Condition: refurbished (used), Comprehensively tested, used Kemutec approximately 400 litre working capacity (product dependent) 316 stainless steel ribbon blender. Trough measures approximately 1680mm Long x 580mm wide x 700mm deep. Has stainless steel single interrupted ribbon driven by 5.5kw motor & gearbox. Unit includes stainless steel hinged lid with clamps. Includes bottom discharge valve. Djlqvm Tjun Sr Eeiecg

Condition: new, Year of construction: 2024, Extremely strong industrial magnet for iron separation Special price 970 € net (shipping 14,90 € net) *the lengths can be seen in picture 2 The active side has a stainless steel end plate (material 1.4301). There are threaded holes on the back for mounting *handle available on request The block magnet systems can be used up to a maximum operating temperature of + 100 °C. Dcjlqvmetqfhxe Tieg The magnet surface should be regularly cleaned of any trapped iron parts. Starting heights for all types e.g. For a steel nut M5 approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, the iron parts "jump to the holding surface of the magnet". Installation example 2: Mounted in a piping system with direct contact to the material flow. For a high level of separation safety, it is possible to install several block magnets in a cascade, one behind the other. Installation and safety instructions: When handling, unpacking and then installing, make sure that there are no loose iron parts such as tools or screws in the vicinity. The magnetic attraction is so strong that painful injuries can occur if fingers come between iron parts and the active surface. There should be no steel parts within a minimum distance of 400 mm below the active surface.

Condition: excellent (used), Year of construction: 2011, CNC Lathe NEF 400 2011 With driven tools Technical specifications: Turning diameter 350 mm Turning length 650 mm Swing diameter over bed 385 mm Swing diameter over cross slide 350 mm Distance spindle nose to tailstock 902.5 mm Coc Eg S Rrsv Umldegerb Main spindle: Speed range - main spindle 0 - 4,000 rpm Drive power - main spindle 15.3 / 11.5 kW Max. torque 430 Nm Spindle diameter in front Bearing 100 mm Spindle bore 87 mm Max. bar diameter 52 mm Usable bar diameter 52 (45) mm Dslqvm Towhxkdsijcg Max. chuck diameter 250 mm Chuck diameter 165 mm Spindle head 170 h5 C-axis 0.04 ° Tool turret: Number of tool positions: 12 positions Shaft diameter DIN 69880: 30 mm Driven tool stations: Number of driven tool stations: 6 positions Speed range - driven tool stations max. 4,500 rpm Drive power of driven tool stations: 5.5 kW Travels: X-axis 255 mm Z-axis 800 mm Tailstock: Tailstock travel 680 mm Tailstock mount MT 4 Clamping pressure 6.8 kN

Condition: new, Year of construction: 2019, operating hours: 135 h, System consisting of: 1 Qirox QRC 410 welding robot including QC2 adv. controller, handheld programming unit, 24 V buffering, PC connection on the cabinet side, 2 GB flash drive Gas nozzle sensor, arc seam detection, multi-layer technology, spot editor, QTI, QWP Qineo Puls 600 with master control module, wire feeder, torch hose package, MRW 510 evo welding torch, torch test gauge, mechanical cleaning, pressure booster, 20 kN floor track, 12 m travel distance Delqjwhxiaevm Tijcg Connection control, 1 light barrier, 1 start pre-selector Delivery date: from stock. Subject to prior sale. Robot is mounted on a C-stand in a suspended position. System can be converted to 2 workstations and supplemented with manipulators available in stock.

Condition: excellent (used), Year of construction: 2016, 1 used rapid steam generator ----- Manufacturer: CERTUSS Type: Universal TC Capacity: 700 kg/h Maximum heat output: 459 kW Operating pressure: 10 bar Water capacity: 103.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2016 Dolswhxh Asqvm Tiecg Equipped with a Certuss gas burner, gas control system, control cabinet with touch control, mounted on the boiler body, and the existing coarse and fine fittings

Condition: used, total height: 1,400 mm, total length: 600 mm, total width: 600 mm, outer dimension length: 600 mm, Empty weight: 200 kg - Documentation available: No - Grinding diameter: 32mm - Transport dimensions: 600mm x 600mm x 1400mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dcelqvmswhxfnj Tieg Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: refurbished (used), Used Gericke model GCM1200 stainless steel continuous paddle mixer. Approximately 200 litre working capacity and 300 litre working capacity. Approximately 4,000-40,000 litre per hour capacity. Mixing trough approximately 480mm wide X 1200mm long x 600mm deep. 27 pitched paddles direct driven by SEW Eurodrive 5.5 kw 230/400 volt 3/50 1430rpm motor at 51 rpm. Has adjustable weir plate discharge. Dslqvmjmhhp Ae Tiecg

Condition: used, Year of construction: 2024, EMCLAB EMC-11S-UV spectrophotometer, built in 2024, from a food laboratory Dolowhw T Dsqvm Tiscg Note: This is a starting price. The sale will be conducted in an online auction with the highest bidder (plus buyer's premium and VAT). Please follow the link for more photos and information.

Condition: excellent (used), Year of construction: 1996, operating pressure: 10 bar, 2 used steam boilers ----- - mounted on a skid - Dcslowhxhveqvm Tijg Manufacturer: LOOS, Gunzenhausen Type: U-HD Heating surface approx.: 14 sq m Capacity: 800 kg/h Permissible operating pressure: 10.0 bar Increased test pressure: 18.0 bar Water capacity at low water level approx.: 748 l Water capacity when full approx.: 1,108 l Year of construction: 1996 Equipped with a Weishaupt GL3/1-E oil burner, ZMD, 90-630 kW, gas control line, feedwater pump, control cabinet and the existing coarse and fine fittings.

Condition: used, Year of construction: 2007, total height: 1,000 mm, total length: 1,400 mm, total width: 1,300 mm, outer dimension length: 1,400 mm, outer dimension width: 1,300 mm, Empty weight: 300 kg Max. workpiece: 80mm Sleeve-diameter: 250mm Input-height: 860mm Output-height: 830mm - Year: 2007 Dcjlqjwhxfhjvm Tieg - Documentation available: No - CE mark available: Yes - Serial number: 40080/70 - Control: Conventional - Motor power: 0.8kW - Transport dimensions: 1400mm x 1300mm x 1000mm (l x w x h) - Transport weight [kg]: 300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Used Calmic Eurovent 316 stainless steel vacuum shelf dryer. Has approximately 0.75sqmt drying area. Has (3) 500mm wide x 500mm deep x 160mm high individual drying compartments. Unit includes hot oil recirculation system and (1) Leybold vacuum pump. Unit includes electrical cabinet and separate control cabinet. Main unit is mounted on a mild steel frame. Dslem Uyc Sjqvm Tijcg

Condition: like new (used), Used Kemutec Kek model 400 PE stainless steel Ribbon/ploughshare mixer. Has approximately 400 litre working capacity. Currently fitted with T-arm mixing blades driven by electirc motor/gearbox. Includes spare stainless steel plough blade mixing shaft. Has (1) side chopper with electric motor. Includes centre bottom discharge with valve. Mounted on mobile base. Dceloiwytgoqvm Tiog Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic and France to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Doletz Tgqoqvm Tiocg Unit is mounted on lugs.

Condition: used, Used Bibby approximately 3,00 litre 316 stainless steel vertical mixing vessel. Unit measures approximately 1,980mm tan to tan x 1,400mm diameter. Unit has welded dished top and bottom heads. Internal rated 3.61 bar/full vacuum design pressure at 100 deg.c. Unit has top entry off-set 2-tier, 3-blade agitator with Lightnin model LS150 drive. Unit is mounted on side supports. Dcolsun Sw Isqvm Tijg

Condition: used, Used Bibby approximately 400 litre capacity 316 stainless steel vertical reactor. Unit bolted dished top and welded dished bottom heads. Approximately 750mm diameter x 950mm straight side. Internal rated 3.46 bar/full vacuum design pressure at 100 deg.c. External 316 stainless steel jacket rated 6.6 bar/full vacuum design pressure at 100 deg.c. Unit has top entry stainless steel agitator with Lightnin model LS25V drive. Unit is mounted on side support lugs. Dcolqoun Sxrsvm Tieg

Condition: used, Used BCD approximately 1,000 litre capacity super duplex 2507 stainless steel vertical reactor. Unit measures approximately 1,450mm tan to tan x 920mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at -10 to 180 deg.c. External 316L stainless steel jacket rated 10 bar / full vacuum design pressure at -10 to 180 deg.c. Unit has bottom entry stirrer with mag drive. Unit mounted on (3) stainless steel legs. Dcsljun Sycjqvm Tisg

Condition: like new (used), Used Zetterstrom 912 litre capacity 316L stainless steel vertical reactor. Unit has welded dished top and bottom heads. Internal rated 6 bar design pressure at -35 to 180 deg.c. External stainless steel jacket rated 6 bar/full vacuum design pressure at 180 deg.c. Unit has top entry 3-tier stainless steel agitator direct diven by 4 kw 220/380 volt 3/50 1440 rpm motor via Lightnin model LS400 gearbox. Also includes (3) baffles. Dcslqvm Tegfb Rgsieg Unit is mounted on side supports. Unit requires a mechanical seal and backing plate. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: like new (used), Used Netzsch model LMZ2 stainless steel bead mill with associated parts. Unit has stainless steel peg style rotor and stainless steel jacketed chamber. Approximately 2 litre capacity. Unit includes feed pump and control panel. All mounted on stainless steel base. Dcslqvmohpciae Tisg Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: like new (used), Used APV approximately 50.4 square meter stainless steel shell and tube bundle heat exchanger. Has (328) 16mm diameter X 3060mm long stainless steel tubes rated 3 bar pressure. Stainless steel shell measures approximately 700mm diameter X 3060mm long rated 1.5 bar pressure. Bolted stainless steel heads. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items. Djlqvmog Sr S Ro Tiecg

Condition: refurbished (used), Used Refurbished Giusti model Pharmix 120 litre capacity 316 stainless steel jacketed process vessel. Internal approximately 510mm diameter X 585mm straight side. Has clamped dished top and welded dished bottom heads. Internal rated full vacuum/1.38 bar working pressure. Has 321 stainless steel external jacket rated 3.45 bar working pressure. Vertical agitator with PTFE wall scraper blades direct driven by 1.1 kW, 415 volt, 3/50, 1420 rpm motor via Supaflex enclosed VS drive rated 600-3000 rpm motor and Electro power gears type ESRV2 gearbox rated 34.1 reduction ratio. Bottom entry homogeniser direct driven by a pole changing 2 speed 3.7/4.4 kW, 400 volt, 3/50, 1425/2890 rpm motor. Mounted in stand with hand hydraulic lift for raise and lower of top dished head. Has approximately 38mm (1.5") centre bottom discharge with valve. Designed for producing liquids, creams and semi solids under sterile conditions. This unit has recently been refurbished and is immediately available for sale. Here at Perry Process Equipment Ltd our engineering workshop aids us in being a premium supplier of high quality used process equipment. We can carry out a range of services from basic equipment testing right up to mechanical refurbishment, for a broad range of industries. Contact us for further details about the refurbishment work carried out on this unit and to request a free no-obligation quotation. Dolsgcb A Esqvm Tiocg Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: like new (used), Used Sinclair Stainless Fabrications approximately 15,000 litre 316 stainless steel vertical reactor. Unit measures approximately 2,300mm diameter x 3,540mm straight side. Has welded dished top and bottom heads. Internal rated 3.6 bar/full vacuum design pressure at 165 deg.c. Has external stainless steel limpet coil jacket rated 5.5 bar design pressure at 165 deg.c. Unit has top mounted stainless steel agitator with 2-tier 4-blade turbine blades. Dcelqvegwbbfom Tijg Driven by 45kw motor/gearbox with new double mechanical seal. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: like new (used), Used Wefco approximately 55,000 litre 304 stainless steel vertical mixing tank. Dcslqjgf A Txovm Tiog Unit measures approximately 3400mm diameter x 6100mm straight side. Top entry agitator driven by a 5.5kw 1455rpm 3/50 motor via a gearbox. Has welded flat top and dished bottom heads. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: used, Used STEPHAN stainless steel cutter. - Type UMM/SK40E PILOTE Dcslqvordg Taom Tijg - No. 4418598-Stainless steel tilting vessel double jacket - Motor : Hp 10 - Rpm 1500/3000 - 380 volts - Electric control panel - scraper with motor

Condition: used, Used WINKWORTH stainless steel double jacket high speed mixer. Dcjlqvmjrdg S Do Tisg - Type RT80 - Total capacity : 120 litre-Useful capacity : 80 litre - Stainless steel double jacket - Shaft equipped with 4 mixing blades - Motor variator : 7.5 kw – Hp 10 – Rpm 30/150 - 380 volts - Stainless steel chopper : motor control: 5.7/4.7 kw – Hp 7.7/6.3 / Rpm 3000/1500 – 380 volts - 2000 watt hot water heating skid

Condition: like new (used), Used Lödige model FKM 2000D stainless steel ploughshare mixer. Approximately 2,000 litre total capacity and 800-1400 litre working capacity. Mixing chamber has carbon steel jacket. Ploughshare mixing blades driven by 55kw, 2960rpm, 3/50 motor via a gearbox. Has provision for choppers but none currently fitted. Has (2) side inspection doors and (2) bottom discharge outlets. Djlqvm Tsgd Dr Rsiecg Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.