Year of construction: 2016, Condition: like new (used), Functionality: fully functional, machine/vehicle number: GoTx1900/2600FX, The GoTx® 192FX/190FX/260FX are powerful fixation units for pigment inks. Designed to run with the GoTx® 2190/2260 printers for seamless productivity. Utilising quad zone heater element plates below and above the media horizontally where the fabric is not touched during cure. For consistency we do not employ IR heatlamps to avoid cool cure zones across the media. Fixation on a horizontal path provides better control and avoids smoke, steam or oil which can be dragged across the media = ghost free imaging. Up to 60 linear meters per hour output, with variable top, bottom radial axial fans for steam removal The GoTx® fixation modules are Crolip Ejv Dcc Rj Umob designed for uninterrupted production and media is NOT touched during transfer fixation process.

Condition: good (used), Functionality: fully functional, Year of construction: 2017, QLB40 - Asphalt Batch Heating Asphalt Plant 30 - 35 ton per hour maximum production Fully automated programming Operational in Hastings for 4 years from new. 12tonne heated storage hopper for finished product 85,000litre bitumen storage capacity Price by negotiation Colip E Uou Tlqksmjrb Currently in use. Available May 2025. video on you tube. Tupore asphalt plant sale. search.

Condition: new, Year of construction: 2009, • Specification: Extraction & condensing, Inlet pressure: 104 bar, Output: 215MW, Extractions: MP2: 22 bar, MP1: 10 bar, LP: 4.5 bar, Feed Water: 0.4 bar, Minimum load: No extractions, Only bleeds, Steam flow: 45 kg/s, Maximum load: Steam flow: 270 kg/s. • Generator: 250 MVA, Air to Water Cooled, 18 kV, 8019 A, 50 Hz, 3000 rpm • Condenser: Average: 17 ºC, Min: 15 ºC, Max: 25 ºC. See attachment for inventory list of all items included and packaging details • Storage Conditions: Delivered 2009 and unused, currently stored indoors and secured, Turbine & Generator completely sealed, silica gel is inserted in the Turbine & Generator and regularly replaced. Crsliev Tfp Ssp E Umsb Equipped with electronic monitoring sensors for humidity and temperature with criteria from Toshiba for storage. Contact Matt Fraser on +61 448 648 700

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 50, laser power: 12,000 W, sheet thickness steel (max.): 100 mm, total length: 125,000 mm, warranty duration: 60 months, GX(Pro) Double Exchange Platform Sheet Fiber Laser Cutting Machine. Working platform size: 3048mm*1524mm, 4064mm*2040mm, 6096mm*2540mm, 12500mm*2540mm; Cslipsruz Uxo E Umsrb Laser source power: 3000 - 40000W Optional function: automatic loading and unloading system

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: V001420, Profi-Joint Shaper Cjlijv Rzw Tep E Umsrb 6000mm Four stage press Includes PUR glue pump and applicator Additional consideration: - Sawdust extraction (AUD$20,000)

Condition: good (used), The AccuPlace Model 3065 is a film adhesive and label applicator, designed to place items of maximum dimension 76 mm x 165 mm with high accuracy and reproducibility. Notes - 1. 8 Nos. available 2. Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer. Celip Eevm Epfs Umjrb Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: like new (used), Functionality: fully functional, Year of construction: 2017, machine/vehicle number: Geo Knight Maxi - Press, Please see PDF for detailed secifications: The Maxi Press AIR is an Automatic large format heat transfer press intended for more automated and higher pressure needs than the Manual version. The Maxi- AIR provides an oversized platen & a better production-oriented press with a single front loading table and high pressure pneumatic lifting system. This pressure system is powered by a dual air-bag, 10-ton, 20,000 lbs max force self leveling mechanism. The press is activated with a push of a button, and automatically releases at the end of the timing cycle. The front console features the Digital Knight control, regulating digital temperature and digital automatic timing control, as well as full air pressure regulation. Ideal applications that the Maxi- AIR has performed flawlessly include: large fabrics & piece goods, full-bleed printed sportswear, banners, fl oor mats, carpets, mouse pads, plastics, sheet metal and much more. Most importantly, the 20,000 lbs of regulated applied force allow for deep embedding of materials such as TILES into nomex padding for full bleed wrap-around printing, as well as larger embossing applications. The Maxi- AIR strongly supports the sublimation transfer process, as well as digitally produced transfers, Cslip E Uov Dm Udjmerb hot and cold peel plastisol transfers and large format laminating processes.

Condition: new, MOBILE CONCRETE BATCHING PLANT M100-TWN GENERAL Plant Type : MOBILE Concrete Plant with TWIN SHAFT MIXER Plant Capacity : 100m³/hour freshly compressed concrete Mixer Capacity : 3000/2000 lt (2m³ Compressed Concrete) Total Motor Power : 143kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY TRANSPORTATION Crolip Eswhybdj Umob * MINUMUM INVESTEMENT FOR FIELD GROUNDWORK * QUICK INSTALLATION DETAILS: Crjbtuhm Njflz Hlo Aeb Compacted concrete capacity: 100 m³/h Air Compressor Capacity : 950 lt/min Aggregate Hopper : 4 Bins : 4×11.25 = 45 m³ Mixer Type : TWIN Shaft (2 m³). 3000/2000 lt capacity Mixer Converyor Band : 1000 mm * 13000 mm Weighbridges: Aggregate/ Cement /Water/ Additives

Condition: refurbished (used), Year of construction: 2003, operating hours: 24,000 h, Functionality: limited functionality, bending radius: 300 mm, bending angle: 183 °, wall thickness: 8 mm, pipe diameter: 100 mm, pipe length: 4,100 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Colijtrd T Tep E Umerb Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: used, Year of construction: 2003, grinding wheel diameter: 400 mm, helix angle: 45 °, Used Höfler Rapid 1500, built in 2003 Celipjv U D Tfe E Umerb Mahr measuring system Interlit oil preparation system Location: Australia

Condition: good (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: V001257, Profi-Joint Shaper 6000mm two stage press Includes PUR glue pump and applicator Additional consideration: Sawdust extraction (A$20,000) Crolipev Ryb Ro E Umeb

Condition: good (used), Year of construction: 2021, operating hours: 2,109 h, Functionality: limited functionality, 160t clamp tonnage, 35mm main barrel with 150ccm shot volume, 15mm secondary barrel with 15ccm shot volume, 16 hot runner zones, 4+4 shut off nozzle valves, servo driven swivel unit on moving half. Comes with Eunil Magazine Loader and Viper 12-RC300 robot Notes - 1. Two machines available for sale 2. Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer. Celip Eovmulie Umerb Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: like new (used), Year of construction: 2015, operating hours: 500 h, Functionality: fully functional, machine/vehicle number: Transmatic 7360 Sport, input voltage: 400 V, type of input current: three-phase, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, MAKE: TRANSMATIC MODEL: 7360 SPORT CONDITION: VERY GOOD YEAR: 2014 POWER SUPPLY: 400v 3PH Crelip Eov Dpyvo Umob AIR SUPPLY: YES NOTES: *3 MODES * ROLL TO ROLL FABRIC *ROLL PRINT TO PIECE FABRIC *ROLL FABRIC TO PIECE PRINT Designed for digital printing on cut pieces, placed prints, traditional roll-to-roll printing. This application is especially suitable in the sports T-shirt printing industry. A new oil heating system ensures uniform temperature distribution over the entire length of the cylinder with minimal energy consumption. Transmatic’s oil heating systems consume 50% less energy than electric machines.nThis calender has 3 different ways of operation. 1)Transfer papers are placed with the design facing upward on the table. Cut fabrics (fronts, backs, arms, necks, etc.) are placed on top of the pattern. The printed fabric pieces and paper leave the machine via a rear conveyor belt. 2)Use of roll transfer paper with the ability to place cut pieces of fabric. 3)Traditional printing of both transfer paper and fabrics in continuous. Electro-pneumatic felt guide control. No.6 3″ quick-connect shafts. Three friction-driven and three friction-driven and motorized rewinders. Reversing safety bar. n One outfeed conveyor belt cools and carries the printed pieces to the back of the machine to detach them. Automatic machine shut-off system after felt cooling Digital adjustable speed control. Requires compressed air.

Condition: ready for operation (used), Year of construction: 2013, Control Unit Brand SIEMENS Main Drive Spindle speed range 14000 rpm Number of axis 5 Movement X-Axis Movement 650mm Y-Axis Movement 650 mm Z-Axis Movement 560 mm C-Axis Movement 360º This 5-axis DMG Mori Seiki LaserTech 65 was manufactured in 2013. A universal machining centre featuring a spindle speed of 14,000 rpm, SIEMENS control, and a travel range of 735 mm x 650 mm x 560 mm. It offers a full rotation range on the C-axis and a swiveling range on the A-axis of +120°/-120°. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki LaserTech 65 machine we have for sale. Contact us for more information. Application Types Cslisvl I S Tep E Umerb Milling

Condition: good (used), Year of construction: 2010, Distance spindle nose and table - 125 - 725 mm X-travel - 1100 mm Celiov At Tdop E Umerb Y-travel - 650 mm Z-travel - 600 mm Control 18i-MB Fanuc Max. rpm - 15.000 min/-1 Main spindel - 18,5 / 22 kW Torque - 150 Nm Tool taper - BT-40 Table surface area - 1300 x 650 mm Max. table load - 1100 kg T-slots - 5x T-slot distance - 125 mm

Condition: good (used), Year of construction: 2021, operating hours: 1,960 h, Functionality: limited functionality, overall weight: 198 kg, total length: 1,750 mm, total width: 1,065 mm, total height: 2,290 mm, The hydration chambers system comprises four separate and independently controlled, sealed chambers, all of which are controlled by a single Eurotherm T2750 programmable automation controller and Eurotherm Eycon20 Visual Supervisor. The software used for programming both the T2750 and Eycon20 is LIN tools, a multi-purpose Windows-based package for use both off-line and on-line. Operation Manual, Technical details and electrical drawings available upon Request Notes - 1. 2 units available 2. Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer. Crelip Eovmi A Ao Umob Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: like new (used), Year of construction: 2012, input voltage: 400 V, 2 X Zentner Washer 250 - Screen Cleaning Units Crjlisv Dpy Nop E Umjb Unit 1 Unused and New Condition $20,000.00 USD Unit 2 Used - Excellent Condition $16,000.00 USD

Condition: good (used), Year of construction: 2020, X-axis(mm) - 1020 Y-axis(mm) - 520 Z-axis(mm) - 640 Distance from spindle nose to table surface(mm) - 100-740 Distance from spindle center to the track surface of Z-axis(mm) - 580(*550) Table Dimension(mm) - 1150X520 Crjlowhwtksip E Umeb Max. loading capacity(kgs) - 600 Rapid travel rate(X/Y/Z)(m/min) - 36/36/36 (*48/48/48) Width(mm) - 2600 Length(mm) - 2800 Height(mm) - 2890 Net weight(kgs) - 5500 CNC Controller - Fanuc Oi-MF Plus

Condition: good (used), Year of construction: 2020, operating hours: 1,960 h, The S2-900 provides exceptional dispensing accuracy and repeatability, and is ideal for high-volume manufacturing. The S2-900 dispenses precise small dots and consistent thin lines, coats and underfills in hard-to-reach areas, has a small footprint that maximizes floor-space, and increases throughput. The S2-900 performs with a wide range of fluids, processes, and substrates and easily integrates with jets and valves from Nordson ASYMTEK. Manual available upon request Note - 1. This is a pair of units with a custom conveyor system used to transfer cartridges between 2 systems. 2. 1 Used and 1 unused pair available Cjlevm E Nrjip E Umorb 3. Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: as good as new (ex-display), Year of construction: 2020, Modular high throughput printing device with environmental control (single cell only) with 4 liquid channels with the ability to scale to 8 liquid channels that deliver reagents ability to deliver 10pl to 800pl in a single drop depending on the Piezo dispense capillary (consumable) used. Crelevmktpsip E Umsb The unit offers consistent and highly reproducible reagent delivery with a mechanical precision of the gantry movement is less than 3 µm, and the spot positioning accuracy is typically less than 6 µm. Notes - 1. Scienion will be needed to complete setup/programming IP of resonators still on the equipment (find resonator image) 2. 2 Units available for sale - 1 used; 1 unused 3. Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: good (used), Year of construction: 2020, operating hours: 1,960 h, Functionality: limited functionality, machine/vehicle number: 3201, total length: 3,251 mm, total height: 1,626 mm, total width: 1,168 mm, overall weight: 1,200 kg, The Fuji FW3400CXII/B horizontal flow wrapper is an advanced packaging machine designed for efficient and high-speed wrapping of various products. It uses a single roll of film to encase products, with top film feed and adjustable formers for flexibility. The machine features induction heated sealing rollers for precise temperature control and energy efficiency, along with box-motion end sealers to accommodate a range of product sizes. Capable of up to 300 packs per minute, it ensures consistent, reliable packaging with easy operation via a user-friendly HMI. Ideal for food, pharmaceutical, and other industries, it provides robust, hygienic wrapping solutions. Manual available upon request. Note - Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. Crsliovmcghop E Umeb The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: good (used), Year of construction: 2020, operating hours: 1,960 h, 6-axis articulated Robot & Controller - 9 units available Max Reach: 650mm Max Payload: 5kg Voltage: 1Phase 200-240VAC Frequency: 50/60Hz Max Current: 10Amp Short Circuit Rating: 1.5kA Note - Price mentioned is Ex works. Any expenditures incurred for packaging, handling and logistics would be charged extra to the buyer. Crjlip E Usvzv N Ejmsb Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: good (used), Year of construction: 2019, operating hours: 1,960 h, machine/vehicle number: 594-02462, 4-axis Scara Robot & Controller Max Reach: 600mm Max Payload: 5.5kg Voltage: 1Phase 200-240VAC Frequency: 50/60Hz Max Current: 10Amp Short Circuit Rating: 1.5kA Note - Price mentioned is Ex works. Any expenditures incurred for packaging, handling and logistics would be charged extra to the buyer. Celip Esvzv Hqj Umjrb Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Year of construction: 2020, operating hours: 1,960 h, Condition: good (used), Functionality: limited functionality, Precision Weighing Modules - 22 units available Max Capacity: 220g Readability: 0.1mg Interface: EtherNet/IP, TCP/IP Dimensions(LxHxW): 200mm x 100mm x 25mm Power: Power Over Ethernet Configuration Software: APW-Link Version2.7.2 Note - Price mentioned is Ex works. Any expenditures incurred for packaging, handling and logistics would be charged extra to the buyer. Acknowledgement and disclaimer Crolip E Uevzl A Ujmsb The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: good (used), Year of construction: 2020, operating hours: 1,960 h, Functionality: limited functionality, machine/vehicle number: P10642-A, Enmin electromagnetic vibratory bowl feeder - 2 units available Voltage: 1Phase 240VAC Frequency: 50Hz Cslip Ejvzlu Do Umorb Full load current: 2Amp Note - Price mentioned is Ex works. Any expenditures incurred for packaging, handling and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.