Condition: ready for operation (used), Year of construction: 2007, Edgebander Brandt: Brandt Type: KDF660 Serie nr: 0-261-08-0484 Year: 2007 Return system Brandt: Ligmatech Type: ZHR 01/R/065 Serie no: 0-305-10-1299 Year: 2007 Edgebander equipped with:Pre-routers, cutting units, fine trimmers, radious trimmers, rounding units, scrapers, buffing, release agent, return system Cgob Hlmsvwkrgoa Iet Technical info edgebander: Edging thickness: 0.4 - 12 mm Scissors: max. 3 x 45 mm resp. 0,8 x 65 mm Workpiece thickness: 8 - 60 mm Feed speed: approx. 16 m/min. When selecting form cutters, the feed rate is automatically switched to 11 m/min. Electrical connection: Power 400 volt, 50 Hz, 3 phase 18.4kw, 35AMP Compressed air connection: 6 bar Connection power: approx. 15 kW Machine length: 6 360 mm Technical info return system: Machine length: 6 355 mm Working side: Right Working height: 810 to 950 mm +/- 30 mm Stock no: 2002414BXM

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: HFF 08 Machine no: 08/379 Cgjb Hlmaoq H Spvs Ijt Year model: 2005 Edge cutter for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radii. Tech data: Max edging thickness: approx. 3mm Max workpiece height: 50mm Inner radius min: 40mm Milling motor: 12000 Rpm Work table height: 865mm Max 6 bar Chipboard: 120mm Milling motor: 0.37Kw Motor: 1.5Kw, 50Hz, 400V 3-phase Stock no: 2001922

Condition: ready for operation (used), Year of construction: 1983, Brand: Weinig Model: U 17 A Machine no: 1387-2940 Year of manufacture: 1983 Working height: 1700 mm Ceb Hlsvydwzoma Iegt Working width: 1200 mm 7 spindles in order: Below (4 kW, 5.5 hp), Right (4 kW, 5.5 hp), Left (5.5 kW, 7 hp), Right (4 kW, 5.5 hp), Above (5.5 kW, 7 hp), Under (4 kW, 5.5 hp), Universal (5.5 kW, 7 hp) 40 mm spindles Tiltable feeding-unit Variable feed speed: 6-36 m/min Switch for the security fence Infeed path for planer Brand: Sacot Length: 4000 mm Width: 200 mm Output table Length: 3500 mm Width: 200 mm Lifting table Length: 2350 mm Width: 1200 mm Stock no: 2002037BXM

Condition: ready for operation (used), Year of construction: 2006, Description of the product Brand: Costa Model: TRITT1350 Serial no: A60314LL1 Year of manufacture: 2006 Stock number: 2002440BXA Cgjbjv Hfdvo Hlma Ijt Technical data Working width: 1350 mm Sanding belt size:1380x2620mm Power:400volt, 50 Hz, 3 phase, 51kw, 101AMP 1. sanding unit 1 sanding belt sectioned 2. Sanding unit 2 sectioned sanding shoe 3. sanding unit 3 sectioned sanding shoe 4. cleaning brush 5. blast cleaning 6. Vacuum Motor: 51 kW Size for transport: 320x240x265 cm (lxwxh)

Condition: ready for operation (used), Year of construction: 1999, Roller conveyor & robot Robot: Make: Kawasaki Cjb Hlmjv H Aqaea Iegt Model: UD 100 Serial No: 0289R0S3S Year of manufacture: 1999 Capacity: 100 kg Including protective fence Stock number: 2002448BXM

Condition: ready for operation (used), Year of construction: 1975, Cutting saw Randek Model: 1-5-S Machine no: 431 Cgjb Hlmeldg Skea Iet Year of manufacture: 1975 Tech. info: Blade diam: 700mm Rotating blade in degrees In and out feeder: 4 m in, 5 m out Stock no: 2001525BXM

Year of construction: 1995, Condition: ready for operation (used), Model; Masterwood Type: K 21 Year model: 1995 Tech. info: Number of spindles: 21 CC distance: 32 mm Max distance between spindles: 640 mm Max drilling depth (threaded mount): 83 mm Max drilling depth (quick coupling): 73 mm Work table dimensions: 940x410 mm Max size of workpiece: 880x2500 mm Max thickness of workpiece: 100 mm Spindle speed: 2800 rpm Working pressure: 6-8 bar Cob Hlmaemqlcij Isgt Weight 350 kg Motor: 1.5 kW, 380V, 50 Hz, 3-phase Stock no: 2001568BXA

Condition: ready for operation (used), Year of construction: 1983, Brand: Morbidelli Model: M35/A Year: 1983 Tech data: Spindle speed: 2800rpm Number of spindles: 35 pcs Max distance between outer spindle center: 1088mm Spindle center distance: 32mm Drilling depth: 70mm Engine: 3+3 HP Working pressure: 6-7 atm Weight: 650 kg Machine size: Cgobemv Ehas Hlma Ist 1600x100x160mm CM Weight 650Kg Stock no: 2001582BXA

Condition: ready for operation (used), Year of construction: 2021, Brand: Flex-Trim Type: Stacksander Ceb Hlsv Hyf Iema Iogt Year of manufacture: 2021 Lifting system pmh Stock number: 2002445BXM

Condition: ready for operation (used), Year of construction: 2003, Brand: Burkle Model: SLC Machine no: 10362-02 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Cobjv Hw Hcj Hlma Ijgt Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002442BXM

Condition: good (used), Year of construction: 2005, Functionality: fully functional, Brand: Cefla Model: Easy 2000D Cgjb Hev Inqzelma Ist Serial no: 05079/6 Year: 2005 Renovated with: -New control PLC -New feed carpet -New bearings under carpet -New bearing at recovery Note:Available earliest mid May-2025 Cefla model D automatic sprayer for applying paint to boards and other flat workpieces. The machine with dry filter has 2 holders for spray guns. "Back spray" also enables the application of paint to edges. The endless belt allows leftover paint to be recycled. The most important parts of the machine: Air ventilation equipment Air purification system Paint supply and distribution system Gun drive system Endless conveyor belt Electronic control system Easy sprayer provides: High quality of painted objects, paint that does not hit the workpiece is recycled High production speed High utilization rate of paint Dimensions: 4840x3708x2900mm (lxwxh) NOTE: With reservation for incorrect technical data presented TECHNICAL DATA Control system ED-EASY2000 Max working width including edges 1300mm Max working thickness 70mm Air flow supply fan 10000m3/h, 3 kw Air flow exhaust fan 12000m3/h, motor 7.5kw Paint supply and distribution system Feeder belt speed 1.6-10.6 m/min Variator 1.1 kw Air pressure mat holder 3bar Compressed air consumption 50Nl/min Air pressure feed pump 6bar Air pressure gun spraying 1-4bar Air pressure gun nozzle 5-6 bar Spray gun holder Motor for operating guns 2 kw Spray gun speed 120m/min Sound level 77.5 db in operation Current: 400 volts, 50 Hz, 3 phases, total 18.1 kw, 40 A Maximum motor power 4 kw, 15.6 A

Condition: good (used), Year of construction: 1999, Brand: Lasm Model: NTS 150 C Machine no: 12960 Year of manufacture: 1999 Tech data: Work table size: 950x300mm Oscillation up/down New plastering tape Cgeb Heq Dkq Aolma Iot Plaster tape dimension: 2400x150mm Chip extraction: 100mm Manual tensioning of the plastering tape Scaffolding for plastering tape included, see picture. Oscillation motor: 0.37Kw Motor: 3Kw (4HP), 50Hz, 400V 3-phase Machine size (lxwxh): 1600x600x1650mm Stock no: 2001898

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: AKV 88 D Machine no: 569-P3 Year model: 2005 Tech data: Max edging thickness: approx. 3mm Max working height: 50mm Inner radius min: approx. 8mm Feed speed 0-7 m/min Warm-up time: approx. 6.5 min Motor: 9.3Kw, 50Hz, 400V Machine size (lxwxh): 1360x690x1220mm Weight: approx. 150Kg Cgjbeq Ihxpo Hlma Ist Stock no: 2001921BXA

Condition: good (used), Brand: Striebig Model: Econom 520 6 E/G Machine no: 43941 Tech data: Horizontal saw length: 4250mm Vertical saw length: 2350mm Max sawing depth: 85mm Blade diameter: 300mm Coberh Dads Hlma Iogt Motor: 3Kw, 50Hz, 400V, 3-phase Stock no: 2001739

Condition: ready for operation (used), Brand: Ayen Model: DB 1000 B23 Pneumatically controlled drilling machine Tech. info: Max opening: 820 mm Working width: 720 mm Drilling depth: Horizontal 120 mm, vertical 80 mm Motor: 2,2 kW, 50 Hz, 380 V, 2800 RPM, 3-phase Cgob Hlsri R H Esma Ijt Machine size: 120x80x205 cm (lxwxh) Weight: 275 kg Stock no: 2001012

Condition: ready for operation (used), Compressor plant - Screw compressor and dryer - Tubes and tank included Tech. info, skrew compressor: Brand: Bottarini Model: KSV 30 No: BA34085001 Year of manufacture: 2014 Max pressure: 10 bar Capacity: 4.6 m3/min Weight: 760 kg Motor: 30 kW Tech. info, dryer: Brand: Bottarini Model: KS 28 No: 35496 Year of manufacture: 1999 Max pressure: 10 bar Weight: 340 kg Motor: 18.5 kW, 400 Tech. info, tank: Year of manufacture: 1998 Cgsb Hjrvzf Ielma Ijt Max pressure: 11 bar Temp: 75°C Volume: 920 litres Stock no: 2002048

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cgjb Hlotk It Ssma Iot Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: good (used), Year of construction: 1989, Brand: Costa Model: 70 CT 1150 Machine no: CL8999 Year of manufacture: 1989 - With new carpet Tech. info: Working width: 1150 mm Sanding belt width: 1180 Sanding belt length: 2620 mm 2 units Contact roller Pneumatic sectioned sanding shoe Min/max workpiece thickness: 3/160 mm Working height: 740-900 mm Engine power 1: 15 kW Engine power 2: 11 kW Cjb Hlmstwplioa Iegt Feed motor: 1.1 kW Table lift motor: 0.37 kW Contact roller diameter: 250 mm Contact roller belt speed: 20 m/sec Variable feed speed Compressed air min. pressure: 6 bar Compressed air consumption: 40 N1/min Air speed at extraction nozzles: 28 m/sec Diameter of chipboard: 150 mm Total 29 kW Electricity: 380 V, 50 Hz, 3-phase Weight: 1800 kg Stock no: 2001578BXM

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 1498, Brand: Rema Model: OWK 4/2 Machine no: 1498 Mobile dust extractor New filter bags and new wheel-set. Tech. info: Capacity free flow 3300 m3/h Collection bags 330 m3dm Diameter of dust nozzle: 250 mm Motor: 2.2 kW, 50 Hz, 380 V, 3-phase Stock no: 2001803 Csb Hjtxmzkelma Iogt

Condition: ready for operation (used), Year of construction: 2004, Brand: Hebrock Model: AKV 83 F Year of manufacture: 2004 Machine no: 10759 Technical data: Workpiece thickness: from 10 - 50 mm Feed speed: 3 - 4 m/min Electrical connection: 220/380 Volt, 50 Hz. Power: 3 KW Dimensions: 1750 x 800 x 1250 mm (complete) Weight: approx. 95 kg. Heating: 3 KW, with stepless electronic temperature control, 0 - 650 degrees C Cjb Hlsu Racxema Iegt Motor: 3.5 kW Stock no: 2002311BXA

Condition: ready for operation (used), Year of construction: 1999, Brand: Homag Type: Optimat CH 03/32/32/E Plus Serie no: 0-341-07-5006 Year: 1999 Techn info: Saw width, with fence: 3 200 mm Saw length: 3 200 mm Cutting height: 50 mm Main saw blade: Ø 300 x 75 mm Cob Hlovwku Uema Isgt Scoring saw blade: Ø 125 x 45 mm Main saw speed: 5 100 rpm Scroll saw speed: 5 500 rpm Program carriage feed: 14 m/min Saw carriage feed, forward and return: 6-32 m/min Return feed: 32 m/min Main saw motor power: 5.50 kW Scroll saw motor power: 0.55 kW Operating voltage: 380 V, 50 Hz, 3 phase, 32 amps Control voltage: 24 V DC Floor quality: min. 5 Kp/cm² Connection cable: 5 x 6 mm² 1 fixed, coated front table 1 750 x 400 mm Stock no: 2002415BXM

Condition: ready for operation (used), Brand: Bacci Model: Brevettata The outer spindles are adjustable in degrees and in height Cgoboh S Irvj Hlma Ist Work table size: 700x200 mm Maximum working height: 165 mm Power: 380V, 50 Hz, 3-phase Size for transport: Length: 185 cm Width: 120 cm Height: 165 cm Weight: 950 kg Stock no: 103618BXA

Year of construction: 2022, Condition: new, Spray booth Model:Coral Type:Technodray 2,5 NB Year:2022 Ceb Hloikq Rloma Ijgt Strong construction built in galvanized panels. Standardincluded ventilator with spark proof impeller filter and lamp IP65 NA = standard execution NB = Extended walls and roof Techn info: Ventilator motor 2,2 Kw Working hight 1970 mm Working depth 1330mm Power:400 volt, 50 Hz 3 phase Total dimension: Hight: approx. 2100mm Lenght 2570mm Depth:2375mm Dimension for transport approx. 2600x1400x2200mm (lxwxh) Weight approx.700Kg For waterbased color (not atex) Options: Rotating table Paper filter 60x48mm in cardboard frame Elektric cabinet for start/stop ventilator Stock no: 2000996 OBS!Some pictures shown can be with options not included as standard

Condition: like new (used), Ventilation plant ABB Brand: ABB Type: ABY-80-2120 Complete ventilation system for cooling and heating brief description below what is included: -Control center RW165.02 for air treatment compact unit with control, regulation and monitoring functions -Room temperature sensor - Duct temperature sensor -Outside temperature sensor - Diving temperature sensor -Setpoint converter -Air treatment unit STRATOS ABY - Defrost damper -Air heater water -Cooling battery water -Circulation pumps - Fans Cgob Hlmaolk Hvge Iot -Heat exchanger, water, electricity, battery The plant is still in operation and can be seen on site Contact us for further information if there is interest. Stock no:2001612TKG With reservation for incorrectly presented technical data

Condition: ready for operation (used), Model: KAPRE 2500 Machine no: 463 Cgob Hlsma Ayrema Iet Edge press for solid wood stripes Heat in the plate Max width of workpiece: 50 mm Length: 2500 mm Stock no: 2001658