100 mm Spindle bore 87 mm Max. bar diameter 52 mm Usable bar diameter 52 (45) mm Max. chuck diameter 250 mm Chuck diameter 165 mm Spindle head 170 h5 C-axis 0.04 ° Tool turret: Number of tool positions: 12 positions Shaft diameter DIN 69880: 30 mm Driven tool stations: Number of driven tool stations: 6 positions Speed range - driven tool stations max. 4,500 rpm Drive power of driven tool stations: 5.5 kW Travels: X-axis 255 mm Deb Hewhxkdelrtceut Z-axis 800 mm Tailstock: Tailstock travel 680 mm Tailstock mount MT 4 Clamping pressure 6.8 kN

Condition: new, Year of construction: 2019, operating hours: 135 h, System consisting of: 1 Qirox QRC 410 welding robot including QC2 adv. controller, handheld programming unit, 24 V buffering, PC connection on the cabinet side, 2 GB flash drive Dueb Hlrjwhxiaotcjt Gas nozzle sensor, arc seam detection, multi-layer technology, spot editor, QTI, QWP Qineo Puls 600 with master control module, wire feeder, torch hose package, MRW 510 evo welding torch, torch test gauge, mechanical cleaning, pressure booster, 20 kN floor track, 12 m travel distance Connection control, 1 light barrier, 1 start pre-selector Delivery date: from stock. Subject to prior sale. Robot is mounted on a C-stand in a suspended position. System can be converted to 2 workstations and supplemented with manipulators available in stock.

Condition: excellent (used), Year of construction: 2016, 1 used rapid steam generator ----- Manufacturer: CERTUSS Dusb Hlrtswhxh Aocjt Type: Universal TC Capacity: 700 kg/h Maximum heat output: 459 kW Operating pressure: 10 bar Water capacity: 103.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2016 Equipped with a Certuss gas burner, gas control system, control cabinet with touch control, mounted on the boiler body, and the existing coarse and fine fittings

Condition: used, Year of construction: 2024, EMCLAB EMC-11S-UV spectrophotometer, built in 2024, from a food laboratory Note: This is a starting price. The sale will be conducted in an online auction with the highest bidder (plus buyer's premium and VAT). Please follow the link for more photos and information. Dsb Howhw T Dolrtcout

Condition: like new (used), Used APV approximately 50.4 square meter stainless steel shell and tube bundle heat exchanger. Has (328) 16mm diameter X 3060mm long stainless steel tubes rated 3 bar pressure. Stainless steel shell measures approximately 700mm diameter X 3060mm long rated 1.5 bar pressure. Bolted stainless steel heads. Dob Hlog Sr S Rertcout Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: used, total height: 1,400 mm, total length: 600 mm, total width: 600 mm, outer dimension length: 600 mm, Empty weight: 200 kg - Documentation available: No - Grinding diameter: 32mm - Transport dimensions: 600mm x 600mm x 1400mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Financial information Djb Hlrtjwhxfnjceut VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 2600-107872, overall weight: 1,000 kg, load capacity: 12 kg, controller manufacturer: ABB, controller model: IRC5 Single, input voltage: 400 V, input current: 9 A, ABB IRB 2600 industrial robot incl. control cabinet & control panel, Duobeucxx Hj Hlrtcet IRB 2600-12 / 1.85 Year of construction 03.2017. Axes: 6, Load capacity: 12 kg. Total weight: 1,000 kg (850 kg robot arm incl. base + 150 kg control cabinet). Control cabinet: ABB IRC5 Single. Used, complete, very good condition, tested and can be demonstrated. (For further details see type plates). We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.

Condition: excellent (used), Year of construction: 2020, operating hours: 2,100 h, Functionality: fully functional, Complete ABB welding robot system, built in 2020, only 2084 operating hours 1 robot type ABB IRB 2600 ID-8/2.00 with IRC 5 controller automatic TCP control, torch cleaning, wire cutting device Dusb Hsvz Tthjlrtcot Working area, reach: 2000 mm Manipulator IRBPK 600 Manipulator load capacity per side: 600 kg Turning radius: 700 mm Faceplate distance: 2500 mm Hollow shaft for compressed air feedthrough Welding equipment: Fronius TPS 500i, CMT, PMC, LSC Fronius Wire-Switch wire change system (automatic switching between two wire qualities) Complete safety equipment, 1 light grid and starter box, partition walls 2 clamping devices and robot platform including stairs Aigner Airjet welding fume extraction system including HEPA filter, summer/winter switchover, including piping and exhaust nozzle Available from March 2025. The special price applies if the system is dismantled by the end of April 2025. Regular maintenance by ABB Austria. Disassembly by ABB Austria is available upon request. (Not included in the price)

Condition: excellent (used), Year of construction: 1996, operating pressure: 10 bar, 2 used steam boilers ----- - mounted on a skid - Manufacturer: LOOS, Gunzenhausen Type: U-HD Heating surface approx.: 14 sq m Capacity: 800 kg/h Permissible operating pressure: 10.0 bar Increased test pressure: 18.0 bar Water capacity at low water level approx.: 748 l Djbewhxhve Hlrtceut Water capacity when full approx.: 1,108 l Year of construction: 1996 Equipped with a Weishaupt GL3/1-E oil burner, ZMD, 90-630 kW, gas control line, feedwater pump, control cabinet and the existing coarse and fine fittings.

Condition: used, Year of construction: 2009, Functionality: fully functional, Travels: X = 600 mm, Y = 400 mm, Z = 450 mm; Dsb Hlrtswhxd Dscsut Max. workpiece dimensions (L x W x H): 1200 x 850 x 400 mm Max. workpiece weight: 1600 kg Max. electrode weight: 100 kg Min./Max. distance between table and quill: 150-600 mm Quill with Mecatool automatic chuck Including C-axis for rotation, indexing, and erosion Max. electrode weight: 100 kg ISOPULSE generator with 64 amps 12" touchscreen with keyboard and handheld control panel Machine weight (net): 4400 kg Machine dimensions (L x W x H): 2750 x 3150 x 3000 mm The machine is in very good condition, is powered on, and can be tested at any time.

Condition: like new (used), Used Netzsch model LMZ2 stainless steel bead mill with associated parts. Unit has stainless steel peg style rotor and stainless steel jacketed chamber. Approximately 2 litre capacity. Dusb Hlrjhpciajtcet Unit includes feed pump and control panel. All mounted on stainless steel base. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: used, Year of construction: 2007, total height: 1,000 mm, total length: 1,400 mm, total width: 1,300 mm, outer dimension length: 1,400 mm, outer dimension width: 1,300 mm, Empty weight: 300 kg Max. workpiece: 80mm Debswhxfhs Hlrtceut Sleeve-diameter: 250mm Input-height: 860mm Output-height: 830mm - Year: 2007 - Documentation available: No - CE mark available: Yes - Serial number: 40080/70 - Control: Conventional - Motor power: 0.8kW - Transport dimensions: 1400mm x 1300mm x 1000mm (l x w x h) - Transport weight [kg]: 300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: good (used), Year of construction: 1984, CNC Optical Profile Grinding Machine Djbop R Rm Ij Hlrtcsut Wasino GLS-130AS 1984

Condition: good (used), Year of construction: 2007, Functionality: fully functional, 5-Axis CNC Machining Center CHIRON - FZ 15 S High Speed Year of Manufacture 2007 FANUC Series 18i Control Technical Details X-Travel 550 mm Y-Travel 400 mm Z-Travel 425 mm Main Spindle: Speed Range 20 - 12,000 rpm Main Spindle Drive Power 7.5 / 22 kW Duobewhxc Ts Hlrtcjt Max. Torque 140 Nm Tool Holder HSK 63 A Fixed Table: Table Clamping Area 1,050 x 450 mm Max. Table Load 500 kg T-Slots 2 x 18 H12, 1 x 18 H8 NC Rotary Table: Table Clamping Area 610 x 240 mm Center Height 165 mm Faceplate Diameter 160 mm Bore 4x M10 Tool changer: Number of tool positions: 20 Max. tool diameter: 65 mm Max. tool diameter with free adjacent tool box: 175 mm Max. tool weight: 2.5 kg Chip-to-chip change time: 2.1 sec Tool-to-tool change time: 0.9 sec Feed rates: Rapid traverse (X / Y / Z) 60 m/min Acceleration: 1 g Drilling capacity in St 60 - solid drilling: 36 mm Tapping M 24 Material removal rate: 300 cm³/min Total power requirement: 18 kVA Machine weight: approx. 7.0 t Space requirement: approx. 4.5 x 2.5 x 3.2 m

Condition: good (used), Year of construction: 1980, Functionality: fully functional, Machine type: Guillotine shear Manufacturer: RAS Model: 53.80 Year of manufacture: 1980 Condition: Good Type of offer: Used machine Technical specifications: Capacity: 3060 x 1.5 mm Drive type: Electric/mechanical Duob Hljwhxcmjrtcot Drive: 5.5 kW Note: Front material supports with side stop Weight: 1940 kg The machine is in good, ready-to-use condition and can be inspected and demonstrated at our premises. We would be pleased if you are interested in our offer. Subject to errors, changes, and prior sale.

Condition: new, Cooking kneading kettle S 300L Ital Form Dsb Hlrtowhw Hwjcout Volume: 300 liters Stainless steel Dimensions: 160x130x125cm

Condition: refurbished (used), Used Refurbished Giusti model Pharmix 120 litre capacity 316 stainless steel jacketed process vessel. Internal approximately 510mm diameter X 585mm straight side. Has clamped dished top and welded dished bottom heads. Internal rated full vacuum/1.38 bar working pressure. Has 321 stainless steel external jacket rated 3.45 bar working pressure. Dueb Hlrsgcb A Eetcet Vertical agitator with PTFE wall scraper blades direct driven by 1.1 kW, 415 volt, 3/50, 1420 rpm motor via Supaflex enclosed VS drive rated 600-3000 rpm motor and Electro power gears type ESRV2 gearbox rated 34.1 reduction ratio. Bottom entry homogeniser direct driven by a pole changing 2 speed 3.7/4.4 kW, 400 volt, 3/50, 1425/2890 rpm motor. Mounted in stand with hand hydraulic lift for raise and lower of top dished head. Has approximately 38mm (1.5") centre bottom discharge with valve. Designed for producing liquids, creams and semi solids under sterile conditions. This unit has recently been refurbished and is immediately available for sale. Here at Perry Process Equipment Ltd our engineering workshop aids us in being a premium supplier of high quality used process equipment. We can carry out a range of services from basic equipment testing right up to mechanical refurbishment, for a broad range of industries. Contact us for further details about the refurbishment work carried out on this unit and to request a free no-obligation quotation. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: used, Year of construction: 2018, Overview  This fill level and closure inspection machine was manufactured in 2010 by German company KHS. The operation view will be done with the label inspection machine from Indspect. It is designed for checking the fill height, closure and label of full bottles. The machine was running until January 2025 and is now stored in the company. Technical data Capacity: up to 25,000 bph Scope of Delivery  Fill level and closure inspection system | KHS Label inspection system | Indspect Duob Hlrjwhw Sgjtcjt

Condition: like new (used), Used Sinclair Stainless Fabrications approximately 15,000 litre 316 stainless steel vertical reactor. Unit measures approximately 2,300mm diameter x 3,540mm straight side. Has welded dished top and bottom heads. Internal rated 3.6 bar/full vacuum design pressure at 165 deg.c. Dsb Hlegwbbfsrtcout Has external stainless steel limpet coil jacket rated 5.5 bar design pressure at 165 deg.c. Unit has top mounted stainless steel agitator with 2-tier 4-blade turbine blades. Driven by 45kw motor/gearbox with new double mechanical seal. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: like new (used), Used Wefco approximately 55,000 litre 304 stainless steel vertical mixing tank. Unit measures approximately 3400mm diameter x 6100mm straight side. Top entry agitator driven by a 5.5kw 1455rpm 3/50 motor via a gearbox. Has welded flat top and dished bottom heads. Dobjgf A Txe Hlrtcjut Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: used, Used STEPHAN stainless steel cutter. - Type UMM/SK40E PILOTE - No. 4418598-Stainless steel tilting vessel double jacket Deb Hlrtjrdg Taecjut - Motor : Hp 10 - Rpm 1500/3000 - 380 volts - Electric control panel - scraper with motor

Condition: used, Used WINKWORTH stainless steel double jacket high speed mixer. Dujb Hjrdg S Delrtcst - Type RT80 - Total capacity : 120 litre-Useful capacity : 80 litre - Stainless steel double jacket - Shaft equipped with 4 mixing blades - Motor variator : 7.5 kw – Hp 10 – Rpm 30/150 - 380 volts - Stainless steel chopper : motor control: 5.7/4.7 kw – Hp 7.7/6.3 / Rpm 3000/1500 – 380 volts - 2000 watt hot water heating skid

Condition: like new (used), Used Lödige model FKM 2000D stainless steel ploughshare mixer. Approximately 2,000 litre total capacity and 800-1400 litre working capacity. Mixing chamber has carbon steel jacket. Ploughshare mixing blades driven by 55kw, 2960rpm, 3/50 motor via a gearbox. Has provision for choppers but none currently fitted. Has (2) side inspection doors and (2) bottom discharge outlets. Duob Hlrtegd Dr Rscjt Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.