Used Tension Clamp Assembly for sale (12,961)

Condition: used, 2-sided roll container with clamping gates and nylon lashing straps – hot-dip galvanized transport container 744 liters Djdpfx Aoy R Sr Hsh Iskn This 2-sided roll container with clamping gates is a robust and efficient solution for the safe transport and storage of goods within warehouses, distribution centers, and retail environments. Thanks to its

Condition: good (used), Offer 25348 Technical data: - 15 units 300 x 200 x 100 mm - Left and right versions Dsdpfxsy Nl A Ao Ah Iskn - Total weight approx. 250 kg

Condition: used, 2-sided roll container with clamping gates and nylon lashing straps – hot-dip galvanized transport container 744 liters Dsdpfx Aheyccxao Ijkn This 2-sided roll container with clamping gates is a robust and efficient solution for the safe transport and storage of goods within warehouses, distribution centers, and retail environments. Thanks to its

Condition: used, Refurbished 2-rack roll cage is a practical transportation solution for various applications. Dedpsy Hpy Tjfx Ah Iekn Refurbished refers to the fact that the roll container has been refurbished to bring it back to good condition so that it can be used again. In this case, it is a roll cage with a new roll bottom and used insert gates. Using refurbished

Condition: used, 2-sided roll container with clamping gates and nylon lashing straps – hot-dip galvanized transport container 792 liters Dkedey Hptaopfx Ah Isn This 2-sided roll container with clamping gates is a robust and efficient solution for the safe transport and storage of goods within warehouses, distribution centers, and retail environments. Thanks to its

Condition: used, Used 2 rack roll cage, bearing the Kruizinga trademark, is a practical transport solution for various applications. Djdsy Hprvopfx Ah Iskn Equipped with 2 removable clamp gates made of galvanized steel, keeping the cargo securely in place during transport. Comes standard with 2 nylon straps to keep the goods firmly in place and prevent them from sliding or

Condition: used, Clamping plate, machine table with metal base Clamping table, assembly table, clamping angle plate Clamping surface: 1200 x 370 mm T-slot spacing: 90 mm Table height: 870 mm - The T-slot table was originally a machine table from a milling machine - 4 T-slots, 16 mm - Metal base with height-adjustable feet - Multilayer wood plate L x W x H 1200 x 400 x 18 mm Dkedpowkvi Nofx Ah Ijn Overall dimensions L x W x H 1400 x 770 x 870 mm Weight: 250 kg good condition

Condition: good (used), Clamping bars, clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, fork clamping irons -Tensioning bracket: Fork clamping iron, various designs -Slot width: 15/18 mm (see photos) -Submission/Price: complete -Dimensions: 150/42/H26 mm 2 pcs / 200/50/30 mm 4 pcs / 200/49/30 mm 4 pcs Djdot Rl U Sspfx Ah Ijkn -Transport dimensions: 200/190/H105 mm -Weight: 12.8 kg

Condition: good (used), Clamping bars, clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, fork clamping irons Dodpfxokkzyfe Ah Ijkn -Tensioning bracket: Fork clamping iron, beveled -Type: DIN 6315 B 40 x 400 -Slot width: 40 mm -Dimensions: 405/100/H60 mm -Weight: 10.9 kg

Condition: used, 4 clamping elements, down-hold clamps, heavy-duty clamping jaws, clamping plate LENZKES type 170796 Plate clamps, flat clamps, deep-jaw clamps, deep clamping jaws, low-profile clamps, clamping jaws Length: 280 mm Width: 200 mm Height: 113 mm Clamping plate width: 89 mm Mounting slot distance: 62.5 / 125 mm Dodpfx Aoxy Stgeh Iskn Mounting slot width: 27 mm Mounting slot length: 145 / 185 mm Construction height of mounting slot clamping surface: 58.5 mm - Down-hold action via hex socket screw SW17 - Clamping movement via trapezoidal thread spindle - Reversible jaws for use on either side along the trapezoidal spindle - Reversible clamping jaws with dovetail guide for changing sides - 3 elongated mounting holes for fastening to the machine table Weight per clamp: 15.5 kg Total weight: 62 kg Very robust design Very good condition

Condition: used, Load capacity: 3 t Opening width: 38 mm Dksdpfxeb Nwkxo Ah Isn Weight: 15 kg

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -with chain: 1.3 m -Span width: 44 to 70 mm -Load capacity: 6300 kg -Dimensions: 300/460/H120 mm -Weight: 30 kg Dkjdpfx Ahsd Hb Ims Isn

Condition: good (used), Panel lifting clamp, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper Dedpfx Ahedi Smle Iokn -Sheet metal claw -Wingspan: up to 152 mm -Load capacity: 2500 kg -Number: 1x terminal available -Price: per piece -Weight: 29 kg/piece

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M11360*17766, Year of construction: 2018, load capacity: 12,000 kg, lifting height: 6,500 mm, The technical data are taken from the original order confirmation. The seller cannot guarantee that these correspond to the current condition. TECHNICAL DETAILS Lifting capacity: 12,000 kg at a load center of 1,200 mm Mast: Duplex standard Lift height: 6,500 mm Collapsed height: 4,895 mm Extended height: 8,100 mm Tilt: 5° forward / 10° backward MACHINE DETAILS Dimensions (L x W x H): 5,205 x 2,550 x 2,905 mm Wheelbase: 3,500 mm Engine: Volvo TAD-871-VE / 6-cylinder / eco-friendly engine with CAN bus (EU Stage IV), 185 kW at 2,200 rpm, 1,160 Nm, displacement 7.7 L STEINWEG Stone Stack Grab Type HG1T-6000S TECHNICAL DETAILS Clamping range: 0.96–1.00 m Opening range: approx. 0.6–1.3 m Clamping height: 1.3 m Lifting capacity: 6,000 kg Double clamp bars: 1 pair, with cushioned plastic jaws, length 2.3 m Mounting: Pendulum suspension EQUIPMENT Manufactured in a robust and clean welded construction Splayed clamp arms mounted rotatably With hydraulic cylinders, required valves, pipes, and fittings Including oil pressure manometer and connection hoses to the rotator Additionally: one pressure gauge mounted 180° opposed to the standard manometer LIFTING ARM & EXTENSION TECHNICAL DETAILS Extension: 1.6–2.1 m Lifting capacity: 8,000 kg at an outreach of 1.6–2.1 m EQUIPMENT 1 piece forklift lifting arm, twin beam, with endless rotator and pendulum suspension Including connection hoses to forklift 1 piece hydraulic extension with telescopic cylinder 1 stabilizer (2 pcs) for pendulum motion compensation Integrated side shifter in slide guides, travel: 250 mm RADIO PRESSURE MONITORING (Clamping Pressure) Radio frequency: 868.4 MHz Dodjy T Edhspfx Ah Iskn Ambient temperature range: -30°C to +85°C Power supply: Lithium battery 3.6 V Battery life: approx. 1 year at 5-second intervals EMC System / Cabin & Operation EMC system: Electronic control with 7" touch screen Driver's seat: BeGe 9100 Cabin: OPTIMA – ergonomic safety comfort cabin High noise and vibration damping Hydraulically tiltable to the side ADDITIONAL EQUIPMENT Front mud flaps Rear mud flaps Exterior mirrors on fender (high) Turbo II heavy-duty air filter Additional hydraulic functions Quick couplings on the fork carriage Accumulator/vibration damper 60 bar / 2 L in the lifting function Hydraulic oil tank pre-heating Additional LED headlights, 2 × on the mast Reversing alarm LED beacon Electrical cables over the mast Power connection 400 V, 3-phase Blue Spot front and rear EMC 107 electronic weight display (0.1 t) EMC 114 electronic joystick with RPM increase EMC 122 speed limiter 20 km/h, switchable to 15 km/h Electric seat heating DAB/analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers Intermittent wiper ACC air conditioning SMV universal mounting rail Movable A4 writing pad LED reading lamp Diesel parking heater + engine water heater Sun visor (roof/front) Panorama rearview mirror Preparation for attachments from other manufacturers Central lubrication base, 14 points

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND Authorized Dealer - All items in stock! !! SPECIAL OFFER !! SIEGMUND Retro Welding Table 2400x1200x200 mm, accessories included SIEGMUND welding table just like 25 years ago with plasma nitriding and modern table legs Product description - Table dimensions: 2400x1200x200 mm - High-quality S355J2 steel with plasma nitriding - Material thickness approx. 24.5 â?? 27 mm - Hole diameter 28 mm - Drill holes in 100x100 mm grid - Corners, edges, and drill holes chamfered at 45° - Side panel height 200 mm - Drill holes in side panels in a diagonal grid - Construction reinforced with ribs Plasma-nitrided version: - Protection against rust / scratches / weld spatter adhesion Dkodpfx Ahsxflftj Ien - Corrosion-resistant / higher load-bearing capacity Specifications: - 28-hole pattern / Dimensions 2400 x 1200 x 200 mm - Plasma-nitrided version - Includes 4x base feet (basic configuration) - Includes accessory set (see Image 3): * 6x 280604 * 12x 280511 * 8x 280420.N * 2x 280110.N * 1x 283999

Year of construction: 2023, condition: used, Pressing force 53 t stroke 300 mm control Siemens Pneumatic system pressure 6 bar Maximum supply pressure of the pneumatic system 10 bar Pressure in the hydraulic system 255 bar Dimensions (HxWxD) 3.200 x 2.500 x 2.350 mm weight 8.000 kg In our assessment, the bushing press is in like-new condition. Technical features: Dkodpozbvm Ijfx Ah Isn - Bushing pressing including plastic deformation - TOX pneumatic-hydraulic actuator with 53t pressing force at 6 bar - 300mm stroke - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2023, voltage 400V, 50Hz V Dkodezbvmhspfx Ah Isn current intensivity 40 A output 15 kw operating pressure 4,5 bar weight 1.600 kg In our assessment, the assembly system is in like-new condition. Technical features: - Assembly system for pressing individual parts into a battery cooling plate - Pressing process using pneumatic cylinders and servo motors - Pneumatic suction of the cooling plate - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: used, Year of construction: 2023, dimensions 0,70 x 0,50 x 0,10 m weight 200 kg In our assessment, the zero-point clamping system is in good used condition. There are 2 units available. Price per unit Accessories, tools, and clamping devices shown are only included in the scope Dsdozbvi Nepfx Ah Ijkn of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 1,400 kg, empty load weight: 380 kg, drive type: Keine, Cellulose/Bale Clamp Load Center: 500 mm Dkedpfezbn Eisx Ah Ion ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: None Technical Condition: Good Description: Type 1.5T413, sideshift +/- 100 mm, sideshift independent of the opening range, overall width 970 mm, opening range 495 - 1,675 mm, arm height 440 mm, arm length 1,000 mm, arms smooth on the outside, inside with round bar, arm tips beveled, load capacity 1,400 kg at 500 mm load center, installation depth 158 mm, own center of gravity at 289 mm, weight approx. 380 kg, incl. pressure gauge, connection ISO - Class 2 A.

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table Dkodpfx Ahsink S Ns Ien -Clamping angle: for workpiece clamping -Table surface: 500 x 525 mm, height 500 mm -Wall thickness: 25 mm -Grooves: 175 x 30 mm -Holes: Ø 25 mm -Dimensions: 500/525/H500 mm -Weight: 124 kg

Condition: good (used), Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press -Mounting plate: Mounting plate with straightening press -Length: 3260 mm -Width: 1380 mm -Piston diameter: Ø 63 mm -Stroke: 200 mm -Pressure force: t Dsdpjzbhqxefx Ah Iekn -Overall dimensions: 3260/1380/H1940 mm -Weight: 2820 kg

Condition: good (used), Clamping plate with T-slots, plate panel, welding table, T-slot plate, clamping plate, scribing and marking plate, measuring plate, measuring table, leveling plate, scribing plate Dsdpfsza Sxwex Ah Iokn -Mounting plate: T-slot plate with solid base frame -Length: 3030 mm -Width: 3000 mm -Groove width: 25 mm -Dimensions: see photos -Overall dimensions: 3030/3000/H500 mm -Weight: 4500 kg

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, T-slot plate, clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -T-slot plate: clamping plate on solid base frame -Length: 3200 mm -Width: 1625 mm -Groove width: 30 mm Dedpfxjv D Hkro Ah Iokn -Dimensions: see drawing in the photos -Dimensions total: 3200/1625/H720 mm -Weight: 2300 kg

Condition: used, Clamping plate, clamping table, machine table – HOME-MADE Can also be used as a straightening plate or welding plate. Table surface: 2150 x 1040 mm Overall height: 200 mm - Top and bottom surfaces are parallel and machined, surfaces are planed. - Table plate dimensions: L x W x H = 2150 x 1040 x 65 mm - Table plate has several symmetrical holes. Dkjdpfstqgnyox Ah Isn Table plate with M16 and M24 threaded holes: M16, M24, M16, M24, etc. Hole spacing in the length: approx. 250 mm Hole spacing in the width: approx. 255 / 165 / 255 mm - 6 double T-beams welded onto the steel plate. Double T-beam dimensions: L x W x H 2150 x 125 x 135 mm Distance between the double T-beams: 50 to 55 mm Weight: 1730 kg Good condition.

Condition: excellent (used), high-precision HEMO clamping block, grade 2 Length = 135 mm + 12 mm stop plate Width = 120 mm = slot length Dedjzb Ngnspfx Ah Iokn