Used Glazing bead saws for sale (7)

Condition: new, Number of motors 2 Stück 0 2650 mm Control , Ruchser RU-GLS-ED 45° glazing bead saw ----- Developed for cutting glazing beads in pairs The RU-GLS-ED45° double glazing bead saw can be adjusted manually to size. The Machine was designed for cutting glazing beads in pairs with one Cutting angle of 45° developed and has a fixed and a movable saw unit. The manual length adjustment is equipped with an electric digital display. Cutting lengths of 150 mm - 2650 mm can be achieved be sawn. During the cutting process, the glazing beads are with a pneumatic tensioning device from above and from the front to prevent tipping of the glazing beads. It is operated via a safety Two-hand operation. Saw blade diameter 250 mm, length 3700 mm, width 700 mm, Voltage 400V Pos. 1: RU-GLS-ED45° double glazing bead saw ----- with manual measurement adjustment, for pairs Cutting glazing beads, cutting angle 45°. Manual length adjustment with electric Digital display, cutting length from 150 - 2650 mm. Pneumatic clamping device from above and from in front. Safety two-hand operation, saw blade diameter 250 mm, length 3700 mm, width 700 mm, Voltage 400V ----- Basic price in the above version: on request! ----- Ex works. Plus packaging and shipping as well as current Material cost surcharge of 6% of the total price Options with additional costs: ----- Item 1.1 Set of inserts for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price request, after checking the glazing beads. Depending on the number of glazing beads used, this can happen several sets of inserts are required. To determine the exact number In order to be able to do this, we need profile drawings before order confirmation the glazing beads to be used. Additional charge: on request, after sending your glazing bead drawings Pos. 1.2 Recording device for scanning gauge RU-GL for transferring the scanning dimensions to the saw with pneumatic installation. Additional price: 611.00 euros Pos. 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing bead Additional price: 478.00 euros Pos. 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. scanning length approx. 1430 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing bead Additional price: 428.00 euros Pos. 1.5 Operating time switching device for independent suction. Adjustable from 5 seconds. up to 3 hours. With every sawing process automatically becomes the set time sucked off. Will be used again within the suction time sawn, the set suction time begins again from the beginning. Additional price: 702.00 euros Item 1.6 1 set of carbide saw blades RU-GLS-P45 and RU-GLS-ED45° D = 250 mm x 3.2/2.2 x 30, 80 teeth, each consisting of 1 piece of saw blade L6444(right) and L6443, (left), with special grinding 43°. Additional price: 576.00 euros Guodpfx Afexmk Dqsioh ----- All prices in euros, net, plus statutory. VAT (technical information according to the manufacturer, without guarantee!)

Condition: good (used), Year of construction: 1989, Number of motors 1 Stück 450-2400 mm Control manuell Gedpsvnwctofx Afijuh

Condition: new, Number of motors 2 Stück 0 2380 mm Control , RUCHSER RU-GL-45° ----- Glass bead saw on the sliding work table Developed for cutting glazing beads in pairs on the sliding work table The RU-GL glazing bead saw is mounted on a sliding work table Scanning and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw on carriage Manually movable mounted. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, Width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. Pos. 1: RU-GL double glazing bead saw 45° on RU-SA-3000 ----- for glazing beads up to 30 x 70 mm (W x H)!!!, Mounted on the sliding work table with scanning and Clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw on carriage manually mounted movably. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, width 1400 mm, Working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. ----- Basic price in the above version: on request! ----- Ex works. Plus packaging and shipping as well as current Material cost surcharge of 6% of the total price Options with additional costs: ----- Item 1.1 1 set of carbide saw blades for for glazing bead saw RU-GL D = 200 mm, 64 teeth, consisting of 1 piece each Saw blade L1233 (left) and L1085 (right), with special grinding 43°. Additional price: 421.00 euros Pos. 1.2 Holding device for scanning gauge RU-GL for transferring the scanning dimensions to the saw with pneumatic installation. Additional price: 611.00 euros Pos. 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing beads Guodpfx Ajxmkz Nsfijh Additional price: 478.00 euros Pos. 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. scanning length approx. 1430 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing bead Additional price: 428.00 euros Item 1.5 Set of inserts for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price request, after checking the glazing beads. Depending on the number of glazing beads used, this can happen several sets of inserts are required. To determine the exact number In order to be able to do this, we need profile drawings before order confirmation the glazing beads to be used. Additional charge: on request, after sending your glazing bead drawings Pos. 1.6 Operating time switching device for independent suction. Adjustable from 5 seconds. up to 3 hours. With every sawing process automatically becomes the set time sucked off. Will be used again within the suction time sawn, the set suction time begins again from the beginning. Additional price: 702.00 euros ----- Total price i...

Condition: used, Year of construction: 2017, Number of motors 2x 1.2 kW Stück 0 2800 mm Control ja 0 OMGA Double Glazing Bead Saw Model TRF 527 NC CE ----- Sold on behalf of the customer from the customer's location. The machine was in use until closing and is now at the customer's warehouse. Technical manufacturer's description: Double miter saw for cutting two glazing beads simultaneously. The right saw unit is fixed; the left unit is adjusted via the positioning control. Features of the positioning control: - Monochromatic graphic display 240 x 64 pixels - Display of 30 characters on 8 lines - Keypad with 28 function keys - FN key for interrupting the function - Diagnostics and error messages - Language selection: Italian, German, British, Spanish, French, and Swiss - 10,000 memory lines divisible into 999 cycles, max. 99 lines per cycle - RS-232 interface - Dimensions can be entered manually or via USB interface - 3 correction values ??each for the left and right saw units - 1 correction value for counter profiles The adjustable unit is equipped with recirculating ball bushings and runs on steel-hardened axes. Both units have supports that allow the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process is complete, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. Machine features: - Fixed right-hand saw unit - Pivoting clamping device Guedpfx Afsxmamnjioh - Positioning control for TRF 527 NC CE - Maintenance unit - Center support - 220 mm Ø carbide-tipped saw blades - Two-hand control - Intermediate support for simultaneous sawing of two glazing beads - Pneumatic saw unit lift - Motor protection switch - Pressure switch - Undervoltage release - Overload switch - Tool set - 2 x 4-position angle star saw holders Technical specifications: - Motor power: 2 x 1.2 kW - Saw blade diameter: 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90 degrees: 55 mm - Max. cutting width at 45 degrees: 40 mm - Max. cutting length: 2800 mm - Min. cutting length: 158 mm - Weight 217 kg ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus VAT.

Condition: used, Year of construction: 2020, Number of motors 2 Stück 0 2800 mm Control ja yes WEGOMA Double Miter Saw DS 2750 E1 ----- Sold on customer order from the location, can be viewed in operation! Item 1 Wegoma Double Miter Saw 2750 E1, 2800 mm ----- For wooden glazing beads, muntins, profile strips, aluminum strips, etc. Working length 2800 mm, with pneumatic saw feed via high-precision linear guides, center support, horizontal clamping. Including manual tilting device. Clamping of the tilt and X-axis position via high-performance clamping elements. Head tilting 22.5/90/135 degrees, continuously adjustable, manually. Including EPS 220 positioning control ----- for precise length positioning. With touch panel (dust and splash-proof) display for entering cutting data manually or via data integration. - Ethernet connection 10/100 (TCP/IP) - USB interface - Data transfer possible via USB or network. Includes control cabinet, motor, and software licenses. - Automatic cutting (can only be activated via software in conjunction with access protection) 2 carbide saw blades Gusdswgwlqopfx Afieh Item 2: Combined workpiece clamping ----- from the front and from above. Instead of horizontal clamping. (Technical specifications according to the manufacturer - no guarantee!)

Condition: new, Year of construction: 2025, Number of motors 2 Stück 0 3000 mm Control ja/CNC loading dimensions L x W x H 4000 x 1500 x 1500 mm Weight 800 kg HECHT double miter saw Exenso DS350E - 3000 mm ----- For wooden glass strips, rungs, profile strips, aluminum strips, etc. Pos. 1.1 Article number 942.5103 1 piece HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade holder Ø 350 mm - Incl. 1 piece center support. Gjdpfx Afevzt D Tjijuh - Units clamped pneumatically. - Positioning control Exenso DS3 with touch panel 15" display in dust-proof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Entering the cutting data by hand - Processing data from a cutting list (data set according to specification) - Processing measuring rod data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Incl. control cabinet, motor and software licenses. Item 1.2 Item number 723.0121 2nd DS saw blade wood Bevel/bevel/flat tooth - positive Item 1.3 Item number 942.5236 2 sets of DS workpiece clamping combined Combined workpiece clamping consisting of: Pneumatic swivel clamp - for clamping the material from above. (Free access to the work table) Pneumatic horizontal clamp - anti-twist clamping cylinder with pressure piece. The clamps can be selected individually via the saw control. The clamping sequence can also be set via the control. Including safety pre-tensioning pressure Scope of delivery for 2 sets: - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item 1.4 Article number 942.5997 DS pneumatic feed device Item 1.5 Article number 945.2007 Packaging DS350 (transport frame) ----- Total price in this version - on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of the remaining pieces with blunt glass strips instead of the 2nd set Item 1.3 943.5236 DS workpiece clamping combined! Pos. 2.1 Article number 942.5201 ES / DS workpiece clamping from the front - 2 clamping cylinders with anti-twist protection - 2 cylinder holders with clamping lever ----- For rebated glass strips, instead of standard panels without a groove: Pos. 2.2 Article number 942.5241 DS350 table supports grooved according to customer sample The assembled table supports are milled according to the customer's drawing. Please send us all profile drawings that are to be sawn (pdf, dxf and hand samples) ----- If, for example, aluminum is also to be sawn: Item 2.3 Article number 942.5203 DS hydropneumatic feed device (instead of pneumatic feed cylinder) ----- OPTIONAL accessories, with additional charge on request: ----- Item 2.4 Article number 942.5237 DS "Excess length" software (subsequent steps must be confirmed) Sequence control including hardware. After entering a cutting dimension > max. cutting length of the system, the cutting is carried out in a cyclical manner. (Left unit cuts, right unit moves the material and cuts to size.) ----- Item 2.5 Article number 944.1023 GMF caliper 3000mm complete set (1500mm plus extension 1500mm) incl. charger and receiver. A robust aluminum measuring rail with a measuring ran...

Condition: used, Year of construction: 2018, Number of motors 1 Stück 0 2500 mm Control nein Hecht ES 350 single-sided glazing bead saw ----- Pneumatic pivoting against fixed stops. 45º/ 90º/ 135º with pneumatic sawblade feed pneumatic tilting via manual tilt stop with machine base, pneumatic clamping HM sawblade 350 x 3.0/2.2/30 Z 100 Saw stand dimensions: length 700 mm, depth 1,600 mm, height 1,500 mm 1.5 m touch stop 1.5 m support with support Gujdpevpr N Refx Afish 3 m touch stop Support extension from 1.5 m to 3 m with support Table inserts grooved for rebated glazing beads HECHT ASB manual length stop with digital display, 2,500 mm With dust extraction unit (Technical specifications according to the manufacturer - no guarantee!)