Condition: good (used), Year of construction: 1991, Accessories: 1)Ladle 2)Sprayer Specifications: Locking Force: 650 tons Distance Between Tie Bars (W × H): 750 × 750 mm (29.5" × 29.5") Tie Bar Diameter: 160 mm (6.3") Stationary Platen (W × H): 480 × 1290 mm (18.9" × 50.8") Movable Platen (W × H): 480 × 1200 mm (18.9" × 47.2") Back Platen (W × H): 650 × 1200 mm (25.6" × 47.2") Die Height (Min-Max): 350 - 900 mm (13.8" - 35.4") Die Stroke: 550 mm (21.7") Die Injection Force (Min-Max): 25 - 52 tons Injection Speed: 0.1 - 5 m/sec (3.9 inch) Shot Position (below center): 0 - 175 mm (0" - 6.9") Plunger Stroke: 500 mm (19.7") Plunger Tip Diameter: 75 - 95 mm (3" - 3.7") Celq Sfwjum Rd Do Aorb Ejection Force: 25 tons Ejection Stroke: 125 - 0 mm (4.9" - 0") Dry Cycle Speed (max, load): 4.5 sec

Condition: used, Used Heat and Control NC-3006 Oil Roaster continuous nut fryer with capacity 600 kg/hour, made in 2011, installed 2013 and last used in 2014. Crslqjwhx Txe Sfw Ajb Major equipment includes fryer (max temperature 200 degrees Celsius with positioning conveyor, main conveyor, sediment conveyor), oil storage tank, plate heat exchanger, oil filter, drum coater, mixing tank, control system. 'The Oil Roaster continuous nut fryer is specially designed for low oil volume, precise temperature control and clean operation for every type of nut process: Peanuts, Almonds, Sunflower meats, cashews, honey-roasted, and more.

Condition: used, Year of construction: 2012, CNC Vertical Lathe VTL with Tool Changer.You Ji GTH-35/45 ATC-I.Year of manufacture 2012.Fanuc 0i-TD CNC Control.Face plate diameter 3500 mm.Hydrostatic table - Load max. 50 t.Swing diameter max. 4500 mm.Turning diameter max. 4000 mm.Turning height max. 2200 mm.Ram cross travel X -1750/+2160 mm.Ram vertical travel Z 1500 mm.Table drive 60/75 KW.Table turning speeds 2 ~ 75 mm.Torque at the table 67330 Nm.Tool magazine with 16 positions.Tool taper 7/24 BT 60.Floor space required 12375 x 8210 mm.Machine height 7920 mm.Full guarding.3-colour signal lamp (tower).AS NEW - 1400 run hours ! Available immediately. Colq Sfec S S Spjw Aerb

Condition: ready for operation (used), Year of construction: 2009, operating hours: 12,572 h, General Data Machine weight 5000 Main Drive Spindle speed range 1000 Additional Equipment Cjlq Sowb Ilwofw Aorb Cucchi Giovanni DBM.821 (2009) loader included This Schütte SG18 multi-spindle turning machine was manufactured in 2009. It features a largest rod diameter of 18mm, spindle circle diameter of 180mm, and bar feed of 60mm. Includes a Cucchi Giovanni DBM.821 loader. With a total weight of approximately 5000kg and a spindle speed max of 1000 1/min, the Schütte SG18 machine we have for sale is robust. Contact us for further details regarding this multi-spindle turning machine. Application Types Turning

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Cjlq Sfwswhquue Aorb Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° total power requirement 4 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Milling length 1750 mm Milling width 260 mm Module - max. 10 Table dimensions incl. water channel 460 x 2100 mm Table clamping surface: 250 x 1850 mm Milling cutter width - max. 100 mm Feed of the milling carriage, infinitely variable 0 - 500 mm/min. Rapid traverse 3000 mm/min Milling head - tiltable + / - 30 ° Speed range of the milling spindle, in 9 steps 29 - 178 rpm Bcfed2Md7M Milling head swivels on both sides for helical gearing 30 ° Machine weight approx. 4 t Space requirement approx. 4 x 1.85 x 1.85 m Equipment/accessories - 7 vices - change wheels - Clamping devices - documentation

Condition: new, Year of construction: 2025, Functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, Workpiece Clamping Diameter : ø 3 – 140 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 100 mm Workpiece Weight : max. 170 kg Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Grinding Process : Semi-Automatic, CNC Control Panel : Beckhoff CNC Movements : Z-Axis Indurstry 4.0 Compatibility : Available Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Sectors : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Crslq Sogb Ec Hefw Asb Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Easy to Use CNC Control Panel: Benefit from very simple operation and grinding program recording with the Beckhoff control panel and Z-axis servo movement. Industry 4.0: Fully compatible with Industry 4.0 applications, thanks to the Beckhoff control panel. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex SA-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex SA-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Z-Axis movement is provided by servo motor in CNC form. The part is loaded-unloaded and clamped manually. Settings are made from CNC control panel and grinding is started by pressing the start button. No other manual setting or control is made during grinding. Contact us for more details.

Condition: good (used), Year of construction: 2006, X Axis Travel: 850 mm Y Axis Travel: 550 mm Z Axis Travel: 580 mm Distance from Table Surface to Spindle Nose: 120–700 mm Crolqswhcxfj Sfw Aob Table Area: 1020 × 550 mm Max. Load of Table: 600 kg Fanuc : Oi-MC

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, CNC LATHE Mori Seiki NL1500Y/500 MELDAS-720BM-A 6"chuck Max turning dia:386 Length:515mm X260 Y:-50 +50 Z:590mm thru spindle 6,000rpm 12 stations Crslq Sowgvy Tsfw Aeb

Condition: used, Year of construction: 1977, Technical details: x-travel: 450 mm y-travel: 200 mm z-travel: 400 mm spindle taper ISO: SK 30 distance table/horizontal spindle: max. 400 mm cross rail adjustment - horizontal: 400 (manuell) mm range of revolution per miute: horizontal: 30 - 1275 / 18 step U/min spindle taper: horiz.+vertikal: SK30 distance between table/spindle: vertikal: max. 430 mm quill travel: 60 mm swival range +/-: 90° Grad range of revolution per miute: Vertikalspindel: 50 - 215 / 18 step U/min clamping surface area: 860 x 240 mm table swivable approx.: 45° feed:: 0 - 1.000 / steples mm/min rapid traverse: 2.000 mm/min. total power requirement: 6,0 kW machine weight approx.: 3100 kg dimension machine xH: 1,6 x 1,6 x 1,9 m Coolant device 3-way DRO Heidenhain control panel Colq Sjvc Awfjfw Aorb Accessories see photo *

Condition: used, Technical details: turning diameter: 1600 mm turning length: 8000 mm total power requirement: 125 kW power maindrive: 100 kW max. turning dia. over saddle: 1290 mm max. workpiece weight between centres: 20.000 kg faceplate turning speed range: 2 - 740 U/min Crslq Sfjv S Hidew Aeb faceplate diameter: 1600 mm tailstock quill stroke: 250 mm diameter of quill: 320 mm with CNC SIEMENS 840 Dsl complete Retrofit in 2014 full machine guarding to CE regulations with light guards 4-station SAUTER turret head 3 steadies, coolant attachment, chip conveyor diverse anti-vibration boring bars grinding attachment for turret wheel diamter 400 mm large tooling package *

Condition: used, Year of construction: 2000, Technical details: Crolohutpveq Sfw Ajb turning diameter: 1600 mm turning length: 3000 mm centre height: 800 mm turning diameter over bed: 1600 mm turning diameter over bed slide: 1400 mm turning dia. over face-slide: 1200 mm max. workpiece weight between centers: 20 to speeds: 5,6 -800 1/min transmission ratio: 3 spindle bore: 112 mm turret (x-stations): 8 / VDI 60 travel -x axis: 850 mm travel -z axis: 3020 mm rapid power traverse in X-and Z direction: 6 / 10 m/min power maindrive: 46 kW weight of the machine ca.: 22 to. dimensions of the machine ca.: 7,2 x 4 (3,11) x 2,7 m tech-in lathe, flatbed, tailstock, 8-pos. BARUFFALDI turret with 4 live tools, power 9kW, 4-pos. BARUFFALDI square-headed turret horizontal, C-axis, 3-jaw hydr. chuck SMW Autoblock KNCS 800/165, dia. 800mm, quick adjustment, power cylinder with 2 pressure clamping system, chipconveyor, coolant device, accessories *

Condition: used, Year of construction: 1963, Technical details: max. wheel diameter: 900 mm max. module: 10 weight of the machine ca.: 8200 kos. hob dia. - max.: 190 mm Colsvkpu Hjq Sfw Aerb cutter length max.: 320 mm milling spindle speeds (infinitely variable): 13-80 U/min workpiece length - max.: 750 mm max. workpiece diameter: 150 mm Counter holder milling mandrel is missing *

Condition: good (used), Year of construction: 1994, MAX TURNING DIAMETER-340MM MAX TURNING LENGTH-530MM SWING-520MM DISTANCE BETWEEN CENTERS-625MM CHUCK EQUIPPED-200MM GUIDEWAYS-BOX MAX ROTATION SPEED-3500 RPM SPINDLE NOSE-A2-6 Crelq Sfourqm New Aob SPINDLE BORE-78MM TAILSTOCK-YES

Condition: used, Technical details: x-travel: 450 mm y-travel: 150 mm z-travel: 400 mm distance between column - table edge: min./max.: 100 / 250 mm Crelq Sfeu Nc Nlow Aob turning speed range: 25, 44, 78, 130, 228, 400 / 6 step U/min feed:: X/Y: 10 - 100 / 8 step mm/min Table dimensions: 990 x 300 mm table surface area: 800 x 195 mm table swivelabel +/-: 30° ° total power requirement: nicht bekannt kW weight approx.: 1200 kg dimension machine xH: 1,5 x 1,3 x 1,5 m Horizontal milling machine, currently a tool clamped milling arbor Ø 32mm with hobbing cutter. Machine vice included. *

Condition: used, Year of construction: 1986, Technical details: Crjlq Sovgmlnsfw Aob turning diameter over bed: 1000 mm turning diameter over slide rest: 745 mm turning length: 3000 mm turning speed range: 4,5 - 900 U/min spindle bore: 110 mm max. workpiece weight between centres: 12500 kg total power requirement: 30 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 5,2 x 2,3 x 2 m 3-axes digital readout rapid feed, feed at upper support 350 mm 1 fixed steady face plate diameter 1000 mm coolant attachment *

Condition: used, Year of construction: 2001, Technical details: x-travel: 2000 mm y-travel: 1600 mm z-travel: 1140 mm b-axis: 0.0001° x 360° ° number of pallets: 4 table surface area: 1000 x 1450 mm max. table load: 6.000 kg turning speed range: 4 - 10000 U/min power capacity at 100 % load: 40 kW kW tool taper: HSK100 DIN69893A machine weight ab.: 63.000 kg Crjlq Sfwsv Av Evs Asb space required L x W X H: 12320 x 11000 x 4700 mm incl. 50 x HSK100 tool tapers *

Condition: good (used), Year of construction: 2016, Controller - Fanuc Solution C Travel-x - 860 Travel-y - 550 Travel-z - 550 mm Working Area - 950 x 550 mm Taper - Bt40 ATC-0 - 24 Direct type - spindle type Colq Sfswgbqwow Aerb RPM - 12000 Linear - guide way Weight - 5400 Kg

Year of construction: 1981, Condition: used, Technical details: lifting capacity: 0,63 t fork length: 680 mm weight of the machine approx.: 55 kg dimensions L x W x H: ca. 0,8 x 0,7 x 1,0 m It is dealing about a crane fork/Ladegabel * Crelq Sfjvwipqew Asb

Condition: good (used), Year of construction: 2006, Swing - 370.84 mm Chuck Size - 203.2 mm Bar Capacity - 1.7 mm Power - 12 W Max RPM - 4,800 RPM Tailstock - Yes Crelq Sfwswgbqdo Asb

Condition: used, Technical details: suction stud diamter: 380 mm filter surface area: 610 x 660 + 560 x 470 + 570 x 470 mm total power requirement: 4,0 kW Colq Sfou Nwwdsw Ajrb dimensions L x W x H: 0,6 x 1,1 x 2,2 mm - 2x suction nozzles at the bottom left/right: Ø 300 x 200 / Ø 200 x 170mm - exhaust air outlet W x H: 280 x 145mm - 3 pieces slide-in filters - with wall fixation *

Condition: good (used), Year of construction: 1995, Turning length - 600 mm Turning Ø - 250 mm Ø above the bed - 250 mm Length between centers - 475 mm X-axis - 140 mm Z-axis - 640 mm Cslq Sowgbm Eofw Asrb Max workpiece weight - 3000 kg Spindle bore - 53 mm Number of turrets - 12 Turning speed - 5000 rpm Spindle motor power - 5.5 kW Tailstock - no Bar feeder - no Weight - 2800 kg Length x width x height 1890.0 × 1600.0 × 2065.0 *2 units available

Condition: used, Technical details: material thickness: 1,0 mm material width: 17,0 mm internal diameter: 30,0 mm external diameter: 78,0 mm Spare part for bench drill BT 2 Patt spring - Return spring - Spiral spring Declaration of conformity according to ISO/IEC 17050-1 Acceptance test certificate 3.1 according to DIN EN 10204 available Crjlq Sou N E Evefw Ajb *

Condition: good (used), Year of construction: 2018, Spindle tool size - ISO-50 Spindle speed - 6.000 RPM Spindle steps - 2 steps X axis - 3.100 mm Y axis - 2.200 mm Z axis - 900 mm Table dimensions - 3.000 x 2.100 mm Cjlqov Tufis Sfw Aorb Tool type - BT-50 / DIN-50 ATC capicity - Standard 30 (opt. 40/60)

Year of construction: 2015, Condition: used, Technical details: Colq Sfwjwhu The Asrb suction capacity: 1600 m³/h filter: siehe Foto weight of the machine approx.: 85 kg connected load: 0,75 kW dimensions L x W x H: ca. 1,0 x 0,6 x 0,7 m Oil mist separator - Dry separator with fan -Intake connection Ø 195 x 70mm -Exhaust air opening WxH: 440 x 150mm -380 V fan External operation *

Condition: good (used), Year of construction: 2004, X-axis travel - 400mm Y-axis travel - 300mm Z-axis travel - 250mm Worktank length - 980 mm Worktank width - 730 mm Worktank height - 250 mm Cjlq Sfwov Sw Hge Aorb