Overband magnet Block magnet Magnetic plate

mütek Hawk-Eye

Condition: new, Year of construction: 2025, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener Fpedpfxjchuvrs Afnjb +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: excellent (used), Year of construction: 2020, operating hours: 1,800 h, overall weight: 3,000 kg, rotor diameter: 360 mm, rotor length: 1,000 mm, power: 45 kW (61.18 HP), Shredder ideal for pallet shredding, with incline conveyor and magnetic roller for nail separation. Also suitable for plastics due to the powerful 45 kW motor. Equipped with hydraulic pusher. Rotor width: 1000 mm. Rotor diameter: 360 mm. Motor: 45 kW. 56 knives on the rotor. New price was €80,000! Fpedpow Td S Njfx Afneb

Year of construction: 2025, condition: new, *Only the neodymium overbelt magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets. Extremely high degree of separation, depending on the bulk height and the starting material. Probably the most compact overband magnet on the market. The competition often uses the less powerful ferrite magnets to save costs. dimensions approx. Length: 104cm Width: 22cm Height: 28 cm (at the motor) *Without controller Surcharge for simple manual start/stop control + 495 € A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm * So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic. This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site Ideal for separating nails from wood chips. Optionally also in a single-shaft shredder that is sucked off Requirements: *Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm *Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm. ----- Optional at extra charge: Fpjdodubpuspfx Afnsb Cross and ascending belt demonstrators from € 7,995 net

Condition: used, functionality: fully functional, load capacity: 18,000 kg, lifting height: 11,900 mm, fuel type: electric, mast type: telescopic, construction height: 1,990 mm, empty load weight: 21,650 kg, total length: 5,540 mm, drive type: Elektro, construction width: 2,000 mm, Pick & Carry Crane Mast type: Telescopic Fpjdpfx Aot Dd Uwefnsb Technical condition: good Front tires type: Non Marking Rear tires Type: Non Marking Remote control

Year of construction: 2019, condition: refurbished (used), Overband plate magnet Version in VA 1.4301 tightly welded 420 x 250 x 100mm completely welded housing Ring eyelets for suspension Fedpfxod Dzaho Afnepb

Condition: new, Year of construction: 2024, MONOBLADE EDGER Fpedpfx Asfw Nv Rsfnob lenht of cut from 4,2 to 8,2 mt max depth of cut 160 mm parallel guide hopper

Year of construction: 1979, condition: ready for operation (used), A Gebr. Pfeiffer ball mill is available. Drive power: 330kW, diameter: 2400mm, length: 5000mm, number of motors: 2, motor weight: 180kg, flywheel width: 3.2mm. On-site inspection is possible. Fpsdpfxev Dwirj Afneb

Condition: good (used), Year of construction: 1992, functionality: unexamined, overall weight: 18,000 kg, power: 250 kW (339.91 HP), For bulky waste, pallets, residual wood, etc. Single-shaft shredder with electrohydraulic drive Fjdeq I Rkdopfx Afnepb Rotor width: 2500 mm Rotor diameter: approx. 500 mm Electric motor: 250 kW

Year of construction: 2021, condition: new, Complete solution for the transport of bulk materials and demetalization of magnetic metal contaminants. Aluminum ascending conveyor belt including substructure Incline start area level ground (adjustable) Discharge height 1800mm (adjustable) Construction: height adjustable Construction for suspending the overband magnetic separator DMPM1200 included Conveyor belt width 500mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm Fpedpjhh A Iyefx Afneb T-20 studs - 400mm pitch 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separators, overbelt magnetic separators, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnets, magnetic belt separators, lifting magnets, filter rods, magnetic grids, magnetic grids, metal separators, block magnets, filter systems

Year of construction: 2015, condition: refurbished (used), Overband plate magnet Version in VA 1.4301 tightly welded Fjdpfjd Dy U Rox Afnspb 620 x 420 x 200mm completely welded housing Ring eyelets for suspension