Condition: new, Year of construction: 2023, operating hours: 1 h, load capacity: 3,500 kg, lifting height: 6,120 mm, free lift: 2,100 mm, mast type: triplex, power: 17 kW (23.11 HP), fork carriage width: 1,150 mm, fork length: 1,200 mm, ground clearance: 80 mm, front tire type: Trelleborg, front tire size: 315/45-12, rear tire type: Trelleborg, rear tire size: 18x7-8, total length: 3,830 mm, wheelbase: 1,800 mm, drive type: Elektro, construction width: 1,320 mm, net weight: 4,123 kg, - Bedienung Sitzgerät - Tragfähigkeit/Last 3500kg - Lastschwerpunkt 500 mm - Lastabstand 468 mm - Achslast mit Last vorn/hinten kg 8042/958 - Achslast ohne Last vorn/hinten kg 2662/2838 - Spurweite vorn/hinten mm 1002/900 - Neigung Hubgerüst/Gabelträger vor/zurück ° 7/7 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 3941 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4141 - Wenderadius 2273 mm - Kleinster Drehpunktabstand 649 mm - Fahrgeschwindigkeit (Blue-Q/Standard/Sprint) mit Last km/h 18/18/20 Dsln U Novfgrlo A Rokl - Fahrgeschwindigkeit (Blue-Q/Standard/Sprint) ohne Last km/h 18/18/21 - Hubgeschwindigkeit (Plus*//Standard Performance) mit Last m/s 0,53//0,44 - Hubgeschwindigkeit (Plus*//Standard Performance) ohne Last m/s 0,57/0,51 - Senkgeschwindigkeit mit Last m/s 0,50 - Senkgeschwindigkeit ohne Last m/s 0,43 - Zugkraft (Plus*//Standard Performance) mit Last N 10300/7590 - Zugkraft (Plus*//Standard Performance) 4 ohne Last N 10650/8015 - Max. Zugkraft (Plus*//Standard Performance) 4 mit Last N 20900/16920 - Max. Zugkraft (Plus*//Standard Performance) 4 ohne Last N 20290/17170 - Steigfähigkeit (Plus*//Standard Performance) 4 mit Last % 17,8/12,9 - Steigfähigkeit (Plus*//Standard Performance) 4 ohne Last % 28,2/21,9 - Max. Steigfähigkeit (Plus*//Standard Performance) 4 mit Last % 24,2/20,6 - Max. Steigfähigkeit (Plus*//Standard Performance) 4 ohne Last % 2482/28,2 - Beschleunigungszeit 15 m (Plus*//Standard Performance) mit Last s 5,7/6,3 - Beschleunigungszeit 15 m (Plus*//Standard Performance) ohne Last s 5,0//5,4 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Umschlagleistung (Plus*//Standard Performance) t/h 258/245 - Energieverbrauch bei Umschlagleistung (Plus*//Standard Performance) kWh/h 8,6/8,0 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l/min 55 - Schalldruckpegel LpAZ (Fahrerplatz) dB(A) 70 - Humanschwingung: Beschleunigung nach EN 13059 m/s² 0,57 - Anhängerkupplung, Art/Typ DIN Bolzen

Condition: good (used), Year of construction: 2002, Functionality: fully functional, Controller MONFORTS Euro Turn Swing dia 320 mm Between centers 1000 mm Swing dia over cross slide 150 mm Dkeln U Nou R Tyds A Rjl Spindle speed 4 - 4000 rpm (in 3 ranges) Chuck dia D200 mm Max weight of wpc between centers 500 kgs Spindle power 10/7 kW Weight of machine 2500 kgs Dimensions LxWxH = 2900 x 1600 x 1800 mm Accessories - New MULTIFIX "E" toolholder with 4 pots - New 3 jaws chuck D160 mm - Chip pan - Coolant unit - Working lamp - Wiring diagram - Machine mounts The machine was used barely by a technical high school.

Year of construction: 2007, Condition: good (used), machine/vehicle number: 53, Proving chamber for 8 carts, made Pietroberto, type PB-CF10T, year of manufacture 2007, series 53, made in Italy. Fermentation chamber volume 12.02 sq. meter ▪ Power: 4kW ▪ Double heating element: 1.8 X 2 kW; ▪ Maximum temperature: 45°C ▪ Siemens fan motor 0,25 kW ▪ Maximum humidity: 90% ▪ With viewing windows at each door. ▪ The room has 4 doors on both sides ▪ With electromechanical switches ▪ With digital control ▪ With a protective barrier, with internal stainless steel walls inside and outside ▪Air conditioning unit and stainless steel fans ▪ Constant regulation of air temperature and humidity ▪ External dimensions: (LxWxH): 2,500 mm x 2,000 mm x 2,300 mm ▪ Internal dimensions (LxWxH): 3,250 mm x 1,850 mm x 2,000 mm ▪ Full aluminium camera structure and frame, just the structure! ▪ It requires an independent water source with a filter on the input phase. The proving chamber is correctly disassembled and correctly stacked, it also has an assembly sketch drawn up at the time of disassembly. Price Euro 2.400 + VAT, FCA Oradea/Romania Dsln U N Ajm Uywao Rokl NOTE: Please take note that this advertisement does not represent a binding offer from us to any interested parties, nor does it contain a request for you to make a binding offer to us. The advertisement is only as a starting point for future contract discussions between us. Please get in touch with us if you're interested in the machine, without obligation using the contact information provided by us or the "Write message" feature, in each instance providing your phone number and email address. After that, we will be pleased to email you our terms and conditions of the sale along with an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2001, Technical details: Dolnowh Dlms U N A Rekl max. wheel diameter: 280 mm max. module: 5 min. module: 1 min. number of teeth: 7 toolpiece turning speed range: 4.000...10.000 U/min tool length: 210 mm CBN *

Condition: excellent (used), HSS saw grinder BUSINARO model Rekord 500 CNC Dkjln U N Aev Ah Rko Rjl

Condition: used, Total area 2140 m² Production line for connecting rods consisting of the following machines: DMC engraving machine, TIPA, built in 2014 Grinding machine, Diskus, built in 1998 Transfer line, EX-CELLO, built in 1998 Transfer line, EX-CELLO, built in 1999 Rotary table system, Mauser, built in 2013 Dsljwh Un Een U N A Rokl Transfer line, EX-CELLO, built in 1998 Transfer line, Nagel, built in 2006 Transfer line, Nagel, built in 2006 Washing system, Sturm, built in 2013 End measuring machine, Thyssenkrupp, built in 1998 We believe the machines are in good used condition and can be inspected live by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in technical data and information, as well as prior sale!

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Djln Uovwgpbo N A Rekl Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders

Condition: new, Year of construction: 2025, neu 2025 090054 prompt, Zwischenverkauf v Spanien 16900 € 346.45 € 1 55 to 250 mm 5 40/10 mm 20 mm 37 1/min 300x15 mm 120x10 mm 40 mm 10 mm 5 kW 1670 mm 1160 mm 2090 mm 1390 kg 2 foot pedal for independent working on 2 stations flatsteel station anglesteel station round- and square steel station rectangular notching station punching station table on flat steel station table on punching station table on notching station complete with hydraulic oil user manual in GERMAN and ENGLISH Dkoln Usvvcf Nj N A Rsl OPTION: Kit € 930,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm

Year of construction: 2009, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 0460013, We sell a Revent 4 doors proofer for 8 racks, model:PB06/1Xeb10, MFG 2009, excellent condition. The profer is dismantled properly and has a montage schema. Made in Sweden Voltage: 3 Ph 380-400 V + N+ PE 50 Hz; Total load 10,5-11,5 kW Heat capacity 10-11 kW Rated current 17-17,8 A Total weight dismantled with the stainless steel floor approx. 600 kg. Dkeln Uswh Unxj N A Rsl Price Euro 3.200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, length in total 2000 / 2700 mm Deln U Neulntms A Rskl total power requirement 0,5 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 2,7 x 0,6 x 0,3 m Slide-in spiral conveyor Suitable for GILDEMEISTER ASH 160, among others

Condition: like new (used), Year of construction: 2017, length 650 mm height 1000 mm welding current stepless 5 - 350 A Dsln U N Aevwguqo Rokl voltage 3x400 V frequency 50 Hz weight of the machine ca. 50 kg dimensions of the machine ca. 650 x 300 x 1000 mm

Condition: used, Year of construction: 2015, gebraucht 2015 7290 prompt, Zwischenverkauf v Türkei 21400 € 1 40 to 630 mm Dksln Uouhc Ucs N A Rsl 450 mm 150 mm 5 - 75 mm 153 1/min 415 x 275 mm 68 mm 40 mm 230 mm 280 mm 4 kW 1300 mm 1700 mm 2150 mm 2950 kg 8 Führungen Aufspannplatte Lichtschrankenschutz 2-Handbedienpult und Fußpedal manuelle Zentralschmierung Betriebsanleitung in Deutsch mit CE Konformitätserklärung

Condition: excellent (used), Year of construction: 1995, 1 1 output 4 kw weight 150 kg Dkoln U N Aovwguks Rel

Condition: excellent (used), Year of construction: 2002, 1 1 Dkjlnovwgt To U N A Rsl output 3 kw weight 50 kg

Condition: like new (used), Year of construction: 2022, x-travel 2500 mm y-travel 3500 mm z-travel 1500 mm Control HEIDENHAIN TNC 640 c-axis +-360 ° milling head -swivable ° milling head swivable ca. +-360 ° table dimension - longitudinal 2500 mm table dimension - cross 3500 mm table load 6 t/m² coolant IKZ 70 bar Feed speed 60 m/min. spindle turning speed range 24000 U/min tool taper HSK-A63 milling spindle motor S6 (40% / 2 min) 41 kW max. torque on the spindle S6 (40% / 2 min) 49 Nm milling spindle motor S1 (100% / 2 min) 34 kW max. torque on the spindle S1 (100% / 2 min) 39 kW tool change unit 60 Pos. weight of the machine ca. 74 t dimensions of the machine ca. 4 x 7.5 x 5.4 m This thermosymmetrical. Ergonomic. Universal ZIMMERMANN FZU32 portal milling machine is in mint condition and can be secured under power can still be secured under power at the seller. DESCRIPTION: The FZU32 is a remarkably compact 5-axis portal milling machine for machining aluminium machining of aluminium, fibre composites, plastics, ureol and steel. steel. Thanks to the particularly rigid, newly developed centre-guiding gantry, we can meet the increasing requirements in model, tool and mould making. mould making. This thermo-symmetrical design makes the FZU32 less susceptible to adverse environmental conditions. Dkeln U Novwgtye A Rsl

Condition: excellent (used), Year of construction: 2016, x-travel 950 mm y-travel 850 mm z-travel 650 mm Control HEIDENHAIN TNC 640 Dkjln Uovwgrpe N A Rsl spindle turning speed range 20000 U/min tool taper HSK-A 63 coolant IKZ 40 bar swivable table: 850 x 750 mm c-axis 360° tool change unit 60 Pos. weight of the machine ca. 14 t This DMG DMU 95 monoBLOCK is in very good condition and can be inspected under power at the seller's premises by prior arrangement. Technical data: Clamping surface table C-axis: 850 x 750 mm Clamping surface rigid table: 1,000 x 750 mm Control: 3D control HEIDENHAIN TNC 640 Spindle speed: 20,000 rpm Spindle power: 35 kW (40% ED) / 25 kW (100% ED) Tool holder: HSK-A 63 according to DIN 69893 Tool changing device: Double gripper Magazine slots: 60 (chain magazine) Connected load: 50 kVA Coolant system IKZ: 40 bar / 23 l/min through spindle centre (AD) External coolant supply: 4 bar / 40 l/min EQUIPMENT and DESCRIPTION - MPC Machine Protection Control chip tray with integrated coolant tank 500 l - Scraper belt chip conveyor with coolant system 600 litres, paper belt filter - Infrared measuring probe HEIDENHAIN TS 649 - 3D quickSET extension package - Coolant ring nozzle for vertical headstock, 15 water nozzles, 5 air nozzles - Flushing gun with pump 2 bar / 40 l/min - Cooling device Blast air through spindle centre, selectable via M function - Operating mode 4 - Manual intervention with open work area doors - Documentation

Condition: excellent (used), Year of construction: 2008, x-travel 1500 mm y-travel 1300 mm Dkjlsvwgrisn U N A Rel z-travel 600 mm Control HEIDENHAIN TNCi 530 spindle turning speed range 18000 U/min tool taper HSK-A 63 tool change unit 30 Pos. table dimension - longitudinal 2000 mm table dimension - cross 1100 mm spindle drive 26 kW column daylight 1400 mm weight of the machine ca. 19 t dimensions of the machine ca. 5 x 2,4 x 3,6 m This fpt Raid portal milling machine is in very good condition and can be inspected under power at the seller's premises by arrangement. Description: Spindle hours approx.: 15.000h Tool measurement BLUM Laser

Condition: excellent (used), Year of construction: 2012, x-travel 6800 mm y-travel 3400 mm z-travel 2000 mm Control HH iTNC 530 table dimension - longitudinal 6000 mm table dimension - cross 2500 mm table load 150 t tool change unit 80 Pos. dist. between columns - front to rear 4700 mm weight of the machine ca. 80 t dimensions of the machine ca. 12 x 11 x 7 m This portal milling machine is in good condition and can be inspected by arrangement be inspected under power at the seller's premises. Description: - 80-position tool changer with 40 positions ISO SK-50 / 40 positions HSK-63A Djln U N Asvwgpzs Rjkl - 4-fold automatic head changer - 2 pieces orthogonal milling head OAD with: --> Patented double Hirth serration with a pitch of 0.02 degrees --> Pitch of both swivelling axes 0.02 ° --> Tool holder ISO SK-50 --> Spindle speed: 20-6000 rpm --> 46kW drive power (100% ED S1) - 1 piece 2-axis fork milling head E5E (CAC II) with: --> simultaneous !! --> HSK-63A tool holder --> swivelling range C-axis: +/- 200° --> swivelling range B-axis: +/- 100° --> drive power 37kW --> Spindle speed max. 24000 rpm, 1 vertical spindle F-400 --> Spindle speed 4000 rpm --> drive power 25kW IKZ 38bar with paper belt filter 2 chip conveyors (lengthwise channelling belt conveyor 1 cross conveyor Heidenhain longitudinal measuring rods in all three axes Z-axis with 4-fold linear guide Wireless measuring probe M&H 20.41 Multi BRANKAM machine protection system CMS-100 (collision protection) Working area cover (roof) can be opened at the rear and front BLUM tool measurement Heidenhain HR 550 FS radio handwheel X and Y-axis drive via rack and 2 pinions Z-axis drive via ball screw

Condition: excellent (used), Year of construction: 2008, table length 4000 mm table width 1500 mm burner heads 1 Control SIEMENS 840D Capacity 6000 Watt speed 10 m/min weight of the machine ca. 19 t dimensions of the machine ca. 9,5 x 7,3 x 3,1 m This Trumpf TrueLaser Cell (TLC) 7040 with 6 KW is a 5-axis laser machine. Description: - Max. Sheet thickness: ST:20mm / VA:20mm / AL:15mm - Closed machine room Dolnsu N I Ere U N A Rjkl - Laser TruFlow 6000 - ADC cutting head - Positioning laser diode - Suspended control panel stationary, rotatable - Teach panel - Magnetic coupling, head detection - Laser power control - Power cycles - Laser welding

Condition: excellent (used), sheet width 2500 mm plate thickness 4 mm Control GPN weight of the machine ca. 5000 t dimensions of the machine ca. 3000 x 2000 x 1700 m Dkeln Ujvwgpns N A Rel

Condition: good (used), Year of construction: 1999, x-travel 2400 mm y-travel 2850 mm Deln Uovwgphs N A Rokl z-travel 1000 mm Control FIDIA C20 table dimension - longitudinal 2200 mm table dimension - cross 1800 mm table load 12 t workpiece tool changer 30-fach tool taper ISI SK-50 spindle turning speed range 5000 U/min power capacity - milling spindle 30 kW

Condition: excellent (used), Year of construction: 2016, pressure 400 t chamfer lenght 6100 mm distance between columns 5050 mm stroke 600 mm distance between table / ram 870 mm throat 600 mm table width 300 mm closing speed 100 mm/sec working feed 11 mm/sec return speed 120 mm/sec total power requirement 37 kW weight of the machine ca. 45 t Delnou N Iy Ns U N A Rekl

Condition: good (used), Year of construction: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm control SIEMENS 840D Dkolovwglvon U N A Rjl table load 12 t height over floor 6300 mm table dimension - longitudinal 5000 mm table dimension - cross 2500 mm no. of tables 2 tool change unit 200 -fach weight of tools max. 30 kg tool taper HSK A 100 diameter of tools max. 250 mm workpiece length 500 mm spindle turning speed range 5-6000 U/min c-axis -10 bis 370 ° b-axis 5 bis -95 ° column daylight 3000 mm distance spindle nose and table 1500 mm weight of the machine ca. 161 t dimensions of the machine ca. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec portal milling machine is in very, very good condition and can be beautiful condition and can be inspected by arrangement with the seller.

Condition: excellent (used), Year of construction: 2017, table length 3000 mm table width 1500 mm Dslnsvwgu Do U N A Rskl burner heads 1 Control FANUC AF3500i-C total power requirement 3,5 kW weight of the machine ca. 12,5 t dimensions of the machine ca. 12300 x 6000 x 2200 m

Condition: used, table length 400 mm table width 300 mm x-travel 300 mm y-travel 250 mm z-travel 250 mm weight of the machine ca. 1,2 t Djln Usvwgq So N A Rekl dimensions of the machine ca. 2000 x 1200 x 2500 mm